Safari Beta 3 Application Error when Behind Proxy (tech. details)

Whenever attempting to authenticate behind a proxy, the following message is displayed:
Safari.exe - Application Error
The instruction at "0x6180af81" referenced memory at "0x00000004". The memory could not be "read".
And the following error is logged in the Event Viewer:
Faulting application Safari.exe, version 3.522.11.3, faulting module CFNetwork.dll, version 1.185.6.0, fault address 0x0000af81.
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
I hope a fix or workaround can be found for this error.
Windows XP Pro and Windows 2003 Pro

Update 2: this can be fixed by logging on as another user (User2) and deleting the profile of the user (User1) for whom Safari won't launch.
When User1 logs on again, a new profile is created; Safari launches and runs properly under the new profile.
At the time I noticed the problem, only User1 had logged on. As a guess, I logged on remotely as User2 - Safari launched and ran properly. That suggested that something about User1's original profile was the cause.

Similar Messages

Safari extensions are removed when behind proxy

Since 10.7.4 (I'm guessing) my Safari extensions are removed whenever I login at my office location.
I recive an error stating:
"Safari can't use extension XYZ because the extension is no longer Valid"....
The extension is then removed. Back home I can reinstall and use as normal.
As I mentioned this is a relative new "feature"
My company uses proxy servers, to manage Internet access.
My Computer is not managed by IT, they have no permissions or control over it.
This "feature" only occures when I'm in the office.
All Extensions are removed!

I have the same issue. I use the Cloak VPN when using free hotel wifi. When I connected yesterday, Safari dumped a bunch of my extensions - gone. I reinstalled some of the key ones and they worked fine. The wifi at his hotel is pay-per-day and when I signed up again this morning and used Cloak, Safari dumped the remaining extensions it did not trash yesterday, plus the two that I reinstalled.
Using Safari 5.1.6 on Lion 10.7.4.

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

I bought PSE 12 yesterday at it does not work !!! I get an application error when i attempt to view any photo

I downloaded PSE 12 yesterday and it does not work. i get an application error when I attempt to view any photo

Are using Apple's camera connection kit with the SD reader that came with the kit, or are you using a third-party kit ? Also what type of card are you using : SD, SDHC, SDXC ?
The message doesn't relate to the battery level of the iPad. Only a relatively small amount of power is supplied to the iPad's dock (it used to be higher), so a lot of other card readers can't be used with the kit because they require more power in order to operate.

Application Errors when running iTunes in Windows 7

I am getting the following Errors in Windows when running iTunes 9. Seems to only occur when I want to view anything in the iTunes store or when listening to any music in my library that was purchased from the store.
- I have removed and reinstalled the product.
- I have been successful in replicating this issue on 2 other Windows 7 and Vista machines.
- I am running the Windows 7 Pro RTM 32bit (not the RC or Beta) and Vista Business SP2. All 3 machines worked fine before the upgrade to iTunes 9.
Log Name: Application
Source: Application Error
Date: 9/16/2009 8:41:38 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: XXXXXXXXXXXXX
Description:
Faulting application name: iTunes.exe, version: 9.0.0.70, time stamp: 0x4aa72598
Faulting module name: iTunes.dll, version: 9.0.0.70, time stamp: 0x4aa7257d
Exception code: 0xc0000005
Fault offset: 0x0083d68a
Faulting process id: 0x1028
Faulting application start time: 0x01ca36caf8f662ba
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:38.000000000Z" />
<EventRecordID>2098</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>1028</Data>
<Data>01ca36caf8f662ba</Data>
<Data>C:\Program Files\iTunes\iTunes.exe</Data>
<Data>C:\Program Files\iTunes\iTunes.dll</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 9/16/2009 8:41:40 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: DTKB
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.0.0.70
P3: 4aa72598
P4: iTunes.dll
P5: 9.0.0.70
P6: 4aa7257d
P7: c0000005
P8: 0083d68a
P9:
P10:
Attached files:
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5
Analysis symbol:
Rechecking for solution: 0
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Report Status: 1
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:40.000000000Z" />
<EventRecordID>2099</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml</Data>
<Data>C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5</Data>
<Data>
</Data>
<Data>0</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
<Data>1</Data>
</EventData>
</Event>
--------------------------------------------------------------

Hummmmmm,
I had similar problem today with a laptop with Itunes / Vista
The issue occured when it was connected to the internet. Error message is related to Itunes.dll in the event viewer, and Itunes crashed.
I fixed it by checking the internet options / connection. Just make sure to have unchuck all proxy related option if you are directly connected to the internet.
Tell me if it fixed the issue.
Itunes crashed because it tried to use a proxy setting that was configured but not set to any adress (there was a blank line).

Handling Application Error in Provider Proxy

Hi
My Asynchronous scenario is as following -->
File --> Sndr File Adapter --> PI --> Rec XI Adapter --> Provider Proxy
In this I am using Fault Message Types to handle any application error like u201CEmployee Number does not existu201D or u201CEmployee Number not providedu201D.
Now when this error will happen I will see checked flag in PI --> SXMB_MONI but I can view these errors in R3 --> SXMB_MONI. I would like to send the Mail of these errors to support group when this happened or would like to create file with these error at some location.
Do I need to use BPM in order to achieve this?
Now what is the best approach to do this:
u2022 Should I ask ABAP programmer to generate the mail with these error.
u2022 Can I associate these errors with Alert Management? If yes, then how.
Pls. let me know if you have handled the Application errors in your scenario (Async Inbound Proxy) using some other method .
Regards
Lalit

you can trigger alert from ABAP program using FM "SALRT_CREATE_API" for these errors

Java applet error when using proxy

I'm new with my project. I came in towards the end of R2.0 development and inherited an ongoing issue wherein the java applet throws a login exception error when proxy is used to connect. There's no issue when we do not use a proxy.
Per my knowledge, R2.0 involves an upgrade from an older weblogic v(8.1?) to 10.3. We did not have this problem with the old version.
Based on the java logs, the error below appears after the "set-cookie" step, which i noticed creates a new JSESSIONID
java.io.IOException: Server returned HTTP response code: 400 for URL: .....
+....+
+....+
+....+
Login Exception. Please see your System Administrator.
I have already checked our proxy configurations and they do not have anything whitelisted (which would somehow explain why the old version worked, although nothing in the IP changed which should prevent the new app from working today) nor blacklisted (which would prevent the application from working today).
I am suspecting it's from the cookie, or from the upgrade. Unfortunately, I don't have access to the code because it's being developed by a third-party vendor.
Can someone suggest what to check to resolve this issue?
In case the information I've provided is insufficient, please let me know what else is needed that will help shed some light on this matter.

wrong forum. your question has nothing to do with WebLogic JDBC

Application Error when running JWS

Why when I run my application using JWS (the whole system is in a server and it's dowloaded by JWS and installed) I get this:
Application Error (a window with this title)
Security Exception
java.net.MalformedURLException: unknown protocol: socket
In [Details] this text comes:
Ignored exception: java.net.MalformedURLException: unknown protocol: socket
java.net.SocketException: Can't connect to SOCKS proxy:Connection timed out: connect
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at br.com.kooky.sikget.lib.FTPConnection.connect(FTPConnection.java:132)
     at br.com.kooky.sikget.ui.EDIUI.isFTPConnected(EDIUI.java:140)
     at br.com.kooky.sikget.ui.EDIUI.setDownloadEDI(EDIUI.java:192)
     at br.com.kooky.sikget.ui.EDIUI.btnChecarArquivosActionPerformed(EDIUI.java:798)
     at br.com.kooky.sikget.ui.EDIUI.access$1600(EDIUI.java:43)
     at br.com.kooky.sikget.ui.EDIUI$6.actionPerformed(EDIUI.java:449)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)Just to mention:
When I run the same application using the .jar file everything works as expected, no problem at all.

I Found the problem.
I increased the heap size of the JVm and everything is fine.
-Nawaz

Loyalty application error when creating records.

I am new in Siebel world and we have just installed Siebel loyalty and the Siebel Customer eLoyalty Portal on a sandbox to learn the product features.
The database has no data yet so I would like to create records.
So I start Siebel Loyalty 8.2.1 client, connect to the server, go to Loyalty Program Administration and click new to create a new program. I put a entry for the Name field and I have nothing to select from the Program owner pick channel window because I did not create a partner yet. So I start the Siebel Partner manager ENU application 8.2.1, connect to the server. I go in the partner tab and try to create a new partner entering a partner name.
Then I get this error when I press enter:
An error has occurred writing to a record.
Please continue or ask your systems administrator to check your application configuration if the problem persists. (SQL-DBC-00111) ORA-01400 cannot insert NULL into ("SIEBEL"."S_ACCNT_POSTN"."POSITION_ID")
I have Siebel admiinistrator access.
What I am missing here to be able to enter data. The only field mandatory is the Partner name...
Thank you for your help

You probably want to create an account, link a partner to the account and then create the program.
- Hashim

Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Error when executing proxy in sproxy

i am getting some message when i am executing proxy in sproxy test.RUNTIME 239( SERIALISABLE) 237(EXECUTE)6710(DESERIALISABLE)
can any one tell me what is this ..why i am getting this error . when i am doing sales order creation by calling bapi and sending the values to bapi_salesordercreateformdat1.
Edited by: Moderator on Jun 9, 2011 4:47 PM - short text added

i am getting some message when i am executing proxy in sproxy test.RUNTIME 239( SERIALISABLE) 237(EXECUTE)6710(DESERIALISABLE)
can any one tell me what is this ..why i am getting this error . when i am doing sales order creation by calling bapi and sending the values to bapi_salesordercreateformdat1.
Edited by: Moderator on Jun 9, 2011 4:47 PM - short text added

Application didnt start just says application error when starting...

hi guys i have an application made wiht netbeans, in netbeans it works well with the virtual cell phone, but when i install the application on a sonyericsson w810i it just says that there is an error :S, i just add some screens before making a little more complex the application worked well in the cell phone, is there a way to know what is happening in netbeans i just make a trace but in the cell phone how can i know wich is the problem?

i didn't really understand:
you can install the application and when you launch it, it freezes or you cannot install the
application?

Application error when calling CallStaticVoidMethod

Dear all,
I'm calling a C-written program from java. The C-routine opens a usb dongle and gets data in a callback function. Each time when I call a CallStaticVoidMethod in order to return the data to my java counterpart, I get an Application Error which says: The instruction at "0x6d701845" referenced memory at "0x00000090". The memory could not be read. It looks like I'm calling the wrong method, but I can't get around this problem. I don't get a stacktrace and I don't get a java callback method called.
Any help is appreciated. See below for the code.
Regards,
Jeroen.
<c-code>
// Need global access to jclass and jmethod...
typedef struct
Bool connect;
int dongleId;
jclass WIN32_class;
jmethodID WIN32_method;
jmethodID WIN32_methodHw;
JNIEnv* WIN32_jenv;
int type;
} TState;
TState state;
JNIEXPORT jint JNICALL Java_com_philips_aurora_tools_nal_1interface_sniffer_StkUsbJni_connect
(JNIEnv * env, jobject obj, jint dongleId)
state.WIN32_jenv = env;
state.WIN32_class = (*env)->GetObjectClass(env, obj);
state.WIN32_method = (*env)->GetStaticMethodID(env, state.WIN32_class, "callback", "([B)V");
state.dongleId = dongleId;
errCode = (usbConnect)(dongleId,
(LPARAM) NULL /*??*/, // Don't use windows handles
(void*) receiveCallback,
(void*) handleNotifyCallback,
addr,
0x1 /*?*/);
static void receiveCallback(UCHAR dev, PUCHAR pMsg)
jbyteArray data = NULL;
int i, msgLength = 0;
data = (*state.WIN32_jenv)->NewByteArray(state.WIN32_jenv, msgLength);
(*state.WIN32_jenv)->SetByteArrayRegion(state.WIN32_jenv, data, 0, msgLength, (jbyte *)pMsg);
(*state.WIN32_jenv)->CallStaticVoidMethod(state.WIN32_jenv, state.WIN32_class, state.WIN32_method, data);
// BOOM!
(*state.WIN32_jenv)->ReleaseByteArrayElements(state.WIN32_jenv, data, (jbyte *)pMsg, 0);
(usbFree)(state.dongleId, pMsg);
</c-code>
<java-code>
public final class StkUsbJni implements StkUsbInterface {
     public native int connect(int dongleId);
     public native int disconnect();
     static void callback(byte[] aMessage) {
          StkCallBack.mwToolingMsg(aMessage);
</java-code>

Holding on to JNI info actually works very well like this.The fact that you have gotten it to work sometimes doesn't mean it is correct, it just means you were lucky.
stack is updated (corrupted) when I'm running in java.Which of course means that your C code is wrong.

Itunes application error when attempting to open for first time. HELP

Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium

RIM Application error when syncing info

Using a 9800 Torch and latest Desktop Software OS 6 to sync Lotus Notes Organizer info (non enterprise). Device connects, goes through contact info ok and then the following message pop's when the calendar tries to sync.
Synchronize: Rim.Desktop.exe - Application Error
X The exception unknown software exception (0x0000417) occurred in the application at location 0x7858c955
The the software closes.
Tried reinstalling the desktop software - same problem?
Any thoughts/ideas would be appreciated - thx

Hey jucipriano,
Welcome to the BlackBerry Support Community Forums.
Try resetting the configuration sync settings in BlackBerry Desktop Software which is under Synchronize option. Once completed, re-setup the sync then test.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Safari Beta 3 Application Error when Behind Proxy (tech. details)

Similar Messages

Maybe you are looking for