Sales order release date

Hii..experts...
I want to know the <b>recent order release date</b>..in which table this date has been updated...

Hi,
Check Field CMFRE in table VBAK.
Regards,
Samson Rodrigues.

Similar Messages

  • Sales order released from Credit block, but Purchase Requistion not created

    Hi,
    In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
    Here my scenario is
    I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
    There is no issue from security side, we activated trace and analysed everything it is not security issue.
    Thanks and Regards
    Alokam Chandra Sekhar

    Hi Lakshmi,
    Thanks for reply. I followed your instructions, pls find my observations below.
    1. Can you check the below settings:
    What is the Credit status in the header status tab page of the sales order for the B's sales order?
    Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
    Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
    2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
    Reply: Both the orders has same information, like material Item category and scheduline category
    3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
    Source list has been verified through ME03 transaction and vendor data maintained correctly.
    I really appreciate your time and efforts on this.. looking forward some more suggestions...
    Thanks and Regards
    Alokam Chandra Sekhar

  • Sales order availaibility date one day in past

    Hi Experts,
    I am facing an issue in SNP planning book / Product view wherein Sales order availability date is one day in past (say, date in ECC 01.04.2015 00:00 hrs --> date in APO 31.03.2015 23:00 hrs). This only happens for plants where DST is maintained. DST ends in March, and this issue is popping up for the sales orders in the subsequent month, i.e. April. The same error is also present in the next month of the DST starting month. The issue is not present in any other months.
    I guess this is due to some inconsistencies that has arisen in APO. I saw a previous thread, http://scn.sap.com/thread/1816822, but it has ended without any solution.
    Note, we are not using GATP.
    Thanks in Anticipation.
    Regards,
    Biplab

    Hi All,
    The issue is found to be because of application of note 198411 in ECC. Amongst others, variable DST has been introduced for time zone AUSWA (table TTZDV). But, Western Australia does not follow DST after 2008-09.
    Have any of you faced similar issue post the latest version of note 198411 (released on 9-Jul-2014)?
    Regards,
    Biplab

  • SALE ORDER COMPLETION DATE

    Hi all,
               We are create one sale order in va01N after completion of all process we make a delivery entry in VL01N.We are creat morethan five deliveries.
          Any standard report to see the sale orders completed date
    ie order closed date wise report.
    Regards,
    T.Murugu

    Hi
    You can use Acceptance field at Sales Order item to enter date on which final delivery is made.
    Based on that field, we can create a Z report lisitng Customer, Order Number, and Delivery Date (Maybe more fields based on the business scenario)
    Hope you find it useful.
    Reward points if you do.
    Regards
    Ravi

  • Sale Order additional data B.

    Hi,
    I have created 2 z fields in sale order additional data b at item level.
    but when user is entering any data in that field,same data is getting displayed for all line items.
    how to control that for particular item for which user has entered.
    Data Entered in z fields are used only for display purpose which are used for some calculations.

    hi,
    in PAI  usercommand  module  
    use loop endloop for internal table which store item level data 
    loop at item level data
    user command module 
    endloop.
    in module  driving program .
    module
    read table it_issue index tab_ctl-current_line transporting no fields.
      if sy-subrc = 0.
        it_issue-kostl = p_kostl.
        it_issue-ktext = p_ktext.
        it_issue-for_sys = p_for_sys.
        modify it_issue from it_issue index tab_ctl-current_line.
        clear it_issue.
      else.
        it_issue-kostl = p_kostl.
        it_issue-ktext = p_ktext.
        it_issue-for_sys = p_for_sys.
        append it_issue .
        clear it_issue.
      endif.
    endmodule  .
    regards
    deepak.

  • Sale order complection date

    Dear All
    which table stored in sale order complection date
    Thanks and Regards
    Suresh

    You can see the SO complete status in table VBUK-RFSTK filed.
    But i dont think you will get directly teh completion date. What you can do the check for the billing documents of the SO and take final billing doc creation date as SO completion date.
    Anyway plese check with your functional consultant.
    Thanks,

  • Sales orders flow - dates difference

    Dear All,
    I need to build a model for a report which needs to have the days difference between the sales order creation date, delivery date, goods issue date  and billing date. The lowest level of detail should be the Sales Order/Item and one Sales Order/Item can origin different Delivery Items.
    Base on this, i'm wondering how can i model this scenario...
    Do you have any suggestion?
    Thanks in advance and best regards,
    Nuno

    Hi,
    I need to build a model for a report which needs to have the days difference between the
    Sales order creation date,
    Delivery date,
    Goods issue date ,
    Billing date.
    In your question you didn't mension what differences you need
    Eg:
    Sales order creation date - Delivery date
    Goods issue date - Billing date
    Sales order creation date - Billing date
    Delivery date - Goods issue date
    Like what combination you need?.
    Steps:
    Bring all InfoObejcts into Cube and once youn have all required InfoObecjts in your cube then in reporting level you can play like any thing. So first bring all Dates data into Cube. Use 0SD_C03 InfoCube with relavent datasources.
    Then Use Formula Variables with Replacement pathes and then do simple Substractions at reporting level. Your problem is resolved.
    See the below Article how I'm calculating Age of teh Material. Here I'm using Custome Exit Variable to get teh System Data, but in your case you don't need it, you just use Formula Variable with Replcemet Path and replace with Date and then do Substartion.
    Calculating the Ageing of the Materials
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Thanks
    Reddy

  • Purchase Order released date field and table name

    Hi,
    Please tell me the  Purchase Order released date field and table name.
    Regards
    Deepak

    Hi,
    Table : EKKO.
    Fields : FRGKE,FRGZU.
    You can get release date of PO from CDHDR  table.
    give object value as your po number and check.dont forget to give leading zeros.
    The udate will be date field and transaction will be me29n for relaesed po.

  • Sales order item data & sales order schedule data

    Hello,
    I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
    Example of how the data looks now:
    Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10
    1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15
    2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
    How do I merge the data on the Sales Order number in the cube so it looks like below?
    Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000
    Many thanks,
    Matt

    > Hello,
    >
    > I have a Sales Orders cube which is pulling data from
    > two DSOs (one for sales order item data and the other
    > for sales order schedule data). The common fields
    > between these two DSOs is the Sales Order number but
    > in my cube I have dual entries for each Sales Order
    > document (item and schedule info).
    >
    Two previous remarks:
    1) If you need to report on very detailed data consider doing an info-set joining both datastores. 2 reasons why:
    - not a good idea to report on very detailed information (sales order, GI dates) on cube level, if you have a scenario with lots of data. You end up with big dimension tables a poor report times;
    - there are better alternatives, like drill-through from cube query to DS query with report to report interface or Datastore-based reporting...so...
    With this solution you do not need to change the data model, I think, but test to be sure. See if the reporting times are acceptable. If not...
    2) First confirm your requirements, because what you show in your example as "to-be" have details that do not make sense, probably..
    - if you have more that one schedule line for each item then you would have many times the item information like material/price;
    - if not or if you could cope with that, then you can consider:
    2.1) create a new DS that agregattes from the previous on, with the same key of sales order item; do you have schedule line kf's? if so you these KF's should be additive in DS update; But if you may have more one scheduled line for 1 item then you have to decide what to do with the GI data (keep the last one posted, use code..) and other characteristics.
    2.2) update the shedule line datasource to the sales order item DS; same comments apply.
    2.3) maintain the missing data in the cube update rules from sheduled lines DS. Using code, refer to the respective item in the order item ODS. You would have to make sure that DS's data are correctly activated before updating the infocube.
    What solutions to choose?
    2.1 is better in terms of flexibility and architecture...because you could re-arrange the new DS to answer future needs, without loosing the 1st line DS's data;
    2.2 choose if data volumes and disk space are a concern...
    or
    2.3 it's OK, but i do not like it because of what explained in point 1...
    Message was edited by:
            Miguel Costa

  • Sales order schedule date is a (working) day before Scheduled ship date

    In MRP/MPS planning, the forecast consumption is occuring for all sales orders at a date (sales order schedule date) which is always a working day before the Scheduled Ship Date (SSD). What is the logic?
    Time fences are not used.
    E.g. Sales order is scheduled to ship (SSD) on 30th Nov, in forecast set > Forecast items > Consumptiion > Detail, the sales order schedule date is a day before SSD.

    Hi,
    This is a complex issue; best solution is by using APO/GATP.
    If not, then in ERP only, the second best is:
    1) Work with assembly processing in SO, meaning that a production/planned order is automatically created in the customer order during order creation.
    2) Then, after the order is created it is scheduled, and the delivery date proposal is based on that.
    3) Now you can check in the order that there are no capacity overloads, and all capacity required to produce on the proposed date is available. If yes, you're done. If not, it gets a bit complex, since you actualy need to switch to capacity planning, do capacity leveling and dispatch (PP), and the you get a new feasible schedule proposal based on that.
    APO/GATP could do all that automatically!
    Regards,
    Mario

  • Sales Order Item Data & Sales Order Schedule Lines

    Hello,
    I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
    Example of how the data looks now:
    <b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . .  Act GI Date</b>
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10  
    1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15  
    2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
    How do I merge the data on the Sales Order number in the cube so it looks like below?
    <b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . .  Act GI Date</b>
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000 
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000  
    Many thanks,
    Matt

    Hi Matt,
        Its no possible If you are maintaining data at Order Level.
    Try to introduce one more ODS/DSO in between ODS's and CUBE by keeping Sales Order only key field. Load data from both DSO's in required fields only. Then PUSH delta to CUBE. In this why you can maintain 1 record. Try to compress cube(with delete Zero Record Rows) to delete unnessasary records.
    Hope it Helps
    Srini

  • How to fetch post goods issue date and sales order creation date

    Hi All,
    How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
    Please let me know the solution .
    Thanks in advance.

    Hi,
    Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
    after saving ur sales order...when u raise the Delivery using VL01n  w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
    You can the fetch the values using tables-  Use T code   SE12  or SE16
    Vbak-----order header
    Vbap-----order item
    Vbek-----order schedule line
    Likp-----Delivery header
    Lips----Delivery item

  • WMS :  How to Process Sales Order Released before Turning on WMS

    Hello Gurus,
    How to process sales orders released before WMS enable flag is turned on in the  new WMS enviournment in Oracle 11.5.10 ?

    Helios,
    Thanks for the document.
    I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
    One option is to close all the deliveries  but if there is no on hand at that point the they will remain option.
    Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items  and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
    Let me know if you can think off some alternative solution.
    Apprecite help !!
    Thanks,
    Sam

  • Control Sales order Pricing Date with Delivery GI Date

    Is it possible to have a control that ensures the Actual GI date in a delivery is not more than a number of days from the sales order pricing date?

    Hi,
    To have restriction in actual GI date in transaction VL01N . Please find the user exit for VL01N , you can use one which are marked as bold . Kindly take the help of abaper to put the validation or logic as required.
    V02V0001   - Sales area determination for stock transport order 
    V02V0002   - User exit for storage location determination 
    V02V0003   - User exit for gate + matl staging area determination 
    V02V0004   - User Exit for Staging Area Determination (Item) 
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    V50R0001    -  Collective processing for delivery creation 
    V50R0002    - Collective processing for delivery creation 
    V50R0004    - Calculation of Stock for POs for Shipping Due Date List
    V50S0001    - User Exits for Delivery Processing 
    V53C0001    - Rough workload calculation in time per item 
    V53C0002    - W&S: RWE enhancement - shipping material type/time slot
    V53W0001   - User exits for creating picking waves 
    VMDE0001  - Shipping Interface: Error Handling - Inbound IDoc 
    VMDE0002  - Shipping Interface: Message PICKSD (Picking, Outbound) 
    VMDE0003  - Shipping Interface: Message SDPICK (Picking, Inbound) 
    VMDE0004  - Shipping Interface: Message SDPACK (Packing, Inbound) 
    Hope this will help you to resolve your issue!!!!
    Regards,
    Krishna O

  • How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)

    Hi all
    I have a report on sales order item data, I have to reload it. DS 2LIS_11_VAITM
    Can any of you pls explain me the steps to do the INIT? Refill set up tables etc
    Many Thanks in advance
    Ishi

    Hi Hari
    Many Thanks for the explanation and steps. I deleted set up tables and executed to fill it.
    It says in R/3 Start of Processing, I ticked to continue and its still running.
    In the mean time I checked RSA3 and it says 1007 records selected. I am refreshing it and the no. of records are still the same.
    Can you tell me how long it takes to fill the table?
    And the R/3 system is still running (Start of Processing)
    Thanks again
    Ishi

Maybe you are looking for

  • File Specs for Animations into a 16:9 Sequence

    I captured mini dv footage shot in 16:9. I received graphics to cut into my sequence from a post house. These 5 second qt's crash my FCP. They are in the apple animation codec 853 x 480 (1024 x 480), Millions. To work around this I opened them in QT

  • Help Needed "Camera not asking to use photo location when switched on"

    Hey guys, any help would be greatly appreciated. When I turn on my camera app it used to ask if I wanted to use the location. Now it does not, I am interested in seeing what I can do with the geotagging feature. I checked my settings, and use locatio

  • Photoshop CC help needed urgently

    PLEASE HELP... I have recently joined Creative Cloud and have no problems using and of the applications, except Photoshop. The message – Could not initialize Photoshop the internal file signature is incorrect – appears when I try to open the applicat

  • Microsoft outlook connector error: no available message stores

    Any assistance out there on the 2010 MS OFFICE PRO - - upgraded from 2003 and having difficulties sync-ing the device. "Got a Microsoft Outlook Connector Error - - No Available Message Stores" Read a few post(s) and it appears that 2010 Office Pro wa

  • QuickTime movies in Keynote on MacBook Pro do not play

    On my iMac G5, all QuickTime movies play just fine in Keynote. When I transfer Keynote presentations to my MacBook Pro, many of the movies are virtually transparent. Those same movies play just fine in QuickTime on the Intel laptop. Any sugggestions?