Safari and Quictime with dynamic innerHTML

I'm working on a website that is doing some cool things with safari and quicktime. The site dynamically updates the media window with a new playlist using ajax, however redrawing the new QuickTime object in the same div causes multiple quicktime players to overlap and play.
Safari is the only browser that has this issue, all other browsers drop the previous quicktime object and creates a new one. Even if I set the innerHTML to null, it seems that safari wants to keep running the player.

You might be better served posting this in the developers forum.

Similar Messages

Slow Safari and Firefox with sys. 10.4.11

Since installing sys. 10.4.11 both Safari and Firefox have become extremely slow. Safari can take 25, 30 or more seconds to open a page. I haven't noticed a speed change in other apps. I have a DSL router which serves 4 computers. Sys. 10.4.8 was much faster. Any ideas are welcome.
Thanks.

I've experienced the same thing. Thought it was my DSL ISP and complained numerous times. Went from avg. 2600 kbps down/ 768kbps up to 860 kbps down and 13 kbps up. This range is consistent on all machines on my network, and with both Firefox and Safari. Last night, I hooked up my IBM lap top and re-ran the test: got 2586 kbps down and 457 kbps up on the PC. Now I think my ISP may be correct -- they don't see a problem with the lines. Looking back, the slow down for the Macs coincides with 10.4.11 updates. Tonight I'll begin looking at the Macs to see why they can't connect at the same rate as before the update, and at the same rate as the PC. Any suggestions on how to restore Mac performance?

Help with CISCO-887VA adsl over pots and PPPoE with dynamic IP

Hi
I've got problem trying to connect the CISCO-887VDSL/ADSL OVER POTS ROUTER to internet. Only got the LAN part working.
I'm trying to setup PPPoE with dynamic IP
Followed CISCO's documentations but the commands used were not recognized by the router. Any simple working config for me to follow will be enough.
I'll appreciate any help. Thanks a lot!
here's my config.
! Last configuration change at 08:31:51 UTC Sat Feb 11 2012
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
crypto pki token default removal timeout 0
ip source-route
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server x.x.x.x x.x.x.x.x
lease 0 2
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGLxxxxxxx
controller VDSL 0
ip ftp username cisco
ip ftp password cisco
interface Ethernet0
pppoe enable group global
pppoe-client dial-pool-number 1
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip directed-broadcast
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxx
ppp chap password 0 xxxx
ppp pap sent-username xxxx password 0 xxxx
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip access-list standard 1
permit 10.0.0.0 0.0.0.255
no cdp run
line con 0
line aux 0
line vty 0 4
login
transport input all
end

Try to check with your ISP the modem string to use for VDSL
and some ISP support direct dhcp on Ethernet0 without PPPoE.
An equivalent config is working for me in Switzerland with Swisscom.
N.B. "modem" under VDSL controller is enable using service internal !
service internal
controller VDSL 0
operating mode vdsl2
modem co5
ip source-route
ip cef
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server 8.8.8.8
lease 0 2
interface Ethernet0
ip address dhcp
ip nat outside
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
ip nat inside source list 23 interface Ethernet0 overload
access-list 23 permit 10.0.0.0 0.0.0.255
end

I lost my Safari and iTunes with IOS6

Upon upgrading to iOS6, my iPad 2 seems to have lost SAFARI and iTunes. Settings shows I have Safari in iCLOUD, but I do not have an icon on the mainscreen to use it. Nor do I have iTunes icon. I do an iPad search for them with no luck of finding them. Anyone have any ideas?!?! HELP!!

If you can't find them on any of your homescreens or app folders, and you can't find them via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > iTunes and Safari being set 'off' ?

Safari and Sites with Untrusted certificates

On my old iPhone 3GS i was able to connect to my work's wireless network by going into Safari and accepting the untrusted certificate that my company has on it's wireless log on page. But now with the iPhone 4, when it comes up with the request to confirm the certificate, Safari crashes and returns to the home screen, is this a know problem with sites like this?

Similar for me. I try to access my work (Fed Govt) email via the web at an https address and mobile safari asks me to accept the certificate. I do, and it crashes. Worse yet, I called Apple to bring the issue to their attention, they went to 2nd or 3rd tier support and came back to me and said its "3rd party" contact them... VERY dissapointed! This same site loaded fine under iPhone OS 3x
I even tried to export the cert from mac's keychain and installing it via the iPhone config utility. Even with the profile there, the phone does not recognize the website certificate and asks me to accept it... and it crashes yet again.

IPad Safari and websites with Adobe applications

As you all know, most of interactive websites uses the Adobe Applications especially Flash Player for the interactive experiance. Why don't Apple come up with a compatibility tool to be add to iOS or the iOS version of Safari and get the most of these websites? Since i got my iPad and iPhone before that and i forgot my laptop; it would be a complete dependancy experiance if the iPad can function as a laptop or even better. I believe that Apple can send us to the next level of the pad experiance.
Is there a solution?
Message was edited by: Athican

Thank you Tom for your help but unfortunetly iSwifter is limited to a wi-fi connection only and does not support 3G connection.
Barbara, i agree with you about governments, but my point was, if i'm changing to the mobile experiance and depend on it in all my (on the go) transactions, why don't i have the full experiance? the iOS operating system is a solid base for mobile developers to work on rather then developing an app for every function and i'm not talking about Adobe applications only if you get my point.
Until then, i'll go back to my big and heavy Mac Book pro to make these transactions...
Message was edited by: Athican

BULK COLLECT and FORALL with dynamic INSERT.

Hello,
I want to apply BULK COLLECT and FORALL feature for a insert statement in my procedure for performance improvements as it has to insert a huge amount of data.
But the problem is that the insert statement gets generated dynamically and even the table name is found at the run-time ... so i am not able to apply the performance tuning concepts.
See below the code
PROCEDURE STP_MES_INSERT_GLOBAL_TO_MAIN
(P_IN_SRC_TABLE_NAME                  VARCHAR2 ,
P_IN_TRG_TABLE_NAME                  VARCHAR2 ,
P_IN_ED_TRIG_ALARM_ID                 NUMBER ,
P_IN_ED_CATG_ID                 NUMBER ,
P_IN_IS_PIECEID_ALARM IN CHAR,
P_IN_IS_LAST_RECORD IN CHAR
IS
      V_START_DATA_ID                 NUMBER;
      V_STOP_DATA_ID                   NUMBER;
      V_FROM_DATA_ID                   NUMBER;
      V_TO_DATA_ID                       NUMBER;
      V_MAX_REC_IN_LOOP              NUMBER := 30000;
      V_QRY1         VARCHAR2(32767);
BEGIN
            EXECUTE IMMEDIATE 'SELECT MIN(ED_DATA_ID), MAX(ED_DATA_ID) FROM '|| P_IN_SRC_TABLE_NAME INTO V_START_DATA_ID , V_STOP_DATA_ID;
            --DBMS_OUTPUT.PUT_LINE('ORIGINAL START ID := '||V_START_DATA_ID ||' ORIGINAL STOP ID := ' || V_STOP_DATA_ID);
            V_FROM_DATA_ID := V_START_DATA_ID ;
            IF (V_STOP_DATA_ID - V_START_DATA_ID ) > V_MAX_REC_IN_LOOP THEN
                    V_TO_DATA_ID := V_START_DATA_ID + V_MAX_REC_IN_LOOP;
            ELSE
                   V_TO_DATA_ID := V_STOP_DATA_ID;
            END IF;
          LOOP
                BEGIN
             LOOP
                        V_QRY1 := ' INSERT INTO '||P_IN_TRG_TABLE_NAME||
                        ' SELECT * FROM '||P_IN_SRC_TABLE_NAME ||
                        ' WHERE ED_DATA_ID BETWEEN ' || V_FROM_DATA_ID ||' AND ' || V_TO_DATA_ID;
                EXECUTE IMMEDIATE V_QRY1;
commit;
                                 V_FROM_DATA_ID := V_TO_DATA_ID + 1;
                        IF ( V_STOP_DATA_ID - V_TO_DATA_ID > V_MAX_REC_IN_LOOP ) THEN
                              V_TO_DATA_ID := V_TO_DATA_ID + V_MAX_REC_IN_LOOP;
                        ELSE
                              V_TO_DATA_ID := V_TO_DATA_ID + (V_STOP_DATA_ID - V_TO_DATA_ID);
                        END IF;
                EXCEPTION
                         WHEN OTHERS THEN.............
....................so on Now you can observer here that P_IN_SRC_TABLE_NAME is the source table name which we get as a parameter at run-time. I have used 2 table in the insert statement P_IN_TRG_TABLE_NAME (in which i have to insert data) and P_IN_SRC_TABLE_NAME(from where i have to insert data)
V_QRY1 := ' INSERT INTO '||P_IN_TRG_TABLE_NAME||
                        ' SELECT * FROM '||P_IN_SRC_TABLE_NAME ||
                        ' WHERE ED_DATA_ID BETWEEN ' || V_FROM_DATA_ID ||' AND ' || V_TO_DATA_ID;
                EXECUTE IMMEDIATE V_QRY1;now when i appy the bulk collect and forall feature i am facing the out of scope problem....see the code below ...
BEGIN
            EXECUTE IMMEDIATE 'SELECT MIN(ED_DATA_ID), MAX(ED_DATA_ID) FROM '|| P_IN_SRC_TABLE_NAME INTO V_START_DATA_ID , V_STOP_DATA_ID;
            --DBMS_OUTPUT.PUT_LINE('ORIGINAL START ID := '||V_START_DATA_ID ||' ORIGINAL STOP ID := ' || V_STOP_DATA_ID);
            V_FROM_DATA_ID := V_START_DATA_ID ;
            IF (V_STOP_DATA_ID - V_START_DATA_ID ) > V_MAX_REC_IN_LOOP THEN
                    V_TO_DATA_ID := V_START_DATA_ID + V_MAX_REC_IN_LOOP;
            ELSE
                   V_TO_DATA_ID := V_STOP_DATA_ID;
            END IF;
          LOOP
                DECLARE
                 TYPE TRG_TABLE_TYPE IS TABLE OF P_IN_SRC_TABLE_NAME%ROWTYPE;
                 V_TRG_TABLE_TYPE TRG_TABLE_TYPE;
                 CURSOR TRG_TAB_CUR IS
                 SELECT * FROM P_IN_SRC_TABLE_NAME
                 WHERE ED_DATA_ID BETWEEN V_FROM_DATA_ID AND V_TO_DATA_ID;
                 V_QRY1 varchar2(32767);
                BEGIN
                OPEN TRG_TAB_CUR;
                LOOP
                FETCH TRG_TAB_CUR BULK COLLECT INTO V_TRG_TABLE_TYPE LIMIT 30000;
                FORALL I IN 1..V_TRG_TABLE_TYPE.COUNT
                V_QRY1 := ' INSERT INTO '||P_IN_TRG_TABLE_NAME||' VALUES V_TRG_TABLE_TYPE(I);'
                EXECUTE IMMEDIATE V_QRY1;
                EXIT WHEN TRG_TAB_CUR%NOTFOUND;
                END LOOP;
                CLOSE TRG_TAB_CUR;
                        V_FROM_DATA_ID := V_TO_DATA_ID + 1;
                        IF ( V_STOP_DATA_ID - V_TO_DATA_ID > V_MAX_REC_IN_LOOP ) THEN
                              V_TO_DATA_ID := V_TO_DATA_ID + V_MAX_REC_IN_LOOP;
                        ELSE
                              V_TO_DATA_ID := V_TO_DATA_ID + (V_STOP_DATA_ID - V_TO_DATA_ID);
                        END IF;
                EXCEPTION
                         WHEN OTHERS THEN.........so on
But the above code is not helping me , what i am doing wrong ??? how can i tune this dynamically generated statement to use bulk collect for better performace ......
Thanks in Advance !!!!

Hello,
a table name cannot be bind as a parameter in SQL, this wont't compile:
EXECUTE IMMEDIATE ' INSERT INTO :1 VALUES ......
USING P_IN_TRG_TABLE_NAME ...but this should work:
EXECUTE IMMEDIATE ' INSERT INTO ' || P_IN_TRG_TABLE_NAME || ' VALUES ......You cannot declare a type that is based on a table which name is in a variable.
PL/SQL is stronly typed language, a type must be known at compile time, a code like this is not allowed:
PROCEDURE xx( src_table_name varchar2 )
DECLARE
   TYPE tab IS TABLE OF src_table_name%ROWTYPE;
...This can be done by creating one big dynamic SQL - see example below (tested on Oracle 10 XE - this is a slightly simplified version of your procedure):
CREATE OR REPLACE
PROCEDURE stp1(
p_in_src_table_name                  VARCHAR2 ,
p_in_trg_table_name                  VARCHAR2 ,
v_from_data_id     NUMBER := 100,
v_to_data_id       NUMBER := 100000
IS
BEGIN
EXECUTE IMMEDIATE q'{
DECLARE
     TYPE trg_table_type IS TABLE OF }' || p_in_src_table_name || q'{%ROWTYPE;
     V_TRG_TABLE_TYPE TRG_TABLE_TYPE;
     CURSOR TRG_TAB_CUR IS
     SELECT * FROM }' || p_in_src_table_name ||
     q'{ WHERE ED_DATA_ID BETWEEN :V_FROM_DATA_ID AND :V_TO_DATA_ID;
BEGIN
      OPEN TRG_TAB_CUR;
      LOOP
            FETCH TRG_TAB_CUR BULK COLLECT INTO V_TRG_TABLE_TYPE LIMIT 30000;
            FORALL I IN 1 .. V_TRG_TABLE_TYPE.COUNT
            INSERT INTO }' || p_in_trg_table_name || q'{ VALUES V_TRG_TABLE_TYPE( I );
            EXIT WHEN TRG_TAB_CUR%NOTFOUND;
      END LOOP;
      CLOSE TRG_TAB_CUR;
END; }'
USING v_from_data_id, v_to_data_id;
COMMIT;
END;But this probably won't give any performace improvements. Bulk collect and forall can give performance improvements when there is a DML operation inside a loop,
and this one single DML operates on only one record or relatively small number of records, and this DML is repeated many many times in the loop.
I guess that your code is opposite to this - it contains insert statement that operates on many records (one single insert ~ 30000 records),
and you are trying to replace it with bulk collect/forall - INSERT INTO ... SELECT FROM will almost alwayst be faster than bulk collect/forall.
Look at simple test - below is a procedure that uses INSERT ... SELECT :
CREATE OR REPLACE
PROCEDURE stp(
p_in_src_table_name                  VARCHAR2 ,
p_in_trg_table_name                  VARCHAR2 ,
v_from_data_id     NUMBER := 100,
v_to_data_id       NUMBER := 100000
IS
V_QRY1 VARCHAR2(32767);
BEGIN
      V_QRY1 := ' INSERT INTO '||   P_IN_TRG_TABLE_NAME ||
                ' SELECT * FROM '|| P_IN_SRC_TABLE_NAME ||
                ' WHERE ed_data_id BETWEEN :f AND :t ';
      EXECUTE IMMEDIATE V_QRY1
      USING V_FROM_DATA_ID, V_TO_DATA_ID;
      COMMIT;
END;
/and we can compare both procedures:
SQL> CREATE TABLE test333
2 AS SELECT level ed_data_id ,
3            'XXX ' || LEVEL x,
4            'YYY ' || 2 * LEVEL y
5 FROM dual
6 CONNECT BY LEVEL <= 1000000;
Table created.
SQL> CREATE TABLE test333_dst AS
2 SELECT * FROM test333 WHERE 1 = 0;
Table created.
SQL> set timing on
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2     FOR i IN 1 .. 100 LOOP
3        stp1( 'test333', 'test333_dst', 1000, 31000 );
4     END LOOP;
5* END;
SQL> /
PL/SQL procedure successfully completed.
Elapsed: 00:00:22.12
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2     FOR i IN 1 .. 100 LOOP
3        stp( 'test333', 'test333_dst', 1000, 31000 );
4     END LOOP;
5* END;
SQL> /
PL/SQL procedure successfully completed.
Elapsed: 00:00:14.86without bulk collect ~ 15 sec.
bulk collect version ~ 22 sec. .... 7 sec longer / 15 sec. = about 45% performance decrease.

DataGrid and Charts with dynamic XML

First of all, forgive me if this has already been answered.
The charting examples you see in the Flex documentation all
use the same familiar ArrayCollection, and binds it to a DataGrid,
Bar Chart, Area Chart, etc. However, all the grids and charts
already know the structure of the data because the mxml contains
field like yField="month" displayName="Month".
What I am trying to do is make everything dynamic. I am
converting an XML structure to an ArrayCollection and making it the
dataProvider, but all I end up with is the column headers. The
actual data doesn't populate the rows of the DataGrid.
Beyond that. I want to take that same ArrayCollection I
created from dynamic XML and use it as the dataProvider for any of
the charts included with Flex Charting. Basically, a way to
visualize the same data in any of the Flex charting components via
a drop down.
Has anybody got this to work?

Without actually seeing the file, I would say check your
content-type and make sure it is 'text/xml'.
You can see examples of setting the content type here:
http://labs.adobe.com/technologies/spry/samples/utils/query2xml.html
You can sometimes tell just by viewing the dynamic XML in the
browser. If it shows as a XML tree, all is well. If it is a big
blob of text, it's probably content-type...
Let us know...
Don

HELP Filtering and IReport with Dynamic Actions

Hi all,
Now that I've upgraded to 4.0, I'm trying to make more use of Dynamic Actions. I followed the example at: http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html and it works fine. The thing is that it is based on a select list which kind of takes away from the effect. What I want is to have an interactive report which is filtered by the value in a text box. I want to use a dynamic action that when a user types a search string, the IR is filtered down based on each character typed. I used the "Change" Event on the text box and the Refresh action on the report region for the IR, but it only refreshes when I "Enter" (submit). Any ideas on how I can get an AJAX-like action using dynamic actions?
Thanks!!!

Hi,
See this post
APEX 3.2 Refresh interective report
It works also for Apex 4.
You can call javascript that set your item session state and refresh IR like in that post
Regards,
Jari

Policy-based Tunnel Selection and PBTS with Dynamic Tunnel Selection option

Unfortunately I can't test this feature on GSR 12k platform.
RP/0/0/CPU0:ios(config)#show config failed
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
interface tunnel-te1
policy-class 1
!!% The requested operation is not supported: Feature not supported on this platform
end
What is the difference between Dynamic Tunnel Selection and ordinary PBTS? It would be nice to see some real-world example.

PBTS with DTS is supported only on the Cisco XR 12000 Series Router... you should rather test it on 12K platform.

New and need help - drag and drop with dynamic text

So I'm doing this project and as an animator I'm not familiar with the whole action script side of flash
Okay so far I've managed to create the whole Drag and Drop feature and it works well, the thing is I want to make it so when you drag in object in the correct spot and new text appears, and I need like six different object with the dynamic text. but I have no idea how to integrated it in my code or where I should start!
So i based myself on some tutorial so theres some code in there that had dynamic text, but not exactly what i wanted
Your help would be much appreciated!
This is my code:
var counter:Number = 0;
var startX:Number;
var startY:Number;
six_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
six_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
five_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
five_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
four_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
four_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
three_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
three_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
two_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
two_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
one_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
one_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void {
    event.target.startDrag(true);
reply_txt.text = "";
event.target.parent.addChild(event.target);
startX = event.target.x;
startY = event.target.y;
function dropIt(event:MouseEvent):void {
    event.target.stopDrag();
var myTargetName:String = "target" + event.target.name;
var myTarget:DisplayObject = getChildByName(myTargetName);
if (event.target.dropTarget != null && event.target.dropTarget.parent == myTarget){
    reply_txt.text = "Good Job!";
event.target.removeEventListener(MouseEvent.MOUSE_DOWN, pickUp);
event.target.removeEventListener(MouseEvent.MOUSE_UP, dropIt);
event.target.buttonMode = false;
event.target.x = myTarget.x;
event.target.y = myTarget.y;
} else {
reply_txt.text = "Try Again!";
event.target.x = startX;
event.target.y = startY;
    if(counter == 6){
        reply_txt.text = "Congrats, you're finished!";
six_mc.buttonMode = true;
five_mc.buttonMode = true;
four_mc.buttonMode = true;
three_mc.buttonMode = true;
two_mc.buttonMode = true;
one_mc.buttonMode = true;

where you have
xxx.text = ....
is where you're assigning text.

13 in macbook pro (early to mid 2011) : after the update, computer freezes with spinning wheel every 30 seconds first with safari and now with all the applications. I don't have any programs installed and still had good enough memory on the RAM.

After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?

Try a smc reset:
http://support.apple.com/kb/HT3964

Better way to take Comet requests and respond with dynamic HTML?

Hello folks,
When my servlet writes back inline plaintext/XML in response to Comet requests, it only takes 10-20ms.
When I have it use RequestDispatcher to return a processed JSP page, it never takes less than a full second.
(I am on localhost with Tomcat 6.20 using the connector org.apache.coyote.http11.Http11NioProtocol)
Now I am a servlets newb, but I thought JSP's are essentially servlets. So there should be a way to run my Comet servlet and then have it call my JSP in serial and only double the processing time.
Is there a faster way than RequestDispatcher to process a JSP page and send it to the client from my servlet?
Thanks.
moeshroom

If you understand HTML and CSS well enough to just write it in Notepad, you are light years beyond most beginners here. Understanding the code is usually the steepest curve of all. Think of DW as a really advanced Notepad with color-coded editing and a visual preview of the code. With that I would recommend doing your coding in Dreamweaver and use Fireworks/Photoshop to optimize your graphics for the web and export those pieces, but not code (HTML or CSS).
If you feel the curve is too steep at first and your job needs to be finished, stick with what you know.

Safari and twitter with 2 accounts?

Hello All
Me and brother live in the same house and use the same Desktop in our computer room.We are having a problem having both of our twitter page open at the same time. For example, when I go on first to tweet, he is not able to log in to his account and tweet unless i have logged out. Is there anyway we both can stay logged in on one computer (MAC, Safari 4.0.1) without the othe one being logged out?
Thanks
why_atl

Hi
You can also use Tweetie - select the Free version w support ads. Much better way to use Twitter.
Once installed, go to Tweetie preferences and enter the various Twitter accounts. Switching back and forth is easy. Help Menu provides details about using this app. Once you get the hang of it you'll find it easier than using the web page.

Safari and troubles with wmv files.

I'm using Safari, Quick Time Pro. I've installed Flip4Mac. When opening a file other than wmv Quicktime launches and it works fine. However when opening a wmv file it doesn't open Quicktime or Flip4Mac it open's I-Tunes. I did reset my mime-settings but it didn't work. I-Tunes still opens.
When using Opera it works fine. I can see that the Flip4Mac plugin is correctly installed. Opera also showed me that my standardapplication to open a wmv-file I-Tunes is. The latter is not mentioned to be. Probably I did something wrong, but I can't correct this.
Recently I had VLC installed and I tried to install Windows Media Player for Mac.
Should I reinstall Quick Time and I-Tunes??
Can somebody help me Safari play wmv files correctly?
Thanks

It's simpler to just reinstall the OS, followed by running Software Update. Reinstalling shouldn't take too long and only replaces the system components and the basic Apple apps, leaving all settings and other files alone.

Safari and Quictime with dynamic innerHTML

Similar Messages

Maybe you are looking for