SAP BI 7.4 ABAP Only, Do i need Java stack

Hello,
We are implementing BI and currently we only installed BI ABAP Stack only, customer will look for reporting and dash boards In future. Customer also has plan to implement SAP Business Objects. Could you please advise me here
Do we need BI Java stack for BOBJ ? With out Java can we do reporting and dash boards ? Can some one please help me to understand
Please
Thanks,
Aravind

Hi,
SAP Business Objects Business Intelligence 4.0 is installed on any machine ( windows/unix, depending on your architecture). It is integrated with a backend BW(also called BI) system. Now this BW(BI) system needs to be dual stack ( both ABAP and JAVA; as many features of SAP Business Objects Business Intelligence 4.0 requires BW java portal).
You cannot add ABAP ( like an add-on) to already installed java stack. ( though the reverse is possible, but not with NW 7.3).
What you can do now is to install NW 7.3 ABAP as a separate system and then integrate your NW java with your ABAP ( i.e, change the UME from java databse to ABAP in your java stack). This has to be done as ABAP+JAVA installation option ( as a single instance) is not available for NW 7.3 ( exception being for PI and Solution Manager). No further change in SAP Business Objects Business Intelligence 4.0 is required.
For more infor refer to
BI and BO - ABAP, Java or Dual stack
Regards

Similar Messages

Introscope Host Agent for ABAP only instance, fails with java.lang.NullPoin

Hello,
I'm trying to configure the Introscope Host Agent Adapter for ABAP 7.02 instance.
Solman Version is 7.1 ST 4, BASIS SP9.
I did created the Trust relationship between DAA and hostctrl and
also the same setup working find for Java Instance or ABAP+java Instance,
I'm not sure whether IS Adapter can be installed for ABAP only Instance.
Log file from Solman:
java.lang.NullPointerException
at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:119)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setJCoUserAndPwd(AgentConfigWriter.java:1085)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setLogonData(AgentConfigWriter.java:1075)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.createJcoDestinationVO(AgentConfigWriter.java:677)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.prepareSapAgentConfiguration(AgentConfigWriter.java:284)
at com.sap.sup.admin.wily.hostagent.Setup.setupAgentConfiguration(Setup.java:272)
Thanks
Srikanth M

Hi
I am sure, it is logically incorrect, how you deploy byte code agent in abap only instance
Introscope Bytecode Agent runs on managed systems based on J2EE engines to report data to the Introscope Enterprise Manager, so it has to be setup only for Java Stacks.
Please check with the wily config guide again.
I am watching this thread for further view from others.
Thanks,
Jansi

SOLMAN 3.2 abap only install. Adding Java?

I'm running SOLMAN 3.2 SP10+ on WEBAS 6.20.
Is there a note anywhere that tells me how I might add the java stack components to this install?
We had some advice early on in our implementation that said we didnt really need the Java stack. As we move forward with BI and EP it has become pretty clear that we should at least have it on our SOLMAN install.
Thanks in Advance,
M.
P.S. Also thanks for the SOLMAN forum. Finally :P

Hello Michael
For normal SolMan operations you don't need the java stack (but a windows client! SolMan Transactions don't work with the JavaGui).
If you have a Netweaver04 system with SP-Stack >= 11 you can use the Solution Manager Diagnostics as a separate installation, see the link
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000634682&
I cannot tell more, because have decided to wait for SolMan 4.0 (March 2006) which will have it incorporated.

In my company abap engine is running but java stack services is no running

Hello experts,
abap stack is running but java stack is not running give me the solution

Hi,
You would have to start by looking at the logs for webas java.
Is this parameter set rdisp/j2ee_start to 1?
Which version of SAP are you running?
You would have to provide more information regarding your landscape.
Regards,
Vishnu.

Web Service in ECC ABAP only.

Hi
although this question is not related to PI I thought more people would know about Web Services in this forum.
I have a single stack ABAP ECC system (has no JAVA stack)
Can I still create a web service from one of my Function Modules and get something to then consume this ? i.e. will it work?

Thanks for the replyt. Yes I know they can be...and I've got this far.....and this is documented in SAPHelp http://help.sap.com/saphelp_nw04/helpdata/EN/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
But this does not explain if possible without a corresponding JAVA stack.
I thought somebody might know this.

ADS for SAP NW2004s Sneak Preview ABAP..

Hello folks,
Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
Regards,
Sarath.

I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.

Adobe form on SAP NetWeaver 7.0 ABAP Trial Version SP12

Hello,
I want to develop adobe form on SAP NetWeaver 7.0 ABAP Trial Version SP12. I have a message that says ADS is missing. I know also that I need Java Stack. Do you know if it is possible to install this component. If yes where can I find this components.
Thank you
Christophe

Try this one.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8
Regards,
Rich Heilman

How to enable ping service on java-stack only system

I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
     category: Web Application Server
          Web AS host name: chrisSAP:50000
          Web AS path: /webdynpro/dispatcher/
          Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...

Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated.

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

JAVA Stack for consuming and providing Services with ABAP?

Hi Experts,
I would like to know if I need to have a Java Stack when I want to build a Web Application with Web Dynpro Abap and consume Enterprise Services from the Enterprise Service Repository. Additional own created services in ABAP should be provided. Is a Java stack necessary for that? Or is an ABAP Stack enough?
Thanks a lot for your answers?
Best regards,
Ingmar

Hi Ingmar,
You do not need a Java stack to build or run Web Dynpro ABAP application. Web Dynpro ABAP runs on ABAP stack.
Just to consume a web or enterprise service from Web Dynpro ABAP application, or any ABAP application for that matter, you do not need Java stack, either. NetWeaver Application Server contains a component called ICM (Internet Communication Manager) that enables the AS to play both as a service provider as well as a consumer.
The part about consuming Enterprise Services from the ES Repository is more complicated, though.
ES Repository is only a modeling tool. Services are actually implemented in the respective backend systems and then registered in central Services Registry. So, if the Enterprise Service you want to consume comes from an application that runs on Java stack, although I do not have any example of that handy, then obviously - Java stack is needed. This is irrelevant, however, if your question only pertains to the consumer part.
I hope this helps.
Andrzej

SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

Hi BI Experts,
I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
I appreciate all your input.
Regards,
OSR.

Hi,
Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
If you want it in different client, you change it in BWMANDT field of RSADMINA table.
hope it helps.
Regards,
Pruthvi R

How do I populate 0CCMSATPH for ABAP only instance

Hi All,
I have inherited a SAP Solution Manager installation and I am trying to configure the system correctly.
In an Early watch report for one of our ABAP only systems (ERP6) it states
Reading performance data from BW returned neither data nor an error code. A timeout may have occurred.
Infocube: 0CCMSMTPH used in section 'Workload Overview <SID>'.
So I determined that this related to End to End Analysis and configured SOLMAN accordingly and am now getting data for SOLMAN itself in this cube but nothing else. I also determined that the Extractor WA (STATISTICAL RECORDS SECONDARY EXTRACTOR-0CCMSATPH) from Extractor FWK Administration is responsible for this data.
So my question is this, where does this extractor come from as I don't appear to have this extractor for the ABAP system it's complaining about?
SMS uses SMDAgent but that's because it's a dual stack system but for an ABAP only system surely this isn't required, if this is where the extractor comes from?
Also a related issue, in the log for this extractor for SOLMAN it has the following message "DL: Warning: Component not found in Target Structure:0INFOPROV". What is this and should I be concerned?
Thanks
Craig

Does this topology/configuration make sense? Yes.
To set up "agent only" instance:
1] Install MDEX,
2] Install PlatformServices (answer N for running EAC),
3] On Central server update AppConfig.xml (add definition for new dgraph),
4] On Central server "runcommand.sh --update-definition"
5] Install Deployment Template by running deploy.sh (answer N for integrate with Workbench),
6] Start ECA, which starts dgraph - $ENDECA_ROOT/tools/server/bin/startup.sh (Make sure you don't have eca.xml in $ENDECA_CONF/conf/Standalone/localhost)
7] On Central server "initialize_services.sh",
8] On Central server "runcommand.sh DistributeIndexAndApply"
Is the agent only server suppose to also have Workbench and/or our application (configuraitons)?No and no.
How does the Control server know there is another instance which is running with just an EAC agent?The AppConfig.xml on the Central server instance needs to be updated. Don't use the Workbench EAC admin console to do this. Only use that interface for stop/start and monitoring. Any permanent config changes you should make to AppConfig.xml by hand.
How is the dgraph process on the agent only instance started?$ENDECA_ROOT/tools/server/bin/startup.sh
How do I "turn on" an EAC agent only instance/server?
Edited by: EndecaJoe on Nov 9, 2012 8:55 AM

Impact of Installing BI Java on an ABAP only BI 7.0 system

Afternoon Everyone,
I'm looking to answer a couple of questions around installation of BI Java on an ABAP only BI 7.0 system.
Firstly, I am looking for some guidelines around common problems we would expect to see if a BI java stack is implemented on a BI 7.0 system that is currently ABAP only. I would like to be able to gauge the impact of any such exercise, so we can translate that into extra project effort (both technically and functionally).
Secondly, I am looking for suggestions around the areas where the post Java install regression testing should be focused so we can ensure the existing functionality of the system is unaffected by the install & activation of the BI Java stack.
Id be really grateful for any input you would be able to provide around these questions!
Thanks
Tim.

Hi,
Pls Look at note 917950, esp. Problem_Analysis.zip in Attachments for the Installing BI Java on an ABAP only BI 7.0 .
For Some more thoughts ,pls chk below link
https://www.sdn.sap.com/irj/sdn/threadmessageid=3034054#3034054
What are the pros and cons of installing java+abap stack for portal?
WAS 6.4 with Java or ABAP + Java
http://help.sap.com/saphelp_nw70/helpdata/en/29/ff9036e1e4b603e10000009b38f889/frameset.htm
*pls assign points,if info is useful*
Regards
CSM reddy

Installing SAP NW 7.01 ABAP Trial Version for dummies

Hello sappers...
Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall. After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet? If it's to generate an IP address, surely my computer has one. Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind! Anyway, I have tried with and without this on my various attempts.
ANYWAY.... the sorry saga goes like this...
I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
That's one of my better attempts.
Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect). Trying to sign on produced equally disheartening error messages...
Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
Log text gives
(Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
     at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

ok, this is the log from my latest attempt...
> Subprocess starts at 20090312182156
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182159
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182159
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182159
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182205
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182206
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182206
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182206
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182206
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
VERSION    = 7.7.06
BUILD      = DBMServer 7.7.06   Build 007-123-197-046
OS         = WIN32
INSTROOT   = C:\sapdb\NSP\db
LOGON      = True
CODE       = UTF8
SWAP       = full
UNICODE    = YES
INSTANCE   = (unknown)
SYSNAME    = Windows
MASKING    = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182210
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182210
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182210
OK
NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
> Subprocess starts at 20090312182211
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182211
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182211
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182211
OK
7.7.06.07    C:\sapdb\NSP\db
> Subprocess starts at 20090312182212
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182213
OK
State
OFFLINE
> Subprocess starts at 20090312182213
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182214
OK
State
OFFLINE
> Subprocess starts at 20090312182214
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182214
OK
State
OFFLINE
> Subprocess starts at 20090312182214
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20090312182228
> Subprocess call failed
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'
> Subprocess starts at 20090312182303
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182304
OK
State
OFFLINE
> Subprocess starts at 20090312182304
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182305
OK
State
OFFLINE
> Subprocess starts at 20090312182305
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182305
OK
State
OFFLINE
> Subprocess starts at 20090312182306
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20090312182316
> Subprocess call failed
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'

Error While Installing SAP NetWeaver 7.0 ABAP Trial version

Hi,
While installing SAP Netwaver 7.0 ABAP on my Windows XP SP3 virtual m/c i got this error at starting only -
Path contains reserved character (':'):
K:
NWASABAPTRIAL7020
can any one help me out....

Path contains reserved character (':'):
K:
NWASABAPTRIAL7020
Remove reserved character : in between path
Regards
Siva

SAP BI 7.4 ABAP Only, Do i need Java stack

Similar Messages

Maybe you are looking for