SAP cannot start
Hello,
I just did a system copy on a sandbox,
and when trying to start SAP I get the following:
startsap
Checking SID Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.95 700 - AIX v11.65 5L-64 bit 090118
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 3342808) is already running .....
saposcol already running
Running /usr/sap/SID/SYS/exe/run/startdb
Trying to start SID database ...
Log file: /home/sidadm/startdb.log
/usr/sap/SID/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
LISTSNER:
lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Production on 14-SEP-2011 18:48:18
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SEC.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Production
Start Date 14-SEP-2011 18:45:09
Uptime 0 days 0 hr. 3 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/SID/102_64/network/admin/listener.ora
Listener Log File /oracle/SID/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=SID.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=SEC)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sdfr340)(PORT=1527)))
Services Summary...
Service "SID" has 1 instance(s).
Instance "SID", status UNKNOWN, has 2 handler(s) for this service...
The command completed successfully
LOG:
Wed Sep 14 19:00:39 CUT 2011
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/SID/SYS/exe/run/startdb: Terminating with error code 12
R3trans -d
This is R3trans version 6.14 (release 700 - 23.07.10 - 09:23:00).
unicode enabled version
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SID/SYS/exe/run') or dbms_type ('ORA')"
R3trans finished (0012).
Can you please advise ?
Thanks in advance,
J
Edited by: Jordy_tof on Sep 14, 2011 9:03 PM
Edited by: Jordy_tof on Sep 14, 2011 9:06 PM
Moderator message - Cross post locked
Rob
Similar Messages
-
SAP cannot start Oracle after Upgrading to 10g
I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size 2199816 bytes
Variable Size 2025713400 bytes
Database Buffers 503316480 bytes
Redo Buffers 2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati -
Cannot start SAP B1 DI Proxy Service
Hi,
After i restart my machine, my SAP B1 DI Proxy Service cannot start.
Even i go to services.msc to start this DI Proxy Service manually, a message appear as per below :
" The SAP Business One DI Proxy Service service on local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs"
Please advice how to start this DI Proxy Service ?
Thanks a lot.
Regards
SamYou do not have to re-install everything. It's enough to run the integration package from your installation media and it will perform an repair.
You might need to re-activate the mobile package if you are using that one after the repair is finished.
Br
Anders -
Cannot start SAP XI - Integration Respository and Directory
Dear Expert,
Some of developers cannot start Integration repository and directory at his/her client. It still running after logon with "PISUPER" user.
Do I missing some necessary applications on the clients?
Please advise.
Thank and regards,Thanks for your answer, Alexander Bruch,
I think the host name is no problem because the Integration Builder page can be started with URL "http://iwdfvm2160:51000/rep/start/index.jsp" and also prompt me the logon window. But after input the user/password, normally is PISUPER, the logon window is running for a long time, nothing happen.
We also using user PISUPER and it's fine with another laptop.
Regards,
Kobsak -
Urgent: cannot start the shadow instance at phase STARTSAP_TRANS
We are upgrading to NW2004s (ABAP only) from 640.
<u><b>How to re-start the shadow instance?</b></u>
At this point, <b>anyway we cannot start the shadow instance.</b>
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
<b>The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]</b>
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
<b>The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]</b>
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:20:45 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since Mar 22, 2007 1:20:49 PM
> MOUNT POINT 12 = D:\D12\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 23 = D:\D23\51032247
> MOUNT POINT 18 = D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
> MOUNT POINT 15 = D:\D15\NW_2004s_SR2_Upgrade_Master
> MOUNT POINT 09 = D:\D9
> MOUNT POINT 14 = D:\D14\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 01 = D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 08 = D:\D8\SAP_CRM_5.0_SR2_Languages
> MOUNT POINT 20 = D:\D20\NW_2004s_SR2_Languages
> MOUNT POINT 03 = C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 06 = C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 10 = D:\D10
> MOUNT POINT 17 = D:\D17\51032257
> MOUNT POINT 21 = D:\D21\NW_2004s_SR2_Languages
> MOUNT POINT 19 = D:\D19\51032257
> MOUNT POINT 05 = C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 04 = C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 11 = D:\D11\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 07 = D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
> MOUNT POINT 24 = D:\D24
> MOUNT POINT 02 = C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 22 = D:\D22\NW_2004s_SR2_Languages
> MOUNT POINT 16 = D:\D16\BS_2005_SR2_SAP_Installation_Master
> MOUNT POINT 13 = D:\D13\SAP_CRM_5.0_SR2_Installation_Export
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:24:47 PM
> cancel
Connection to SAPup was closed
Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:28:34 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
Reading data from "Upgrade Master CD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:43 PM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:50 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:28:54 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:28:56 PM
> Parameter input initial yes
You selected the following PREPARE modules:
Parameter input
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since Mar 22, 2007 1:28:59 PM
> execute
Execution of PREPARE module Parameter input begins at 20070322142901
>> 14:29:01 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 14:29:01 PREPARE: END OF PHASE BEGIN_PRE
>> 14:29:01 PREPARE: START OF PHASE KEY_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 961511
? SAPup keyword =
Waiting for input since Mar 22, 2007 1:29:02 PM
> SAPup keyword = 19327784
>> 14:37:23 PREPARE: END OF PHASE KEY_CHK
>> 14:37:23 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
Done.
>> 14:40:10 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 14:40:10 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:40:10 PM
> INSTANCE NUMBER = 59
> SAP SYSTEM HOST = damascus
> SAP SYSTEM ID = ADC
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since Mar 22, 2007 1:43:59 PM
> DATABASE HOST = damascus
> DATABASE ID = ADC
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since Mar 22, 2007 1:44:03 PM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since Mar 22, 2007 1:44:14 PM
> BATCH HOST = damascus
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since Mar 22, 2007 1:44:16 PM
> R3TRANS PROCESSES = 3
> MAXIMUM SYNC TIME = 120
> MAXIMUM UPTIME PROCESSES = 1
The password for Operating System account .\SAPServiceADC:
? PASSWORD =
Verification of the password for Operating System account .\SAPServiceADC:
? PASSWORD =
Waiting for input since Mar 22, 2007 1:44:19 PM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 14:44:43 PREPARE: END OF PHASE INITPUT_PRE
>> 14:44:43 PREPARE: START OF PHASE DBCHK_PRE
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since Mar 22, 2007 1:44:45 PM
> no
>> 14:44:49 PREPARE: END OF PHASE DBCHK_PRE
>> 14:44:49 PREPARE: START OF PHASE CONFCHK_IMP
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:44:50 PREPARE: END OF PHASE CONFCHK_IMP
>> 14:44:50 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since Mar 22, 2007 1:44:50 PM
> continue
? SAP Solution Manager Key =
Waiting for input since Mar 22, 2007 1:44:53 PM
> SAP Solution Manager Key = 12D8B10981
>> 14:45:14 PREPARE: END OF PHASE SOLMAN_CHK
>> 14:45:14 PREPARE: START OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: END OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: START OF PHASE HIAV_CHK
>> 14:45:14 PREPARE: END OF PHASE HIAV_CHK
>> 14:45:15 PREPARE: START OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: END OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: START OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: END OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: START OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: END OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: START OF PHASE INIT_CBU
>> 14:45:15 PREPARE: END OF PHASE INIT_CBU
>> 14:45:15 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20070322144515
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Parameter input' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:45:15 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:45:23 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:45:26 PM
> Initialization initial yes
You selected the following PREPARE modules:
Initialization
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:45:30 PM
> execute
Execution of PREPARE module Initialization begins at 20070322144532
>> 14:45:32 PREPARE: START OF PHASE INITCURENV
>> 14:45:32 PREPARE: END OF PHASE INITCURENV
>> 14:45:32 PREPARE: START OF PHASE DBCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:45:34 PREPARE: END OF PHASE DBCHK_INI
>> 14:45:34 PREPARE: START OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: END OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: END OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: END OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: START OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: END OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
>> 14:46:00 PREPARE: END OF PHASE DBCONNCHK_INI
>> 14:46:00 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: START OF PHASE UCMIG_DECISION
Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
Upgrade and Unicode Conversion.
In this case, several of the migration preparation steps can be done already on the start release
or on the upgrade shadow system.
For further information, please refer to OSS note 928729.
Do you want to perform a combined Upgrade and Unicode Conversion?
? Yes
? No
Waiting for input since Mar 22, 2007 1:46:06 PM
> No
>> 14:48:04 PREPARE: END OF PHASE UCMIG_DECISION
>> 14:48:04 PREPARE: START OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: END OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: START OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: END OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: START OF PHASE INTCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
>> 14:48:15 PREPARE: END OF PHASE INTCHK_INI
>> 14:48:15 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 14:50:38 PREPARE: END OF PHASE ADJ_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: END OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: END OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: START OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: END OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: START OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: END OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 14:50:38 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 14:50:39 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 14:50:39 PREPARE: END OF PHASE SPACECHK_INI
>> 14:50:39 PREPARE: START OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: END OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: START OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: END OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: START OF PHASE EXECCV
>> 14:50:44 PREPARE: END OF PHASE EXECCV
>> 14:50:44 PREPARE: START OF PHASE EXECAV
>> 14:50:50 PREPARE: END OF PHASE EXECAV
>> 14:50:50 PREPARE: START OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: END OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: START OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: END OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: START OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: END OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: START OF PHASE ADDON_SPEC1
>> 14:50:55 PREPARE: END OF PHASE ADDON_SPEC1
>> 14:50:56 PREPARE: START OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: END OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: START OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: END OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: START OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: END OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: START OF PHASE ACE_CHK
>> 14:51:01 PREPARE: END OF PHASE ACE_CHK
>> 14:51:02 PREPARE: START OF PHASE CRM_BILL
>> 14:51:02 PREPARE: END OF PHASE CRM_BILL
>> 14:51:02 PREPARE: START OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: END OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20070322145102
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Initialization' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:51:02 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:51:41 PM
> continue
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:51:41 PM
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:58:46 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:58:53 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:58:56 PM
> Import initial yes
You selected the following PREPARE modules:
Import
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:59:00 PM
> execute
Execution of PREPARE module Import begins at 20070322145902
>> 14:59:02 PREPARE: START OF PHASE REQIMPORT
The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:59:02 PM
> continue
>> 14:59:05 PREPARE: END OF PHASE REQIMPORT
>> 14:59:05 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
Trying to find archive files ...
Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
>> 14:59:40 PREPARE: END OF PHASE READDATA
>> 14:59:40 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
>> 14:59:41 PREPARE: END OF PHASE READDATA_EXT
>> 14:59:41 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
>> 14:59:42 PREPARE: END OF PHASE TOOLFIX_CHK
>> 14:59:42 PREPARE: START OF PHASE CPYFIL0_CBU
>> 14:59:42 PREPARE: END OF P -
Hi,
Recently, my j2ee enginee cannot start dispacher and j2ee server always in yellow colour (Starting framework forever).
This is the error i got from server.log :
Thread[SAPEngine_EnquReader,5,main]##0#0#Error#1#com.sap.engine.core.locking.impl3.LockingManagerImpl#Plain###Encomi: failed to connect to demopj/3201/Connection refused: connect)#
The problem is the ABAP stact instance number is "00", supposed j2ee enginee connect to port 3200, why in this case connect to 3201 ? where i can chages that config.
Thank you in advance.
Best Regards
FernandHi,
We had this type of error in the past
we rectified that ago , I didn't remembered that exactly
Check with the DNS Server ......Some other Server Host name wil be attached to ur server
Follow the Error Log
Regards
Khanna -
MSCS for ECC 6.00 - Service settings, SAP not starting reliably
I have an ECC 6.00 installation on Windows 2008/SQL*Server in an MSCS environment that I'm trying to validate. (I didn't
install it so I don't know what was down as part of the install, and what was done after.)
On Node 1 currently, the SAP MMC shows FIVE instances running:
- PSAPERPPROD1 (02) - Local Central Instance
- PSAPERPPROD1 (10) - EnqueueReplicationServer
- PSAPERPPROD1 (11) - EnqueueReplicationServer
- SAPECCPRD (00) - ASCS
- SAPECCPRD (01) - ASCS
On Node 2 I see the following:
- PSAPERPPROD2 (02) - Local Dialog Instance
- PSAPERPPROD2 (10) - EnqueueReplicationServer
- PSAPERPPROD2 (11) - EnqueueReplicationServer
PSAPERPPROD1 and PSAPERPPROD2 are the physical names of Node 1 and 2 while the SAPECCPRD name is the logical name of the SAP
Cluster Service. Users signon to SAPGui using SAPECCPRD(02)
If I look in the Services Manager of both Node 1 and 2 I see that the SAPMEP_xx services are set as follows:
- SAPMEP_02 - Manual
- SAPMEP_10 - Automatic
- SAPMEP_11 - Automatic
What I'm experiencing is that if the three cluster services ("SAP MEP", "SAP_ERPDtc", and "SQL Server (MSSQLSERVER)") are all
running on Node 1, and Node 2 is rebooted, when Node 2 restarts, and I go into the Failover Cluster Manager and move the
resources from Node 1 to Node 2 (without signing onto Node 2), the SAP system does not start as the 02 instance on Node 2
hasn't started yet. IF I go into Node 2 and open the SAP MMC then the 02 instance will start and then the failover to
Node 2 will work correctly and the SAP system starts. If I don't go into the MMC first, then the 02 instance is down and
while the cluster appears to be started correctly you cannot sign onto SAP as there is no CI or Dialog instance running.
My questions are as follows:
1) Is this setup right? - something seems wrong, as I have to start the MMC before things work correctly
2) Should the 02 instances be set to automatic? - what other implications would this have in the case that this service
starts without the database started on the cluster.
3) Should the 02 instance somehow be added to the Cluster Service.
Comments would be appreciated.Be sure that you have the "TSW Active" flag set in IMG node:
Industry Solutions Oil & Gas (Downstream)
>TSW (Trader's and Scheduler's Workbench
>Basic Functions
>Specify TSW Control Parameters -
IDX5 - System is not a central XI; cannot start program
hi all -
Did anyone come across this error message - "System is not a central XI; cannot start program" when trying to execute the tcode - IDX5 on the XI box?
I pushed an IDOC - MATMAS05 from IDOC to XI. It doesn't come into XI.
1. I checked the SM58 on the R/3 side. No Messages.
2. I checked the IDX5 transaction on the XI side, that's when i get the above error message.
3. I checked the IDX2 transaction on the XI side, i get this error "I:000" - Anyone knows what it means?
4. SXMB_MONI doesn't show up anything.
5. R/3 - pushed idocs shows a status of 3.
Any ideas where to look for and how to solve the problem -IDX5 and IDX2.
Environment:
1. We are using SAP NW 2004s
2. SAP BASIS Component - SAP_BASIS - Release 7.00
Thanks in advance,
TirumalHi,
I think port configuration in IDX1 may be not correct,
Anyway check out this SAP note- 940313
Also refer this analysis:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
Moorthy -
Cannot Start SI4 After New License
I have a test drive version of NW 4 running on Suse 9.2 Linux and db2. It ran fine for 3 months. Yesterday I installed a new license because the old one expired. I installed it as root while the db was running.
This morning, I cannot start sap, because the database won't start.
The following is the output of R3trans. Can anyone give me any suggestions on things to try to resolve it?
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.10.2005 - 07:08:07
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:07 2005 148 0.000148
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 59 0.000234
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 57 0.000291
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 21464 0.021755
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 59 0.021814
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 59 0.021873
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 137 0.022010
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022090
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.022125
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 45 0.022170
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.022201
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.022238
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.022277
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 296 0.022573
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 31 0.022604
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.022631
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 36 0.022667
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.022702
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.022725
4 ETW000 [dev trc ,00000] Supported features: 22 0.022747
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 32 0.022779
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 38 0.022817
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 87 0.022904
4 ETW000 [dev trc ,00000] ..done 136 0.023040
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:08 2005 97739 0.120779
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 67 0.120846
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N No start database manager command was issued. SQLSTATE=
4 ETW000 46 0.120892
4 ETW000 [dev trc ,00000] &+*** 57019
4 ETW000 37 0.120929
4 ETW000 [dev trc ,00000] &+***
4 ETW000 36 0.120965
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.121002
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 49 0.121051
4 ETW000 [dev trc ,00000] &+***
4 ETW000 35 0.121086
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 23 0.121109
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 138 0.121247
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"
si4host:si4adm 77>
si4host:si4adm 77> db2admin start
db2admin: Command not found.
si4host:si4adm 78> db2admin
db2admin: Command not found.
si4host:si4adm 79> db2start
10/30/2005 07:36:36 0 0 SQL8000N DB2START processing failed; a valid product license was not found.
SQL1032N No start database manager command was issued. SQLSTATE=57019Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
I didn't have any luck. I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired. There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install. So, I gave up and just re-installed it. Oh well, re-installing is good practice.
Sorry I couldn't help you. -
SAP not starting after crash: Terminateing With error code 12
Hi,
After system crash SAP is not starting normally. When running startsap under SIDadm puts out: /usr/sap/TST/SYS/exe/run/startdb: Terminateing With error code 12
startdb.log shows that:
/oracle/TST/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shares object file: No such file or directory
I have checked - file and directory are present.
However - when manually starting DB under oraSID and then logging in as SIDadm and starting SAP - everything starts normally.
(Allthough SID is has been changed before - system also worked normally after SID change) I have checked userrights and groups , also profile - everything seems to be normal. Any ideas?
Edited by: Kristjan T on Mar 16, 2011 1:16 PMHi,
1.what UNIX Flavor are we talking about -> SuSe
2.What SAP Kernel Release is in place (may be 6.40 non EX2 ?) -> 6.40
3.What release is the DB suposed to have? -> 10.2.0.2.0 - 64bit Prod
4.I see, you are calling an sqlplus from a 10.2 ORACLE_HOME.
Is that the correct HOME the DB is running with ? -> Yes
5.Can you start the DB with
brconnect -c -u / -f dbstart -> NO
Error is:
:devadm 51> brconnect -c -u / -f dbstart
BR0801I BRCONNECT 7.00 (40)
oracleDEV: error while loading shared libraries: libskgxp10.so: cannot open shared object file: No such file or directory
BR0278E Command output of '/oracle/DEV/102_64/bin/sqlplus /nolog':
/oracle/DEV/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0279E Return code from '/oracle/DEV/102_64/bin/sqlplus /nolog': 127
BR0302E SQLPLUS call for database instance DEV failed
BR0303E Determination of Oracle version failed
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0804I BRCONNECT terminated with errors
(Different machine but same situation)
6.As already requested, what is the output of:
6.1.ldd sqlplus
:devadm 55> ldd sqlplus
ldd: ./sqlplus: No such file or directory
in addition:
6.2. env | grep -i ora
devadm 56> env | grep -i ora
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
dbms_type=ORA
dbs_ora_tnsname=DEV
dbs_ora_schema=SAPSR3
ORACLE_SID=DEV
ORACLE_BASE=/oracle
TNS_ADMIN=/usr/sap/DEV/SYS/profile/oracle
ORACLE_HOME=/oracle/DEV/102_64
SAPDATA_HOME=/oracle/DEV
6.3 env | grep -i nls
:devadm 57> env | grep -i nls
XNLSPATH=/usr/X11R6/lib/X11/nls
NLS_LANG=AMERICAN_AMERICA.UTF8
6.4 env | grep -i lib
devadm 58> env | grep -i lib
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
XNLSPATH=/usr/X11R6/lib/X11/nls
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig
GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0
GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
Any ideas???
Br,
Kristjan T. -
SBOers,
My registration used to work fine earlier. However, after a few install/uninstall of the add-on, now I cannot get my installer to start anymore.
Here are more details:
I have two VB.NET programs:
MyAddOn.exe
Installer.exe
1. Uninstalled the existing addon and deleted all the files under SAP Manage\...\AddOns directory.
2. Generated a new registration file.
3. Ran SBO client and registered the program. Selected "Force Install" from the addon administration UI. Registration goes fine.
4. Quick SBO client and ran it once again.
I get an error message "Cannot start the addon."
I have been playing around with various settings but no success yet. SBO client never runs my Installer.exe.
I have also tried to start the addon from the addon manager. No success there either.
I would appreciate it if someone can enlighten me on what could be going wrong.
Thank you in advance for your help.
PradeepAnother reason could be that the SAP client is not registered properly. I do not know why this happens, but we had it happen with four clients.
Addons in 2004 would install on other clients allright, but not on these four.
Here is how I got them to work (there is a SAP note out on this issue):
stop sap client
Open a Dos-Box
Change to folder Program Files/SAP Manage/SAP Business One
Execute: sapbouicom /regserver
restart sap client again
HTH Lutz Morrien -
Hi everyone,
I would like to install my add-on on a separate client pc. There was an error upon connecting my SAP Business One application to a server, with my add-on installed and connected. The error was "cannot start add-on" and the status of the add-on in the client is failed. How can we fix this error?
Thanks,
OmannCheck this links
Addon don't start
Cannot start an add-on
Error:AddOn [AddOn Name] can not start addon -
ERROR: password is router string,cannot start graphical screen painter
Hi Exprtts,
I remotely Login SAP at home and I want to edit the screen by screen painter. But the system pop-up a message : password is router string,cannot start graphical screen painter. But at office I can start the screen painter and edit the screen.
Any one can tell me why and how to solve this problem??Thanks in advance.
JoeDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly -
Fixbspflvr_nt64.exe cannot start or run due to incompatibility with 64-bit
Hello Folks,
Before doing an upgrade from DB2 9.5 FP 4 to 9.7 FP 2, when executed fixbspflvr_nt64.exe as per SAP Note 1332109 got
the following message:
"The program or feature fixbspflvr\fixbspflvr_nt64.exe" cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows copatible version is available"
We are using AMD64 hardware. Did some one had the same issue and got resolution, please share...
Thanks,
ShyamHi Shyam,
Did you get any solution from SAP?
I am facing the same problem. I am unable to start my upgrade. I have raised SAP OSS message but I am yet to recieve a reply.
The tool is no longer available on IBM website too as they have released Fix pack 3.
Yuur help will be appreciated.
Thanks and Regards,
Karan Shah -
Se80 cannot start graphical screen painter
Hi experts:
When I open graphical painter, I counter a problem message 'password in router string.cannot start graphical screen painter' of gnetx.exe, Who can solve it,TKS.
AllenDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly
Maybe you are looking for
-
Can't download apps to my new ipod touch 5
I can't install apps from the App Store on my brand new ipod touch 5. After I enter my apple id (correctly), I get the "cannot connect to iTunes Store" message. Any ideas? All my software is up to date.
-
Why does Final Cut Pro hang on launch trying to read an event on a SAN?
I've been going back and forth on a couple machines editing some video from a shared SAN, so I think that may have screwed something up. Has anyone encountered this? Is there anyway to get FCPX to just open (without having to eject the SAN?)
-
MacBook Pro randomly restarting since upgrading to Mavericks. Help!
Ever since I downloaded Mavericks, my 2010 MacBook Pro is randomly restarting due to a GPU panic. I tried all the trouble shooting suggested by apple support via telephone (updating software, reinstalling mavericks, repairing disks). It is still rest
-
Hi, I am not much experienced authorizations. I am trying to give authorization to a user for a particular transaction. I guess I have to do that in some PFCG....I am sure this is a simple thing...but can some body refer me to any document
-
Sap bw responsbilities and daily job
Hi Guru's Can anyone guide as i am taking over the sap bw project for that i want to know the list of responsibilities and daily job. Thanks in Advance Satya