Sales Item's Qty is disabled in change mode (VA02) of Sales Order.

Hi,
1) We create Sales order (L2) from Service Order(DP90 tcode), system automatically selects 'LABOR HOURS' material, based on actual hours posted for a service order and adds this as 1st line item in Sales Order. When order is saved and we go back to VA02, we find that LABOR HOURS item is disabled, meaning we cannot change Qty but can only change Amount. The item is not billed yet.
2) If we add 2nd line item with same 'LABOR HOURS'  material in change mode(VA02), Ssave and get back to VA02 again, this item is enabled. We want to make the 1st Line item's qty enabled so users can change the qty before creating billing document.
Since the 1st line item is created from DP90 tcode, system does not allow us to change the Qty ? Any help is appreciated.
Niranjan

Hi Jelena,
Thanks once again for your time and responding back.
If you remember, I had mentioned that we are creating Sales order from DP90 tcode. We had created a custom screen(and tcode) called ZWIN where we had provided a button to create Sales order from Service Order using DP90 tcode. In this custom screen, we were calling BDC for DP90 and creating Sales order. On the same custom screen, we had given option where users could enter other materials. For these extra materials added, we were using BAPI 'BAPI_SALESORDER_CHANGE', to add these new materials. Here is how I fixed it.
1) DP90 would have created sales order with Item 10 for LABOR HOURS.
2) Then  'BAPI_SALESORDER_CHANGE' would have added any extra materials selected on Custom screen.
3) While calling this BAPI, I deleted Item 10 with LABOR HOURS and added new Line Item 11 with same LABOR HOURS.
Now when I get into VA02, I see that LABOR HOURS line is enabled, which means we can change Qty.
This avoided deleting line item and adding same item in VA02 when there was a change in qty later.
Thanks again.
Niranjan

Similar Messages

  • Change of plant in sales order.

    One type of sales order that we use is sales that we don't have stock and we get them only if there is a customer asking fro this. At sales order by changing the item category, the schedule line is changed and a purchase requisition is being created.
    At the point of the sales order we agree with the customer to get the items from plant A.
    We transform the purchase requisition to purchase order and we get the items as it is suggested in plant A.
    For any reason, the customer wants to get the items now from plant B.
    How is it possible to change the plant in the sales order, move the items from plant A to plant B, so to make the delivery from plant B, as the customer wants.

    Hi
    I think it is possible to change the Plant in Change mode (VA02) until you donu2019t make the delivery for the sales order.
    Now for Stock Transfer use the below procedure:
    [FORUM|stock transfer from plant to plant;
    Regards
    Edited by: SAP2020 on Nov 25, 2009 9:56 AM

  • Jump from Sales Order to Purchase Order and back again (all in change mode)

    Hi,
    Situation is this:
      - Sales Order is created with 10 items. 4 items are created with connection to Purchase Order.
      - User open Sales Order in change mode
      - User goes to item 20 that has a related Purchase Order
      - User wants to jump to related Purchase Order and make an update here
      - User wants to be able to jump back to Sales Order Item 20 from Purchase Order
    When user jumps to Purchase Order in change mode, then this Purchase Order will also block the same Sales Order, that was open. This can be handled with dequeue and enqueue.
    Problem is that when Purchase Order is saved it will make an update to the Sales Order in the background. When user jumps back to Sales Order then this Sales Order is still open with old data and these data does not reflect data that can have been updated by the Purchase Order.
    Also: When Purchase Order is making updates to the Sales Order then e.g. Message Out Table NAST is automatically updated (insert and delete records). If user then manually updates the Sales Order with old information, then System Dump appears as Sales Order tries to insert NAST records, that have already been inserted or delete NAST records that have already been deleted via the Purchase Order.
    This means that when user jumps back from Purchase Order to Sales Order Item 20 then Sales Order needs to be refreshed with new data after Purchase Order has saved the Sales Order.
    Are there any solution to do this in a standard way (from within SAPMV45A) ?  
    I prefer not to reopen Sales Order using syntax like CALL TRANSACTION.

    Hi,
    Thanks for reply.
    In third party PR gets created automatically but PO gets create manually.So changes get refelect in PR only not in PO.
    Can you give me the solution for completing this task.
    Thanks & Regards
    Jalaj garg

  • Mass printing of sales items

    Good afternoon,
    I need to mass print sales orders, but the message are assigned to their items. I've seen in other threads that the program SD70AV1A can be used for such. I fill the fields of the initial screen as below:
    Outout type = ZXXX
    Sort order = 01
    Processing mode = 1 (or 2 or 3)
    Sales Document = <sales order number>
    Sales Organization = ZXXX
    The problem is that the system returns a message saying that there are no messages to be printed. Has anyone experienced this error before? Important: If I try to process the message through the VA02 tcode, it works normally.
    Thanks in advance!
    Adriano Cardoso

    Adriano
    When you go in change mode -VA02- it will find and create a new output line which can be processed then.
    When you are trying to run program SD70AV1A, if there is an unprocessed output line, it will execute, otherwise it won't find it.
    So before running the program SD70AV1A, see if you can mass change the orders (VA05 or MASS)  and somehow get an unprocessed output line in them.
    Hope this helps.

  • Quantity confirmed in sales order change mode not in display mode !!!

    Dear All !!
    We have a problem in sales order .
    In sales order the line item 580 quantity confirmed 15 pc in change mode VA02 if I open the sales order in display mode VA03 the quantity confirmed “0”
    More details refer the attachment .
    Kindly advise why the system behaving like this and suggest how to control.
    Thanks in advance.
    Best Regards,
    Rampe

    Dear All !!
    The issue has been sort it out .
    Reason for cause : The Problem happened due to wrong material master data defined in material master.
    The material has been changed and marked "as configurable material" in material view "Basic Data 2".Even though the material is not configurable. So we have  forced correct value in material master and open the  sales order with VA02 and then saved in order to redetermine correct master data. Then the problem got resolved.
    Thanks for your Help.
    Best Regards
    Rampe

  • Is ATP check possible in Service Order for Sales Item?

    Hi All,
    My question, is ATP check possible in Service Order for Sales Item? My requirement is that when i create a service order in the web UI with a sales item and drill down to the item level, i see the schedule lines assignment block but w/o any Confirming date, so i want to know whether the ATP check is happening or not. For example wen i create a sales order in web UI with a sales item and drill down into the item level, the schedule line AB shows me the Confirming date checking the ATP. But this is not happening in case of service order. So kindly suggest the reason and clarify my query. Thanks
    Regards
    Sridevi

    Nobody can help me???
    Please.
    Thanks

  • Duplicate header pricing in sales order change mode

    Hi,
    I have made a sales order with a price in header condition
    When saving the order, the order goes into credit control which I release via VKM3 and create an invoice.
    When I go back to sales order in change mode (VA02), I see the header condition twice, the second one being without a price.
    In display mode, I can see the header price correctly. Also, the invoice shows the price only once.
    Please advice.

    Dear Kota,
    If i maintained as "B" than system will not allow to change in Sales order.
    See my req. is System should allow the user to change price  in Sales Order and it should not allow the user to change in Billing doc.
    Regards,
    Satya

  • Sales Items not showing up on other warehouses

    Hi All
    We are having some issues with one of our clients , they use the production module in SBO and all the Items have default warehouses assigned to them.
    All raw materials are from store 1 to store 8 then store 9 and 10 are sub assemblies for main items (finished goods) which are automatically transfered to store 13 when they are finished or completed.
    Now the problem come in when they want to use the sales items from store 13 and sell them out from the sales stores from store 17 to store 65. Once the items are complete they are transfered to respective stores after production.
    So a goods transfer function is used for this task, but when viewing the items list we don't see the other stores 17 to store 65 since they are not default warehouses for items and items are grouped by warehouse on the items list.
    What is the best solution to this scenario.
    Hope its clear
    Rgds,
    Bongani

    Hi Thanga
    Thanks for the reply , I can do the transfer to all the sales warehouse.
    The problem comes in when a user captures a marketing document , the items list is grouped by warehouse and the items on the sales warehouses are not displayed (e.g. store 17 to store 65).
    Rgds
    Bongani

  • Order confirmation through email when it's created in VA01/changed in VA02

    Hi all,
        I have a requirement whenever order created in VA01 or changed in VA02 for example order amount or shipment date, then order acknowledgement should go automatically to customers email id to update the customer. Right now we have layoutset for printout and Fax with output type PLOR.
       Can someone help me with how to automate email when order created or cahnged.
    Thanks in advance.

    Hi Kartik,
        Thanks for your reply. Right now we have std output type printing order with transmission medium 'Printout', do i need to create another custom output type with transmission medium as External send?
       And also in print program we are already converting to PDF to display on web with using RVADOPFO customized include with code,
    ITCPO-TDGETOTF  = 'X'.
    IF US_SCREEN NE SPACE.
      ITCPO-TDPREVIEW = 'X'.
      ITCPO-TDNOPRINT = 'X'.
    ENDIF.
    Call function to open the form.
    CALL FUNCTION 'OPEN_FORM'
         EXPORTING
              FORM           = TNAPR-FONAM
              LANGUAGE       = NAST-SPRAS
              OPTIONS        = ITCPO
              ARCHIVE_INDEX  = TOA_DARA
              ARCHIVE_PARAMS = ARC_PARAMS
            device         = 'OTF_MEM'
              DEVICE         = 'PRINTER'
              DIALOG         = ' '
         EXCEPTIONS
              OTHERS         = 1.
    IF SY-SUBRC NE 0.
      RETCODE = SY-SUBRC.
       perform protocol_update.
    ENDIF.
    Can you please tell me where exactly i need to call this FM -> SO_NEW_DOCUMENT_SEND_API1.
    Regards

  • How to change material discription at sales order item level ?

    Dear Gurus,
            We have some requirement need to change material description at sales order item level , but in system it is in disable mode how to change that  into change mode in sales order item level?
    Thanks in advance
    Regards
    Venkat

    Not possible in SAP Standard.
    Instead why not create a Customer Material Info Record in T-Code - VD51?
    Alternatively it the requirement to change the Description is only for few Sales Order then create a Text ID & Enter the Description in Text Feild. Then in Smartform program wrie a code which will check for Material Description in the Text first & if not found then take from normal material Description in Sales Order.
    But Customer Material info Record seems to be the best solution.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Disable certain changes in sales order after production order release

    We are in the MTO scenario and are also using variant configuration. The business requirement is that after a production order has been released (REL status) the preceding sales order item should be “locked” for certain changes. Such changes would include VC and some other fields (e.g. quantity and dates). Some minor changes like texts should still be allowed.
    The best idea we could come up with is to put some validation in the sales order user exits, but there are some disadvantages. It seems kind of strange though that there would be no such functionality in standard SAP (e.g. some changes in the order can’t be made after a delivery has been created). Is there by chance anything in the configuration that we missed?
    I found this old thread, but it still seems to require user exits. Unfortunately couldn't find anything specifically on the production order / SO integration.
    Thank you!

    Hi Jelena,
    Try in the userexit MV45AFZZ
      (form userexit_field_modification)
    Example:
    select * from afpo where kdauf = vbap-vbeln
    and   kdpos = vbap-posnr.        
    if sy-subrc = 0.
    select single * from aufk where aufnr = afpo-aufnr.
    if aufk-loekz = ' '.                                 
    select single * from jest where objnr = aufk-objnr
    and   stat  = 'I0002''   
    and   inact = ' '.
    if sy-subrc = 0.
    screen-input = 0'.
    endif.
    endif
    endif.
    endselect.
    .H.Terras

  • Changes carry forward from sales order to Purchase order in third partysale

    Hi,
    My requirement to carry forward the changes in sales order to Purchase order in third party sale and vice versa.
    As we know most of the changes we do in sales order,get refelected in purchase requestion because PR get created automatically from SO but PO we create manually in third party scenario.
    Now my requirement to refelect the changes (changes qty, request delivery dale,adding or delition item etc.) from SO to PO and text message from PO to sales order automatically.
    Please guide me.

    Hi,
    Thanks for reply.
    In third party PR gets created automatically but PO gets create manually.So changes get refelect in PR only not in PO.
    Can you give me the solution for completing this task.
    Thanks & Regards
    Jalaj garg

  • Disable / Deactivate Update Price button in Sales order creation

    Hi Gurus,
    My requirement is to disable the 'Price Update' button in the item --> conditions screen while creating or changing the sale sorder. A set of users should not be able to update the prices using 'Update Pricing' button. Is there any way to disable/deactivate  this button in VA01 / VA02?
    Regards,
    Sam

    Hi Sam,
    I think you can control through Authorization for the set of users to update the price in the sales Order.  I think it will solve your requirement.
    Regards,
    SK

  • Delivery plant is not showing in sales order change mode

    HI FRIENDS
    I was created sales order, in the first  screen i choose the delivery plant , the delivery plant is copied to all items but when we go to sales order change mode we are unable to see the delivery plant in the first screen .

    Hi
    In VA02 if you are unable to see the delivering plant in the first screen then go  to Environment ->changes in VA02.
    Secondly , Also check in transaction variant , SHD0 for t.code VA02 wheather the VBAP-WERKS are in display or disable mode. If it is in disable mode then change it to display mode and then create the sales order again and then check wheather you are able to see the delivering plant or not
    Regards
    Srinath

  • Error Message V1810 - Make to Order No Change delivery plant in Sales Order

    Hello, for a client where I'm setting the flow intercompany , but i have  an error on the Sales Order when I must be change delivery plant.
    Scenario: Make to Order, Product configuration, Sales Order BOM created by  CS60
    Step:
    1 - I create sales order fo company X delivery plant 1000
    2 - Creates Order BOM on plant 2000 Company Y
    3 - creates MRP Planned Order
    4 - Convert Planned Order to Production Order
    For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
    If I try to change the plant on the Order system stops me with the following error:
    Message V1810 - Plant can no longer be changed
    Diagnosis
    The plant can no longer be changed in the Following situations:
    The item has been assigned to a project.
    There is a production order for the order item but it is not a staticassembly order.
    Already have accrued costs.
    For the very complex structure of the product I can not delete the production order and sales order BOM.
    How do I handle these cases?
    Can anyone help me?
    Best regards
    Giuseppe

    Hi Guiseppe,
    can you please answer some questionsa to understand your requirement.
    if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
    1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
    2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Maybe you are looking for