Safety stock as per location possible ?

I want to maintain a buffer stock at a storage location which is not main storage location of material. An automatic reservation should be created if stock level goes down.
Is it possible ?

Yes it is possible by defining MRP at storage loc level with reorder point and maintain the safety stock at sub storage location.
When you run MRP, if the stock is below safetry stock and reorder point levele system will create a reservation from mainstorage location to sub storage loction
Hence in MRP 4 view  forplant and storage loc maintaine - maintain the setting MRP carriedout sepereately in the storage location.
Please come back if required

Similar Messages

  • Dynamic Safety Stock wih Safety daysu2019 supply

    Hi
    In APO PP/DS, my compagny want to set up for several products,  two safety stock :
    1- Dynamic Safety Stock in order to prevent when actual usage exceeds forecasted demand
    2 - Safety day's to prevent when time it takes to receive a replenishement shipment exceeds the projected lead time (usual problem in our business)
    For this two cases we use
    1- MB
    2 -SZ
    So my question, how it's possible to mix this 2 safety stock methods? Is possible to create a custom method or custom heuristic in order to do that?
    Thanks for your help
    Youri

    Hi
    We have ever try without success other solutions as :
    SM and MM
    MB with Good Receipt Time in APO = ( Good Receipt in R/3 + Safety Days )
    The only solution seem AT/BT method but we can't make difference between safety stock and safety days during monitoring
    Thanks for your help

  • Different safety stocks for differnt storage locations?

    Hi all,
    Can any one tell me if it is possible to set two different safety stocks for two diffetent storage lacations for one materila?
    If yes, How?
    Thank you,
    Utpal

    Hello UNP,
    Normally, planning is useally carried out at plant level, however you can do MRP at Sloc level as well.
    Safety stock is planning data which is defined for entire plant where as reorder level and replinishment quantity can be defined saperately for each storage location, but not safety stock.
    hope this helps.
    Regards
    Arif Mansuri

  • Whether it is possible to make auto goods issue below safety stock level

    Hi SAP Gurus,
    I am implementing MRP for generating stock transfer Planned orders from a Main Mother Plant to different Plants. We have defined a Safety stock level for materials at main Plant level.
    There is a auto program available for generating auto goods issue against Purchase orders.
    System picks up Qty as long as unrestricted stock exists for the material during auto goods issue.
    System dont pick up any Qty below safety stock level (manual goods issue works below safety stock level).
    We are defining safety stock to meet sudden requirements and have time for new procurement.
    But it should allow us to do auto goods issue below safety stock level.
    Whether this is possible and what need to be done ?
    Thanks and Regards,
    R.Velmurugan.

    Hi Velmurugan,
    I don't think auto GR is a problem from safety stock. Auto Gr can be done by two ways.
    1. Control key and assigning the control key in operation(Preferably in last operation)
    2. In production scheduling profile you can do it. You have to assign the production scheduling profile in material master work scheduling view.
    Regards,
    Krishnendu.

  • Stock at Storage Location

    Hello there,
      Could anyone tell me the possibility of populating stock at storage location. I am using 2lis_03_BF and 2lis_03_UM for populating the Material Movements cube in BW 3.5. When we checked the data all the values for materials are populated against Plant level and the quantities at Plant - Storage location level.
      I have implemented the SAP How to Document for populating the values at storage location level but I have two issues on this.
    1. The actual values of materials are not accurate when displayed at Plant-Storage location level. Because they are calculated using Average value formula as per the note. How to realize the actual values at storage location level also taking into consideration the respective revaluation done at plant level?
    2. If I run the report for all Plants - storage locations it is either timing out or taking a lot of time to display. We are maintaining 45 plants and 10 storage locations.
    Could anyone tell me how to realize these values at storage location in an efficient way if possible.
    Thanks in advance,
    Raj

    Hi Anil,
    Thanks for the reply. Yes I did implement that note to get the values at storage location level. The values I am getting are not accurate after following this note. Example It is displaying the value of the material equally for all storage location which are valuated at different prices. ( Taking average values).
    Also If the material was revaluated the price correction is created at plant level and it is not taking the correction into consideration for displaying the individual values i.e against respective storage location. But I am getting the total result at storage location accurately.
    Is it possible in BW to display the values at storage location accurately as in R/3.
    Thanks,
    Raj

  • Calculation of Safety Stock and Reorder Point under Forecast Model T

    Hi Gurus!
    Happy Holiday!
    I would like to ask for your assistance on how the the safety stock and reorder point was calculated with the following values available. I would really appreciate it if you could give me details on the calculation.
    Below are the values:
    Basic data
    Forecast date        01.12.2009        Unit                  CTN
    Forecast model       T                 Service level         0.0
    Period indicator     M                 Paramtr profile
    Control data
    Initialization                                Tracking limit        4.000
    Model selection      A                 Procedure selection   2
    Parameter optimizatio                Optimization level    F
    Alpha factor         0,10               Beta factor           0,10
    Gamma factor       0,00              Delta factor          0,30
    Basic value           5.464-           Trend value          5.603-
    MAD                      4.758            Error total              4.722
    Safety stock         1                   Reorder pnt.          1
    No. of values
    Consumption           6                Forecast periods       1
    Initial. periods      0                Fixed periods          0
    Periods per season   12
    Historical data
    Period                Original     Corrected value
    11.2009                3.000              3.000
    10.2009                0.000              0.000
    09.2009                0.000              0.000
    08.2009                9.000              9.000
    07.2009               21.000             21.000
    06.2009               20.300             20.300
    Forecast results
    Period                Original     Corrected value
    12.2009                0.000              0.000
    Appreciate your assistance!
    Thank you and Happy Holidays!
    Ji

    Sweth, you are asking for consulting, and in my opinion it is way beyond what can or should be reasonable to achieve in such a forum. You are asking complex questions, that most probable have more than one possible answer.
    I suggest that you get on-site help from a knowledgeable and experienced consultant. These are crucial business issues, and should be dealt seriously.

  • How can I include the minimum stock of storage location in the mrp run.

    Hi all,
    I have in plant 1030 storage location 1001 and 1006.
    MRP1  Lot Size = EX
               MRP type = PD
               Reorder Point = 5
    MRP2  Safety Stock = 5
    MRP4 for 1001 is not filled
    MRP4 for 1006 Sloc MRP Ind = 2
                             Reorder point = 2
                             Replenishment qty = 3
    If no stock and I run the mrp I get
    a PurRqs for 8 with a automatic MtlRes of 3 going to storage loc 1006
    If I create a reservation in 1006 for 10 units and run the MRP again
    a PurRqs for 15 with a MtlRes of 10 going to storage loc 1006.
    I want the result to be PurRqs for 18 with a MtlRes of 13 going to storage loc 1006.
    10 for the reservation and 3 to fill storage loc 1006 with the replenishment qty.
    How can I acheive this?
    Best Regards!
    Curtis

    Hello Curtins
    Please observe what is stated on question 6 of FAQ note 550954, regarding storage locations planned separately:
    6. Question:
        A storage location should be planned separately. Is it possible to
        consider external requirements?
        Answer:
        No. The storage location MRP is a very simple reorder point planning
        procedure, during which only reorder point and replenishment
        quantity are defined. More complex settings can be implemented via
        storage location MRP areas.
    Therefore, I'd suggest you to use MRP areas to map this scenario.
    Best Regards
    Caetano Almeida

  • Dynamic Safety Stock - Custom logic

    Hi,
    Are there any exits / enhancements where we can build customer specific logic to periodically update Safety Stock values in the Material Master (MRP Area)?
    Thanks.
    Raj

    Hi,
    Thanks for your response.
    We want to maintain a Minimum Stock Level at various Storage Locations periodically. However the value is computed based on certain historical values (and not mere consumption). There is an industry logic which will compute this figure.
    We need to find a solution to compute this figure as per logic and use it in MRP for planning along with other requirements (such as Reservations, Customer Orders, Forecast etc.,). Since the count of parts and associated historical values are quite high, computing this offline is tedious.
    Is there a better way to address this without Z - Devpt.?
    I can provide any other info if reqd.
    Thanks.
    Raj

  • Negative stock and Stock below safety stock

    Hi,
    Both negative stock and stock below safety stock create procurement proposals - internal or external.
    But what is the difference between them?
    Thanks in advance.

    Hi,
    NEGATIVE STOCK:
       Negative stock function used when you want to post Goods Issue quantity that larger than the book quantity.
    For example: you have stock of material A000 = 90 qty and you want to Goods Issue with 100 qty.
    Negative stock function is not relevant for the procurement, It can only use for the excess qty issue to to the production than stock qty. System will not create PR .
    You need to do configuration setting to use this function.
    Cust: In customizing negative stock are must allow for a valuation area, Plant and Storage location level.
              In addition you can set the special stock at plant level such as
    Consignment
    Material provided to vendor
    consignment stock at customer
    sales order stock
    project stock
    returnable packaging with customer
    returnable transport packaging
    Application: The indicator for negative stock is with the storage data in the material master mast be maintained.
    Note: It is possible for unrestricted use and blocked stock only.
    With the standard price, There are no special features to the negative stock. But with the Moving average price , a price diff account can be posted to when goods are received.
    STOCK BELOW SAFETY STOCK.
    The Safety stock should cover any excess material consumption that may occur during the replenishment lead time as well as the normal requirements when deliveries delayed.
    The Safety stock is therefore part of reorder point.
    You do not required any special setting to use safety function. Just need to maintain the safety stock level in the material master.
    If stock reduce below safety stock, system will create procurement  proposal i.e Planned order or Purchase requisition.
    I hope it will clear your query.
    Ashish Panchal

  • Safety stock, forecasting doubts

    Can anyone guide me on my doubts,
    1) Safety stock : While describing safety stock in oracle, we are mentioning date and quantity. Take a example - item = xyz, Date = 01 Jan 2012, Qty = 10. is it means that 01 Jan 2011 onward, stock level of item xyz should be atleast 10. If it is less that 10 after 10 Jan, then suggest planned order from ASCP.. ?
    2.1) I can see that we can manually mention safety stock, system will calculate safety stock. In case of manual, xyz item attribute should be 'Not MRP" Planned. I can mention item, date and qty for in safety stock form.
    2.2) In case of system to calculate Safety stock, I have mentioned attribute value as " MRP planned", mentioned safety stock days as well. Here I have created a forecast and ran "Reload safety stocks" with method as "User defined %" with forecast created for SS calculation. Now I can see corresponding newly created SS in system.
    Now I have ran data collection with calculate safety stock = Yes, and after than launched plan as well. But I am not able to see both type of safety stock in ASCP workbench. I will say, I am not able to see any safety stock demand in workbench in any one of organization. Like to inform you that while doing collection, I have selected all organizations which are enabled and also same was selected while launching plan.. so whats wrong and so not able to see any safety stock demand in system.
    3) Forecasting: I can put forecasting at component instead of products level ( ie finished good). Now suppose, I have kept forecasting at component level, means I have mentioned component item, qty and due date in forecast form. Now ASCP will consider this as demand and drive material, may suggest planned order. Now same time, I have booked a SO, having a products, which requires that forecasted component to do assembly. As there is demand against forecast and demand for SO, will drive material and this will be duplication. So netting of forecast is must, which we can do through forecast consumption. Now in my scenario, I have mentioned forecast for child in forecast and SO is booked against finished item. Now my question is - is there any provision for component level consumption based on finished good SO.. ?
    Let me know if anyone needs more clarity on above case,
    Thanks and Regards,
    Dipak

    Thanks Partha your help. Following solution is working on MRP, but it seems that not working on ASCP. I am pasting process here, Here V is long LT item.
    1) Define a planning bill forecast, consider FC00. This contains aggregated demand of V against a particular date.
    2) We will explode forecast from FC00 to FC01, where you can see forecast against component of ‘planning bill item’ along with Qty and date. Qty will be derived from planning percentage mentioned in planning bill.
    3) In order to convert these forecast demand in purchase order, we have to use a plan.. say ‘Small Plan’. Purpose of this plan is to consider ‘Forecast FC01’ only as demand ( ie do not consider any SO, On-hand etc for calculation ), and create a supply by release planned order. Here needs to run collection and also needs to mention demand schedule as ‘FC01’ in plan parameter.
    4) Now all planned order as per forecast will be released and converted either requisition / PO. This may be firm / non firm.
    5) Now define another Master plan, ( in order case, this plan will be global plan) which consider all supply and all demand sources. But ensure that we will not mention FC00 / FC01 forecast in this plan demand schedule. This plan will consider PO / requisition supply created via ‘Small Plan’, and will peg to actual SO. This will not peg to FC 01 as we have not attached this forecast to master plan demand schedule.
    6) Now if SO dependent demand of V is less than PO qty, then master plan will suggest to raise PO vice versa it will suggest to cancel / re-schedule in –out. We can filter such suggestion by exception / action / supplier name etc. So we will NOT do cancellation / reschedule out, but we will do re-schedule in if possible. This will ensure that we will have enough supply of V irrespective of SO demand.
    From above, we can use planning bill as input for long LT items planning and output will purchase order in advance of SO, also consumption ( indirectly) of forecast can happen. If we will mention ‘include past due forecast = 0’ in planning parameter, then automatically past forecast will be excluded from planning.In addition, we can use master plan ‘supply-demand’ workbecnch output for monitering SO demand trend with forecast entry done by planner.
    Now am checking on ASCP and believe that it will work in ASCP as well.
    Thanks for support ,
    Dipak

  • Deployment - Safety stock

    Hi expert,
    I wanted to know How ATD( available to deploy) will be caluclated. Is there any settings which we have to make to consider ATD = Stock on Hnade - Safety stock.
    Ex :  Stock is 110
    Safety stock : 10
    Result i want is
    ATD = 100.
    When we run deployment it should take 100 has input to deployment( Excluding Safety stock).
    Please suggest any solution, This is Urgent requirement
    Thanks in advance
    Best regards,
    Srinivas

    Hi,
    ATD quantity is calculated based on the category group defined at location or product location level in the ATD Receipts field in the ATP or SNP2 tab respectively, product location will overwrite value defined at location level. If you dont define any category group it will take default category group ATR to calculate the ATD quantinty.
    If you want specific categories only to be available for deployment you should create a custom category group with the required categories and populate it either at location or product location level as per your requirement.
    The Macro reads this category group and populates the ATD Receipts field in Planning book (this quantity is used for deployment) depending on the category and quantity available.
    Their is no standard setting by which you can reduce the Safety stock quantity from the ATD quantity directly, you need to do certain customizations to modify the ATD quantity.
    You can either reduce the Safety stock directly from the ATD quantity using the Macro functionality which I think is very difficult or you can put the quantity equivalent to Safety stock in the ATD Issues using development in Macro which i think should be the correct way to achieve your objective as this is the standard behavior in SAP.
    Once you put the quantity equivalant to safety stock in ATD Issues it will reduce the ATD quantity by corresponding value.
    Only check I think you need to build is that the ATD quantity is greater than Safety Stock before reducing the ATD.
    Thanks,
    Sanjog

  • Push Deployment with Safety Stock Horizon taken into account

    Hi,
    I would like to know if anyone has worked in the Push Deployment - Rule - S -With Push taking the safety stock horizon into account,
    If Yes, Please let me know how it should work....If possible in details.
    Regards
    Tarit

    Hi,
    For confirm planned goods issue for which you use the safety stock in the source location to cover these goods issue.
    if the difference between the requirements date and the deploy date is lower than the safety horizon.
    This means that the system only falls below the safety stock  that specified in the LOT SIZE tab. of loc prodcut master
    if the demand covered in the safety stock horizon.
    Regards.
    MJ

  • Availability Check required without "Safety Stock"

    Hi,
    I have a fert material "FG' whose prodn order i am creating.
    This FG has a child Component "RM"
    Available Stock for RM = 20
    Safety Stock for RM =     20
    No Receipts / No Reservations exists for RM.
    I want the production order not to consider SAFETY STOCK. Hence in OPJJ i removed the Tick "Include Safety Stock".
    When i create production order, as per the above setting, it should show " Material Avaliable", but instead it is showing Material Shortage.
    Plz guide.
    Thanks in advance,
    Harris

    Hi,
    Here is my Availability settings.
    Availability Check = Z2
    Stocks     
    Include Safety Stock     
    Stockin Transfer     X
    Incl. Quality Stock     X
    Incl. Blocked Stock     
    Incl. Restricted - Use Stock     
    W/o Subcontracting     
    Replineshment Lead Time     
    Check without RLT     X
    Storage Location Insp.     
    No stor. Locn inspecn.     
    Missing parts processing     
    Checking period: GR     0
    Receipts in past     
    In/Outward Movements     
    Incl. purchase orders     
    Incl. purchase req.     
    Incl. dep. Reqt.     X
    Incl. reservations     X
    Incl. sales reqt     X
    Incl. deliveries     X
    Incl shipping notifcn     
    Incl depe. Reservations     X
    Incl. rel. ord reqs     
    Incl. Planned orders     
    Incl. Production orders     
    This Availability, Z2 is maintained in MRP3 view also.
    Regards,
    Harris
    Edited by: Harris Panchal on Nov 17, 2010 2:27 PM

  • Report on current stock and safety stock

    Hi,
    I want to have the report on current stock and safety stock.
    In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
    Thanks,
    Kiran

    You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
    The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
    whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
    For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
    use tcode
    MBLB to know stock at vendor.
    MB54 - Consignment Stock.

  • Reports:- Stock,Priod Wise Report, Stock value, Storage Location, WBS Repor

    Dear All,
    Needed some of the Reports in MM Material Mangment
    1. Stock Report  Value Wise
    2. Stock Report  Period Wise
    3. Stock Report Storage Location wise
    4. Stock Report  WBS wise
    5 . Stock Value
    Can I get all my requirement in One Report; or Individually also is fine. Please Do

    Check MC.9
    It will be helpful. you an drill down the report as per your need.
    Regards,
    S Anand

Maybe you are looking for

  • Anyone using BlueTooth with MSI KT3 Ultra-Aru?

    Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru? Where can one get the transmitter?  (assuming it works)

  • Delivery to Europe??

    Hey.... How can I get apple.com/store to send my MacBook to Denmark, and can I get it giftrapped? (from US, i'm not interrested in buying it from a danish store) regards Tobias

  • ISE and SMS notification

    Environment ISE 1.1.2 As already stated in other posts in this forum, it appears there is a kind of limitation when configuring SMS Notification options via the ISE GUI interface under the "Administration ==> Web Portal Management ==> Settings ==> Sp

  • DB-API in ABAP and J2EE

    Hello! I have two questions regarding the communication mechanisms between ABAP- and J2EE-Stack. 1)Is Jco the only one solution to communicate between ABAP- and J2EE, or exist other possibilities (if Yes, is there some comparison papers: performance,

  • What is the use of PIVOT_FIELD_TAB in FM - EXCEL_OLE_STANDARD_DAT

    Hi, In the Function Module 'EXCEL_OLE_STANDARD_DAT' ,in the TABLES---PIVOT_FIELD_TAB is present. can anyone explain me what will be the result of using the PIVOT_FIELD_TAB. Thanks in Advance, Kiranmai.