Abap proxy program generation

SAP ECC will be used as the tool for the processing of all invoices;therefore this interface is required to identify and extract all third party fees invoices, and use the data to update the corresponding customer agreements in the existing Asset Finance mainframe system.
Proxy program is scheduled end of the day to generate an XML file for all the third party fees invoices processed in ECC for that business day.
This XML file is transferred to SAP NetWeaver PI using data push from ECC.
now i am very new to this proxy area!!can u plss let me know how do we approach this

Hi,
Only one program could be sufficient to call the Proxy 4 times for different files. In Outbound Program you need to call the Execute_Synchronous method. The no of times you will call it he no of Porxy callls can be possible. It have internal commit statement.
Thanks
Swarup

Similar Messages

Error while executing sender ABAP proxy program in ECC

Hi,
We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at etc etc
Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
Let me know if you need more info.
Regards,
N@v!n

Hi Naveen,
We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
And could you please tel me what is the main diff between in these two.
As we are are using PI 7.31 java stack so for this version what we have to use.
Thanks,
Shivdeep Kumar

Sample Client ABAP Proxy Program - PI 7.1

I created Proxy. I need to call in a Report Program. I am using PI 7.1
Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1

Hi,
>>>Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1
it's exactly the same as for 7.0 and there are blogs that show such sample reports on SDN
just do a little search and I'm sure you can find it
Regards,
Michal Krawczyk

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

How to extract attachment from ABAP proxy and store in archive link....

Hi Experts,
I need to consume an incoming email attachment in the ABAP Proxy program (POP Mail --> PI --> ABAP Proxy) and then store this file in the IBM content management server through the Archvie Link connection.
Any idea how to implement this piece of code in ABAP?
Regards,
Shobhit

Hi Shobhit
You can get the files from Sender Mail adapter. In proxy implement the method of protocol IF_WSPROTOCOL_ATTACHMENTS as said above.
Archive Link supports HTTP, RFC etc depends on the system you are going to use for archiving. For your case you have IBM server i think you have to do HTTP synchronous. This will be like an interface again for you.
Why are you using ERP system in middle. I think you can directly dump data to IBM server.
Thanks
Gaurav

How to insert ABAP PROXY in customized ABAP program

Hello experts,
I am a ABAP developer and I am developing a program to send XML strings to a legacy system using an ABAP PROXY but I have run into a roadblock as follows:
My PI colleagues who know PI but not ABAP have created a ABAP PROXY data type with the structure that I need to be populated from my program but cannot tell me how to get the data into this structure. They have directed me to SERVICE INTERFACES where there is a class and method EXECUTE_ASYNCHRONOUS but this is where we all have a road block. I am not sure whether I have to just use this class and method in my program to populate the data type proxy previously created or whether a completely new proxy has to be created under service interfaces.
Any help would be appreciated.
regards

Hi David,
I thought you are using 7.0 ... sorry for the confusion.
Here are the steps that you can follow for proxy generation for SAP PI 7.1:-
TCode - SPROXY
1. The interface objects are ordered according to software component version, namespace and object type.
If no connection to the Integration Repository exists, the system only displays interface objects in the tree structure for which a proxy exists in the system.
2. Choose an interface object for which no proxy already exists. To create a proxy for this interface object, double click the context menu Create Proxy.
3. In the dialog box, specify the name of the package where you want to create the proxy objects. You can also specify a prefix for the names of all objects to be created to avoid naming conflicts with names that already exist in the system.
Result
To generate proxies, the WSDL description of the message interface is read using HTTP.
If no naming conflicts occur during the conversion, you can call the hierarchy of the generated objects from the tab page "Structure". The objects are only then saved in the system once you choose Activate.
If the description is changed in the Integration Repository, you must regenerate the proxy objects
Hope this is helpful.
Regards,
Neetesh

Abap Proxy Generation (Outbound)

Hi All,
I trying to create the ABAP Proxy(OUTBOUND)
I have created the message interface in XI and created outbound proxy in R/3 by using SPROXY Tcode.
Created the ZProgram by calling class.
Please see this link
http://www.directupload.net/show/d/807/823PgPdG.jpg
what is wrong here ?
Regards,
Fth

they are only warnings, what happens if you go ahead activate and run the program?
Regards
Raja

ABAP Proxy Generation

Hi All,
I trying to create the ABAP Proxy(OUTBOUND)
I have created the message interface in XI and created outbound proxy in R/3 by using SPROXY Tcode.
Created the ZProgram by calling class.
and completed the Configuration steps in integration builder like (Receiver determination, Interface determination, Receiver Agreement and Receiver communication channel).
When I trying to execute Zprogram in R/3 it is giving "Proxy creation do not transport" and I did not see any message in SXMB_MONI in XI and R/3 too.
Is there any thing needs to be created in XI or R/3.
any help how to trace this..
Thanks
M

HEY MURALI,
In short : these are development steps for ur proxy :
1. generate the proxy based on a package of 4 layer strucutre.
2. After generating the proxy , activate it.
3. i will always test my proxy , at this level so that i can see its working and no issues w.rt. calling from z-program
4. i will now go and check the working of z-program and activate and execute it. you can also check if the earlier steps were successful , w.r.t debugging ur program.
5. Also check the settings/ configurations if anything missing.
Hope this helps
Vara
[PLEASE REWARD FOR POSTING]

ABAP Proxy generation terminated (WSDl choice element not supported)

Hello
Im trying to generate ABAP proxy from WSDL file (A valid XSD file has imported as External definitions in to XI Integration Repository and created Out bound Interface which gives WSDL file for Proxy generation in SPROXY).
Unfortunately one of the WSDL file element "<choice>" not supported by ABAP Proxy Generation. it gives the following error.
Proxy generation terminated: WSDL error (<choice> not supported)
Message no. SPRX038
Syntax of <choice> element code in WSDL file:
<xsd:choice minOccurs='1' maxOccurs='1'>
<xsd:element name='Employees' minOccurs='1' maxOccurs='1'>
</xsd:element>
</xsd:choice>
Can some one please help if already come across this kind of problem.
Please suggest me if there any alternate element for WSDL <choice>.
Regards
Rajesh

Hi Aamir
Thanks for your help...
I have gone through attached thread.
Does It means should i change <choice> element with any alternate element. If it is the case can u suggest me any alternate to <choice> element.
Can u pls tell what are all changes i need to do in WSDL file to support ABAP proxy generation.
Regards
Rajesh

Problems in ABAP Proxy Generation

Hi All,
I tried to generate an ABAP proxy for outbound message interface "Interface_ABC", which is under software component "DEF".
In our development system, I had successfully created ordinary function modules and structures under the package "/XYZ/UVW" using the prefix "/XYZ/".
When I began the proxy generation, the system asked me to specify the package and prefix. So I specified the package to be "/XYZ/UVW" and prefix to be "/XYZ/".
Then a warning window pops up. It reads "Package /XYZ/UVW does not belong to DEF". I clicked "OK". The "Create Proxy" screen shows up. Then I clicked the "Save" button. This time an error window pops up. It reads "Cannot extend package /XYZ/UVW". The action is thus cancelled by the system.
Does anybody know what is the reason for this problem and how to solve it?
Best Regards
Jerome

Please check the properties of the package in which you are tyring to save the PROXY.
In your case it looks like the property PACKAGE NOT EXTENDABLE is switched on. Once you uncheck you should be able to save the proxy in that package.
Regards,
Ravi
Note : Please reward points if you find the answer useful.

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

Client ABAP Proxy : how to know which program is calling that service interface proxy

Hi All,
I have prepared some client proxy in ECC to communicate with PI.
But, if I am not wrong, unlike server proxy which is written directly in the class Provider class in SPROXT transaction, in client proxy we write abap code to trigger proxy in SE38 .
My question is : If I am in SPROXY and looking at any outbound SI, of which proxy is already generated, then how can in SE38 can I find which program is triggering that interface or proxy?

Hi,
check below thread for calling client proxy
ECC outbound abap proxy (client) - Get ECC messageID from Protocol
Regards,

ABAP Proxy generation descrepencies with filed and method...

Hello,
I have two question regarding ABAP Proxies.
The first one when i regenerate proxy for a interface, It is not generating the same filed as before and my ABAP program fails.
I have Internal_organization_Descri -- Now, It is not giving same field rather It is giving Internal_organization_Descr
It is missing 'i'
One more problem is It is chaging method also
Previously it was showing "Sales_order_Sync"
Now, It is showing method as EXECUTE_SYNCHRONOUS
Why It is these proxies behave differently, is there Service Pack dependency.. What is the best way to avoid these descripencies...Pls help
Srinivas

Hi,
Please find the explantion about your doubts on ABAP Proxy.
1. The field names might be changed based on the changes in XI in Data type for this field.
Whenver you will be regenerating the ABAP Proxy, it considers the Message type and internally the Data types that have created in XI. So any changes in these objects may lead to change.
Verify your field names in XI
2. The Method to be used to call ABAP proxy is EXECUTE_SYNCHRON for Synchronous communciation and EXECUTE_ASYNCHRONOUS for async communication. These methods are used in ABAP source code. So please let me know where you had find this method "Sales_order_Sync"
The EXECUTE_SYNCHRON is the proper method.
Let me know if you need any more info.
Refer
ABAP Proxy outbound program - purchase order send
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Thanks
Swarup

Call se38 program from an abap proxy

Hi, All,
For some reasons, I have to call a se38 program (or tcode) instead of calling a FM from an abap proxy. Also I have to pass an internal table to the program (or tcode). Is there anybody know how to do it? Thanks.
Meiying

Is there no BAPI available for this "reason"?
Or create your own (BAPI compliant) FM and just call that?
Please explore transaction BAPI (incase you are not aware of it yet).
If you exposed a remote way to submit (any) report using an internal table which that "any report" can use, then chances are good that your ABAP proxy would be a bit of a security hazard...
Or am I missing the point here?
Perhaps you could explain the scenarioa bit, and then appropriate solutions can be suggested.
Cheers,
Julius

Error in ABAP Proxy generation?

hai pals,
my intention is to push the data from XI to SAPBWSEM system throgh an ABAP PROXY.
       but , here i got an error which i already mentioned in the forum, that is " no connection to integration builder(only local data visible) ".
        i went to the integration engine configuration in "SXMB_ADM" transaction in SAPBWSEM server.
        in sxmb_adm transaction ,the system ask for the "specific configuration data-catagory" like TUNNING , MONITOR,RUNTIME,TRACELOG,DEBUG and RFCADAPTER.
         im little bit confused in choosing the "catagory of configuration data".so can u pls help me in this error.
with cheers.
rajesh

Did you create the RFC Destinations LCRSAPRFC and SAPSLDAPI to point your SLD ? If not do that.
Then create RFC Dest INTEGRATION_DIRECTORY_HMI type H. Look at your XI box and make these 3 RFC Dests.
Then use the following thread to fix your IFR_ADDRESS
Values for table SPROXSET
regards
SKM

Abap proxy program generation

Similar Messages

Maybe you are looking for