SAP BPC 5.1 Installation

Hi
When i am trying to install the SAP BPC 5.1 for SAP OFFICE CLIENT CONSOLE ......
Its Shows Some Error :
An Error (-5006: 0x80070005) has occurred while Runnning setup
Please make sure you have finished any previous setup and closed other applications .
if error still occurs .please contanct your vendor :sap (##ID_STRING11##)
Error Code : -5006: 0x80070005
Error Information :>setupnew\setDLL.cpp(841)
Papp : SAP Business planning and Consolidation for office client
Please
Regards
Dayalan M

I suggest to perform the follow steps:
1. Do a client Diagnostic from Client Software Page and make sure everything is green and you have all prerequisite software installed.
2. Make sure you are connected into you PC with an user which is administrator. Otherwise you are not able to install BPC client.
3. Open Add Remove programs and make sure you don't have a previous installation of SAP BPC. Any other version later than 5.x must be removed to be able to install BPC 5.x client.
4. Restart your computer and try to install again BPC client from Client Siftware page in case if you validate steps 1,2,3.
Regards
Sorin Radulescu

Similar Messages

SAP BPC 7.5 Installation Error

Hello All,
We got a requirement to install the SAP BPC 7.5 on top of fresh machines with SAP BI 7.02 for our customer. As a part of installation and configuration process i have downloaded the SAP BPC Patches and installed on top of BI 7.02 with enhancement pack 2. created a new apshell Apshell whcih is default. the server was included in a DOmain XX. I also craeted the Dot Net server with domain user and which was included in admin group successfuklly. i was able to see the dot server manager diagnoistic green and successful. Now the real confusion starts.
1. After installation of BPC DOT NET server on Windows 2003 server wich was already included in the domain now when i ca access the server http://localhost/osoft which is taking me to the screen sap bpc console and givig me a couple of options like
1.Interfact to word
2.interface to powerpoint
3. Interface to excel
4.Interface to web
5.Administration
when i click on administration it is taking me to second screen where it is askig me to select Appset in a small popup windows. There i dont have any popup to select where as it is leading to empty screen where there is no popup. when i click on ok then it will lead to again the main screen it have all the options interface to word,powerpoit etc..,
I am really confused where i am missing ad whether i need to do anything else more for the same.
I also see lot more in the installatio guide like select apshell.db9 etc where i am unable to see that option. i no where saw the file with name apset. I also saw in the some blogs and installation guide saying that to select the option install on top of mssql2005 where as i didnt see such an option anywhere.
Can any one guide me o this where and what i am really missing.
Edited by: Hemanth Kumar on Dec 25, 2010 5:18 PM

Hi,
This is one of the most common error I encountered during my recent BPC Project . This can be solved by the following ways.
1.Please check the authorizations ( make sure to have full admin authorizations for the Apshell) .
2.Make sure to Re- install both admin & client tools (check the Diagnostics and uninstall re-install both admin & client tools once.)
Regards
CSM Reddy

SAP BPC 7.0 Installation : Processing of dimension

Hi All,
i have installed the SAP BPC 7.0 M , after installation i am able to create application set , application , set security and full optimise the application.
but when i try to process dimesnionm i get the following error.
" there is no data in Mbr table : Processing fail".
but in the excel sheet we have dimesnionmembers

What if you have this issue on 7.0M SP4 and you're still on SQL Server 2005?
I'll be less than impressed if someone tells me to upgrade to 2008 as well.

SAP BPC 7.0 Installation fail

Hi All ,
i completed the prerequiste installation ( windows server 2003 , asp.net 2.0 , sql 2008 sp1 ) for SAP BPC 7.0 on single server environment ( 64 bit machine)
when i click on the very first step for BOC Installation i get the following error
setup.dll fail to install when we proceed with BPC installation.

Hi Ashok,
If you have know how to solve the issue, Please reply back with the steps.
I am exactly having the same issue that when I try to install the app, I get the setup.dll failed to Register error.
I am trying to install BPC 5.1 on the MS environment and we are on the 32 bit operation system.
Thanks
Sandeep

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

Installation of SAP BPC 10.1 Unified on top of HANA in Amazon Cloud

Hi Experts,
I need to install SAP BPC 10.1 Uified on top of HANA in amazon Cloud. Could you please give me Complete guidelines for pre and post steps.What are HANA ONE supported OS flat-form in could.please help me for this
Thanks
J Jana

Hi Andy,
Thank you for your support.
Note : My SAP system is AWS free server of AS ABAP 7.4 SP5 incl. BW on SAP HANA SP7,it will get BPC 10.1 unified version by default or not.if it will get how i will access.
We have done chapter 2 and 3 every thing in installation guide, but EPM add-on didn't installed.
IN SICF that services i didn't find out.is there any other post steps for getting this services.so please help me.
Thanks
J Jana

SAP BPC 5.1 multi-tier installation

We are implementing SAP BPC 5.1 as a multi-tier installation with 2 Windows servers.
Server 1 - SQL Server 2000 Database , OLAP & Reporting Services
Server 2 - Web / Application & Fileshare
Are there any issues that i need to be aware of with a multi-tier install ?
Service-level accounts for BPC - Do these accounts need to be the same between DEV and Prod. The install giude do not seem to indicate that these accounts have to be the same, however I just want to confirm
We did a trial installation and I get the following error :
Job name : http://wdsectest01vm/osoft/Launch.aspx
Detail : Unable to generate a temporary class (result=1). -- error CS2001: Source file C:Tempa71qdytz.0.cs could not be found -- error CS2008: No inputs specified --
Any help will be greatly appreciated
Thanks
Subha

Hello Subha,
You can test the PTR dns records using nslookup.
I will use db.example.com and app.example.com as the fully qualified domain names below.
Open a command prompt (Start -> Run and type cmd) and type the following
nslookup
app.example.com
note - this should return the ip address of the application server and represents
the host (A) record in DNS. Lets assume it returns an ip of 1.1.1.10
set type=PTR
1.1.1.10
note - this will return the reverse lookup (PTR) record for the ip address and
in this example should resolve to app.example.com
exit
After you complete the nslookup for the appserver do the same for the database servers fqdn (db.example.com).
You should perform this test on each tier. If you run into any inconsistencies then your network/DNS administrator should be able to assist you in getting the appropriate records created.

Questions on Installing SAP BPC NW 7 SP2

Hi Friends,
My company is Installing SAP BPC NW 7 SP2 and I am heading the project starting from 1st June. I have downloaded the Installation guide and still have few questions
1) On which client we deploy BPC server component, I mean on 000 or any other.
2) Initially we are doing on Sandbox, so we are using only one system for both ABAP and NET servers and we are using 64bit machine. How do I run 1.1 Net framework on it, I have read installation guide it says configure to WOW6432 but dont know how to do it
3) When we download the ABAP server component what format will it be .SAR or .CAR or any other
Please do reply.
Thanks in advance
Bobby

Hello Bobby,
1. You will install the BPC server component with SAINT, which has to be executed in client 000, but BPC will actually run in the client you designate for BW.
2. The following article discusses configuring ASP.NET 1.1 to run in 32 bit mode on a 64 bit system [http://support.microsoft.com/kb/894435]
3. The ABAP server component will be a SAR file.
Thank you,
Daniel

Upgrade to SAP BPC 7.0 with cluster system (Front-End & Back-End)

Hello,
I have to do an upgrade document about an outlooksoft 5.0 SP2 to SAP BPC 7.0 SP4 in a cluster system.
It has 2 front-ends (IIS cluster windows) & 2 back-ends (SQL Cluster).
We are going to do first the migration in 1 node, and then in another. The first upgrade in the first node I understand. I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then restore the backup of the Appset, and do the posts upgrade action of the Dimension TIME.
But in the second, what do we do??? I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then what??? Do I have to restore the backup of the Appset again???
I need help.
Best regards.
Pablo Mortera.

Hello,
On the second cluster node, you have only to install the software, nothing related to the appset. If you alreay run the migration stepts for the appset, all the information are into daatbase and file server.
However, the normal behaviour is to make the installation on the both nodes, make the basic tests to validate the installation and then proceed with the appset migration.
Best regards,
Mihaela

SAP BPC 7.5 Client, Silent install but with progress bar, can it be done?

Hi All,
I need to uninstall the BPC 7 Client and then deploy 7.5 to around 250 users accross the country.
We have SCCM (SMS) in place so will be using that.
I have the uninstall of 7 sorted and I have the response file etc sorted for the silent install of 7.5 and the install runs, silently, no issue.
Is there a way though that one can "turn on" the progress bar during the install? So that users dont shutdown or disconnect in the 15min it takes the install to run.
By way of example, in the SAP Business objects enterprise client on can configure the Silent install so that although it never prompts the user for a reponse there is a progress bar that runs, indicating that there is an install in progress.
Thanks in advance,
Bryan

Hi Sebastian,
No worries, I am using a pop up countdown so the users have some idea on progress. Would love to know why the install runs for over 15min.
In the above case the uninstall was easy as we had deployed using MS AppV so it was just a case of deleting the advert in SCCM and the application was pulled from the users desktops.
For 7.5 I am using a vbscript with following to uninstall:
The install string pulled from the clients registry uninstall folder:
RunCommand Chr(34) & "C:\Program Files\InstallShield Installation Information\{EC8753EF-EE78-48B5-A4D0-FBBD237B5D53}\setup.exe" & Chr(34) & " -runfromtemp -l0x0009UNINSTALL -removeonly"
We create a custom link, so this deletes it.
DeleteFile "c:\Users\Public\Desktop\SAP BPC 7.5.lnk"
You should be able to create something similar for 7.0 & 7.1
Hope that helps,
Bryan

SAP BPC 7.5 to BPC 10.0 upgrade, problem CPMBPC_800

Hello,
We are currently upgrading BPC 7.5 to BPC 10.0. We want to do an upgrade of our existing BPC 7.5, and not an 'clean' installation of BPC 10.0.
Right now we are having some issues with the´basis part of the upgrade.
We have installed the POASBC 100_730 SP01 (POASBC ABAP component) with no problems
and now we want to install the EPM content in the download package 51040691 (Server components).
In the download package 51040691 - there are two folders 'upgrade' and 'installation'
The files have been uploaded into SAP BW 7.3 and the problem now is in 'saint' - we can see the CPMBPC_800 package, but the type is 'INSTALLATION' and there is not an option to choose 'UPGRADE'
Is 'INSTALLATION' the same as a clean installation - or will the package detect the existing SAP BPC 7.5 and do upgrade instead of an installation ?
All help is appreciated
Thank you,

Hello,
we are facing the same issue. Did somebody solve this problem? Is INSTALLTION the same as UPGRADE?
Kind Regards
Waldemar Brill

SAP BPC 7 APPSet Restore SQL 2005

Hi Everyone,
I have SAP BPC 7 setup in a multi-server environment, and it's working well. I created a dev environment, installed SAP in the same fashion, and now when I try to restore an app set through server manager in dev, it keeps putting the SQL DB on C instead of where it should go on I:\ .
The original app set was using this same drive configuration, and that backup/restore works fine -
I've gotten this to work before, but I can't seem to get the restore to go somewhere else this time...
Any thoughts appreciated -
Edward

Hi,
More testing today so let's share
There is 3 registry key in SQL Server 2005 :
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\MSSQLServer\DefaultData
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\MSSQLServer\DefaultLog
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\Setup\SQLDataRoot
Key #1 and key #2 are the one you configure in SQL server Manager and they correspond to the *.MDF directory and *.LDF directory.
Key #3 is the one you configure during SQL Server installation.
SAP Server manager will use key #3 when you restore an appset and also during the installation process of the ApShell.
Key #1 and Key #2 are used by BPC setup to create the AppServer database.
So to conclude : Even if you change Key #3 value in order to change the directory where you want to create your DB files, you will not be able to put *.MDF files on a different folder (directory) thant *.LDF files. Which means that after each AppSet restoration you will have to manually move at least the *.LDF or *.MDF file. I think this can be scripted with a T-SQL command... But you will have to do it.
On a side note, i tried to delete Key #3 (was hoping that it will use key #1 and #2) => This is not working. The AppSet restore will fail (in fact this is SQL Server who will throw an error).
Will ask my customer to open a case on SAP support, maybe it could be "fixed" one day.

BPC 7.0 installation error during creation Apshell db

Dear all,
I've tried to installed SAP BPC 7.1 on multi server environment (OLAP Server, Microsoft SQL Server, Microsoft SQL Reporting Services, Insight OLAP server in a windows 2003 64 bit server and Application server, File Share, Web Server in a w2003 32 bit server).
When installation start it goes fine until steps : "Create sample appset database".
Datbase AppServer has been created without errors (access to database server seems to be right with domain user used during installation).
The error is:
"Error (A file activation error occured. The physical file name 'Cannot open database "Master" requested by the login. The login failed .\DATA\ApShell.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.).
I've checked sql server log file and I've found this error:
2009-07-16 16:55:16.40 Logon       Error: 18456, Severity: 14, State: 16.
2009-07-16 16:55:16.40 Logon       Login failed for user 'SABAF\icms'. [CLIENT: 172.25.20.37]
2009-07-16 17:29:51.05 Logon       Error: 18456, Severity: 14, State: 16.
2009-07-16 17:29:51.05 Logon       Login failed for user 'SABAF\icms'. [CLIENT: 172.25.20.37]
2009-07-16 17:29:51.14 Logon       Error: 18456, Severity: 14, State: 16.
2009-07-16 17:29:51.14 Logon       Login failed for user 'SABAF\icms'. [CLIENT: 172.25.20.37]
2009-07-16 17:29:51.23 spid79      Error: 5105, Severity: 16, State: 2.
2009-07-16 17:29:51.23 spid79      A file activation error occurred. The physical file name 'Cannot open database "Master" requested by the login. The login failed.\DATA\ApShell.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.
2009-07-16 17:29:51.23 spid79      Error: 5105, Severity: 16, State: 2.
2009-07-16 17:29:51.23 spid79      A file activation error occurred. The physical file name 'Cannot open database "Master" requested by the login. The login failed.\DATA\ApShell_Log.ldf' may be incorrect. Diagnose and correct additional errors, and retry the operation.
It seems there was an error during login.
The installation log file is reported below:
Installation Date: 7-16-2009, 17:26:35
User Information: SABAF\icms
Server Information:
     BPC Version: 7.0.113
     SQL Version for BPC: 2005
     SQL Server: ERPSAKPPR01
     OLAP Server: ERPSAKPPR01
     Insight OLAP Server: ERPSAKPPR01
     Reporting Services Server: ERPSAKPPR01
     Application Server: ERPSABPC01
     Web Server: ERPSABPC01
     Data Path: E:\BPC\Data
Installation Status
     Diagnostics: Done
     File copy: Done
     Crypto-file[AmyuniPDF.exe] information: E:\CD_INST_BPC_7.0\AmyuniPDF.exe
     Crypto-file[XceedZip.dll] information: E:\CD_INST_BPC_7.0\XceedZip.dll
     Starting WWW Services: Done
     Configuring Internet Information Server: Done
     Install .Net assemblies in the Global Assembly Cache: Done
     Assigning COM+ Components: Done
     Create AppServer Database: Done
     Create Sample Database: Error
     Create Sample OLAP Database: Error
     Setup Management console: Error [There is already an object named 'sp_ActivePages' in the database.]
     Starting BPC Send Governor Service: Done
     Starting BPC Insight Service: SKIP
If I try to connect with SQL Server Management Studio with windows authentication (same user of installation) and permissions are ok.
Any idea ?
Thanks
Maurizio Manera

Hi Steven,
If this is the case, I think you would need to configure the access rights in your db security for BPC admin user. Hope this help you.Good luck

Upgrade SAP BPC 7.5 NW SP4 to SAP BPC 7.5 NW SP8

Hello,
I want to make an Upgrade from SAP BPC 7.5 NW SP4 to SAP BPC 7.5 NW SP8 and i need to know what are the consideration to make that.
Do you have any suggestion, link or information to get this activity?
Best regards

Hello,
As far as I know, you don't need to perform all configuration steps from SP04 to SP08 in ABAP tier, but it is good to check if everything is ok.
You can also check upgrade guide available at http://service.sap.com/instguidesEPM-BPC (choose 7.5 version for SAP NetWeaver).
Regarding Apshell: sometimes a few changes are made in the way things work in the backend (logic) and of course, some improvements also. These changes can be reflected in Apshell, so yes, every time you upgrade you must recreate apshell executing UJS_ACTIVATE_CONTENT as described in installation guide (also available at the above link).
If you have any problems during apshell activation in SP08, check this thread: Issues on Activating Apshell on BPC Netweaver 7.5 SP08
It is already available Patch 1 for BPC Client and for BPC .Net server, you should also consider applying it (release note is 1597464).
Hope it helps!
Debora

SAP BPC Management Console

Dear All, I have an installation of SAP BPC 7.0 SP7 Patch 1. On my Dev and Test servers, the Management Console works perfectly (they are both single server installations), but on the multi-server Production environment the web server part is not visible. The SQL, Analysis Services part work well, but I cannot get to see who's online and which aspx 's are active. The only thing that I can see for the web server part is the task manager part. I suspect a security setting or a specific service that is not started, but cannot find anything yet. The Event log on the web/application server only indicates that the WMI service was stopped, but nothing else. Has anybody else experience this kind of behaviour for the Management Console? Or does anybody know exactly which rights and permissions are needed and which services?
Thanks,
Manus Cornelius

If the ODBC logging is working correctly thatu2019s all that should be needed.
The MC reads the log tables to tell whou2019s online. By default it logs to BPCLog in AppServer.
If you open up BPCLog, it looks just like an IIS log.
You can check to see if there are records in the table.
There is a stored procedure in the appserver DB you can run, sp_WhosOnline, which should return data. If thatu2019s not returning data thereu2019s probably an issue with the logs.
Other steps to verify:
1. Make sure there is Login setup in security whose default DB is AppServer. Make sure under User Mapping that it's mapped to AppServer and has the roles of db_owner and public. Verify SQL is set up for Windows and SQL Server Authentication. Restart SQL services.
2. Verify IIS under the Web Site tab, logging is set to ODBC logging. Click the Properties button and make sure the DSN is set to BPC_ManagementDSN, the table is BPCLog, and the username and password are those of the SQL login user you set up before.
3. Make sure IIS Directory Security>Authentication and access control is set to Basic Authentication
4. Set the Application Pool of the virtual directory 'Management Console' is set to BPC_ManagementAP
5. In ODBC Data Source Administrator, click the Configure button with the BPC_ManagementDSN selected. Go through the wizard, verify it is using "SQL Server authentication with login ID and password" and input the username and password for your SQL login user.
Good luck!
Brian
SAP BPC Support North America

SAP BPC 5.1 Installation

Similar Messages

Maybe you are looking for