Switch Off rounding for BOM Components in Sales Order

Hi all,
We are using a multi-level sales BOM that has finished goods as components. These materials have a rounding profile attached to them. However, we want the rounding profile to be active ONLY when these materials are sold individually and not as a part of the BOM. Is there a way to switch off rounding for child level materials when they are a part of the BOM ?
Appreciate your responses.
Thanks and regards,
Rohit Zalani
Edited by: ROHIT ZALANI on Apr 21, 2008 11:15 PM

We solved the same using the item cat configuration.

Similar Messages

Unable to enter multiple Schedule lines for BOM material in Sales Order

Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
Samiksh

Hi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

Switch off BDocs for BUPA_REL

Hi,
Can someone please tell me how to switch off bdocs for relationships?
Can this be done on Bdoc type customizing?
Thanks

Hi Robin,
Its not first time load to R/3.I am still getting the error.
The error message is
Partner 0090003474(452FCF2693D900AD000000000A64D910): The following errors occurred,
E:COM_BUPA:030 0090003474
Pl. suggest ,
Best regards,
Prashant

BOM Production in Sale Order

Hi all,
I have a finished good is ABC, strategy is 20 (make to order).
I have a variant for ABC, the quantity of components in ABC is 1 pc. When I create a Sale order, I have to choose some characterristics. It depend on requirement of customer. I can see cost estimate in cost report function of Sale Order and inform to customer. My question is "if I change the quantiy of component in ABC is 2 or 3 pc, the cost estimate will be change?"
If not? how i see the cost of order after change component in BOM.
Thanks all

Dear,
I have noy fully understood your question. What I understood is you have created Sales order and then you chnaged the BOM qty of sales order BOM. Will it chnage the cost estimation?
It depends. If you have chnaged the BOM after sales order is created, if you go for recost run, it may change. and you may get the correct cost.
Are you looking for this?
Raj

BOM explosion in sales order

Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
Emily

Hi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla

Rounding at Header Level in Sales order

Hi all SD Expert,
Question:
Can rounding mechanism be applied at Header level in Sales Order?
Summary:
The government of Malaysia have implemented the rounding mechanism to the nearest multiple of 5 cents over the counter transaction. This mechanism shall apply to the total amount of a bill.
Example:
- $1.01 or $1.02 will be rounded down to $1.00
- $1.03 or $1.04 will be rounded up to $1.05
- $1.06 or $1.07 will be rounded down to $1.05
- $1.08 or $1.09 will be rounded up to $1.10
refer http://www.bnm.gov.my/index.php?ch=209&pg=657&ac=567 for more info
My Problem:
SAP Note 1165950 suits well enough for 1 item per sales order.
Example:
Total Bill = $1.38 (posted to a dedicated G/L account)
Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
Total customer to pay = $1.40
But, if I have 2 or more item per sales order, my rounding mechanism does not meet the requirement. Example:
Item 1:
Total Bill = $1.38 (posted to a dedicated G/L account)
Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
Total customer to pay = $1.40
Item 2:
Total Bill = $1.38 (posted to a dedicated G/L account)
Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
Total customer to pay = $1.40
Total Item 1 + Item 2 shown in header level = $2.80
In Header Level, the rounding figure shows +0.04 (rounding adjustment item 1 + item 2). I dont want my sales order to round the value at item level.
The correct calculation to suit the regulation is:
Item 1 + Item 2: $1.38 + $1.38 = $2.76
Rounding Adjustment at Header: -0.01
Total customer to pay = $2.75
can someone help me?
TQ
Ezwardi

Dear Tengku
Please try with this.
Go to V/08, for the net value field, maintain Routine 16 in the Alt. Cal. Type. Also add Routine 17 to Netvalue.
As you know Condition types are assigned at each item level. So rounding off is calculated at each item level. But by assigning a tick in the Group Condition while defining Rounding off Condition, you can do rounding off at invoice level. The difference is automatically adjusted at each item.
thanks
G. Lakshmipathi

Rounding when any discount in sales order

hi Gurus,
Please help me for pricing condition when create sales order.
when creating sales order there are some sales order the condition should be:
if there is discount(condition type : ZD23) should be rounding if there is no discount rounding should be off.
in which exit or routine i have to be modified?
Currently i try to add routine by VOFM code.
FORM KOBED_600.
*{   INSERT         TZRK908033                                        1
       sy-subrc = 4.
      check: XWORKF NE '0.00' OR XWORKF NE SPACE.
       check: t001r-reinh ne 0.
       sy-subrc = 0.
*}   INSERT
ENDFORM.
but it's not work because above code just work for no discount condition. or any suggestion for my requirement?
anyone can help me please?

hi Archana Kumari thanks for reply.
I think my problem is different from the link that you have post.
my problem is
1.sales order 000001
    10. item 001 -> no discount
    20. Item 002 -> no discount.
1.sales order 000002
    10. item 001 -> has discount
    20. Item 002 -> has no discount
the rounding should be happen in sales order 000002 and will not happen in sales order 000001.
in which routine should i define code for activate the rounding.
please help me.

COGS determination for Free of cost sales order

Hi All,
We have an issue regarding the COGS determination for Free of cost sales order. We created a free of cost sales order. But i need to know whether this sales order items will hit to COGS or not? If so how do i check whetehr its has been charged to COGS or not? and we have an issue raised saying thst one material in this sales order has not being charged to COGS. So please help me to solve this issue. Ihave checked the account assignment in GBB-VAX. And is there anyting to do with the settlement profile for COGS determination?.
Thanks and regards
Uday

Hi,
During PGI a material document and accounting doc gets created which would hit COGS account.
You're talking about one specific sales order in which for one material it didn't hit COGS account or any order you're creating now with that material has an issue? If its a specific material which has an issue always..then something is wrong with that material master setup. Also you can go to the reported Sales order--doc flow to the PGI document and check the accounting doc and if its not posted..check the analysis why its not posted?
And if its one off then I would suggest 2 options:
1) Reverse the goods movement, cancel the delivery or if billing has already been done..cancel the billing as well. And re-do the cycle. This always ensures correct posting.--> Recommended option.
2) Manual adjustment in FI.
And settlement profile is Controlling concept..not sure you would get any help on this in this forum.
Regards
RS

BOM selection in sales order

hello, friends.
when selecting the BOM in the sales order, the selection screen displays alternative BOMs for 1 usage type only, and will show the other usages one at a time only if the first type does not exist. the sequence depends on the priorities (access sequence) set in IMG, and settings in item category.
my questions are:
1. does the 'next page' button in the selection screen refer to additional BOMs of the only same usage type?
2. is it possible to show other usage types in the same selection screen? if yes, where do we configure this
many thanks for your inputs.

hello, Rags.
actually, BOM selection is working fine for us. my question was more of a theoretical one. to clarify the issue, let me cite an example:
1. for material A001, i create 5 alternative BOMs.
2. of these 5 BOMs, 3 have usage type SD, and 2 have usage type Production.
3. when you enter your BOM header material in the sales order, a selection screen will appear. because of the priorities set in IMG, it will show you only the 3 alternate BOMs of the SD usage type.
3. the system will display the 2 other production BOMs only if there are no SD usage BOMs or if these have been deactivated, or if you change the order of priority in IMG.
4. you cannot change the usage type in the BOM selection screen because this field is not available for input. there are "next page" buttons, and i'm wondering if this is or is not just for long lists of alternate BOMs with a single usage type.
my question: is it possible to show all 5 BOMs regardless of usage in the same list, or in different pages?
many thanks.
Edited by: jonathan y on Apr 3, 2009 7:55 PM

BOM Usage and Sales order BOM

Can some one bring our the difference between BOM usage in the creation of a material bom and a Sales order BOM - To be more specific, when you are creating a BOM using the tcode cs01, I get a field called BOM usage where I can select it as 5 and define it as relevant to Sales and Distribution. I can also create a BOM which is Sales order specific using CS61 tcode. what is the difference between the two? When will the bom created using CS61 explode and when will the other one explode?
Thanks for your reply in advance....

Hi
while using the material in each dept. the usage differs so for that sap provided this function. for sales bom is used only sales and also that material already exist in the plant. and mm bom the material has to procure from the some third party that all functionality will control throgh the maitaning bom usage.
further your explanation i give below info.
Text
BOM Usage
Definition
This key defines the area (such as engineering/design or production) where a BOM can be used.
Use
By setting various indicators, you can define the maximum configuration of the item status and define whether an item must be or cannot be processed in a particular area (such as production).
Examples
A material is used in the areas production and costing in a company. For each area, you maintain a separate BOM with different items:
Production BOM:
This BOM contains items that are relevant to production. These items are copied to the planned order. Dependent requirements are generated for them, and they are copied to the production order.
Costing BOM:
This BOM contains items that are relevant to determining the material costs of a product.
When you calculate production costs using a quantity structure, the system automatically determines the BOM and all the BOM items that are relevant to costing, in order to calculate manufacturing costs.
pls find the config table which will give u clear picture about bom usage.
STLAN     PMPFE     PMPKO     PMPKA     PMPRV     PMPVS     PMPIN     PMPER     ANTXT
1     +     .     .     -     -     -     .     Production
2     .     +     .     -     -     -     .     Engineering/Design
3     .     .     .     .     -     -     .     Universal
4     -     -     .     -     -     +     .     Plant Maintenance
5     .     .     +     +     -     -     .     Sales and Distribution
6     .     .     +     .     -     -     .     Costing
7     .     -     .     .     -     -     -     Empties
8     -     .     -     -     -     -     -     Stability Study
M     .     .     .     .     -     .     .     External Munitions Display
Z     +     .     +     +     -     -     .     Rebranding Sales BOM (1:1)
Thanks
Regards
Hari Shankar

Prevent creation of reservation for selected components on Production order

Hello all,
I am aware that the production order reservation creation is dependant on the order type, but is it possible to avoid the reservation creation for few components on the order ? Any techincal way? We want to issue our components to a different batch than the one reserved during the production order creation.
Any help will be greatly apprciated.
Thanks,
Swetha

Your material is get reserved for Production order as per the Order start date & Order release. What you can do is make the start date of the Production order & release it. If any other production order are already there & you can re set the ATP of that production order.
Say there is one production order starting 2 days after & your all raw material is blocked for this production order. And the other production is having date after this now you want to give ATP from 1st order to 2nd order. For this 1st make the start date of 2nd prod order before 1st. Then Go to COMAC select both Prod Ord & GO ATP with check reset ATP. You see that ATP is passed from 1st Prd order tp 2nd.
Regards
Abhijit Gautam

Free finish goods for certain level of sales order amount.

Hi Gurus,
I want to add some free finish goods if the sales order amount is greather than a certain amount for OR sales order type
For example : if the sales order net amount is greather than 1000 - I want to automaticaly add a FG - 347234FG .
Is it possible without having SAP retail module ?

Khaled is right for details refer to sap help page:
http://help.sap.com/saphelp_46c/helpdata/en/dd/55fa68545a11d1a7020000e829fd11/frameset.htm
Good luck!

Pricing For Text Item in Sales Order

Hi ,
How to give price for text item in sales order.
With regards.
Afzal

Hi Afzal,
consider to create a single service material as a generic one, type DIEN, with basic data and sales org views, with item category group LEIS (it will determine item category TAX in sales order). Material description could be "Don't forget to change me!" so in sales order user remembers to changes the description according to the especific sales order requirements.
Regards,
JM

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

Switch Off rounding for BOM Components in Sales Order

Similar Messages

Maybe you are looking for