SAP 4.1 SP2 - Dashboards Error in Query Browser

Hello Experts,
I am using SAP Business Objects 4.1 SP2. I am getting attached error while trying to access Universe/Bex query through Query Browser. Please see below the exact steps that I am following -
1. Open SAP Dashboards. Select Query Browser option.
2. Select Bex/Universe any one of the option.
3. Select Cube/Universe based on the selected option.
4. It throws below error.
Please note, I have already tried following without any luck -
Redeploying dswsbobje application and restarting TOMCAT.
Increasing APS memory.
Please help.
Regards,
Abhijit

Please make sure all the services required services are running.. mainly see if the DSL bridge service is working fine..
The BICS or Universe selection would not work if DSL service has problem..

Similar Messages

  • Dashboard error in Query as Web Service from WEBI

    I have created a WEBI and published it as QAAWS.When i right click and test it with my know parameters and it is working fine. Then i have called it in my Dashboard application.I linked the desired input prompts and output fields in Dashboard.When i run this Dashboard i am getting an error.(It is attached here).
    I have searched many days to solve this but failed .this is my last try.Please help me to get rid of this issue.
    thanks in advance,
    aby

    Hello Nisha,
    as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
    This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Webi queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Best Practices for dashboards using Query Browser

    Hi,
    As aligned with business requirement, dashboards are using Query browser to fetch data from universes built on SSAS cubes. The issue here is it takes around a minute to initially load the dashboard which is very long as per requirement. Can I find any document or basic points to be taken care of, on improving performance for these dashboards.There are around 30 Queries being used.(cant integrate the queries to decrease the number). Also , using ranking logics at excel level, does this affect the performance?? (All vlookups and "should not be used" formulaes have been omitted)
    Thanks in advance.

    Hi Aarti,
    Check the thread http://scn.sap.com/thread/3482541.
    Any functions used in Excel level like ranking,vlookp etc affects the performance.
    Also check the components you have used in Dashboard as some of them affects the performance.
    Regards,
    JC

  • Available OLAP connection list not showing in Query browser

    Hi all,
    Hope everyone is doing great. I tried using query browser to consume BEx queries in dashboard. But I am not able to see the available connection list after choosing BEx query as my source in query browser. Attaching a screenshot of the same.
    Request your assistance in solving the issue. Am i missing any settings ? Please help
    Many thanks in advane,
    Nikhil Joy

    Hi Nikhil,
    Are you able to see the list of universes (Unx)?
    Also you could check the following
    1. Logon to Central Management Console (CMC).
    2. Go to Applications.
    3. Now double click on Web Service and go to Properties.
    4. Update the Access URL as mentioned below and click on Save & Close:
    http://<WebServer>:8080/dswsbobje
    Confirm if this URL is accessible in the browser.
    5. Launch Dashboard Design, open Query Browser, click on Add Query and enter BusinessObjects Enterprise logon credentials.
    Regards,
    Noopur

  • Crystal Reports when connecting to SAP ERP gives Logon Failed error

    Hello Friends,
    We are trying to implement the SAP Best Practices Crystal Reports and Xcleisus Dashboards for ERP. We are using BI 4.0 SP2, Crystal Reports 2011 SP2 and SAP ECC 6.0 FP 5.
    We have done all configurations at the SAP end and successfully adpated a couple of Crystal Reports and they work fine.
    My client machine crashed and I had to reinstall my Windows and all Client Tools. After the installation, when I tried to adapt a few more reports, I face the below problem:
    After opeing the Crystal Report, when trying to Set the DataSource location, I select Create New Connection and select SAP Infosets. The SAP logon popup comes and I select the ECC system and enter the logon credentials for SAP ECC, I get an error message saying
    Logon Failed.
    Details: some square boxes.
    The error doesnt really make any sense. Unfortunately, I am not able to test this scenario in any other machine as I am the only developer here. I am almost sure this is because of some configuration set up in my client machine,
    Can some please help?
    Thanks in advance!

    Hello,
    I recommend looking at a couple of things:
    1) Do you have the latest Crystal transports installed with ECC?  SP 2 has new transports.  Check this subdirectory
    Crystal Reports 2011\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports\unicode_compatible\cofiles
    Use STMS to see if transports are installed
    2) Are you using 3.1 ?  Do you have the Integration Kit installed on ECC and client side?
    Tammy

  • Query Browser not available in Dashboards appl !?

    Hello,
    We installed SAP BO Dashboards 4.1 SP2 (14.1.2.1121) and want to use universe queries in the dashboard.
    The workspace feature "Query Browser" is empty.
    We don't get the icons to logon to BOXI (to universe).
    Is this an installation issue? What do we need to check?
    Thanks,
    Bernd

    Hi Bernd,
    Happy to hear that, but please be aware using excel 2013 with dashboard designer. Most of the time it make issue in integrating with the data. Lot of discussions are happened regarding this. Few are listed below.
    Excel 2013 and SAP BusinessObjects Dashboards 4.1 Support Pack1 version 14.1.1.1036
    SAP BO Dashboard 4.1 Support pack 1, exported swf file URL component problem - Office 2013
    Better to go with the Excel 2010. Just felt to highlight the issues before going deep into the design.
    --SumanT

  • Error  in query definition

    Hi all,
    I am getting the following error when accessing HR payroll quires
    "Formal error in query definition ( DIM <-> from[NAV]) ?
    Can any body help me ?
    KK

    I am getting the same error. Could you pls post the solution. I am on the following level (from the error message.
    BI Java Release: 7 - Patch level: 0000000011 - Description: BI Web Applications Java - Additional info: - Production mode: true
    BI ABAP Release: 700 - Patch level: 0012 - Description: SAP NetWeaver BI 7.0 (SAP_BW) - Additional info: - Production mode: true
    Java Virtual Machine IBM J9 VM - IBM Corporation - 2.3
    Operating System AIX - ppc64 - 5.3
    I searched the OSS and found a note 1001621 which said apply support package: SAP_BW_VIRTUAL_COMP - Rel 700 - Pkg name SAPK70012NVCBWTECH
    But, our basis guys came back with the reply that the solution suggested in OSS note is for SAPKW70011, but our system is already on SAPKW70012. So, this note cannot be applied.
    Any help would be appreciated.

  • Error in Query (EXCEPT)

    Dear Experts,
    I Have Error in query
    My Query Such as:
    Select TransNum from Oinm where transType=310000001
    Except
    Select Docnum from [dbo].[Opn_Stock] where U_ TransTypeStk=310000001
    Show Error: Browse mode is invalid for statements containing a UNION, INTERSECT and EXCEPT operator.
    Note: This query smoothly run in Sql 2005 but throw Error in SAP while execute in sap query generator.
    Regards,
    Sumeet Vaity

    The SBO generally inserts a for browse line at the end of the query. But not allways! E.g. probably your query would work if you refrase it in such a way:
    Select TransNum from Oinm where transType=310000001
    Except --union
    Select Docnum from dbo.Opn_Stock where U_ TransTypeStk=310000001
    That is it does not insert this line in case of a union, even in the comment part!

  • Disable login prompt for SAP NW based Xcelsius Dashboard

    Hi all,
    Need assistance to understand what needs to be done in the below case:
    Current scenario:
    1. Developed Xcelsius Dashboard based on SAP NW Connectivity on BO XI 3.1 SP2+.
    2. Configured trust between SAP BW server and BO Server using steps outlined in integration kit(login/accept_sso2_ticket, etc).
    Imported user roles in BOE and enabled SAP authentication.
    After this, WEBI Reports based on Bex queries refresh in Infoview without prompting for Login id/Password.
    3. Configured SAP Server to enable portal/interop switch to display the Xcelsius Dashboard within Infoview which is the existing BI portal. Used Hyperlink object for enabling the link.
    In the hyperlink, I am using the same link which gets generated when I use the option Xcelsius 2008>>file menu>>SAP>>Launch
    Issue: On click of Hyperlink, I get SAP EP Login window. Once I fill up the SAP user id and password, the dashboard comes up
    Server Configuration:All on same domain
    SAP system ID=X(SAP BW server)
    SAP system id=Y(SAP EP Portal)
    BOBJ system Z(BOBJ Server)
    User roles stored in X. Entitlement system defined in Z for SAP BW Server X.
    Dashboard is not available in SAP EP Portal in any folder as of now. Have not created any roles yet.
    As per the various posts and KB articles,
    Do I need to enable SNC for both X and Y? or trust between Infoview and SAP EP portal can be enabled without enabling SNC?
    Just like SAP BW server, does the SAP EP portal also has *.cert files that can be used to exchange with BO Server to enable trust.
    Thanks,
    V Fernandes

    Hi Ingo,
    Thanks for your explanation. I was referring the configuration mentioned in the wiki article for displaying Xcelsius Dashboard in Infoview where this was explained as a possibility. Even though its not Lean.
    Link: [http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinBOE+Infoview]
    The only difference in my case is the use of SAP Authentication instead of Enterprise.
    Thus as per your last update the following workflow is only valid:
    1. User logins to Infoview using SAP Authentication.
    2. User clicks on Xcelsius Dashboard Hyperlink object.
    3. SAP Enterprise Portal login pops up within the Infoview Workspace.
    4. User has to fill in the Login credentials again.
    5. Dashboard load up successfully.
    Please correct me in case I am wrong.
    Thanks for the response.In case there is any other way this can be achieved, then please do let me know. Appreciate for all the help.
    Regards,
    V Fernandes

  • Unable to find the universes in the Query Browser Panel of Dashboard Design

    Hi Experts,
    Can any one please help me out, as I am Unable to find the universes in the Query Browser Panel of Dashboard Design Tool.
    Thanks & Regards,
    Shivani
    Edited by: Shivani Yemula on Jul 19, 2011 4:40 PM

    Hi,
    I got the same problem recently in BI 4.1 Platform and all the permissions were already set, I mean on the universe and all others which are required but I found there was some problem in Dashboard Cache server, when I restarted that it worked fine ...
    I was able to see the universe once I restarted it. I was getting a Java unable to invoke object Error..
    Thanks,
    Vamshi

  • Query browser error for a Bex query

    Hello,
    I am using Query browser in Dashboards 4.0 to retrieve the data from Bex query. When I select a few dimension measures out of the structure with certain key figures and clicking the preview of the results, I am getting the error message as "Request Processing failed(XLS 000009)[] Error DBMAN(257):SQL Error:58115
    Error RS Exception:Arithmetic overflow error converting" kind of error message.
    When I remove some dimension members which were selected, I am able to see the preview of the data. What could be the probable reason for the above kinda error?
    Thank you.

    These are generic error, please go through the below link and let us know whether its helpful or not.
    Microsoft ODBC data manager not found
    Error during "Add Query" in Dashboard 4.0
    Happy to help you!
    -SumanT

  • Error of query launch in web Browser

    I test a standard query 0FIGL_VC1_Q0002, It's run well in BEx(Excel)
    But in BEx->Analyzer (SAP BW 3.x)->Tools->Launch in web Browser->Query(Default view) 
    I got an error page below.
    http://sapecc6:8000/&sap-client=800sap/bw/bex?sap-language=EN&CMD=LDOC&infocube=0FIGL_VC1&query=0FIGL_VC1_Q0002
    Service cannot be reached
    What has happened?
    URL http://sapecc6:8000/_sap-client=800sap/bw/bex call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system ECC with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:1-i:sapecc6_ECC_00-v:0-s:404-r:Notfound
    I feel the link address is not make sense. So I modified it
    http://sapecc6:8000/sap/bw/bex?sap-client=800&sap-language=EN&CMD=LDOC&infocube=0FIGL_VC1&query=0FIGL_VC1_Q0002
    After enter the modified link address in IE I can browse web report well.
    Hope someone give me some help. Thanks.
    ps:TCODE:SICF
    default_host->SAP->bw->Test Service is OK
    and the login address is http://sapecc6:8000/sap/bw/bex?sap-client=800
    Edited by: nono.lee on Feb 27, 2011 9:29 AM

    i Guess its something to do with your browser setting on your PC

  • Getting Dashboard Error

    Dear Sir,
    I used SAP Addon that is "Dashboard Packaging Wizard".
    When i select my own Dashboard then i getting the error like.
    The requested dashboard does not exist.
    Dashboard:/com.sap.b1.dashboards/0010000106.XXX_Top_10_BPs.DAS0001/default.html
    If this dashboard is newly imported, ensure that the SAP Business One EventSender Service
    has been started; then wait for several minutes and try again.
    here i attached screenshoot also.
    i wait for your warm replay
    Thanks & Regards,
    Nishit Makadia

    Hi,
    Please refer SAP note for solution 4.2:
    1619422 - B1ic_Troubleshooting Guide for B1ic Dashboard/Cockpit
    Thanks & Regards,
    Nagarajan

  • Dashboard to BEx query call run time very slow (7-8 mins)

    Hi Guys,
    I am currently working on a project where BEx query is being consumed using BICS. The functional team has built a BEx which is being cached in Webi by the BO developer and then that cashed Webi is being used in Dashboard. We have many hierarchies (Fund Center, Profit Center, GL Account etc.) used in the dashboard.
    BEx query > WEBi (Cached) > Dashboard
    Clicking the main level in hierarchy in dashboard the data comes back in 2-3 secs as the data is cached in Webi
    ISSUE: In Dashboard based on where user is on the Fund Center hierarchy there is a button called “Summary Report” on the dashboard which calls the BEx query and that second call takes roughly about 7-8 minutes. How could we reduce the run time of the second query?
    The secondary query uses the same data set as the first one but as the data is cached in Webi and it uses Web services to pass data to dashboard, so any call back from dashboard to the cached webi the hierarchy information is lost  and thus the secondary query call to BEx query.
    Would it be possible to recommend any solution where we could bring the run time of the secondary call to less than a minute?
    Thanks,
    Keys

    First update to current frontend patch. many correction are included.
    Further check these notes: (relavant only if Analyzer is culprit)
    1160093: REPAIR MODE - Prog error/performance problems when using large workbooks
    1289127: REPAIR MODE - BExAnalyzer: performance issue applying styles in Excel 2007
    1293255: REPAIR MODE - BExAnalyzer: crash when repairing workbook with Excel 2007
    1150242+1094799: ANA_USE_SIDGRID - Improving performance/memory in the BEx Analyzer
    1179647: ANA_USE_TABLE - Performance: Network load in BEx Analyzer
    1260213: ANA_USE_OPTIMIZE_STG - Performance problems during workbook opening in Excel 2007
    1287179: ANA_SINGLEDPREFRESH - Single Data Provider Refresh
    1286653: Performance issues while displaying hierarchy (especially in Excel 2007)
    1352375: ANA_USE_SIDGRIDWBUF / ANA_USE_SIDGRIDMASS Performance improvements in a WAN (roundtrip reductions)
    1373214: Workbook compression
    1392745: ANA_CACHE_WORKBOOK - Workbook caching

  • 5200:Error Executing Query

    Hi,
    I am getting below error while running a report in FR.
    5200:Error Executing Query:
    Could you please let me know what is the problem and how to resolve it.
    Thanks,

    Hi,
    This might be due to corrupt POV this can be resolved by just deleting POV for the use and again setting it up.
    Regards,
    Gyan

Maybe you are looking for