Safari cuts connection when using bank indentification

When I'm using iPhone without wifi this works fine but both iPad and iPhone cut connection in Safari when using wifi. Is the problem in Safari or my wifi router?

Seems to work fine with Puffin Free. Has something changed in Safari lately?

Similar Messages

  • OS 10.4.6. has broken dialup connectivity when using fast user switching

    I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
    For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
    Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
    I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
    Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
    Mini-Mac 1.42GHz 80GB BT/AE   Mac OS X (10.4.6)  

    I have not tried replicating this but might be able to provide some additional information.
    We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
    Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
    /Volumes/Fred
    If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
    /Volumes/Fred
    /Volumes/Fred 1
    Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
    /Volumes/Shared
    With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

  • Does Mackie Control work with Final Cut 7 when using USB MIDI?

    I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
    The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
    Any thoughts?

    Does Mackie Control work with Final Cut 7 when using USB MIDI?
    No one will know until FCP 7 is released.
    -DH

  • LabView 6.1 crashes now and then when I try to get rid of an accidential starting connection when using the wiring tool.

    Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
    How can I stop LabView from crashing in that case?
    Thanks for anybodies help!

    Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
    Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
    I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
    Thanks for your help!

  • Audio cuts out when using Interfaces

    Just recently bought my first iMac, with plans to use it for multi-track recording. The audio is cutting out when using FireWire or USB interfaces to record and/or play audio. For instance, with an Edirol FA-66, even iTunes experiences brief periodic audio loss (every 20 seconds or so) when playing through the device. PreSonus Firebox works a bit better, with a 1 to 3 second loss every 40 seconds or so... this happens when using OSX as well as XP... the operating system doesn't seem to influence the problem. To be certain it wasn't a FireWire issue, I tested it with an M-Audio USB interface and had the same audio loss.
    Talking with tech support, the first guy just blamed everything on the 3rd party devices. That drove me CRAZY. Finally he got a specialist on the phone, who blamed it on the intel chip.
    Right now I'm just living with it... trying to record songs in smaller pieces. I wait for the audio to drop, then as soon as it comes back I hit record. I've got about 40 seconds (using the Firebox) which is enough to lay down a verse or chorus.
    I'm just hoping, HOPING that someone at Apple is looking into these things.

    Hello,
    This may be a stretch but your mention of " hard drive hanging" prompted me to suggest your problem may involve low data transfer rates. (I mean, the hard drive may have too slow.)
    When, for example, Final Cut Express or Pro are being used, they require high data transfer rates to avoid frame dropping. Apple's article on the HD requirements for those apps is here:
    <http://docs.info.apple.com/article.html?artnum=58636>
    eMac/ 1 Ghz / combo, 120 GB Mercury FiWi extnl   Mac OS X (10.3.9)  

  • Tecra 8100 system error when using Bank B

    Hi,
    I get system errors and Bluscreens when using Bank B. When using Module1 in Bank A, everything is ok. When putting same module as in Bank A in Bank B (Bank A+B) i get the errors.
    So, what could it be? Do I Have to "activate" the use of BANK B anywhere or does it looks like its defekt?
    Thanks for any help

    Hello
    Well, you have to replace the motherboard if the memory Bank has a fault. In this case the only right way it to contact the service partner. They could give you some detailed informations.
    Bye

  • Safari quits unexpectedly when using flashplayer 10.6

    safari quits unexpectedly when using flashplayer 10.6

    May not be just Flash that's the issue. Post a crash report.
    If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
    Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

  • Beginning of audio cut off when using digital optical out

    Hi all,
    This is my first post here since switching to Mac earlier this year.
    I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out.  This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like).   I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906).  Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
    The problem does NOT happen when using the built-in speakers.  I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing.  If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped.   I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something).  I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
    I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it.  It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead).  However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
    I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago.  It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support.  So here I am! 
    Does anyone else have this problem with optical out, and how can I resolve this?  Any help would be gratefully appreciated.
    Thank you.

    Hello kcore66,
    Would it be possible for you to upload one of the files in
    question so that I can take a look. In Captivate 1.01 there is an
    intermittent problem where sometimes the audio is either cut off or
    just doesn't play when you publish / preview. To get around this
    simply moving the audio object back and forth along the timeline
    and then positioning it back in it's original position works 9
    times out of 10.
    HTH
    Regards,
    Mark

  • Often lose wireless connection when using HDTV as monitor

    I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
    I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
    The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
    I’d appreciate any solutions the Apple user community has to offer.

    I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

  • Losing smart camera connection when using web server on NI1762 smart camera

    Hi
    I am using 2 smart cameras ( old NI1762 and the new NI1772) with Vision builder 2011 . 
    I am trying to find a way to retrieve data and image to a Visual Basic 6 application. i could not find an elegant way to do it , so instead , i am sending TCP command to the smart camera as an input and the smart camera send me back a TCP command a as an output. by this way i could communicate with the smart camera . For transferring images I could not use the TCP step , so I turned on the smart camera web server to get the image by a browser Object . But the problem is that everything is going well with the TCP, but when I turned on the web server and try to communicate with it, sometimes I loose the connection with the smart camera. That is happened with the 1762 smart camera. But when I use the NI1772 it rarely happed.
    Please help me. is there any other elegant way to communicate with the smart camera , and if a TCP and web server is a solution , Why the NI1762 web server is not stable ? Why i am losing the connection when browsing to the inspection page???
    Thanx

    Previous versions of Vision Builder had a COM library that you could use from Visual Basic 6 or other environments and talk over the network to a Smart Camera running Vision Builder AI and control its execution just how you are requesting. In more recent versions, this has been replaced by a native .NET and LabVIEW-native API that is much more fully featured. Unfortunately, I do not think the older COM mechanism is still available/supported (but I certainly could be wrong...).
    However, one avenue you may wish to persue would be to call into the .NET interface from Visual Basic 6. Microsoft designed .NET to allow COM interoperibility in both directions (.NET can call into COM libraries and COM libraries can call into .NET). Take a look at the following document from Microsoft:
    http://msdn.microsoft.com/en-us/library/zsfww439(v​=vs.85).aspx
    You could then look at any of the .NET (C#) examples to get an idea of the API:
    C:\Program Files (x86)\National Instruments\Vision Builder AI 2011\API Examples\dotNET Examples
    Eric

  • Does it charge you for GPS connection when using t...

    I have an N73, my tomtom software and bluetooth gps reciever are on the way.
    Will it charge me for using tomtom by the minuete when usung 02 pay and go or not?
    The prices for using the internet on my phone are rediculus so hopefullly not.
    I assume when using it for a journey it wont be costing me by the minuete to have my tomotm telling me directions via my phone?
    Could anyone answer this question please
    Thanks

    No it won't cost you anything while you are using TomTom. BUT if you sign up for Traffic which warns you of holdups, accidents etc it will cost about £40 a year payable to TT and any fees payable to 02 for downloading data every quarter of an hour or so. The GPS connection is via Bluetooth so it costs the same as running an earpiece ie nowt! You may well be able to run them at the same time.

  • IM names cut off when using larger font

    I switched my IM windows to use a 12pt font instead of the default 10pt font. Now it cuts off the bottom half of all that names. But hey, at least I'm still wasting 50% of my screen real estate on whitespace and bubbles! 

    read about it here
    Characters become cut off when font size is set larger than 8 on the BlackBerry 10 smartphone   
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

    Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

    I have a:
    new MBPr 15" late 2013 with dedicated graphics card
    new airport extreme base station
    3rd generation apple tv
    iPhone 5s
    200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
    All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
    I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
    Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
    Strange when you think how Air Video works:
    Video file lives on MBP
    iPhone connects to laptop
    Video plays on iPhone and is sent to Apple TV via Air Mirroring
    Rather than:
    Video played on laptop
    Video sent to Apple TV
    Seems bizzare that my iPhone can handle better streaming than my pro laptop.

  • Safari keeps freezing when using yahoo mail.

    Safari keeps freezing while using Yahoo mail. Have to close out or reset safari to regain access. Anyone else ever have this problem?

    Why not use Mac Mail instead of Yahoo's web based mail and having to access it via Safari and deal with incompatibility issues?
    Open Mac Mail.
    From the menu bar top of your screen click Mail / Preferences then select the Accounts tab then the Account Information tab.
    Click +  (plus) under  the Accounts  panel on the left.
    Type in your name, Yahoo email address and Yahoo password then click Create.
    It's that easy.
    To view incoming mail or start a new mail message just click the Mail icon in your Dock. If the Mail icon isn't in the Dock, go to your Applications folder, launch Mail. Then click and hold the Mail icon in the Dock, click Option / Keep In Dock.

  • Lost connection when using telephone

    i lose my internet connection when i make or receive a phone call...the comcast guy told me to try and change the channel my airport runs on...how do i do this if it makes any sense to anyone else
    thanks eric

    Duane,
    thank you i am no longer having problems after about a year everything is working properly.....the channel was set to automatic and i put it on 11
    thanks again,
    eric

Maybe you are looking for