Sales UI missing standard tabs

Hi,
We are implementing Lean Order Sales UI . We are on Enhancement Pack5. Looks like SAP has given framework to add custom fields but not any missing standard SAP fields and tabs. Has anyone used Lean order UI and added tabs like accounting/additional data at header level. Example standard UI does not have accounting tab or additional data tab but they exist in VA01/VA02. I am able to add the fields using component configuration but not sure how data transfer to sales order is done from the UI.
Vineela Ghanta

Hello Vineela,
Example standard UI does not have accounting tab or additional
data tab but they exist in VA01/VA02. I am able to add the fields
using component configuration but not sure how data transfer to
sales order is done from the UI
I do not have a exposure on Lean Sales Order scenario and neither sufficient informations are available at SDN forum. But as far as the system architecture goes, you have to decide the Middleware whether you need to have webservice or SAP PI...Once the middleware is set then you can use the Function modules(RFCs) -- SLS_LORD_MAINTAIN to cature data from UI and create a Sales Order at ECC end.
http://help.sap.com/bp_cp1600/CP_US/HTML/Scenarios/W48_Scen_EN_US.htm
Do let me know whether this piece of information is helpful for you or not !!
Regards,
Sarthak

Similar Messages

Adding New Field Under Sales Tax/Service Tax Tab in XD01

Hi Experts,
I want to Add new Field in CIN Details under Sales Tax/Service Tax Tab.
Is it Possible to Add Field under Standard Tab.
Thanks & Regards,
Sandip Kokate

hello,
yes there are two ways:
1) change standard screen. (that's the bad one).
2) Use GuiXt tool which provides you with a possibility to add your custom objects into standard screens, change layout, visibility and so on.
http://www.****************/Tutorials/Others/GUIXT/Page1.htm
http://www.synactive.com/tutor_e/tutor.html
i had personally used this third party tool without license ( you will be able to use only basic commands. adding input fields is one of them). I think it is the best way to enhance old transactions which don't have appropriate BADi's, user exits and so on.
br,
dez_

Sales order creation, standard event trigger is taking long time .

We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
Regards,
Sushee Joshi

HI,
we have written SWE_EVENT_CREATE in update task
I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
OR
And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
Please check..
Regards
Pavan

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

ITunes on my iPod Touch is missing some tabs

Can somebody help me?
I have:
+ iPod Touch 4th Generation 32GB
+ Wi-fi connection
+ iOS5 installed
iTunes on my iPod Touch is missing some tabs. The only tabs that's showing on my iTunes are Podcast, iTunes U, Search and Downloads
Also, whenever I try to load un Podcast tab, it ALWAYS say Your request could not be completed.
Thank you very much!

Where exactly are the tabs that are showing, are they a list at the bottom of the page and next to it is the "More" option, or are you referring to the options on the More tab? You can move these options between the bottom of the page and the More section.
Is that the problem, or is there something else missing? (Perhaps it would have helped if you had mentioned what is missing). If it's the Apps section you are looking for, it has its own App button on the Home screen.
As for the problem with downloading Podcasts, I would try getting them in iTunes on your computer if you cannot download them via the Touch's Wi-Fi.

View standard tabs in BP transaction

Hi Experts,
I have a requirement to view standard tabs on BP transaction which are not visible.
For Eg:
While Creating Business partner with role as (BP General) I could see the following tabs :- Address , Address Overview , Identification , Control , payement Transaction , Long text , Marketing Attributes ,Status , Documents tabs respectively.
But while creting Business partner with role as (Finincial Services BP ) I could see differenet set of tabs.
My requirement is if there is a tab name Ratings available on (Finincial Services BP ), I want that tab to be visible on ( BP General screen), i.e I want Ratings tab to be also visible on BP creation screen when the role in (BP general).
Please letme know the respective SPRO settings or is there some other settings which I am supposed to do.
Help will be appreciated.
Thanks and regards
Sourabh Verma

Hi,
For thsi go to transaction SPRO. Follow the path Cross application components -> sap business ppartner -> business partner -> basic settings -> define bp roles.
Here double click on the role and click on hide flag.
Smita.

Without EEWB Is it Possible to add field to standard tab

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Sap r/3 rel 4.6c - F-03 Process open Items Column Width standard tab output

Hello All:
I use SAP R/3 Release 4.6C. I am learning how to use the F-03 Clear G/L Account function. On the front page of F-03 you enter the account number and then click process open items.
The output comes on the screen in the "standard" tab. In this tab you may start to clear your items.
My question: How do you change the width of these columns? I know you can change the column width by moving the column margin with the mouse. I want to know how to change the column width permanently - make the column a "fixed" width that will not change unless I change it.
Do you know which variant I need?
thx
Tracy Lofstedt
Western States Equipment Co

Hi Tracy,
You've posted your question on one of the SAP Business One forums which is not related to R/3. I recommend you repost on one of the R/3 related forums, a list of which can be found here:
https://www.sdn.sap.com/irj/sdn/forums
Kind Regards,
Owen

Modify Sales order Item additional tab B

I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....which is ok. But does it have any impact becoz the same screen fields coulbe used in any of the other transaction .......i just wanted to know if we remove the fields from sale orde item additional tab B and some new details will have some impact

Hi,
Before making any modifications check "Where-used". If it is in some other program other than the VA01/02/03, then better consult your lead before modifying.
If you do not find, go ahead and make the changes confidently.
Regards,
Subramanian

Need to modify Sales order Item additional tab B

Hello all,
I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....does it have any impact on this screen could be used in any of the other transaction .......i just wanted if we remove the fields and some new details will have some impact
Regards,
KK

Additional data B is used to add your own fields also known as custom fields in sales order.
Custom fields can be added to tables VBAK & VBAP (depending on header or item). Similarly you can remove fields if you don't require it anymore.
In short, your requirement can be met but you have to take help of ABAP consultant since it requires maintenance of user exits and modification of screens.

Is it possible Without EEWB Adding filed to standard tab.

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding filed to standard tab. Any body can help out in this.
<b>
URGENT</b>
Thanks
vikram.c

Hi
Copy sandard table to Ztable then make it change mode . Then add new field...
Thanks
Sasmita

How to assign custom tab field value to corresponding standard tab field value.

Dear friends,
I want assign a field value ( advice code , advice code description ) in a custom tab to corresponding field value in standard tab (advcode ,). in me51n.
following screen shot are given below

Hi SK,
It looks both the tabs are custom ones. In that case, you can either use Export/Import statement or you can use Set/Get Parameter ID for setting value.
If one is standard subscreen, you can export value from custom subscreen and use line item level user-ext/enhancement to assign the value on standard subscreen.
Hope this helps.
Regards,
Naveen

Subsinvprocess in the sales order header --- billing tab and in the custom

Hello All
there is a field SubsInvProcess in sales order header - billing- tab and in the customer master - billing tab
what was the functionality of this field. I never worked with it
kindly help on this one.
Thanks,
prasad

Dear Vara prasad,
The value of this field is if you want to print the invoices that are being posted manually you can activate this field.
It will be directly proposed from customer master to sales document, where you can change.
Please let me know if you want any further clarifications.
Please go through this thread also for further reference.
Clarification for usage of Subsequent Invoice Processing in Customer Master
Thanks&Regards
Raghu.k

Difference between sale order Costing & Standard Product Costing

Hi experts
I wanted to know Importance of Sales Order Costing & standard Product Costing.what are the benefits of these.
Regards
Sandeep patil

Dear Sir,
we are implementing SAP in packing industry. In packing industry in PP Bill of material is frequently change, for this we are implementing sales order costing.
We are doing the following things,
1. we are doing the inquiry at that time we are doing unit costing.
2. On the basis of inquiry we are preparing the quotation. the unit costing done in inquiry flow to the Quotation because we r preparing the quotation with reference to inquiry.
3. Similarly we are preparing the sales order based on quoation and unit costing data flows.
4. Now when we run the MRP it doesnot explode the unit costing material requirement.
Please tell us how the unit costing material data will flow to MRP run.
Please reply.
Regards,
Bhadresh

Missing Standards from CDM SGL V6

I have been reviewing the CDM SGL Volume 4 document and I have found a number of missing standards that I would like explained or resolved please.
OMS-30862 was replaced by OMS-30830 but I can't find a reference for this either in the current standards or as having been removed?
OMS-45021 & OMS-45022 was replaced by OMS-61557 but I can't find a reference for this either in the current standards or as having been removed?
Can anyone from Oracle Help? Has anyone found anymore?
Is this the correct forum for CDM questions?
Mark

I can only find the reference from OMS-45021 & OMS-45022 to OMS-61557 and not the other way around, if that is what you mean.
OMS-45021:
Name a database trigger using the convention [application code]_[table alias]_(B/A)(R/S)
Reason
Included in new std. OMS-61557
OMS-45022:
Extend the trigger name with I, U, or D if the trigger is specified specially on Insert, Update, or Delete.
Reason
Included in new std. OMS-61557
One might have expected OMS-61557 to be mentioned as a new standard. I can't find out anymore why it's not, but one reason might be that it was added in a previous release of CDM, from which we forgot to remove OMS-45021 & OMS-45022.
Jan Kettenis

Sales UI missing standard tabs

Similar Messages

Maybe you are looking for