Sales order and linked with BSX account key?

Respected Members,
  I am creationg a purchase order with account assignment category M.
Suppose i have given material ABC and in material master of ABC i have maintain the valuation class 3000.
Now in details of account assignment category i have given the account modification VKA and consumption V and special stock E.
This VKA i have embedded in the GBB in the tcode OBYC and with the valuation class 3000 i have given the GL account
400210 ie consumption account.
Now this account is visible in purchase order as soon as i give the account assignment category and material.
Now secondly when i am giving sales order no in then it is replacing the consumption gl account with inventory gl account.
This inventory gl account is mentioned in the account key
BSX with the same valuation class 3000.
Now the doubt is that how from the sales order it is reaching to account key BSX .kindly explain me this background flow and settings.
I have also brief knowledge about the Requirement type and the requirement class.
Thanks a lot please give me the solution as soon as possible.
Thanks a lot.

Hi,
Here is the explanation.
Account determination of valuated sales order stock and project stock                                                               
Note that for valuated sales order stock and project stock (special 
stock E and Q) and for the transaction/event keys BSX and GBB, you  
must maintain an account determination to avoid receiving warning   
messages when entering data (purchase order or transfer posting) for
valuated stock.                                                     
During data entry, the system attempts to execute a provisional     
account determination for GBB for valuated stock. The system will   
only replace the provisional account determination for GBB with the 
correct account determination for the stock account (BSX), in the   
background, if you enter the data for valuated stock at a later     
point in time.             
Hence if there is an entry in BSX then system replaces the GBB with BSX.
Thanks
Krishna.

Similar Messages

  • Sales order cost estimate with GIT account

    Hi,
    Business introduced Goods - in - Transit (Balance sheet account), so PGI will always post to GIT and Invoice it will get reversed.
    For one of the Configuratble material (MTO) scenario we need the Sales order cost estimate to get the Planned cost.
    When i try to execute the sales order cost estimate it says cost element doesnot exist for GIT GL (WHich is right).
    But with maintaining the GIT how to achieve the sales order cost estimate.
    I tried to create CE category 90 for GIT, in Cost estimate am getting error CE 90 not supported for Cost estimate.
    Kindly help this is kind of urgent req for us
    Thanks,
    Sudha

    Hello Ashley
    Yes, if you have done your settings correctly, especially Requirements class set up  (see the documentation link),  then the cost estimate will flow to a condition type in Pricing, usually EK01/EK02 conditions. These conditions are used to calculate sales prices (PR00) in cost-plus (mark-up) scenarios.
    Link: http://help.sap.com/erp2005_ehp_04/helpdata/EN/90/ba6da4446711d189420000e829fbbd/frameset.htm
    However Profit margin  as calculated in a sales order comes from VPRS condition  (which is based in Material Master) and is the difference of net value and VPRS condition value in normal circumstance.
    Hope other more knowledgeable experts will weigh in.

  • Urgent Request! FM to link deleted sales order and accounting doc

    Hi there,
    I have this scenario:
    -I create a sales order and make a certain amount of downpayment.
    -At the save of the order, an accounting document is created in BSEG table with reference to this order (BSEG-VBEL2).
    -I delete the order that I created in step 1.
    -The accounting document still exists in BSEG.
    Question:
    A direct select on BSEG with vbel2, takes a very long time.
    ie. SELECT SINGLE belnr gjahr wrbtr pswsl saknr FROM bseg
        INTO CORRESPONDING FIELDS OF ls_bseg
        WHERE vbel2 EQ ls_event_sale_del-vbeln.        "#EC CI_NOFIELD
    Can anyone suggest a way to improve the performance, or does anyone know of a Fuction Module that I can use?
    Thanks,
    Deepti

    Arghhhh! You are right.
    I would do it like this. Find the document in the BSEG table. Then check it in the BKPF table - there are headers for posting documents. Write down the ATWYP field's value and check the AWKEY value (probably it will be the Order's number).
    Then you can search for the posting document in the BKPF table using the AWTYP and AWKEY fields. There is an index on these fields so it should go quite fast.
    Rgds
    Mat

  • FM for linking deleted sales order and accounting document

    Hi there,
    I have this scenario:
    -I create a sales order and make a certain amount of downpayment.
    -At the save of the order, an accounting document is created in BSEG table with reference to this order (BSEG-VBEL2).
    -I delete the order that I created in step 1.
    -The accounting document still exists in BSEG.
    Question:
    A direct select on BSEG with vbel2, takes a very long time.
    Can anyone suggest a way to improve the performance, or does anyone know of a Fuction Module that I can use?
    Thanks,
    Deepti

    Hi,
    Con't you use alternative table, Example insted BSEG use BSID and create a index on VBEL2 to improve the performance..
    Regards,
    Srinivasa M

  • Link tables of Sales Order and Purchase Requisition

    Hi,
    thru which tables we can get the data of purchase requistion for a sales order.
    regards,
    balu

    Dear Balu,
    the fields VBEP-BANFN and VBEP-BNFPO are filled in the third-party process only. It means that there is 1:1 connection between the schedule line of the sales order and the purchase requisition. In the third-party process during saving the sales order the purchase requisition is created automatically and is linked to the order.
    If the fields are empty, it means, you have no third-party process and no 1:1 connection between the sales order and the purchase requisition. Probably the sales order created normal requirements, which generate purchase requisition(s) after MRP run. In this case you cannot see the purchase requisition from the sales order as there is no 1:1 connection. You have no chance to get the data from sales order to the purchase requisition.
    The only possibility which you (may be, it depends on the process) have, is to find sales order numbers from the purchase requisition: so to develop the process backwards. These data are stored in the database table EBKN: Purchase Requisition Account Assignment.
    Please use the following fields:
    EBKN-BANFN  - Purchase requisition number (key field)
    EBKN-BNFPO  - Item number of purchase requisition (key field)
    EBKN-LOEKZ  - Deletion indicator in purchasing document (key field, can be helpful)
    The corresponding sales orders are stored in:
    EBKN-VBELN  - Sales Document Number
    EBKN-VBELP  - Sales Document Item
    EBKN-VETEN  - Schedule line number
    I hope, this information will help you further and will solve your problem.
    Kind regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • Link Sales Order and PO and Pick & Pack

    Ability to add a manual Link between a Sales Order and Purchase order to reserve the item(s).
    Also do not allow Pick & Pack manager to create pick list for sales orders with an earlier date if other sales orders exists waiting for complete shipment.

    HI,
    WE can use the table VBKD (SALES DOCUMENT: BUSINESS DATA )
    1.  VBELN - Sales order
    2.  BSTKD - Customer Purchase order
    we can link these two fields and can pass the data in a internal table after that Vbeln is also present in
    Tables VBAP ( SALE DOCUMENT ITEM DATA )
    1. VBELN - SALE ORDER
    2. MATNR - MATERIAL NUMBER
    3. KWMENG - ORDER QUANTITY
    which could be used for further procssing
    Thanks
    Rajat

  • Really Urgent: Problem in making link b/w sales order and production order

    Hi,
    I am trying to make link b/w the sales order delivery(VL03) by taking its Batch Number(LIPS- Delivery table) and linking with AFPO(Production order Table) field (batch no) so that i can see the fruther operations done o dat production order made against sales order,but it is not coming .
    I want to have help which allows me to make link b/w delivery (vf03) and the productiona order.
    plzz help me out it is really urgent.
    Edited by: ric .s on Apr 11, 2008 7:43 AM
    Edited by: ric .s on Apr 11, 2008 7:59 AM
    Edited by: ric .s on Apr 11, 2008 9:23 AM

    You have delivery no(VBELN) & itam no (Posnr)from lips table.
    Now
    1. go to VBFA table end get the corresponding sales oredr no and order item no.
    In VBFA table pass the delivery no in VBELN and delivery item in POSNN and 'J' in VBTYP_N and 'C' in VBTYP_V.
    Now VBELV & POSNV will return the sales order no and sales order item.
    2. Got to VBAP table and get the corresponding AUFNR to the order no and item no.
    3. Now with that AUFNR you will get a connection with AFPO(Production order Table.

  • Link between sales order and purchase order

    plz explain the link between the sales order and purchase request

    Hi Javed,
    Their are 2 scenario for this.
    1) You create a sales order and the system automatically creates a PR and then you convert to PO.This is third party sales.In PO account assignment the sales order number is directly copied to the PR And PO.
    2) You create a PO wrt to SO .The goods received will be reserved for that SO. third party PO Vendor will directly deliver the goods to customer.The delivery address is copied from sales order.
    Techincally
    EKKN table you have sales order and Item fields (VBELN and POSNR)
    using these fields search for the deliveries in LIPS table
    EKKN-VBELN = LIPS-VGBEL and
    EKKN-POSNR = LIPS-VGPOS
    Edited by: Raj on Jun 19, 2008 6:58 PM

  • Opening and closing stock with sales order and with out sales order

    hello,
    any body please help me my client want to check opening stock and and closing stock in areport.
    material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
    this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
    please guide me to get this report.
    Thanks & Regads
    Bhakta

    Transaction MB5B
    For sales order related use specila stock as E and use radio button indicator in stock type
    For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
    to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
    See the o/p which will give the stock as required by you

  • How to know the excess stock with in a sales order and line item

    Hi,
          i am running an MRP against a sales order and sales order line item. the materials are getting planned based on the requirement. but due to some reasons the production orders are confirmed with out consumption of the actual required quantity of the  components. so the stock  is kept  ideal in the sales order  though it is not required further.
       do to some othere reasons also the excess stock of componenets exist. the PR or POs may also exist for the materials though they are not required further.
    i am in need of a report for the excess stock or excess PR or Purchase order for a sales order.
      please give me logic to find the excess things in that sales order and sales order line item. the Expensional message 26 is there in stock requirement list . but it does not give the excess quantity existing.
    regards
    madan

    hi rajesh,
      thanks for your reply. please tell me the logic to see when only partial quantity of sale sorder are delivered  and also when no delivery is made also.
    but manufactured and placed in stock.
    please tell me the tables to follow and logic of going ahead with them.
    regards
    madan

  • Collected ATO Model & items with sales orders and forcast not in ASCP plan

    PTO/ATO/ATP challenged - need some help understanding this and how it should work or if it can work.
    On 11.5.10.2, a customer wants to see the ATO model and options in the ASCP plan
    when the ATO configuration item is not created in the Sales Order.
    Using the BOMN example below level 2 - ATO item and level 4 - Marketing Code (Forecast at this level)
    ALTIX-4700-PTO-Z level 1 PTO Model
    ALTIX-4700-ATO-Z level 2 ATO model
    --ALTIX4700-SYS-Z        level 3
    LST-IRU-Z level 4 Ordered item
    LST-4700-WC-Z level 4 Ordered item
    LST-IRU-WC-SRACK-Z level 4 Ordered item
    They are not seeing level 4 items in the plan even though they have Sales Order Demand and forecast at this level.
    They see the items in the collection workbench, but they are missing in the ASCP plan.
    Any ideas will be appreciated.
    Thanks.
    Edited by: Bob Marchant on Oct 16, 2008 12:02 PM

    Are you able to book an order on sales order work bench with same configuartion?

  • Problem with sales order and Service order

    Dear Guru's
    We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
    Thanks and Regards,
    Deethya.

    CLOSED

  • DMS Link witlh Sales order and Material master

    Hi, all
    here is my?
    Can we link DMS to both sales order and material master, for service feedback of a product from customer.
    rgds
    ben

    hi
    you can link the objects through object link in dms.
    go to  tcode dc10 select the documnet type, click on define object link. click on new entry, select VBAP object for sales order and MARA for material master.
    thanks ,
    regards,
    nitin
    award point if useful

  • Find Sales orders or Deliveries with the reference of Credit account

    Find Sales orders or Deliveries with the reference of Credit account
    Edited by: aqeeliqbal2008 on Feb 28, 2012 8:48 PM

    Hello,
    I doubt Material & Quantities will not be avaialbe in any SAP Standard Report for Credit Account.
    I feel you will have to go for a Z-Report Development for your requirement.
    Thanks,
    Jignesh Mehta

  • Regarding creating a LOOSE LINK between Sales Order and Vehicle

    Hi,
    Does anyone has any idea on how to establish a LOOSE LINK between Sales Order and Vehicle using BAPI_VEHICLE_CREATE or any other Function module.
    Any help will be highly appreciated and rewarded.
    Kind Regards,
    Tanuja

    Dear Kumar,
    Strategy - 40
    Consumption of PIR (not Redution)
    1) the first point in strategy in 40 is, incoming sales order consumes PIR
    2 )both sales order and PIR takes place in MRP planning run
    2) this is where it is in mostly used in many indutries
    just a small example how this strategy works
    1) creat PIR for ur FERT- 100Nos
    2) check in MD04- u will get PIR (VSF) as 100
    3) now creat sales order for 120 for same month
    4 )run MRP for that particular FERT
    5) check the result in MD04, here ur PIR gets vanishied and an plan order will be generated for 120 Nos.
    Regards
    kumar
    Edited by: kumar kumar on Jul 22, 2009 8:29 AM

Maybe you are looking for

  • Late 2007 15" MBP Very slow after upgrading to Mavericks

    Hi guys, this is my first post here. I look forward to learn and help others. The reason of this post is, as outlined in the title, slow paerformance of my computer after upgrading to Mavericks. It was kinda slow from before but this time it's almost

  • Using a wireless print server... help!

    Hi. I have a G5 on a wireless network using a LinkSys WRT-54G router. I just got a wireless print server (D-Link DPR-1260) and want to network my HP 6110xi All-in-one printer. 6110 drivers are installed, and printer previously worked fine when connec

  • Lossless edit in iPhoto 08

    In some of my photo editing in iPhoto 06 i enjoyed the ability to mess with images by repeatedly applying some of the effects to images until they got a painterly aspect to them. With the new improvement of lossless editing in 08 this process has bec

  • Trying to disconnect Xfinity Home Security - been on hold for 90 minutes.

    I recently signed up for Xfinity Home Security, and the service has not worked well at all.  We have had technicians out to our house multiple times.  Also, I get errors all the time when trying to arm the system from my cell phone.  Additionally, it

  • Writing an extension

    Dear Friends, I want to write an extension for Adobe Dreamweaver CS3 and also add an autocompletion-feature. Is there a good tutorial for adding autocompletion? I only want to know how to create a popup with custom listed textual content when the use