Sales & Operations Planning for Inter-company .

Hi
We have scenario like this :  A will  do the  fore-cast , But A is not producing .
A wants to transfer the Forecast to B. B will produce and it owns the Inventory.
Once A get the Sales order , A will send the Inter-company sales process to B.
B will relive off the inventory and get paid by A.
How to transfer the SOP via demand management for Inter-company . How to consume  the inter-company sales through demand management for Company B .
Any input will be highly appreciated.
Thanks
Jeevan

Dear
As i understood
A create a SOP and tranfer to DM, it will get netted off by sales order created in A. Since A is not producing material, system will create a intercompany PO/PR to get the material from B.
B say getting SOP data from A and tranfer it to DM. Run MRP/produce and satisfy the request of A.
Now your question is how to transfer this SOP plan to B from A.
it is simple
When you run MRP in A, if you have assigned a special procurement key in material master, in plant A, system will automatically create a intercompany PR to B.
Hence you will get the plan in B as per the given date and qty.
I hope you got the point...pl come back if required

Similar Messages

  • Different sales area for Inter company stock transfer and STO

    Hi People,
                           Is it possible to have two different sales area's for Inter company stock transfer and within the company stock transfer. The problem is in below step
    IMG->MM->Purchase Order->Setup stock transport order->Define shipping data for plants.
    In this step when you define plant as customer, the same plant as customer needs to be maintaind for both STO and Inter company and there is only one entry of sales area possible for this single plant. So, how can the task be achieved.
    I want that STO should be carried out by sales area lets say X/Y/Z
    Inter company should go through A/B/C.

    hi dear,
               It is not possible at all to have two sales area for given Plant in STO.
               What is issue in that u can Transfer any MATERIAL, just need to extend it to given sales area.
    Reagrds
    AJIT K SINGH
    HAPPY TO HELP U

  • Sales Operation Planning

    Hi All,
    In Sales Operation Planning , Can we plan a Bulk of 200 materials without Product grouping or individually.
    Please suggest if any solution available.
    Regards
    Subbu.

    Hi,
    http://sap-pphelp.blogspot.com/2010/01/sop-flexible-planning.html
    http://www.scribd.com/doc/23491525/How-to-Work-With-SIS-Structures
    1.     Create Field Catalogue MC18
    2. Create Info Structure MC21
    3. Create Update Rules for Characteristics and Key Figures MC24
    4. Activate Update Rules OMOZ
    5. Testing (Use Sales Order, Purchase Order, Material etc.) to test data
    MC30
    6. Set Parameters for Info Structures MC7f
    7. Create Planning Type for Info Structure Planning Table MC8A
    8. Generate Master Data and generate proportional factors MC9A
    9. Create Planning Hierarchy MC63
    10. Create Forecast Profile MC96
    11. Create Planning Activity MC8T
    12. Setup Mass Processing Job to generate forecast MC8D then MC8G
    13. Maintain all Material Master records with unit of measure conversions
    so that the planning table can aggregate materials into a common unit of
    measure. MM02
    14. Apply OSS patch program that enables visibility of all nine hierarchy
    planning levels in planning table. (Check version 4.5 and prior)
    15. Set up program to collect Historical transaction information (Need
    Custom ABAP program to populate the SOP table with historical data)
    16. Run Monthly Sales Forecast MC8D
    17. Transfer to COPA (if applicable)
    18. Run COPA Analysis (if applicable)
    19. Transfer forecast to Demand Management MC94 (Extra Menu -> Transfer to demand mgmt)
    20. Demand Management receive the updated Sales Forecast quantities MD61
    Regards,
    Ravi

  • Re : Organizational data for inter-company billing

    Hi
         While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant)     i am getting the following error
    " Organizational data for inter-company billing
    missing in plant SUDA "
    How to solve.
    Thanks
    Anto

    Hi Anto,
      IMG check wheather you assing Supplying company sales area to Supplying plant.
    IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
    Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
    Regards,
    M.Manickam

  • Organizational data for inter-company billing missing in plant 2200

    Organizational data for inter-company billing missing in plant 2200

    Dear Siva,
           This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
    SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
    Now you try
    I hope it will help you
    Regards,
    Murali.

  • (Sales & Operations Planning) - Can we use RMCPSOP along with IDoc method

    Hi,
        While transferring data to demand mgmt(SOP) using the standard mass processing, sometimes the job is getting failed with error u201CNo period unit maintained in material masteru201D, after analysing the code which is triggering this error, we found that when ever an S076E is not the for corresponding Planning entry, it is triggering the error. 
         We are using the standard mass processing job using IDoc method to update S076((Sales & Operations Planning), we found that sometimes the S076E table was not getting updated with the Material/Plant combination. As suggested in SAP Note 500354 Program RMCPSOP can be used to synchronize S076 and S076E tables. Seeing the technical description of the suggested program it will create S076 and S076E entries based on PGMI and PGZU tables.
    My question is
    1) Can we use the RMCPSOP along with IDoc method, does it overwrites the S076 entries which were updated with IDoc method?
    2) At what step should the RMCPSOP executed if we use IDoc method.
    Regards
    Bala Krishna

    > I am planning to use WMMBID02 for it.
    > Although I found in Std SAP it is available for inbound only but I feel we can generate this idoc using user exit available at the time of "material document posting".
    >
    If you find nearly all the fileds which are asked by ur partner in that idoc, thats fine.
    > my second query is , in this idoc along with other information we also have to send information related to "REASON CODE" and "To Stock Status" ( Like in case material is transferred from Blocked to unrestricted stock type and To Stock status will be Unrestricted ) but these fields are not available in idoc defination , what should I do ?
    >
    You can extend the idoc, if you still think that you are having enough fileds in standard idoc, which are usefull.
    Reddy

  • Tax code field under INVOICE Tab to be Mandatory for Inter Company PO

    Dear All,
    In MIRO  Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001.
    How do we set as mandatory fields for those two intercompany document types.
    Regards,
    Teja

    Hi
    If u want to maintain tax code as mandatory field in PO?
    Then SPRO- SAP IMG- MM- Purchasing - Purchase order- Define document types
    In this check the filed selection key for the document types.
    Then select the SPRO- SAP IMG- MM- Purchasing - Purchase order- Define svreen lay out at document level.
    In this for the field selection key select GR/IR control and click on tax as required. and then save
    It will not allow to create PO with out maintaoning tax code.
    If u want to do tax code as mandatory in MIRO
    Then Go to OLMRLIST and make changes accordingly.
    Thanks
    Raman

  • Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C

    I want to handle Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C. I know that SAP has provided standard solutions in 4.7C by giving one standard table OIH09 which can be maintained through Customisation.
    In 4.6C, even the Goods issue & Goods receipt button in item details of Stock Transport order is not available.
    Is there any work around for the same.

    In IS-OIL, cross company postings were stopped with Note #  623910 & would
    require a core modification to achieve this functionality.

  • Asking to maintain a valid document type for inter company

    Hi friends
    We have created a purchase order. It is STO inter-Co
    There is no issue for a normal vendor when posting in MIGO; the error is just for inter-company vendors.
    When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
    As per the error we have maintained the document types in OBA7 and the inter company posting are checked for the document types.
    Can anyone help me on this issue how to proceed?

    hI SUKANYA
    PLS EXPLAIN ME WHILE GL A/C CREATION FOR WE ASSIGNED G067 AND READY FOR A/C INPUT IS FOR WHAT
    CAN U PLS EXPLAIN ITS USES . MEE ANSWER KOSAM WAIT CHESTUNTAA
    THANKS
    MALLIKARJUNA

  • Asking to use a valid document type for inter company

    Hi friends
    We have created a purchase order. It is STO inter-Co
    There is no issue for a normal vendor when posting; the error is just for inter-company vendors.
    When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
    Can anyone help me on this issue?

    Hi
    This problem raised If the trading partner assigned in the Vendor master in Control data and that trading partner is different fromt the trading partner assigned to particualr Co code.
    Goto TCODE:OBA7 , selec the document type for which this error is coming - in the document type screen in control postings sections select the inter-company postings check box.
    VVR

  • Using AR Invoice but for Inter-company but with Workflow Approvals

    My client is using AR invoices (FV70) for inter-company transactions for other businesses that are not yet on ECC.  They also utilize workflow for their normal manual journal entries which can go through up to 4 approval paths one of the latter which requires an inter-company approval.  Does it make sense for inter-company transactions that will begin with the AR invoice to go through the same approval paths from the beginning similar to how they wish to do it for regular journal postings (FV50)?

    If the location of the companies is the same then Approval Paths does not make sense, however depending upon location changes and more importantly if their are different indirect tax liabilities on the two participating companies then the system might be required.
    Regards,
    Akhileshwar K

  • NB type PO for inter company sales for a service item

    Hi,
    I need to create the above PO for a service item (which will not pass through the delivery process). But I do need the A/R and A/P in both the books as this is an inter company scenario. How can such a PO get invoiced directly w/o the delivery? The material is a service material (DIEN). What are the necessary configurations that need to be in place to complete this process?
    Thanks!

    Hi
    1. Define Business Area.
    Got to IMG-> Enterprise structure->Definition-> Financial accounting->Maintain Business Area.
    2. Assign Business Area
    IMG -> Enterprise Structure -> Assignment -> Sales & Distribution -> Business Area Account Assignment >  Assign Business Area to Plant and Division or Assign Business Area by Sales Area.
    [Business Area|http://www.sap-basis-abap.com/sapfi003.htm]
    [Business Area|http://www.sapstudymaterials.com/2007/12/mm-configuration-assign-business-area.html]
    Regards

  • What are the questions they  will  ask for inter company sales?

    hi all gurus,
    pls. let me know the process of inter  company sales and the questions can
    ask in the interview.
    thanks all
    arun

    Hi Arun,
    Plz check these links which have most FAQs and interview questions on SD.
    http://storage-search-swicki.eurekster.com/SAPSDfaq/
    http://www.sapfans.com/sapfans/sapfaq/faqsd.htm
    http://www.sap-img.com/sap-sd/important-tips-for-interview-for-sap-sd.htm
    http://www.sap-img.com/sap-sd/sap-sd-interview-questions.htm
    http://www.sap-img.com/sap-sd/interview-questions-and-answers-on-sap-sd.htm
    http://www.sap-img.com/sap-sd/some-sap-sd-interview-questions-1.htm
    http://www.sap-img.com/sap-sd/some-sap-sd-interview-questions-2.htm
    http://www.sap-img.com/sap-sd/sd-questions-on-corporate-structure.htm
    http://www.sap-img.com/sap-sd/short-sap-sd-questions-1.htm
    http://www.sap-img.com/sap-sd/short-sap-sd-questions-2.htm
    http://www.sap-img.com/sap-sd/short-sap-sd-questions-3.htm
    http://www.sap-img.com/sap-sd/sd-faq.htm
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    http://www.sap-img.com/sap-sd/why-do-we-assign-division-to-sales-organisation.htm
    Plz mark helpful answers and close the thread once it is solved/answered.
    Thanks,
    Vinay

  • Credit memo for Inter-company billing

    Hi
    We are trying to create a credit memo with reference to an inter company billing document. The business requirement is to create a credit memo  to adjust the invoice value due to wrong value posted in the original inter-company invoice. Hence we do not want to use the sales returns route for this.
    So, we are trying to create a credit memo request (ZCR) in VA01 with reference to the Inter company billing document (ZIV). We have maintained the copy control between ZCR and ZIV.
    However, when creating a credit memo request (ZCR) with respect to the intercompany billing document, we get the below error in the sales order.
    "Item category ZNLC is not defined" and "Check Item copy" with Message No: V1324.
    ZNLC is the item category that we used in the intercompany delivery document.
    We are able to ignore this message in sales order screen and save the credit memo request in VA01 and also create credit memo (ZG2) in VF01.
    Pl provide your inputs on whether we are missing any other configuration.
    Regards,
    John

    Hi
    I have maintained the item level copy control settings as below.
    In the copy control (VTAF) between ZCR (Credit memo request) and ZIV (Inter company billing) at the item level for ZNLC (Inter company item category coming source document), the following setup has been maintained
    Copying requirements : 303
    Copy schedule lines : Blank
    Pos / neg qty : Blank
    Pricing type : D
    Update doc flow : X
    Do not copy batch : blank
    Pl let me know if there are any other settings to be done in config.
    Thanks,
    John

  • How to prevent GRN manually for Inter Company PO?

    Hi Experts,
    We have Inter Company purchase process for which, sales order is created through IDoc in the backend on creation of Inter Company PO in SRM.  By processing the sales order, outbound delivery is created and thereby inbound delivery and based on it, GRN is posted automatically by a job run.
    The PO won't allow GRN manually beforehand but once if a partial delivery is done, then the PO allows doing further GRN manually.  The business requirement is not to allow this even.  How this can be achieved?
    Can you please share your ideas?
    Thanks in advance
    Edited by: Ganesh Bitra on Nov 12, 2008 10:26 AM

    Thanks for your feedback Narendra,
    I have thought of that solution (using customer exit at save), but hoping maybe there was a setting in Customicing eather in CO or in PM to make message CJ066 appear. When looking at the source code it looks tlike there is a setting in customizing to be triggered, but I cannot find out where..
    BR
    Ellen
    Edited by: Ellen Ødegaard on Apr 29, 2008 2:08 PM

Maybe you are looking for

  • Syntax for using a variable in an equation.

    Hi all, Simple question here.  What is tha appropriate syntax for using a variable in a calculation equation.  Specifically, I am taking an established curve fitting equation from my channels and trying to calculate it over a lineargenerated data set

  • How to Handle RMA Requests through EDI?

    Hi Folks, I have a quick question. In general, how do RMA Requests are handled through EDI. I don't want RMA requests created in SAP (through VA01) send via EDI. How can i handle this situation. Please reply in detail. Awaiting for your answer, Creas

  • Uninstall earlier versions

    I am installing the CC apps.  I plan to keep the CS6 apps for the time being, but I have older (CS5 and CS4) apps on my Windows 7 64-bit machine.  I want to uninstall the older apps, but they don't appear in the Programs and Features section of Contr

  • Can you create or fake a Hierarchical Lists in Forms?

    I am interested in creating something like this on a form. Any general help in creating or faking a Hierarchical list in Acrobat forms would greatly be appreciated. Thanks

  • LAYOUT.JS error

    hi all, Did you ever face the layout.js "error".while working with OATS,If yes What is it? Edited by: USoni on Jan 14, 2009 8:16 PM