Sales Order Mass Update - Credit Status

Hi
When we run mass update to sales orders, there are no changes to the value of sales order, but the credit status got changed from Approved to Not approved. Customer exposure total exceede the limite. Is there a way to stop the credit check for mass update?
Thanks.

Hi,
May be check the value of field KOMP-CMPRE in the sales order with net value.
Use report RFDKLI20 to correct existing incorrect documents. This program determines the credit account and the risk category from the current payer and executes corresponding credit checks.
Before you start report RFDKLI20, note the documentation in Note 408596.
Regards
Damu

Similar Messages

Material Account Assignment Group, in Sales Order Mass Update

Sd Experts,
We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
Your help will be greatly appreciated.

Hi
In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
Hope this is clear,please do a test run before.
Regards
Chandra

Sales order blocked for credit with status "Payment Terms"

Hi Experts,
Sales order is blocked for credit, as when i refer the t.code vkm3 or vkm1, the status of blocking showing as "Payment Term". Geenrally the status of credit block would be 'Old item', Dynamic check', value etc.
My question here is how the sales order is blocked with status "Payment Terms", and what is the role of payment terms in credit management.
regards
Vivek.

Hi Vivek,
The Standard Cr. management ( Automatic credit check) of SAP has Critical Fields Check - payment terms is one of them,
If it is being changed in sales order (other than maintained in Customer master) the sales order will go for credit block
Thanks
Dilip S

How to Avoid Open Sales Order Value from Credit Check

Hello Everyone,
We have a problem with Credit Management, When my user run the execute credit master sheet, system is considering open sales order value under Credit limit used. My user do not want consider open sales order value, they want only Open delivery and Open Billing value need to appear in Credit limit used.
Is it possible to avoid open sales order values, if yes what setting i need to do....please help me.
Thanks
Sudheer

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

Sales order released from Credit block, but Purchase Requistion not created

Hi,
In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
Here my scenario is
I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
There is no issue from security side, we activated trace and analysed everything it is not security issue.
Thanks and Regards
Alokam Chandra Sekhar

Hi Lakshmi,
Thanks for reply. I followed your instructions, pls find my observations below.
1. Can you check the below settings:
What is the Credit status in the header status tab page of the sales order for the B's sales order?
Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
Reply: Both the orders has same information, like material Item category and scheduline category
3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
Source list has been verified through ME03 transaction and vendor data maintained correctly.
I really appreciate your time and efforts on this.. looking forward some more suggestions...
Thanks and Regards
Alokam Chandra Sekhar

Sales Order Confirmation when sales order goes for Credit Block

want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block
How i can Achieve this?
Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is not getting confirmed.

I am not sure, why you want schedule line to be confirmed for credit blocked sales orders. Re-confirm with the client.
There are controls when defining delivery blocks.
Goto IMG - Log.Execution-Shipping - Deliveries- Define delivery blocks( check menu path in system, may not be same as shown here).
Select 01- credit block " untick" from "Confirmation" Column.
Now test with & see how ti works.
Regards,
Reazuddin MD

Add fields to Sales Order Mass Change selection screen

Hi,
Li & Fung customer customer needs to include following fields in the selection screen (Header Level) and the display output in Sales Order Mass Change (/AFS/MDC).
-     VBKD-BSTKD_E
-     VBKD-KDGRP
According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
Data selection part works perfectly, but if we do not enter any values in any custom field in the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
The system should display all custom fields values even if we did not input them as part of the selection screen
I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
thanks very Much.
Nilmini

Hi Nilmini,
In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
Regards,
Jelli

Is it possible to create a sales order in two credit control area

Hi,experts,
      I have a senario to realize. One customer has two sales area, and has two credit control area correspondingly. And this customer also has one common shared credit control area. I want to realize that one sales order would occupy two credit control area.
      common credit control area limit : 300
       credit control area A limit : 500
       credit control area B limit : 500
Now I have a sales order for this customer, net value is 400, the sales order will be blocked. Although it does not supass the credit control area A, but supass the common credit control area limit
How to realize this senario?
Thanks.

wayne,
Sales order has one credit control area, check VBAK-KKBER
Therefore order should be checked against this CCA.
TW

Which field shows me that, the Sales Order is under CREDIT BLOCK?

Hi Experts,
I know that, I can see weather the Sales Order is under Delivery block, by looking VBAK-LIFSK.
So, pls. let me know that, weather the Sales Order is under CREDIT BLOCK? which field, table telle me?
thanq

Hi,
Look for field CMGST in VBUK or
CRBLB check box in KNKK table.
thanks
Dan

How to cancel the sales order - header and line status are in Entered Stage

Dears,
I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
So it is not possible to book and cancel the lines.
Kindly me to resolve this.

926530 wrote:
Boss,
If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
How to cancel the sales order - header and line status are in Entered Stage
Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
unless until you have some processing constraints in place...which is stopping you...
HTH
Mahendra

Incoming orders in COPA not working if Sales Order blocked for Credit Check

Hi all,
We need to build a report showing all incoming sales order by entry date and/or change date (change of values or quantities later on). COPA allows to do this, but the problem is that COPA line item table is only updated if the sales order is released from credit check (VKM3). I am looking for a solution to be able to record sales orders in COPA even if they are still blocked for credit check. By doing that we will be able to report all sales orders entered from COPA and provide basis for commissions calculation to the business.
I have investigated possible COPA enhancements like COPA0005 but it doesn't seem to be used at the time of sales order save.
Thanks.

Hello ,
Thanks for the reply
As you said , the credit check in the service order is information message "Credit check (maximum percentage for ope
exceeded)" .
If you enter and come out this message then one more message will come , i.e., "The business transaction can not be carried out" detail message - System status CNOK is active (ORD XXXXXXX).
with the above message , system will not allow to do the Service order release.
In this particular case , we have done the VKM1 for the sales order to unblock the order from credit check . But again system is checking the credit check at service order (created w.r.t sales order) . we are not able to control this .
we also suggested the solution to the customer , saying removal of credit check for service orders . But customer requires credit check to happen at both the documents.

What can cause a sales order to have the status "To Be Costed"?

Dear Experts,
We are not very proficient in SD/FICO config and we are facing this problem. We are creating debit/credit note and after we saved, sometimes the system status becomes "To be costed". This prevents billing to be done.
Sometimes using the same data to create another debit/credit note, the issue does not occur.
We are not sure why the same data of the sales order created sometimes has that issue and sometimes it does not.
1) What are the factors that cause the status "To be costed" to be assigned to the sales order?
2) We don't want the status "To be costed" to appear. What can we do to do this at sales order type level?
3) We are suspecting might be because of the availability check. Does this affect the status as well?
If there is, we do not want to change the data for this material at material level. Is there a way to control by sales order type level? Thanks.
Regards,
Janet

Hi,
Please check if the material you are trying to invoice has the cost estimate released properly and which is updated in the material master as the planned price.
Good Luck!!!!!
Thanks and Regards,
Bhuvaneswari.S

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Excluding open sales order & Deliveries in Credit management

Hi All,
       I dont want to update all the open sales orders and deliveries in sales value in FD32. For this I have done the configuration and it is working fine. But after the configuration, system will delete the existing records in S066 & S067 and will not create records further even we create new sale order, del & inv.
Now I want to know wether there will be any problem if the records in S066 & S067 were deleted and will not be created further. And I also want to know wether the data in these infostructures (S066 & S067) were used anywhere in the system or not?
Kindly help me out in this.
Ratna

Hi,
    My requirement is while doing credit check system should consider only open invoices, not sales order or deliveries. For this I did the following.
    After running the program all my records in S066 & S067 will be deleted as I have deleted the update group under credit control area. Giving blank in update group under credit control area, will not update any open sales values or deliveries in FD32 for freshly created documents. But already there will be some existing open orders & del in the system which will show as sales value in FD32. This value will not be cleared for ever as there was no update group. So I want to clear these sales value in FD32. So I will run the program after deleting the update group and so the system will delete all the records in S066 & S067 and sales value will be zero in FD32 which is as per requirement.
Now I want to know will there be any problem by deleting this records. Wethere these records are anywhere used in the system other than FD32???
Kindly update
Ratna

Changing sales order for a Credit blocked customer

Hi Gurus
One of the requirement of my client is that they create sales order for a customer and deliver the goods. During sales order creation billing block is automatically applied. This block is removed by a batch job after the goods are delivered. Sometime credit department block the customer using FD32 (KNKK-CRBLB). Now when the batch job is run to remove the billing block the system will not allow it for that order as the system calls VA02 during that batch job run. When you process a sales order using VA02 for a customer which is blocked (KNKK-CRBLB) then system will through error message V1 (154) i.e Order receipt/delivery not possible, credit customer blocked.
So the batch job will not be able to remove the billing block from the order. NOw the requiremetn is that how can I achieve this so that the billing block are removed by that batch job as the customers has already been delivered the goods (Any user exit?).
Thanks
KTK

Dear KTK,
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Reward points if this helpful.
Regards,
Naveen.

Sales Order Mass Update - Credit Status

Similar Messages

Maybe you are looking for