BAPI_ACC_DOCUMENT_POST - Int.Order -E/KO/104/Order 400001234 does not exist

Hi Experts,
Am using BAPI_ACC_DOCUMENT_POST to post the docs, working fine, with populating min. fields in min. structures.
But, in some cases, am populating INTERNAL ORDER into ACCOUNTGL-ORDERID field, but, am getting an error, saying
E- KO-104--Order 400001234 does not exist
But, with the same input data, the FB50 is working!!!!!!!!!!!
So, pls. let me know How to fix it?
Is there any other field I hv to populate along with ACCOUNTGL-ORDERID, when am using INTERNAL ORDER?
thanq

Srinivas,
i am expecting the error might be converion problem. Please check for conversion routine for AUFNR(Internal Order) Field, before filling it to G/L Item table (before passing to Function module)
CONVERSION_EXIT_ALPHA_INPUT
CONVERSION_EXIT_ALPHA_OUTPUT
Some time back i have similar problem. it was solved after using converion routine before filling the G/L Item internal Table. this might be helpful for you
Thanks
Sekhar.

Similar Messages

GR for Order (MVT 101) - Error - Table entry does not exist

I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.

Hi
Please, kindly check the note 183647 - Error message M7001.
As indicated in it, please, maintain the customizing entry in transaction OPK9 for your valuation area and re-test the system behaviour afterwards.
Regards,
Mauro

Help! Order of photos in a Folder does not match order of albums

I have seen dozens of threads on folders and albums, sorting them etc. However did not quite find an answer to this one.
The question is : Why the order of photos in a Folder does not match with the order of Albums I have created underneath the Folder?
In other words I created a floder and placed within the folder a few albums we will call G, K, C ...etc in the chronological order in which I want to show the pictures. The pictures within the album are not strictly chronological. ( I will explain more if this is an issue)
Next when I click on the Folder, I notice that the photos are grouped by the corresponding Album which is what they should be, however their(photos) order did not correspond to that of the Albums. In other words, in the Folder view, I see photos of K first and then may be G and then may be C. I am not able to change that order to G, K, C..the way I want. This will mess up the slideshow for me.
For clarity, I created each album simply by dragging corresponding event down into the Folder. The events are sorted by date and ascending in View>Sort Events.
I appreciate any suggestions please!
Thanks

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset its preferences and try the slideshow again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
OT

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

Error message BP does not exist while creating service order in WEB UI

Hi Experts,
i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
we have already completed set up integration with HR .created the user as BP Role "employee"
Kindly suggest what are the other configuration that need to be checked.
Regards,
D Panda

Hi,
Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
Regards,
Parul

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Receiving Error in Shopping Cart : Order Does not exist

Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AM

Hi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Archieve does not exist for purchase order

Hello Gururs,
When i tried to change the delivery date for the PO and when i trying to save the PO
then it throws the error messages-'Archieve does not exist for purchase order'.
PO was created in feb.
Please help me how can i solve this issue.
BR
Ashish

Can you give a more detailed information.
What transaction you actually use, what you enter step by step until you get to the error: 'Archieve does not exist for purchase order'
This message sounds like you want change a PO which is already archived.
A change to an archived PO is not really logical, as you can only archive closed business cases. and if the business case is closed, then why would you change the delivery date.
A PO from February should not really be archived already in June. I never saw it in practice, as you could not do any anual reporting
I would assume further that SAP found the entered PO number in the archive index but did not find the way to the archive itself. This can happen if the archive file was deleted or moved manually.
I am not sure if the next messae has really anything to do with your purchase order, thats why I ask you to post the exact steps until the messages come up:
Le fichier archieve 000524-002SD_COND n'existe pas is the message discription
But even this message explains more or less the same, that the physical archive is no longer in the same place where it is expected to be found according to the info in records of table ADMI_FILES.

Sales order stock does not exists

Dear All:
I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

Hi,
Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
Regards,
Saju.s

Sales order stock 110000193 000050 does not exist

Hi Friends,
I have a problam in Confirmation of Production order against sales order. Every time I confirm the production order system give an error message Sales order stock 110000193 000050 does not exist.
where I check the material in mb52 transaction , the stock shows on that material.
Please give solution .
thanks in advance.
Ajit Sharma

Hi,
It seems you have activated back flush some or all the components.
In MTOscenario, system looks for sales order stock for all the components.
Since sales order stock is not available with your system the message.
Try with movement type 412E in MB1b to transfer components from U/R to sales order stock.system propmts you to give sales order number Pl. provide there & carry out transactuion.
Then the system will pick up the stock & post.
Regards,
R.Brahmankar

BAPI_ACC_DOCUMENT_POST - Int.Order -E/KO/104/Order 400001234 does not exist

Similar Messages

Maybe you are looking for