Safari won't connect - redirects to 404 Not Found
Good morning! I have a new MacBook Pro, and am a long-time Mac user. Yesterday I spent 4 hours on the phone with an Apple tech, and we were not able to resolve this issue so I hope somebody out there is smarter than a Genius.
When I open Safari, it instantly redirects to a 404 Not Found page, specifically "http://www.microsoft.com/exchange/services/default.mspx". If I type in "http://www.google.com", it redirects to the same 404 Not Found page. If I click on any bookmark, I'm redirected the same. Oddly, the only site I am able to open by typing or using bookmark is Wells Fargo Bank. But I cannot navigate anywhere from there.
The tech had me do everything - reset Safari, empty all caches, delete and reinstall Safari from original disks, repair using disk utility, even reinstalled OSX from original install disks.
Firefox works just fine, and Safari on my husband's Mac connects with our Airport as well, so it's not an Internet connection problem. Please help if you can! Thank you.
Thank you both for your kind suggestions. I read everything regarding DNS, and that does not seem to be the source of the problem. I'm able to get online -- I can get anywhere through Firefox, and Safari will take me to wellsfargo.com but nowhere else. All other web addresses are redirected to the 404 Not Found (Microsoft) page. Think the bankers have taken over my MacBook Pro? Or Microsoft ....
Still hoping for a solution, because it's good to have a backup browser to Firefox.
Similar Messages
-
Firefox won't open...keep getting "404 not found" WHY? HELP
firefox won't open...keep getting "404 not found" WHY? HELP
The 404 message usually indicates a web page can not be found. If you are seeing that message in Firefox then Firefox is up and running but either having problems connecting to the web or not finding a specific target page. Sometimes the address may be wrong, sometimes the site may not be available.
Have you written this message whilst using Firefox on another computer ?
See also the article
* [[error loading websites]] <-- clickable link --
On the problem computer, if it is a Windows machine it will probably have Internet Explorer, does that work ok ?
Is it one particular website you are having a problem with, if so what is that site, and what is the web address as written in the location bar. If it is many pages give at least two examples please.
Copy and paste the location bar contents into your post
* Keyboard key '''Ctrl + L''' (press the Control key hold it down than press the L key) that will highlight the location bar content, do that while trying to use the web page
* '''Ctrl + C''' copies the info to the 'clipboard'
* change to the message you are writing '''Ctrl + V''' pastes/inserts content at mouse cursor in your message -
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Safari won't connect to the internet?
Hi all
Safari won't connect to the internet. My Itunes store works fine, and i can update my software without any problems.
Anyone have a sollution?
Thanks!I open Safari => Top sites open ==> i click on a site ==> Safari says " Safari can't open the page "http://www.youtube.com/" because Safari can't connect to the server "www.youtube.com".
This message is not a popup, its a text in the Safari page like "no internet" or something.
Itunes store works fine :s
Thanks -
Safari won't connect without signing on to AOL
I’m having a problem with Safari not working. I have had my imac G5 for a couple of weeks now and It’s been working great until yesterday. I use safari and AOL with a router. Safari is my default browser. Everything was working fine except now Safari won’t connect unless I’m logged into AOL. If I’m in AOL Safari works fine only slower than normal. If I log out of AOL, Safari quits working. Anyone have any suggestions?
Not sure what happened. Everything else seems to be working fine.
Thanks,
randyJust as suddenly as Safari stopped working, it started again. The only thing I did differently was sign in to the main administrator and started Safari from there. Maybe I needed to do that after I repaired permissions and reset the modem. anyhow, it's working ... for now.
Thanks
Randy -
Safari won't connect to internet; Firefox will ???
Safari won't connect to internet; Firefox will???
Wierdest thing. For some reason Safari won't browse or connect to the internet anymore. When I open Safari the default address is in URL bar, but with highlighted (words only) in blue and it just sits there all day. I can't connect to any web site on the net.
However, if I open Firefox all is fine and my Mail is all fine also.
I've repaired permissions a few times and even trashed the preferences for Safari, restarted computer etc, but it still refuses to actually display anything. I get a blank white page, then after about 2 minutes it simply says "Safari can't open the page. Because the server stopped responding".
As I said, no problem with Firefox.
Any ideas.I thank you for getting me into the right ball-park otherwise I would not have spotted it.
You're welcome. Glad I could help.
Please consider marking this post "helpful" next to my name ((you'll need to log-on to the forum).
Aloha from Big Island. -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
How do I use a different browser then safari? I have several sites safari won't connect to.
How do I use a different browser then safari? I have several sites safari won't connect to.
I can connect to Bank of America's site just fine. Can you connect to the site or is it that you can't perform certain functions on the website? Do you know that there is a Bank of America App available?
Bank of America for iPad for iPad on the iTunes App Store
Bank of America Mobile Banking for iPad®
If you download another web browser for the iPad, you use it just like you use Safari. Tap on the app icon to launch the browser and then use it like any other web browser. -
Safari won't connect to certain webpages
Welp,
on my G5, in the past few weeks, Safari won't connect with only certain internet pages, like ebay, qvc, and my school webpage. Called Apple help and the man said there was a third party thingie in the way. Dumped preferences, then re-installed the harddrive (with archives) and still the same problem. Type the address, wait more than a minute, then the Safari cannot connect page comes up. I've sent about nine of these to report bugs but have heard nothing back. I'm computer illiterate and will appreciate any suggestions.
Thanks
G5 Mac OS X (10.4.6)First off, this is the eMac group. Your system info says "G5". So are you in the correct group (all eMacs are G4 machines).
Have you tried those same pages with other browsers? FireFox and Camino are two that are popular and free downloads. So first thing to do is try those out as well and see how the pages come up. If they come up in Firefox or Camino, then I would agree that your problem is with Safari.
If, however, they don't come up there, then your problem is elsewhere. Likely places to check are Firewall setting in software or in any router you might be using. I have found certain "secure" or other log in type sites sometimes have troubles with certain Firewall settings on my DSL router. You may have the same issue and are looking in the wrong place for your solution.
Patrick -
HTTP Connection to R/3 System error- HTTP/1.0 404 Not found
Hi,
I am using a HTTP connection to XI to extract data from R3 to XI. The HTTP connection I have created in R3 are getting an error - "HTTP/1.0 404 Not found" while testing the connection.
Porperty maintained in the connection:
Terget host = <XI server address>
Service No = 8000
Path Prefix = /sap/xi/engine/adapter_plain?
The exchange profile in XI (PI 7.0) system is as follows:
com.sap.aii.connect.integrationserver.r3.httpport = 8000
HTTP port is set as 8000 in SMICM services.
The same type of connection is working fine in the lower PI and R3 environment but failing on productive system.
Thanks for your help.
RegardsHi,
Well... you are trying to configure a HTTP RFC destination in SM59, aren't you?
Dont worry about that. It is just a warning. Click on return or space bar after typing path prefix.
Then save and test the connection.
Carlos -
Connect to B1i server failed - HTTP/1.1 404 not found
Hi All,
I currently have B1 8.8 PL14 installed and in the process of installing B1i when I get to Step 3/5: Configure B1i Parameters and select Test Connection I get the error message 'Connect to B1i server failed - HTTP/1.1 404 not found'. I have followed. I have undertaken the installation as per the recorded session by Benno Eberte and regrettably I cannot set a successful connection.
Can anyone assist?
Best regards
EarlHello,
personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-8012) Company version mismatch
{b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
Hope it helps
Kind Regards -
My safari won't connect to sever but I have wifi connection!?
My safari won't connect to the internet but I have a connection?? How do I fix this
This worked for a few members:
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712 -
404 Not Found redirection while watching videos online
Just today whenever I try to watch any video on firefox or safari via dailymotion it crashes within few minutes (it varies immediately or few minutes) with the message "404 Not Found nginx/1.0.15" and the hyperlink is
[removed by moderator - malware link]
I use a macbook pro which I bought end of April so I tried calling the 90 day apple support for help. They say this is a third party software issue and cant help and I should contact adobe since the issue is with the flash player.
Please help me as I am unable to watch any videos online as it keeps crashing to that 404 error page. The crashing varies sometimes it doesn't happen but most of time times today I am experiencing this annoying crashi to 404 page. I would really appreciate help in getting rid of this error permanently. Should I uninstall all adobe programmes on my mac and reinstall them again? and how do I do that? I dont want to lose my adobe programmes (photoshop etc) its a real problem I am having this error
I am completely relying on you guys to help sort this problem asap....The link you included is a fake site, nothing to do with Adobe, and in all likelihood riddled with viruses.
-
This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It's possible that the webpage is temporarily unavailable. Alternatively, the website might
have changed or removed the webpage.
For more information about HTTP errors, see Help.check this
http://social.msdn.microsoft.com/Forums/en-US/5576aba1-d196-42ce-bd62-ad5ddfa3a8fd/this-error-http-404-not-found-means-that-internet-explorer-was-able-to-connect-to-the-website-but?forum=sharepointgeneralprevious -
why won't google work? whenever i try to go to google it just saya 404 Not Found. Also why won't captcha show up. when i have to type in a captcha to show i'm not a robot the words won't show up
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David
Maybe you are looking for
-
E4X: What happens to the root element?
I'm working with XML using the E4X notation. I'm used to the "old school" XML APIs that use DOM and I'm a bit confused. For example, let's consider the following XML <mx:XML id="myXML" > <top> <sub1 id="uno"> <sub2>hello</sub2> <sub
-
TAB functionality in a custom screen.
Hi, I need to develop a screen where in it contains table controls, different push buttons and Input output fields. One of the button is TAB. This tab button should function as a TAB functionality in the keyboard. Meaning whenever I click on this
-
Add new field as selection parameter in HUMO report
Dear Experts, We have arequirement to add a new selection criteria in a standard report HUMO. We need to add a new filtering field from VEPO table. How can we do this without going for development. Please suggest Regards, Shashidhar
-
Don't understand how to save/export
Hi- I just got my first Mac & although I have used IMovie in the past to make a DVD from photos, I've never used it with video. I wanted to film a short clip and be able to email it to someone. I figured out how to film it but when I go to "share" to
-
Hi Just bought an iPad for my parents. Trying to set a password for mail.app so both of them can open the app, tap their mail, enter password and view their mail. Can't seem to find settings to enable this. Does anyone know if it is possible to do wh