SAP BI4.0 upgrade right software

Hi - We are planning to upgrade from BO3.1 to BI4.0. I've downloaded the installation software from SAP download center. The version it is showing is SAP BI4.0 SP02 (support pack 02). Is this the right version to start the full deployment or I need to deploy BI4.0 base version. I'm looking for the right version to start with.
Regards,
Suresh

Yes, this version is correct.

Similar Messages

I have Photoshop CC, but I'm getting daily reminders to upgrade the software. This can't be right...

I have Photoshop CC, but I'm getting daily reminders to upgrade the software. This can't be right... Plus, I get reminders to upgrade Photoshop CS6, but I deleted CS6 a while back. Any help would be great...

Sign in or activation errors
Mylenium

Windows hangs boot after upgrading any software

Hi,
My Windows 8 Pro x64 Dell XPS8500 machine developed a really weird problem. (The problem actually began a while back - first noticed maybe 4-6 month ago - but only now trying to fix it.) It re/boots fine so long as I don't try to install anything.
However, installing any software upgrades causes Windows to hang on boot. The software upgrades that I tried are Evernote, iTunes, Java VM, and all of them are triggering the same behavior. All this aforementioned software seeming doesn't have
anything in common. The only known upgrades that do not appear to trigger the issue are Firefox and Chrome (where upgrades happen more or less in passive fashion) There is no clear event that I can recall in the past that I can attribute this happening
to (i.e. I can't pin point to something like installing a driving and it failing immediately afterwards) - just one day a message popped up to upgrade iTunes, which I did, and then rebooted to experience the issue.
Here are the steps to describe what happens with a bit more detail and troubleshooting steps tried:
Manually launch upgrade of an existing software. (Tried Evernote, iTunes, Java VM)
Successfully go through the install/upgrade. Seems irrelevant if software asks for reboot or not. Machine works fine until rebooted.
Reboot the machine. Machine shuts down without any issues.
BIOS POST is successful, and Dell logo with jumping/circulating dots comes up.
There is a normal flurry of hard-disk activity for a few seconds, which after a few seconds reduces to none or sometimes/occasionally to very brief flashing a few seconds apart. This is where the problem is noticed. It can stay like that for
hours if not days (normal boot takes about 20-30 seconds).
Typically, if there is no hard-disk activity at all, pressing the power button causes one brief flash, followed by one more about 1-3 seconds later, and no change.
The only recourse is to force turn off by holding power button for few seconds.
Letting it try to boot again leads to the same behavior.
Repeating attempts to boot 3-4 times causes Automatic Recovery to kick in.
The only way to get the machine to boot again is to use Recovery to restore to a previous state. This sometimes requires to be done more than once and doesn't fix on the first try.
(Also, I enabled Win boot menu, and couple of times instead of waiting for Automatic Recovery to kick in, tried to use recovery through the menu - in that case it's more likely to require the procedure to be done more than once).
I tried to do a logged boot to capture log file in one of the cases where it boots - it appears to never produce \Windows\ntbtlog.txt file (possible I didn't do something right for this one, though I thought that file is never deleted and only grows)
Additional Info: SysRestore currently displays only two available points:
6/13/14 - Installed Evernote v. 5.4 - Type Install
6/9/14 - Automatic Restore Point - Type System
All other previous restore points (from having installed a few more updates and software in the 1.5 years I had the machine) are gone somewhere.
Choosing to revert to the second restore point (when selecting restore point from boot menu) as opposed to the first one and later booting successfully, for some reason the same restore points are listed again (so it doesn't seem to be truly reverting)
Nothing fruitful appears in the EventLog. The only critical messages that i see there are both from SCM and one reads "The Dell Digital Delivery Service service terminated unexpectedly. It has done this 1 time(s)." and the other "The
system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." (which is expected). And there is a warn level entry about some Bluetooth device not being
able to enter power save mode. That's it for system event logs.
At this point I'm totally stuck trying to figure this one out, or even trying to figure out how to obtain information on where it gets stuck. This is worse than having a BSOD as with BSOD at least there is some info on what's happening. Here
I don't even see where it gets stuck or what's preventing from booting successfully.
Please help!!!

Here is the link to the SrtTrail.txt file:
http://1drv.ms/1sh7rCy
Again, let me clarify the situation as well as provide some additional information that I discovered since original post. Per original post - I can boot into the system up and until installer gets activated either by trying to uninstall or upgrade
existing software or install new one. At the time, the only way I could get the system to boot again was to let it fail boot twice and on the third attempt let it perform system restore from a restore point, and then it would boot again (with all the
installed/updated/uninstall changes wiped out)
Since then I discovered the following additional behavior points:
I managed to get it to accept couple of software upgrades by using roughly the following steps: let it fail boot twice. On the third attempt instead of choosing system restore I instead cancel or choose advanced options (depending on what it offers).
Typically it goes either through some system analysis or disk check for errors - wait and it doesn't find anything. When presented with a menu of other recovery options (like changing UEFI, command prompt, etc), I simply choose to exit and continue loading
windows. At this point it sometimes (I'd say 1 out of 3 times) manages to boot successfully, retaining all the changes (i.e. retaining software updates and the like). If it doesn't succeed booting, repeat until it does. Using these steps
I managed to update most of software so far, including windows update. But each time it's a struggle to get it to boot again.
Simply rebooting the system without any changes succeeds most of the time. However, today I noticed that a plain reboot (without any installer/uninstaller/update or any other system/soft/config changes) doesn't always succeed, requiring the same process
as in previous bullet point to get it to boot again.
I also noticed an additional behavior - my keyboard an mouse have some buttons that are illuminated (on dell keyboard those are media buttons, and on the dell mouse it is mouse sensitivity indicator). I noticed that when windows boot up, the keyboard and
mouse lights go out simultaneously. If they come back about a second or two later (with one flicker in between), then system boots up fine (the moment they come back, the system displays the logon screen with the seatle space needle). However,
if they don't come back, then the boot will hang there for ever. Is it possible that some driver sometimes succeeds to be loaded correctly, and sometimes fails to load causing Windows to perpetually wait for that driver to finish loading (which it never
does)? If that sounds like a possibility, how can I find out what is it that windows is doing when it starts to perpetually wait for whatever it is waiting for? Tell me what logs would help to understand that and how to capture those!
Also note that I run Avira Antivir antivirus (ever since I got this PC), and it doesn't flag anything suspicious on the system. I also ran MalwareBytes scan which found no suspects, as well as GMER rootkit scanner (which as far as i can tell, also
did not find anything suspicious).
There is another oddity that is going on with the system - may or may not be related, so mentioning just in case it is - which is that I'm using Dropbox, and it keeps creating "My Videos" folder on the Desktop, even though it is way outside of my dropbox
root. Deleting the folder doesn't help as the moment I right-click on the Desktop, it re-appears. It, oddly enough, also appears in C:\Users\{profile} folder right along side real "My Videos" folder. Looking properties of both in explore
shows in the property pages that one is located in C:\Users\{profile} and another in C:\Users\{profile}\Desktop (and again, yet both of those explore shows in C:\Users\{profile}). Like I said, not sure if these are related (I suspect not, but who knows),
so mentioning just in case.
Note that I'm trying to fix it without going through refresh or reset since the first one would cause the pain to reinstall of all the software on the system (without any indication that this would solve the issue), and the later option would just completely
wipe out everything off of the system, which is even more painful, and again would not guarantee solution (e.g. if it is a bad driver that would get reinstalled anyway after wipe. Yes, I technically do have backups, but those are more for drastic case if my
harddrive crashes, and wouldn't want to rely on those to voluntarily wipe the system due to odd behaviors - too painful and time-consuming. I'm looking for a solution to problem rather than just-start-from-the-beginning-because-it-is-easier approach.
Thanks, let me know how to get the troubleshooting info to get to root cause.

Do I have to upgrade my software when updating from 10.3.9 to Tiger?

I have pretty much the latest versions of all my software, as far as 10.3.9, anyhow. Mostly, I used Adobe and Macromedia programs, and I use Eudora (I have the latest one- 6.2 - I know they've stopped updating it.)
Also, I still use my Classic environment fairly often... for certain reasons I want to be able to continue using a few old items on this computer. At some point, I'll get another Mac with all the latest and greatest, but this one I need to keep and use the way it is.
The reason I'd put Tiger on it, is because so many things these days need at least 10.4 to run. Including the very latest upgrades for my Adobe software. I go back and forth on whether the possible disrupiton is worth gaining the ability to use more currently available "stuff" that needs 10.4+.
So... I can't seem to find any specifically notes stating that my system 9 software will be okay and run all right in tiger's classic environment, nor whether the programs I use, e.g. Adobe Creative Studio and the DreamWeaver Studio group, will be okay with this update. I hope, too, that things like Eudora, PopChar, Suitcase, etc, will be all right. I will probably update some programs gradually, but am hoping I won't actually HAVE to just because of installing 10.4.
I'll clone my hard drive etc, before doing it, of course...
But, anyway, does anyone have experience of making this change this way, maybe upgrading their software later but not having to do it right away?

Welcome to Apple Discussions.
It is worth doing the upgrade to Tiger. Most or perhaps all your Classic applications will work OK. I still have Tiger & classic works well. You will need the appropriate Tiger retail installation dvd. After installation do all the upgrades. I suggest if the Tiger version you get is less than 10.4.11 that you download the Combo 10.4.11 update from Apple downloads. Then use Software Update to check for any other updates needed. You should run Disk utility after each upgrade and correct permissions.
Neville

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

Bluetooth connection problem since upgraded Centro software to 1.07 spnt

I upgraded to 1.07 spnt and now when i connect via bluetooth the phone doesn't work. Right when i turn my bluetooth headset off, the phone works again.
I once again upgraded the software, and then I paired it with my bluetooth before i added any of my contacts, calendar, and everything else, and it worked perfectly.
What do you think is going on?
Post relates to: Centro (Sprint)

Are you having the same issue after you sync the phone to the PC?
Post relates to: Palm i705

Getting Java error while connect BEx query to WebI report (SAP BI4.0 )

Not able to connect BEx query to WebI report (SAP BI4.0 ) . Below is the error I get while creating a new BEx connection to BOBJ WebI report .
Please find the below error and help me ,
"Select a BW Bex query window box " displayed "Nothing to display " and server error as mentioned below
Java.uti.concurrent.executionException: Com.sap.sl.sdk.repository.service.repositor******
at Java.uti.concurrent.futuretask (Unknown source )
at java.swing.swing.timer.fireactionperformed(Unknown source )
at java.awt.event.invocationEvent.dispatch(Unknown Source)
Thanks ,
Pradeep Gorpadu

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

I upgraded the software on my iphone 4 and now it's downloading every email message from all my accounts (all previously read). 200 at a time. Manual delete is a problem since there are 3500. Suggestions?

I upgraded the software on my iphone 4 and now it's downloading every email message from all my accounts (all previously read). 200 at a time. Manual delete is a problem since there are 3500. Suggestions?

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

Error code: 12017 - I cannot upgrade my software t...

Hello,
I use Nokia Suite 3.2.100 and Nokia E52. Nokia Suite found a newer version of software for my E52. Downloading complete succesfully, creating backup before installing also, than I see - "Preparing for installation" and after few seconds appears a message with na error code: 12017 ("there was a problem with Nokia Suite. Try to do it again later. Reinstall Nokia Suite if problem will show again" - this is my translation from polish language).
I already use this version of Nokia Suite to upgrade my phone software and ther was no problem. I didn't do anything with my laptop since that time. Phone works ok, laptopo also, other functions of Nokia Suite also.
Thanks for help in advance!

Hello,
Sorry for very late response - It was very busy time at work for me...
I prepared a log file for you doing the same things as before but right now I could upgrade my software on E52... Very strange, because I didn't do anything special before last time, apart from Windows updates. I cannot help sending a log file and I'm happy that I finally upgrade my phone software, but in my opinion problem still exist (according to other post on this forum).
I will try to do an upgrade on my other phone Nokia 5230 and see what's happen.
Anyway - thanks a lot for help and your time!
Have a nice X-mas time!

HT2305 have a notebook running 10.5.8 - should I upgrade the software or buy another computer?

Have a macbook runniing osx 10.5.8 should I buy a new computer or upgrade the software?

That's your choice. Without know what your exact model is here is the upgrade path for OS X:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
If your model is a plastic housed MacBook then I would buy a new computer. If you have a model from Late 2008 or later, then it's a matter of just how old it is. The last MacBook was in 2010, and that model would run Mountain Lion OK. Prior to that I would stick with Snow Leopard.

I want to upgrade the software for my ipad.

i have tried to upgrade the software on my ipad. i am getting a message that there is not enough memory on this computer. i can only imagine it means on drive C, as they are right thereis not enough memory on drive C. there is however more than enough on the other two drives. is there some way of telling the upgrade program to use a different drive. i have tried to re-install itunes on drive D, but i am getting an error message that the file : 179708-17969.msi is missing in the temp folder and the install aborts. can any one please help

Check the link below.
http://eshop.macsales.com/shop/apple/memory/iMac

I phone not working after upgrading the software

I am having an unlocked model Iphone which was presented to me by a friend who lives in USA. Since I am in Sudan, I started operating it in Khartoum and was working OK. Now recently, when I connected my Iphone to Itunes, there was an option to upgrade the software, and so I did it. After successfully upgrading the latest version of software, My Iphone does not support the carrier sim card. Now I want to go back to my previous version of software. What should I do now?

I'm sorry but no one here can help you. The TOU of these forums does not allow discussion of fixes for hacked phones. You'll either need to contact whoever did the hack or use Google to find alternate help.

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

SAP R/3 Upgrade to ECC 6.0 - Protection of BSI data

Hello,
We are upgrading SAP R/3 to ECC 6.0. We have BSI and Vertex installed and functional in the landscape. I have 4 queries, seen below.
1- During a SAP R/3 Upgrade, BSI product leaving the .exe directory u2013 what are the steps that he needs to taken, so that they donu2019t get overlaid over during the upgrade?
2- Does SAP provide anything to protect (BSI)?
3- Does SAP provide anything to protect (VERTEX)?
4- What action should be taken on BSI and Vertex during R/3 Upgrade? Is there a checklist or document?
Thanks for help in advance.

> 1- During a SAP R/3 Upgrade, BSI product leaving the .exe directory u2013 what are the steps that he needs to taken, so that they donu2019t get overlaid over during the upgrade?
Create a file "protect.lst" in the kernel directory. The programs listed within are not deleted then. Neverless, take a backup of the kernel directory.
> 2- Does SAP provide anything to protect (BSI)?
> 3- Does SAP provide anything to protect (VERTEX)?
> 4- What action should be taken on BSI and Vertex during R/3 Upgrade? Is there a checklist or document?
>
See you other (almost identical query):
Protection of Key SAP HR tables in SAP R/3 Upgrade
Markus

Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??

Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??

Try here:
iOS: Troubleshooting backup issues in iTunes

SAP BI4.0 upgrade right software

Similar Messages

Maybe you are looking for