Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE

Hi Gurus,
I have this scenario.
1)Create sales order with 3 items.
2)Check in MD04. All items are there.
3)Assign reason for rejection for all the items.
4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
5)Only the first item can be shown in MD04.
Do you have any idea how can #5 happen?
Thanks and Best regards,
Andre

Thanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre

Similar Messages

  • "Hyperion" menu item does not appear in Excel after SmartView Installation

    Hi to all! When I first installed SmartView, everything was ok - "Hyperion" menu item appeared in Excel and I successfully established connection to Planning and worked with data in Excel. Then, once upon a time I happened to select all data through Ctrl+A in the data form open in Excel and tried to copy it to another worksheet in the same workbook, Excel threw out a message about some serious error and informed me that the Hyperion Add-on would be removed. So it was removed in fact. When I was reinstalling Smart-View, all the installation went smoothly but the "Hyperion" menu item did not appear in Excel again. I tried to reinstall both Excel and SmartView and rebooted the system several times but the Hyperion menu item still does not appear in Excel. Can anyone hint me on how to solve this? Thanks a lot in advance!

    Hi, John! Thanks a lot! Your link led me to the thread in which the last post had the link Re: Smart View errors in Excel?! containing the "low-tech" 's instructions. It was these instructions that pulled me from underwater! Thank you so much and to that guy too! :)

  • Need to create a sales order that does not create demand

    Hi,
    We need to create a no cost sales order - that does not create demand
    In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
    What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
    Thanks,
    SM

    Hello,
    For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
    Transfer of requirements / Begin assembly order from SD
    Availability check for sales
    Product allocation active
    Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
    Regards,
    Sarthak

  • Sales Order number is  not showing in MD04

    Hi Gurus  ,
    I have got one case where  Sales order number is not showing  in MD04 screen  . This sales order , line item  has already delivered , PGI &  billing document also been generated  . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen  because at  the time sales order creation  availability check “01” was maintained  which has sum up all the  requirement in one  particular day ( Also as
    per SAP note -70408) .
    Now because  all the subsequent document has been generated  for sales order so we can not mark it for “Rejection for rejection “  & to create new  sales order  with  availability check “02” in material master .
    Please let  me know the possible solution for the same or  if any  sap note would  be required to get the sales order number in MD04  .
    Thanks  ,
    Aman

    Hi Kiran ,
    Actually  before running the  report in “SDRQCR21”  in PRD I wanted to  run it in “Quality “ .
    In quality I am not able to simulate the same  .
    Please refer below points related to my testing result .
    1.Mainatined availability check group “01” .
    2 . Created Sales order 
    3. Check in MD04 screen & as expected  sales order  was coming blank  with negative Qty .
    4. Run the MRP which generated PR
    5. PR converted to PO  & GRN was done which updated the stock
    6. Created delivery  & checked the same in MD04  . It was also coming blank  . No delivery  document  numbe was showing in screen  but  it was coming with negative  Qty .
    7. Done the PGI  & blank  delivery document number  was removed & it become  normal .
    In PRD .
    There are 3 sales order
    One sales order is already marked reason for rejection & two sales order delivery , PGI has been done  .
    But still it is showing  blank sales order with negative Qty  & after MRP run it is generating the PR also  .
    I don't why it was  showing with negative values  .
    Please refer attacehed screen shot  .
    Thanks,
    Regards ,
    Aman

  • Sales order stock does not exists

    Dear All:
    I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

    Hi,
    Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
    GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
    If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
    Regards,
    Saju.s

  • Sales order stock does not exist error during PGI

    dear sir,
    we have two plants 1010 and 1020,we are using variant configuration for our finished goods
    we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
    so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
    but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
    if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
    how to resolve this
    thanks and regards
    srinivas pai

    There can be two reasons for these kind of error
    - Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
    - Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
    Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
    In either of the case, you have to again do the process.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Custom item does not appear on Hotsync Menu

    I have a Sprint Treo 700p.  My work email was converted to Outlook from GroupWise.  I am able to sync successfully, but received a message about changing profiles and conduits.  I tried to do this by clicking the Hotsync icon in system tray.  The menu that appeared only had three items (Settings, Install, Exit).  The CUSTOM item does not appear.  I am using Hotsync Manager 7.0.2.  How can I get back the CUSTOM menu item?
    Thanks in Advance,
    Corey
    Post relates to: Treo 700p (Sprint)

    Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
    To get to your Hotsync settings, click the Hotsync icon, and select Settings.  Then click Applications. Select the conduit you wish to change, and click Configure.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Sales order stock does not exist

    Hi All,
    In MTS scenario also while doeing PGI against a sales order/delivery the system is giving error prompt "sales order stock does not exist"
    What could be the reason? Pls suggest
    rgds

    hi
    goto MB1b here issue the raw material against the sales order no
    now do the PGI
    regards
    KI

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Sales Order item should not be allowed to modify after doing PGI.

    Dear all SAP experts,
    When i create a sales order say for 10 pieces. Now I have created the delivery for all the 10 pieces & also created the invoice.
    My requirement is when i create a delivery for all 10 pieces then after doing the PGI the system should make the sales order line item & qty "grey" - I should not be able to change the sales order item in any respects.
    If not from delivery then when i save the invoice for that sales order then I should not be able to modify the sales order item & qty.
    With best regards,
    Allabaqsh G. Patil

    Hi
    I think there can be a problem in copy control
    In copy control at item level, in teh item category, ensure that the field "Update document flow" and the Pos/neg quantity are properly updated.
    Update document flow shoudl be ticked on
    Pos/neg quantity should be positive.
    Before doing this , check teh document flow of the sales order. Do the same after doign this configuration. Note the difference.
    This will solve your problem

  • Ordered item is not showing in MD04

    Hello SAP Gurus,
    My requirement is like one material is in the sales order but dose not show as ordered in MD04.
    Could someone please help me on this.
    Thanks
    Sha

    Go to your sales order and note the schedule line category of the line item which you want to check
    In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box, If you tick that then this order for this line item will appear in MD04

  • GL Open Item does not appear in F-03

    Hi Friends,
    I am trying to clear the GL open items thru F-03, while I see all the open items that appear in Line item display through FBL3N (total 25), out of them only 24 appear in F-03, I can not see the 25th item.
    I have checked the document in BSIS table, it appears as open item there. The FBL3N also shows this open item.
    What could be the reason that when going for Clearing thru F-03, it does not appear.
    Best Regards
    VK

    - Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question - 
    BSIS-XOPVW = X      (Indicator: Open item management, only for G/L                     accounts)
    BSEG-XOPVW = X      (Indicator: Open item management)
    BSEG-AUGBL = space  (clearing document number)
    BSEG-DISBN = space  (discount document number)
    BKPF-BSTAT = space  (document status)
    BKPF-XSTOV = space  (indicator reversal flag)
    REGUS/REGUP -> see below
    - Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
    [Note 136754 - F-03, F-32, F-44, F-28 missing open items|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
    Rgds.

  • Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

    I am having a problem when creating a sale order using BAPI
    BAPI_SALESORDER_CREATEFROMDAT2
    Problem is that sale order item quantity field is not populating
    code is as follows
    ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
    ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
    ORDER_ITEMS_IN-TARGET_QU = 'LB'.
    ORDER_ITEMS_IN-TARGET_QTY = 1.

    Hi,
    Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
    Regds,
    Rudra

  • Sales order item quantity not rounded and allowing decimals with UoM EA

    Hi gentlemens,
    I noticed something strange in our SAP ERP system.
    When we enter a material in a new sales order item, we are allowed to enter quantity 1,5 EA (1 and half Each).
    But when I check the config of the UoM EA in table T006, the number of decimals (field DECAN) is 0 and the decimal place for rounding (field ANDEC) is also 0.
    As far as I remember from other other SAP system, there should be an error message when entering the quantity 1,5 EA saying that decimals are not allowed for this unit of measure.
    Can someone help and tell me wich error message or which rounding program should normally be active when entering decimals with uom EA ?
    Thanks and regards,
    BDT

    Hi Mani,
    Thanks for the thread reference. I found the related OSS notes yesterday evening but this was for procurement.
    Here the question I have is more for a sales item.
    The strange case we are facing is:
    In a sales order, we can enter a particular material as a standalone item with a quantity of 1.5 EA without any problem.
    But if we create the same new item as a sub-item of a previous one (filling UEPOS), with qty 1,5 EA, then a rounding is triggered by the system based on the T006 config.
    I am wondering if this is a problem with the SAP standard program or if we did anything wrong in the past in our system?
    Best regards,
    BDT

  • Why PO Item does not appear when return GR?

    Dear Gurus,
    The scenerio is,
    A standard PO with 30 items.
    The PO is released and complete received by MB01 103, 105.
    When return GR by MIGO GR 122, the PO items do not appear except one item. If use MB01, the same.
    Why? Pls advice. Thanks.
    Regards,
    David

    Just found a good OSS note: Note 886735 - MIGO: Unclear why GR is not possible for the purchase order
    It has a report attached, that helps to analyse the reason.
    Carry out the following checks using the report:
    1.  Check the document category
    Information: The document category 'F' is possible for purchase orders and the document category 'L' is possible for scheduling agreements.
    2.  Check that the purchase order/scheduling agreement is not deleted.
    3.  Check that the purchase order/scheduling agreement is not blocked.
    4.  Check whether the purchase order/scheduling agreement is released.
    5.  Check that the purchase order is not held.
    6.  Check whether the goods receipt is already posted.
    7.  Is there a purchase order for external service?
    8.  Is there a blanket purchase order?
    9.  Is there a text item?
    10. Is there a statistical item?
    11. Is the goods receipt indicator set in the purchase order/scheduling agreement?
    12. Check whether the confirmation control is active and whether a confirmation is still not available.
    13. Is there a valid scheduling agreement delivery schedule line?

Maybe you are looking for