Sales order item quantity update based on goods issue quantity

Could any one explain me how to achieve the below functionality in SAP.
Sales order item quantity needs to be updated based on the goods issue quantity when goods issue happens.
Tried to achieve the above functionality thru user exit. But I could not found any user exit. Could any one help me in finding out the user exit for a delivery which gets triggered when goods issue happens?
Or is there any other way thru which we can achieve the above functionality? For example by using copy control, or requirement stuff.
Your inputs are highly appreciated.
Thanks in advance.

I dont y u got such type 0f requirement.Do one thing find out BADI it should be activated only when we are going PGI , in that badi try to chage Sales order <b>BAPI_SALESORDER_CHANGE</b>.
for BADI search in SPRO / Se80.
Regards
Prabhu

Similar Messages

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

Sales order item level deliveryblock based on the material's destin country

Hi Experts
I have a requirement to set delivery block to an order at the item level based on of country of destination and material.
-Requirement is to block automatically order line when a material is not authorized (Regulatory affair) to be shipped to the country.
-We need to allow only authorized person to have ability to remove the block-How can this be set up?
- Delivery block like these are usually set up for sales org & material (and not country level), the issue here is different countries in same sales org.
Awaiting for earliest comments
Thanks
Banu

Hi,
In standard SAP you can not have delivery block at the item level based on the country of destination. Because contry of destination comes from Ship to party master data and material master is not based on the country.
You need to have development or Exit and Z table. You need to maintain the list of materials allowed to various countries in the Ztable. Exit/development needs to check the table at the time of saving the sales order, 'If there is no table entry, delevery block needs to be maintained on the particular item shipping tab.
Further you can discuss with your technical consultant about the logic and the possibilities.
Regards,
Ravi Duggirala

Sales order item data

Hi Experts,
Let me know the table in which the APPR column data of sales order item is updating.
Thanks in advance.
Thanks,
K.Rajesh.

Hi,
You can ask your SD consulants for help. They are much familar with the SD tables.
Regards,
Chris Gu

Free goods determined in Delivery over Order Quantity in Sales Order Item

Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya Lalitnorasate

Dear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization?

Idoc segment for updating Sales order item dates

Hi All,
I would ike to update the sales order item dates (loading date, Goods Issuance date etc) from an IDOC.
please let me know the Idoc segment and fields that need to be filled in?
Thanks in advance.
Regards,
Zeeshan.

Hi,
Here are some details of the segments in the idocs -
SEGNAM Segment Name E1EDL20
VBELN Sales and Distribution Documen 180001539
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PIC : Picking with flow records (inbound)
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PGI : Post delivery goods issue (inbound)
SEGNAM Segment Name E1EDT13
QUALF IDOC Qualifier: Date (Delivery 010 : Picking
NTANF Constraint for activity start 20090808
ISDD Actual start: Execution (date) 20090808
SEGNAM Segment Name E1EDL24
POSNR Item number of the SD document 10
MATNR Material Number 1112
WERKS Plant SG01
KDMAT Material belonging to the cust 1112
LFIMG Actual quantity delivered (in 55
VRKME Sales unit EA
POSEX External item number 10
ORMNG Original Quantity of Delivery 55
SEGNAM Segment Name E1EDL41
QUALI Qualifier for Reference Data o 001 : Purchase order data of customer
BSTNR Customer purchase order number 4500004668
BSTDT Customer purchase order date 10
POSEX Item Number of the Underlying 10
SEGNAM Segment Name E1EDL37
Regards,
Shamma

Reg Open sales order item and the quantity

Hi experts:
I am getting open sales order item based on inner join of tables(vbak, vbap, vbep). Not using vbbe table in inner join as it doesnt carry all pending open records.
can any one say how open sales order items and their quantity can be retrieved?
I searched forum and saw usage of vbuk and vbup tables, but it does not accomplish our scenario.
Thanks in advance,
Sashti.

Hi,
1) fetch the header information from VBAK table.
2) Based on VBAK table fetch all the line items from VBAP table.
3) Now fetch from VBFA table.
*-Fetch from VBFA to get the delivered qty
SELECT vbelv               " Preceding sales and distribution document
         posnv               " Preceding item of an SD document
         rfmng               " Referenced quantity in base UOM
    FROM vbfa
    INTO TABLE lt_vbfa
     WHERE vbelv   = gv_vbeln
       and vbtyp_n = 'J'.
4) By comparing VBFA-POSNR just filter the records from the VBAP internal table. Remained lines are open lines of the sales order.
Regards,
~Satya

Sales order item quantity not rounded and allowing decimals with UoM EA

Hi gentlemens,
I noticed something strange in our SAP ERP system.
When we enter a material in a new sales order item, we are allowed to enter quantity 1,5 EA (1 and half Each).
But when I check the config of the UoM EA in table T006, the number of decimals (field DECAN) is 0 and the decimal place for rounding (field ANDEC) is also 0.
As far as I remember from other other SAP system, there should be an error message when entering the quantity 1,5 EA saying that decimals are not allowed for this unit of measure.
Can someone help and tell me wich error message or which rounding program should normally be active when entering decimals with uom EA ?
Thanks and regards,
BDT

Hi Mani,
Thanks for the thread reference. I found the related OSS notes yesterday evening but this was for procurement.
Here the question I have is more for a sales item.
The strange case we are facing is:
In a sales order, we can enter a particular material as a standalone item with a quantity of 1.5 EA without any problem.
But if we create the same new item as a sub-item of a previous one (filling UEPOS), with qty 1,5 EA, then a rounding is triggered by the system based on the T006 config.
I am wondering if this is a problem with the SAP standard program or if we did anything wrong in the past in our system?
Best regards,
BDT

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

Hi,
The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
Request your suggestions to avoid this error.
Thanks

>
anikaushi wrote:
> Hi,
> The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
>
> error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
>
>
> Thanks
Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
Please see the SDN thread for how you can avoid this error...
Re: Cancel Sale Order after Issued Billing

Cancel Confirmed Quantity in Sales Order Item (VA02)

Dear All,
I am having the following scenario :
Customer have created a Sales Order, item 10, schedule line 1 with quantity 120. The delivery date is 2011.12.22.
They have confirmed the quantity using the "Check Item Availability" function.
They have then changed the delivery date from 2011.12.22 to 2011.12.23. The problem arises that in the "Availability Overview", the system still show the confirmed quantity is on 2011.12.22. It doesn't release the confirmed quantity after we have changed the delivery date. And what is worst is the system is prompting me that no stock is available on 2011.12.23.
Does anybody knows how to release the confirmed quantity in the schedule line. I have tried in VA02 by modifying the schedule line details..... but does not work..
Thanks.

Hello,
One easiest way is to reject the line item and add a new line, make the delivery date as 23rd. Once you reject the line item the confirmed schedule line get reversed.
You can try with CO09 also.
Regards,
SAM

Update Purchase order number in Sales order item level from inbound ORDCHG iDoc

Hi Gurus,
I want to update purchase order number from the iDoc 'ORDCHG' to sales order item level (sold to party purchase order number) i.e, VBAK-BSTKD.
Which exit I need to use? where to update? Can you please help.
Thank you in advance.
Regards,
San

Finally Resolved the problem by writing 2 exits.
one exit 'EXIT_SAPLVEDB_007' for identify correct item in the sales order by updating the customer purchase order item number i.e., VBAP-POSEX. if we update the POSEX field then it wont create new item instead, it will update the item which it is referring to .
2nd exit for updating the purchase order number.
I have tried to pass the program name, screen number, field name, field value etc to bdcdata in the exit 'EXIT_SAPLVEDB_002'. but I observed that it is not going to that screen in the debugging.
when I try E1EDP02 with QUALF '044' it will update ship-to party's purchase order number. so to update ship-to party's purchase order number it is going to that screen.
so I have used that thing to update purchase order number in sold-to party's purchase order number.
so when it is going that screen iam changing the field name 'VBKD-BSTKD_E' to 'VBKD-BSTKD' in bdcdata. Then it is worked.
This is the solution I found in my time.
Any way it is solved. Hope it will be helpful for others who will get this problem.

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

How to block a sales order when there is a free good item .

Hello Gurus ,
How to block a sales order when there is a free good item , only the authorised person should have authorisation to release those blocked Sales orders.
Reason - They want to have a track of free goods given to customer & to avoid the misusing things
Looking for your inputs
Thanks in advance
Regards
Venkat

Hi
I think you can try with Status Profile in BS02 define and assign for item category TANN.
In status profile you can block the delivery and also billing unless some changes the object status as released.
Just try and explore
regards
Prashanth

FM for Updating Installation date in Contracts + sales orders Item level

Hi
Plesae give any FM for Updating Installation date in Contracts + sales orders Item level for contracts tab.
Thanks and Regards,
Vishnuvardhan....

Have used the billing transaction to set a Default Billing date at time of blling.

Sales order item quantity update based on goods issue quantity

Similar Messages

Maybe you are looking for