Safe Mode In server 2012

Hi,
I am facing a problem in safe mode. Today I test safe mode option in 2012 server, when i enabled it and restart the server it always opening in safe mode. I disable safe mode and try to hit f8 key again but it is not opening in safe mode.
Why? Because i did not check on safe mode option.
Now my question is- If some how my server is not booting in normal mode due to any software reason or hardware reason and i want to open it in safe mode. How it would be open in safe mode whereas i did not enable safe mode.
If the safe mode can be enable in only normal mode than how we can troubleshoot the problem?
May be my question could be wrong.
Please let me know how it works ......
Thanks
Gopal
Gopal Rawat

Hi,
To enable Safe Mode, please try the following:
1. If you can boot into Windows, please open a privileged command prompt.
2. If not, please boot into recovery mode and run command prompt.
3. In the command prompt, please input
Bcdedit /set {bootmgr} displaybootmenu yes
4. Once completed, please restart your computer, then press F8 to enter setup screen upon startup,
then press F4 or 4 to enter safemode.
References:
How to easily enter safe mode in windows 8? (One-click series)
http://support.microsoft.com/kb/2809468
http://www.vmwareandme.com/2014/01/guide-how-to-boot-windows-8-windows-81.html
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Similar Messages

Error rsItemNotFound when using ReportingService2010 endpoint in SharePoint Mode (SQL Server 2012 & SP2013)

Hi all,
I installed SQL Server 2012 in SharePoint Mode, with SharePoint 2013 on a Windows Server 2012 virtual machine. The issue occurs when I try to use the ListChildren operation of the ReportService2010 endpoint.
It manages to connect to the server, but it refuses to list any children. Here's the code I'm using:
using System;
using System.Net;
internal class Test
public static void Main()
var rs = new ReportingService2010
Credentials = new NetworkCredential("username", "password", "machine")
CatalogItem[] items = null;
// Retrieve a list of all items from the report server database.
try
items = rs.ListChildren("/", true);
catch (Exception e)
Console.WriteLine(e.Message);
When executed, this code throws an exception (which is caught and displayed) : "The item '/' cannot be found. (rsItemNotFound)"
The same code works (i.e. does not throw any exception and the items variable contains some CatalogItem) when used against a SQL Server 2012 configured in native mode.
I'm not sure what I'm doing wrong here, maybe the first parameter shouldn't be "/" but something else?
Thanks for your help
Aotio

+1
I'm getting this error as well. My test software is connecting to two different servers; one is running on SharePoint 2010 and I have no problems using the ReportingService2010 functions on that, but I am getting this same error when trying to connect
to a service on SharePoint 2013.

IE 11 does not open in desktop mode on Server 2012 R2

We've built our first 2012 R2 servers. IE11 will open in metro if it's not set for desktop mode. It will fail in desktop mode. It will however open if you go to an admin command prompt, go to c:\program files\internet explorer and run iexplore.exe. When
trying desktop mode in the event app logs, event ID 102, task category (101) appears with the message "the program iexplore.exe version 11.0.9600.16518 stopped interacting with Windows and was closed". I have tried everything I've found using Google:
reset, use software rendering, etc and nothing helped. Any suggestions?
Ben JohnsonWY

Hi Ben,
Your issue can occur if the IE setting is incorrect, or the temp folder need clear up. If you are not choose Always in Internet Explorer on the desktop, IE may use Metro mode. Also disable enhanced protected mode for a test.
This issue may cause due to some registry problems occurred.
To resolve this issue, follow the below steps:
a. Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
b. Type regsvr32 actxprxy.dll in the Open box, and then click OK.
c. If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
d. Restart the Internet Explorer
If the above given steps also did not help then try to disable the antivirus and firewall and try installing Internet Explorer 11 manually.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Outlook 2013 in a 2012 r2 Terminal Server environment and crashes after initial setup. It will not launch in safe mode

I am running terminal server 2012 R2 (RDS environment) In Windows Domain, 8 users across a LAN on a new server. Outlook 2013 crashes and will not load in safe mode. Outlook allows the initial profile setup and when the configuration is complete, it
crashes and will not launch or launch in safe mode. I have deleted the outlook profile and reconfigured it. The problem continues on all user accounts. The firm is not using Exchange and is using a POP3 account. I have a 13 user Office Volume License
(per device) and 15 terminal server Licenses ( per user)
Problem Event Name :      APPCRASH
Application Name:            Outlook.EXE
Application Timestamp :   52b0b282
Fault Module Name :        OUTLOOK.EXE
Fault Module Version :     15.0.4569.1503
Fault Module Timestamp: 52b0b282
Exception Code:                 C0000005
Exception Offset:                00340b9
OS Version:                      6.3.9600.2.0.0.16.7
Local ID :                         1033
Any help would be much appreciated.

follow this instruction to troubleshoot Outlook crash issue:
http://support.microsoft.com/kb/2652320
Flynn

Windows 2008 Server boot loop and unable to log on in Safe mode

The Situation: I used msconfig to reboot Windows 2008 Server r2 into safe mode. On rebooting, boot progresses ok and the log in screen appears very quickly, then disappears and the machine reboots. I've tried typing the password very quickly and whether
I get it wrong or just can't get enough typed in time, I don't know, but the reboot loop continues. So, i can't log on and can't change safe boot back to normal.
I know Server 2008 uses bcdedit and no longer has a boot.ini, so I don't know if it is still possible manually to amend a boot file so it starts in normal mode again. Can anyone help me to break out of this boot loop without having to resort to anything
major, such as reinstallation?
Just to make clear, I haven't updated the system and the only change made was with msconfig to require safe boot on restarting.
Thanks

from the safemode try this syntax
Syntax: bcdedit /deletevalue {default} safeboot
http://technet.microsoft.com/en-us/library/cc721886(WS.10).aspx
http://www.virmansec.com/blogs/skhairuddin
How on earth is that a good answer? Sorry for the necrosis here of bringing up a post 9 months later, but I just ran in to this issue again. The OP said that he was STUCK IN A BOOT LOOP having placed himself in SAFEMODE already.
How is he supposed to type this in if he can't log in?
What worked for me was to keep striking F8 like a cobra during boot and telling it to use the Last Known Good Configuration option, after the 4th autoreboot, it let me log in and let me switch it back out of the safe mode and back to the normal boot. Yes,
I am aware this is quite lucky and now I don't have to rebuild all my server set up, and that your mileage may vary here, but, keep trying, you might be lucky.

Errors while Changing the Database to Mutli User Mode from Single user mode in SQL Server 2012

Hi,
Good Afternoon :). Need your help in resolving one of the issue with SQL Server 2012.
Today, we kept one of the database in the Single User mode and wanted to bring back to Multi User mode. But we are getting the below error. There are no user sessions connected to this database which are blocking each other. I see multiple
SYSTEM sessions are in blocked state.  The blocking is not cleared even affter restarting the SQL services.
Verified the SQL Server Errorlog and couldnt get much useful information to troubleshoot the issue.
pasted the information from the sys.sysprocesses as well for your kind reference.
Msg 1205, Level 13, State 68, Line 1
Transaction (Process ID 55) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
spid
kpid
blocked
waittype
waittime
dbid
login_time
status
cmd
18
1004
36
0x0005
144
5
4/9/2014 13:13
background
TASK MANAGER
35
1796
36
0x0005
35
5
4/9/2014 13:34
background
TASK MANAGER
36
2464
37
0x0005
363
5
4/9/2014 13:34
background
TASK MANAGER
37
5100
36
0x0005
254
5
4/9/2014 13:04
background
TASK MANAGER

Clearly 36 and 37 are causing deadlock.
see
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
http://www.mssqltips.com/sqlservertip/1036/finding-and-troubleshooting-sql-server-deadlocks/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Logic pro 9 additional content won't install and iMac 27" late 2012 won't start in Safe Mode

Hi,
I have bought Logic Pro 9 and have encountered problems installing the Additional Content pack. I am using late 2012 iMac 27" (with fusion 3TB drive) and OS X Mavericks (10.9.1).
For some reason the Additional Content pack does not install when downloaded from Logic Pro menu and it does not install either when using the .dmg file. I noticed that many users are facing the same problem, but they have resolved the issue installing the Additional Content in Safe Mode. However, my iMac does not boot in Safe Mode (other users are encountering this annoying problem and it remains unresolved by Apple, see https://discussions.apple.com/thread/5485131?start=0&tstart=0).
This is extremely frustating, because I am using my iMac for my work and therefore it is impossible to backup my data reinstall the OS X. Additionally, I am using the computer for my music projects and I am completely stuck, because I cannot use insrument patches that I need.
Does anyone have solution for this?

Install on my Core2Duo 17" MacBook Pro went flawlessly, but install on my 8 Core Mac Pro suffered this problem. Many thanks for the solution Don, it worked for me ;-)
I am trying hard to supress an ironic chuckle though, reading other posts in this thread .... suggesting that people should call Apple Tech Support and expressing incredulity that people weren't doing this as their first option.
Well I can say say that after several calls to Apple Tech Support, amounting to several hours on the phone, and well over an hour on the phone with them today, I was informed that this problem is a known bug, and that Apple are working on a solution. They couldn't tell me what the bug is, what machines are affected, or what else might trigger it, or when a bug release might be due.
Their troubleshooting steps basically involved various reboots, repairing disc permissions, reseting the user home directory via terminal, booting up in recovery mode (but not safe mode as per this solution) trashing various preferences files, and, as a final step, uninstalling and reinstalling from scratch.
Only when all that failed was I told that there is a known bug that Apple are working on.
I came here to see what the community was saying, as the Tech Support guy did say there was likely to be some info on the forums. Lo and behold, a solution is posted and it works.
Why are Apple's Tech Support (in the UK at least) not aware of this?
Oh well, at least I'm up and running on my Mac Pro now.
Thanks again Don,
Cheers,
Nigel

New install ZH77A-G43 with cloned Server 2003 won't boot in Safe mode

Hello,
I just installed a ZH77A-G43 into an existing PC box, new Core i3, new SATA CD and 500G drive, existing tape backup connected to a SCSI card. I cloned the new harddrive into 2 partitions, the first one being a bootable Server 2003. I installed the harddrive on another computer, and the partitions appear to be cloned correctly. When I boot off the new drive in the new hardware computer it gets to the Server 2003 splash screen, and then reboots during processing of acpitabl.dat (this is in Safe mode). I've tried booting from a Server 2003 installation CD, and that also results in a reboot.
I tried removing the SCSI card, and that results in a reboot before the MSI splash screen comes up.
This is the first time I've done a hardware change like this. The MSI instructions were very simple to follow and I was exciding to see the Server 2003 splashscreen after about 30 minutes of hardware installation. But now I'm stuck and request your help.
Regards, Philip

Hello xmad,
Thanks for the suggestions. The CD that wouldn't boot is Server 2003 64 bit--no service pacts. I just tried my VISTA CD and it came up and was ready to start the installation. The hardware is
Seagate 500G harddrive connected to SATA2
LG OEM DVDRW 24X internal connected to SATA1
2 sticks of DDR3 2GB 1333MHz
Quantum DLT-V4 tape backup drive connected to SCSI card
PSU is enclosed in a case labeled ANTEC DESIGN and I can't see any infor unless I take apart the enclosure.
I just removed the SCSI card, and the system reboots immediately after 1 second or so of the MSI splashscreen. With the SCSI card in, it reboots during the Server 2003 splashscreen (during processing of acpitabl.dat).
Should this system be compatible with Server 2003 64bit?
Should I next update the BIOS as you previously suggested?
Update: I currectly have BIOS E7758IMS V1.7

SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode

Hi
I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
which gives an 404 Not found error
I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
What else should I do ?
I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
Please help
Sorin Sandu

Hi Sorin,
SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
Report Builder, please see:
http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
Reference:
SharePoint 2010 – SQL 2012 Reporting Services
SharePoint 2010 - SQL 2012 Reporting Services Part 2
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu

Error updating Portal from SP13/14 to 15 - SAP_JAVASL - Server in Safe Mode

Hi Experts
while updating the Portal 7.0 from mixed state 13/14 to SP15 the JSPM finished (all components marked as deployed) but the server didn`t come up after hours.
Exit JSPM - Relogged into JSPM - Only JSPM was marked as deployed-
So I Deployed again - Kernel was deployed but in Component SAP_JAVASL another error occured:
"cannot update sdm"
action_auto_update
SAP_JAVASL
Server is in SAFE MODE
Actual SDM Heap is 512 MB
J2EE Engine runs in "safe mode"
Developer Tracce of SDM -
SDM Server STOPPED
[Thr 4516] Sat Jul 12 14:58:13 2008
[Thr 4516] JLaunchRequestFunc: receive command:17, argument:0 from pid:1120
[Thr 4516] JLaunchIShutdownInvoke: set shutdown interval (stop:1215867493/end:1215867613/TO:120)
[Thr 4516] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 4516] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 4516] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4516] JLaunchISetState: change state from [Initial (0)] to [Stopping (5)]
[Thr 4296] Sat Jul 12 14:58:14 2008
[Thr 4296] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 4296] JLaunchCloseProgram: good bye (exitcode = 0)
I tried to switch off the "safe Mode" via Visual Admin - but nothing changes (still in safe mode)
Any ideas - helpful answers - please help!!
kind regards
Tom

Tom,
Follow the below steps:
1. Stop manually the JSPM process.
2. Start the Config Tool script file from the /usr/sap/<SID>/<instance name>/j2ee/configtool/ directory.
3. From the menu choose "File" --> "Safe Mode". A dialog box appears.
4. Choose "No" from the "Safe Mode Enabled" drop-down list.
5. Choose "OK".
6. Save the settings and confirm all the messages that are displayed.
7. Restart the J2EE Engine.
Check out this SAP Note for more information:
Note 985496 - JSPM: problem during start/stop engine in SAFE/None mode
Regards,
Karthick

SQL Server 2012 Report Server mode is blank?

Hi, I have configured SharePoint 2013 with SQL Server 2012 on Windows Server 2012
with complete features on the same server.
But when I checked Report Server mode under Report Service Configuration Manager it’s
showing blank means Report Server mode neither in native mode nor in SharePoint integrated mode.
What is the issue?
I want
Report Server mode should be in SharePoint integrated mode.

You need to install the Reporting Services - SharePoint feature from the SQL Server installation media onto the SharePoint server. You then need to start the Service Instances in Manage Services on Server and create a new SSRS Service Application in Manage
Service Applications.
http://msdn.microsoft.com/en-us/library/gg492276.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT1677 Safari & Chrome will load web pages only in Safe Mode; Normal mode receiving error "Cannot connect to Server"

MacBook Pro
OS X Lion 10.7.5
Safari version - 6.0.5
Started several days ago, Safari and Chrome will not load any web pages giving an error message "Cannot find Server". When I shut down and boot Mac in Safe Mode, Safari will then load the we pages.
Can anyone help on the possible cause and resolution?
Note: Apologies for the community selection, it doesn't have many options other than iPod Touch, iPad and iPhone.
Many thanks, in advance.
DoshiNJ

Did some further investigation on the communities website, another discussion/question provided possible cause cause, followed discussion and resolved my own issue. Link below to reference discussion is provided below:
https://discussions.apple.com/message/19946023#19946023
Note: credit to BDAqua and SharkDog, many thanks.
I had Peerguaurdian installed, I removed an entry related to Peerguardian from LaunchDaemons and/or Startup Items and/or PreferencePanes under Library, instructions below:
- Finder > Devices > (Username) > Hard Drive > Library folder
- Go to each of the folders "LaunchDaemons", "StartupItems", and "PreferencePanes", expand each folder using arrow to the left of folders
- look for unusual application titles (in my case it was *peerguardian*)
- dual finger click on line item, menu will appear.
- select "Move to Trash"
- reboot Mac
Hope this helps.

Windows Server 2012/2012R2 NIC Teaming Mode

Hi,
Question 1:
In Windows Server 2012 the following teaming mode was recommended for Hyper-V NIC teams:
Teaming mode: Switch Independent
Load balancing mode: Hyper-V Port
All Adapers Active
In a session at TechEd 2014 it was stated that Dynamic is the new recommendation for Windows Server 2012 R2. However, a Microsoft PFE stated a few weeks ago that he would still recommend Hyper-V Port for Windows Server 2012 R2. What is your opinions around
this?
Question 2:
We have a Hyper-V Failover Cluster which isn`t migrated to 2012 R2 yet, it`s running 2012. In this cluster we use Switch Independent/Hyper-V Port for the team. We also use converged networking, having 2 physical adapters bound to the NIC team, as well as
3 virtual adapters in the management OS for management, CSV and Live Migration. Recently one of the team NICs failed, and this incident also caused the cluster membership on the affected node to go offline even though the other team NIC was
connected. Is this expected behaviour? Would the behaviour be different if 2012 R2 with Dynamic mode was being used?

Hello,
As for question number 1:
For Hyper-V workload it's recommended to use Dynamic with
Switch Independent mode. Why?
This configuration will distribute the load based on the TCP Ports address hash as modified by the Dynamic load balancing algorithm. The Dynamic load balancing algorithm will redistribute flows to optimize team member bandwidth utilization so individual
flow transmissions may move from one active team member to another. The algorithm takes into account the small possibility that redistributing traffic could cause out-of-order delivery of packets so it takes steps to minimize that possibility.
The receive side, however, will look identical to Hyper-V Port distribution. Each Hyper-V switch port’s traffic, whether bound for a virtual NIC in a VM (vmNIC) or a virtual NIC in the host (vNIC), will see all its inbound traffic arriving on a single
NIC.
This mode is best used for teaming in both native and Hyper-V environments except when:
1) Teaming is being performed in a VM,
2) Switch dependent teaming (e.g., LACP) is required by policy, or
3) Operation of a two-member Active/Standby team is required by policy.
As for question number 2:
The Switch Independent/Hyper-V Port will send packets using all active team members distributing the load based on the Hyper-V switch port number. Each Hyper-V port will be bandwidth limited to not more than one team member’s bandwidth because the port
is affinitized to exactly one team member at any point in time.
In all cases where this configuration was recommended back in Windows Server 2012 the new configuration in 2012 R2, Switch Independent/Dynamic, will provide better performance.
Microsoft recommend for a clustered Hyper-V deployment
in Windows server 2012 to use Switch Independent/Hyper-V Port as you mentioned and to configure
Hyper-V QoS that applies to the virtual switch. (Configure minimum bandwidth in
weight mode instead of in bits per second and Enable and configure QoS
for all virtual network adapters
Did you apply QoS on the Converged vSwitch after you
created the team?? However Nodes are considered down if they do not respond to 5 heartbeats. The Switch Independent/Hyper-V Port does not cause the cluster to goes down if one NIC failed. The issue is somewhere else and not in the teaming mode
that you choose.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Server 2012 Built-In IPSec VPN & RAS & HyperV-Switch & Netgear Pro Safe Router, Tunnel Ok, but no Traffic

Hello,
i try to setup a IPSEC VPN (Site-by-Site or if not possible Client-BySite) between a Netgear Pro Safe Router and Windows Server 2012.
The Problem: Tunnel is up and running, but no Ping, no traffic at all.
the Server 2012 uses HyperV and has one hardware-NIC with public ip, lets say 123.123.123.1.
if no site-by-site is possible in my situation with built-in-tools this server would be only a client-site which would "dial-up" to the netgear box.
the server has a second virtual NIC with IP 192.168.137.1. Routing and RAS is enabled, because there are two virtual other servers whichs has 192.168.137.2 and 192.168.137.3.
The Netgear-ProSafe has public ip 122.122.122.1 and LAN-Subnet 192.168.21.0/24.
I created the Tunnel in the Advanced-Firewall-Options-Window. Both, Windows and the Router, say, the VPN-Tunnel is okay. Also, i can see ESP-Packets with wireshark.
If i ping (from router to server and other direction) i get no response. Some people said, the RAS itselfe could not accept packages, but i tried from one of the virtual clients also (192.168.137.2) and no ping there also.
i tried to add a route for subnet 192.168.21.0 with 192.168.137.1 as gateway but that didn't helped also.
now, after all this time i spend today to this problem i'm a bit confused.
as i know vpn-connections there are always virtual devices, and routes for the vpn-subnets assigned to this device.
the windows firewall does not create any device, and it does not create any route - i suppose, this is because "routing and ras or windows firewall-service" does this work "internally". is that correct? do i need any routes?
i was wondering why the ICMP packet from my ping in wireshark had the public ip as source (123.123.123.1) and not the "internal" 192.168.137.1 - and i tried to restrict the vpn-rule only for the virtual internal NIC but this isn't possible, as
it is no option inside the gui.
it would be great if somebody could explain me how config and packages SHOULD look....i've never used the built-in vpn/ipsec/ras services before, so i don't know how things has to be for a correct working environment. also, i need a solution and any help
to solve the problem would be great also!
now i try to sleep one night - maybe i get some nice idea after some hours of sleeping. good night.
Addition: After some more tests i find out that if i change the local endpoint (endpoint 1) from the virtual network (192.168.137.0/24) to the public ip of the server (123.123.123.1) inside the tunnel-rule and inside the vpn-policy of the router i can access
the netgear and other devices in the remote-network 192.168.21.0 over this ip-adresses. ping is not working, but other things seems to work fine. i want to be able to ping as well ofcourse and this wired configuration looks wrong to me...can some network-professional
help out with an explanation?
Second Addition: I can set the Local Endpoint also to "any" and it does work - but ping still does not work :-(
Third Addition: The Ping does work if i disable the NAT-Functionality on the Physical NIC. ....mhm.....

I would definitly recommend the usage of a virtual router instead using windows onboard-firewall to make the site-to-site tunnel!
as you can see in my linked thread above (Link)
this scenario is not supported from microsoft! you will run into problems!
we do run a hyperv virtual machine and install the wonderful distribution pfsense inside this box. pfsense is a software-linux-router with ipsec-functionality, which works like a charm!
and by the way i recommend to not use the products of netgear! they are expensive, very slow and the service is not good!
we have good experience with Vigor-Routers! They are less expensive, the Service is very good, and the devices are much faster, AND! ...the vpn-connections stay stable up!
this experience was very time-intensive to make! hope this will help someone else in the future.

Safe Mode In server 2012

Similar Messages

Maybe you are looking for