Sales Order not transferring business partner function to GTS

We created a new Quality client and I am doing the necessary configuration to connect it with our GTS Quality client. We are running GTS 7.2.
To make it easier in the future I've decided to set up a Feeder System Group that we can add Quality clients to and not have to do a lot of configuration each time. Here are the steps I've done:
1. Created a new logical system for the new quality client
2. Created a new feeder system group
3. Assigned both the new feeder client and the quality GTS client to the feeder system group.
4. Assigned the company code and plants to the new feeder system group
5. Assigned the partner functions to the feeder system group
6. Assigned the sales document types and item categories to the feeder system group.
The new sales document is created and transferred to GTS. I then go in to display blocked documents and my new sales document shows up. When I check the log for why it is blocked I get the error "None of the partner functions to be checked are in the document". This error shows at the line item level for SPL.
When I look at the document that has been transferred to GTS in the Partner tab I see that the Partner was transferred by the field for the partner function is blank/empty. I believe this is what is causing my problem but I do not understand why that field is not transferring over.
I think I'm missing something in the configuration set up but I cannot figure out what.
Thank you for any help!
Tami

Hi Dave,
I found the logs in SLG1. I just ran it wide open without the objects and was able to find the information you are talking about. The error message it is reporting is "None of the partner functions to be checked are in the document." I looked at the embargo configuration and it's wanting to see these partner functions, AG, RE, RG, WE, EN, etc. I do have those partner functions mapped and I am using the German ones.
You said that you think there should be a warning telling me why the partner function is not transferring along with the partner. I'm not seeing that kind of warning, only the fact that the functions aren't in the document. This is more of a log telling me why the document is blocked.
Is there possibly another log other than SLG1 that would give me different information? A log showing the transfer of the doc from ECC to GTS?
Thanks.

Similar Messages

To Get the list of sales orders for a Business partner in CRM.

Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards.

Delivery & Sales order balance in Business partner master data

Hi Experts,
Why there is negligible balance showing under delivery & sales order balance in business partner data.
How can we remove this balance from master?
Regards,
Datta Kharat

Hi,
You need to check the detect query under the Note No. : 999124.
There are many similar threads discussing the same issue.
Kind Regards,
Jitin
SAP Business One Forum Team

Sales orders not transfered to R/3 sytem (error IAOM 034)

Hello,
When we try to send a sales order from CRM to R/3 an error appears in the CRM document and doesn't create the SO in R/3 system.
Error message:
An error has occured in the system WCD200 while copying the document
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission Log
Characteristics for Controlling object have errors (Notification E IAOM 034)
Company code is not defined (Notification E F5 165)
You must enter a company code for transaction (Notification E KI 180)
Company was not supplied in Function Module interface (Notification E FI 320)
Characteristics for Controlling object have errors (Notification E IAOM 034)
Can anyone help me with this issue.
Best Regards,
Alexandre Aires

Hi all,
I've already solve the problem:
The item category used in the sales document must be changed to External billing in the configuration of the billing relevance.
Best regards,
Alexandre Aires

How to set limit on sum of totals of all sales orders of a business partner in SAP B1

Hi,
I would like to set a limit on a business partner so that the sum of totals of all orders placed for that business partner do not exceed a certain amount. How can I do that?
Regards,
Victor

Hi,
Yes can set limit for Business partners. Follow the steps to achieve:
1. Choose "Credit limit" check box under Administration--->System Initialization--->General settings--->BP sub tab and choose sales order check box
2. Set credit limit for BP under Business partner master data--->Payments terms.
For complete information, you can refer SAP help file.
Thanks & Regards,
Nagarajan

How can i show sales order details for specific partner in view

Hi All,
My Requirement is that I want to display the sales order id,sataus,amount in sales order assignment block in Customer FACTSHEET. I created a new componnet and new view for Sales Order View using BTQRSlsOrd BOL Entity in ONEORDER I want to diplay sales order id ,status ,amount for specifc business partner which i selected from Account Tab in WEB UI.How can i bind my ( view or context node or context ) so that it shows details of sales order for specific business partner.
Thanks in Advance.......
Vishwas Sahu

Hi Vishwas
I hope the following link helps you in setting up the sales order in account fact sheet:
Add Sales Order to Account Factsheet
If you are on CRM 2007 SP03 then you might need the following note:
Note 1165224 - Search result is not showing up in IC account factsheet.
Regards
Rupesh

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

RE:Business partner functions in customer Master creation

Do we need to send the Business partner functions while creating record in R3 thru MDM.
For any account group i pass the Idoc is expecting all Business partner functions to be defined for the account group to which am trying to create Customer.(As SH,BP,PY..)
Can anyone please explain me in brief the Business partner function -Problem in my scenerio............................Concept of Business Partner function while creating Customer.

In ECC partner functions are used when you have multiple addresses for the same customer. The partner function links those address records together. You could have multiple unique customer numbers on the KNA1 table, but in the KNVVP table (partner functions) you maintain the linkage between the main table records.
Partner functions are not recommended in MDM. These are generally not considered to be "enterprise level attributes" and therefore shouldn't reside in your customer repository in a central create scenario. Additionally, some of the complexity required to model partner functions can't be modeled in MDM at this time. When 7.1 comes out, there is a new data type called "tuples" which supports deeply nested structures, and therefore you could model a true partner function table inside the sales area table.

In third party sales order process how business come to know that the vend

Hi SD Gurus,
In third party sales order process how business come to know that the vendor has delivery the goods to the customer?
Where Business will check whether Vendor has delivered the goods or not to the customer?
Thanks & Regards,
Nivas

Hi,
Process
VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
Kapil

Display Several Sales Orders from Same Business Customer TOGETHER in MD04

Hello
In MD04 is it possible to display several sales orders from same business customer together?
For instance one business customer order bikes for two times.
The Order-No are 12912(50st by 07/08/09) and 12913(100st by 10/08/09).
Normally after runnning of MRP(MD02), the planned orders are displayed seperately in MD04.
I want to display two orders together.
The reason is if some trouble happens in Production(for Ord-no 12912) and it cannot be deliveried on schedule, however Production (for Ord-no 12913) is going without trouble, the final-products for order 12913 should move for 12912.
If you have some good solutions, please share it.
Thank you for your advice.
Regards,

Hi Riyolshibashi,
Lets look at the two main scenarios, MTS and MTO.
In MTS, the general display filters are available in MD04. Standard SAP filters do not filter on 'customer'. I suspect this is because the concept would normally be illogical in a MTS environment. Planned orders do not exist to serve a customer, but to serve 'stock'. But let us not think about SAP and their logic.
SAP allows you to create customized filters, in IMG>Production>MRP>Evaluation>Filter>Define Display filter. Within this definition, under the "Addnl Selections' tab, you can tick 'Define addl selections in the transaction'. When you use this filter in MD04 display, then, one of the options available to you is to enter a specific Customer number, and then the display will only show the requirements from this customer. Since you have excluded all other customer's orders, all orders of a single customer will be displayed consecutively. Next to each other.
In the case of MTO, the 'filter-by-customer' concept makes more sense (although, not for the reason you have stated. You would have to find some manual method to convert a production order from supporting one sales order item, to supporting another sales order item. Possible but difficult). Anyway, the above mentioned customized filter would also work in an MTO environment.
Regards,
DB49

Use of business partner functionality in combination with dual control

Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
So is there a way to make this work or a procedure to do this?
Niels Vanwingh

Thanks Masa,
I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
Let me explain the requirement and scenario here in SRM 7.
We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
Is there any way we can achieve this?
In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
Regards
Sandeep

Error TTB1: You have not assigned business partner B1000 to a customer

Hi,
When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
Any recommandations on this? The BP functionality has never been used befor by my customer.
Thanks in advance, and this a week befor possible go live...
Hans.

Update in PS was needed...

Partner (vendor no.) does not exist for partner function LF

I am trying to trigger outbound i doc from PO messages, and im getting this message, also im just getting this for UB type order and not regular PO NB.
Partner 970023 does not exist for partner function LF
Message no. VN006
Diagnosis
Partner does not exist for the partner function selected for this
transaction.
Procedure
Check your input.

Hi Ankit,
Please check the Partner Tab in Header and see whether partners have been determined for the PO. If that is not determined, then check the customization settings in NAST.
You can also refer to SAP Notes 117537, 407600, 69492 and 459350.
Hope this helps.
With Best Regards
Srinivas

Partner does not exist for partner function LF

Hi gurus
while trying to print the output of a Purchase order thru ME22N, after selecting Print output, Output type as Purchase Order (NEU), and a partner, the system isues a arning message "Patner xxxx does not exist for partner function LF".
Can someone pls explain what does this imply?
Regards
Deepak

Hi
xxxx is just a string to show you the Warning Message that appeared. Actually it was a Partner that was missing for the Patner Function LF.
Regards
Deepak Prasanna S

I need help on Complete Sales Order Cycle using Business One

Hai,
Actually I am crating an external application using Business one DI API, Now I need a Complete Cycle of Sales Order Cycle from Sales Order Creation to Goods issues, goods receipt ,invoice generation , pick and pack etc
Anybody Please help me out on generating a Complete Sales Order Cycle using Business One GUI or theory by using Business One
Please help me out in this regard
with regards
Somaraju

Somaraju,
You may want to look at the Sample Code example that is part of the 2005A Business One SDK that shows and external Business One interface written in VB.Net that shows how to create a Sales Order/Invoice in SAP Business One. This example can be found at: Start > Programs > SAP Business One > SDK > Samples > COM DI > 05. OrderAndInvoice. For complete training on the processes you are asking about from within the SAP Business One product, you can reveiw the SAP Business One eLearning product training if you are and SAP Business One partner in the areas that you have outlined at service.sap.com/smb.
Hope that helps,
Eddy

Sales Order not transferring business partner function to GTS

Similar Messages

Maybe you are looking for