SAP. Functions Connection.logon(0, True) error without any description
I use SAP note 1028500. It provides VBA Excel macros for xRPM Financial planning data loading.
General problem contains in the following lines:
Function XRPM_SAP_LOGON(ByRef r3 As Object)
Set r3 = CreateObject("SAP.Functions")
r3.Connection.System = "A30"
r3.Connection.Client = "150"
r3.Connection.User = "kovalevavi"
r3.Connection.Password = "xRPM40SAP"
r3.Connection.Language = "RU"
If r3.Connection.logon(0, False) = True Then
strAns = "xRPM"
message = "Login Failed"
strAns = MsgBox(message, 0, strAns)
XRPM_SAP_LOGON = False
Exit Function
End If
XRPM_SAP_LOGON = True
End Function
String "If r3.Connection.logon(0, False) <> True Then" loads SAP logon. After system was chose and logon data were entered a user clicks on "OK" button and error notification without any details appears.
There are no problems with logon using direct access to SAP Logon. We have the other situation. We use Citrix with only 2 application shortcuts (Excel and SAP Logon) available. Remote desktop is not available (2 shortcuts only). I guess there are some network problems with data transfer to ERP (or SAP Logon). The macros reads file with systems in SAP Logon, but it cannot send back information on client, account, PW and language to SAP Logon (or ERP).
Could u please tell, how string «If r3.Connection.logon(0, False) <> True Then" works? How ERP access is provided via Connection.logon? Does "Connection.logon" function read SAPLOGON.INI and encapsulates its packages into SAP Logon packages or it woks in the other way? What does files it use? How does account information return to ERP?
Are there any ways for pointing to server directly and calling ERP logon via Excel macros?
Best regards,
Valerie
Edited by: Valerie Kovalyova on Feb 21, 2008 2:00 PM
К сожалению, просто этот форум не отобразил знак сравнения VBA. значения функции с True. В VBA он выглядит как знак меньше и больше без пробелов.
Макрос работает, если его просто скачать и запустить на нашем удаленном рабочем столе mywts.sap.com (при прямом подключение даже не обсуждается), ввести какие-нить левые параметры, добраться до логина и залогиниться.
Edited by: Valerie Kovalyova on Feb 21, 2008 4:42 PM
Similar Messages
-
PO Approval stuck in error without any Error message
Hi All,
we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
Error in Workflow POAPPRV/3112-127925
From SYSADMIN
To Das, SD
Sent 12-Dec-2011 16:55:01
Closed 12-Dec-2011 17:07:30
ID 164593
Responder Das, SD
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 3112-127925
User Key =429766-245
Error Name =
Error Message =
Error Stack =
Activity Id = 10770
Activity Label = ROOT:POAPPRV_TOP
Result Code = #STUCK
Notification Id =
Assigned User =
Thanks,
Sam D
Edited by: Sam D on 12 Dec, 2011 1:45 PMPlease post the details of the application release, database version and OS.
Can you find any errors in the Workflow log file?
All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
Also, search MOS for (POAPPRV stuck) and go through the docs.
Thanks,
Hussein -
I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned
Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?
-
Weird error without any error message
I've been working on some actionscript 3 system. And all of a
sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
Flash CS3, a white screen would open up (instead of the normal
flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.
It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't
execute. And without any error message! I was wondering, why is
that? By the way, the following lines do work:
var a:Number = -(2*3+4); // Gives -10.
var b:Number = (true ? 1 : 0); // Gives 1.
var c:Number = -b; // Gives -1.
var d:Number = 0-(true ? 1 : 0); // Gives -1.
var e:Number = -((true ? 1 : -1) as Number);
So, my guess is that the code (true ? 1 : 0) gives some sort
of data type which is not a Number, and therefore doesn't except
minus signs. But that wouldn't explain why it doesn't even give an
error. So what IS wrong with it?ok - well if these numbers are used to begin the execution of
a method in your file, it's likely that they are not firing up
because the syntax here is incorrect. in order to use this type of
conditional operator (which i do use quite often as well, handy
convenient ;) the structure should be:
var value:Number = (condition) ? 1 : 0;
'true' is not a 'condition' but a boolean result, so it
should not be evaluated in the way have been using it here -
however 'true' is 'true' so the result will always be 1 (the first
expression in the operator) - i'm not certain why you would need a
-0 result and if you are always wanting a 'negative' number then
use that number in the return expression, as in:
var value:Number = (condition) ? -1 : 0; -
Concurrent Program ends in Error without any error message - Apps 11.0.3
Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
RamRam,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein -
Inventory Transaction Worker erroring without any log messages.
Hi,
When I try to run Inventory Transaction Worker, it is erroring out without any log/output messages. In metalink, it has been mentioned that when there are any garbage characters in the input data, it errors out.
I checked the input data also. It seems to be fine.
Could any of you please help me in this regard???
Thanks.HI
EBS - 11.5.10.2
OS - AIX 5.3
This was working fine before and working fine in PROD.issue is in cloned instance
Initaillial I was getting following error
This concurrent manager cannot run the following registered, immediate
concurrent programs because they are not linked to this concurrent
manager's library "INVLIBR"
Cause: The immediate concurrent programs listed have been registered
th
Application Concurrent Program
INV INCDCM
BOM CMCCTM
Followed the note you provided and started getting error as mentioned in pervious post.
Now I am not able to add WICTWS to lib 'INVLIBR' as its of PL/sql type executable
Thanks -
SAP Installation RFC LOGON FAILED- SQl ERROR ON PROGRAM SPAM (SAPMSSY1)
Dear Gurus,
during the SAP installation, i got the RFC logon failed error: SQL Error on program SPAM (SAPMSSY1)
I am pasting the disp_w0 file.....................
http://www.4shared.com/file/89058633/ac7a0547/_2__dev_w0.html
pls let me know the how to lovve this.
the basic error is like....
Generating ABAP/4 Program SAPMS380 .
A Source SAPMS380 Line 8.
A Error Code GEN_SOURCE_FORMAT.
A Module $Id: //bas/620/src/krn/gen/screads.c#7 $ SAP.
A Function sc_getstring Line 624.
A Error when reading program SAPMS380
Its showing this kinda error for a max of program like SAPMSSY1, SAPMSSY2, SAPMS380 and lots more which are clearly depicted in disp_w0 file.
what is the error??? is there any error in program SAPMSSY1??
if this is true pls let me know hot to solve this? where i can access this SAPMSSY1 ?? remember i can not use any T-code like SE36 as my installation is not finished.
Kindly have a detail look on the disp_w0 file.
AbhishekHI
can u tell me how 2 acces the ABAP program like SAPMSSY1 etc. without entering into SAP by T-code.
as i can not login right now. i want to do certain changes in these programs.
Abhishek -
Hi,
I am getting this error since recently when I am using my MBP:
"Because a USB device was drawing too much power from your computer..."
The 'funny' thing: there is no USB device attached to the computer (only power and monitor cables).
Why is this happening and what could I do about it?
Appreciate your ideas?It's probably an internal hardware fault, but you can try this:
Intel-based Macs: Resetting the System Management Controller (SMC) -
Update Error Without any Reason.
I have a Code which is i think is fine, Irun it give Syntax
error in Update Statement:
The code I am Trying to do is:
<CFIF NOT isDefined ("URL.clientUserLookupID")>
<CFLOCATION url="list.cfm" addtoken=no>
</CFIF>
<CFQUERY name=clientUserInfo
datasource="#Application.data#">
SELECT tblclientUserLookup.clientUserLookupID,
tblclientUserLookup.ClientID, tblUsers.username, tblUsers.password,
tblUsers.UserEmail, tblUsers.UserID
FROM tblclientUserLookup, tblUsers
WHERE tblclientUserLookup.clientUserLookupID =
#URL.clientUserLookupID#
AND tblUsers.UserID = tblclientUserLookup.UserID
</CFQUERY>
<CFQUERY name=AttachedSearchesInfo
datasource="#Application.data#">
SELECT tblSearches.SearchID
FROM tblclientUserSearchLookup, tblSearches
WHERE tblclientUserSearchLookup.clientUserLookupID =
#URL.clientUserLookupID#
AND tblclientUserSearchLookup.SearchID =
tblSearches.SearchID
</CFQUERY>
<CFSET AttachedSearchList = "">
<CFLOOP query=AttachedSearchesInfo>
<CFSET AttachedSearchList =
ListAppend("#AttachedSearchList#", "#SearchID#")>
</CFLOOP>
<CFQUERY name=ClientInfo
datasource="#Application.data#">
SELECT Name
FROM tblClients
WHERE ClientID = #clientUserInfo.ClientID#
</CFQUERY>
<CFQUERY name=SearchInfo
datasource="#Application.data#">
SELECT *
FROM tblSearches
WHERE ClientID = #clientUserInfo.ClientID#
</CFQUERY>
<CFINCLUDE template="../../header.cfm">
<CFOUTPUT>
<p><b>client EXTRANET ACCOUNT : Modify
'#ClientInfo.Name#' ACCOUNT</b></p>
</CFOUTPUT>
<CFFORM action="data/update.cfm" method=post>
<CFOUTPUT query=clientUserInfo>
<table>
<tr>
<td align=right class=AdminField>
Username
</td>
<td>
<CFINPUT type=text name="username" value="#username#"
required=yes message="You must enter a Username.">
</td>
</tr>
<tr>
<td align=right class=AdminField>
Password
</td>
<td>
<CFINPUT type=text name="password" value="#password#"
required=yes message="You must enter a Password.">
</td>
</tr>
<tr>
<td align=right class=AdminField>
Account Email Address
</td>
<td>
<CFINPUT type=text value="#useremail#" name="email">
</td>
</tr>
<tr>
<td align=right class=AdminField valign=top>
Linked Searches
</td>
<td>
<CFSET SizeVar = 10>
<CFSELECT name=SearchesToAttach multiple=yes
size="#sizeVar#">
<CFLOOP query=SearchInfo>
<CFIF ListFind("#AttachedSearchList#", "#SearchID#")>
<OPTION value=#SearchID#
selected>#Title#</OPTION>
<CFELSE>
<OPTION value=#SearchID#>#Title#</OPTION>
</CFIF>
</CFLOOP>
</CFSELECT><br>
hold down ctrl for multiple
</td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td>
<INPUT type="hidden" name="clientUserLookupID"
value="#clientUserLookupID#">
<INPUT type="hidden" name="UserID" value="#UserID#">
<INPUT type="submit" value="Update Account">
</td>
</tr>
</table>
</CFOUTPUT>
</CFFORM>
<CFINCLUDE template="../../footer.cfm">
The above is the file where we have a form and when i click
the update submit button:
The code of that page is below:
<CFIF NOT IsDefined("Form.UserID") OR NOT
IsDefined("Form.ClientUserLookupID")>
<CFLOCATION url="../list.cfm" addtoken=no>
</CFIF>
<CFQUERY name="exists" datasource="#Application.data#">
SELECT *
FROM tblUsers
WHERE username = '#Form.username#'
AND UserID <> #Form.UserID#
</CFQUERY>
<CFIF exists.recordcount GT 0>
<CFINCLUDE template="../cannotadd.cfm">
<CFABORT>
</CFIF>
<!---<cfdump var="#form#"><cfabort>--->
<CFTRANSACTION>
<cfquery datasource="RainesDataBase">
UPDATE tblUsers
SET Username=<cfif IsDefined("FORM.username") AND
#FORM.username# NEQ "">
<cfqueryparam value="#FORM.username#"
cfsqltype="cf_sql_clob" maxlength="50">
<cfelse>
</cfif>
, Password=<cfif IsDefined("FORM.password") AND
#FORM.password# NEQ "">
<cfqueryparam value="#FORM.password#"
cfsqltype="cf_sql_clob" maxlength="50">
<cfelse>
</cfif>
, UserEmail=<cfif IsDefined("FORM.email") AND #FORM.email#
NEQ "">
<cfqueryparam value="#FORM.email#" cfsqltype="cf_sql_clob"
maxlength="50">
<cfelse>
</cfif>
WHERE UserID=<cfqueryparam value="#FORM.UserID#"
cfsqltype="cf_sql_numeric">
</cfquery>
<!---
<CFQUERY name=updateUser
datasource="#Application.data#">
UPDATE tblUsers
SET Username = '#Form.Username#',
Password = '#Form.Password#',
UserEmail = '#Form.email#'
WHERE UserID = #Form.UserID#
</CFQUERY>
--->
<CFQUERY name="deleteClientUserSearchLookups"
datasource="#Application.data#">
DELETE
FROM tblClientUserSearchLookup
WHERE ClientUserLookupID = #Form.ClientUserLookupID#
</CFQUERY>
<CFIF isDefined("Form.searchesToAttach")>
<CFLOOP list="#Form.searchesToAttach#" index=index>
<CFQUERY name=insertClientUserSearchLookup
datasource="#Application.data#">
INSERT INTO tblClientUserSearchLookup (ClientUserLookupID,
SearchID)
VALUES (#Form.ClientUserLookupID#, #index#)
</CFQUERY>
</CFLOOP>
</CFIF>
</CFTRANSACTION>
<CFLOCATION url="../list.cfm" addtoken=no>
But this is not working as it is showing this below error as:
he web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
Syntax error in UPDATE statement.
The error occurred in
C:\Inetpub\wwwroot\ConsultantTrack_OldFTP\Admin\users\clients\data\update.cfm:
line 19
17 : <!---<cfdump
var="#form#"><cfabort>--->
18 : <CFTRANSACTION>
19 : <cfupdate datasource="#Application.data#"
tablename="tblUsers"
formfields="username,password,UserEmail,userid">
20 : <!---<cfquery datasource="RainesDataBase">
21 : UPDATE tblUsers
SQLSTATE
SQL update tblUsers set username= (param 1) ,password= (param
2) ,UserEmail= (param 3) where UserID= (param 4)
VENDORERRORCODE 3092
DATASOURCE RainesDataBase
Resources:Could be the datatypes in your cfqueryparam tags. As a
minimum, use integer for the userid one.
Or it could be a reserved problem with "password" -
I have reset netwrok settings, ip addresses are all fine, restarted my router, but I may be missing something. Anyone else having similar problems?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Generate DP BOM check box without any description - /SAPAPO/CURTO_GEN_DP
I am using APO 5.1. In transaction /SAPAPO/CURTO_GEN_DP, there is a checkbox that is blank right below the "Expl. Quantity" field. I am trying to determine the purpose of that check box. Just recently since support stack 12, I am finding that if it is not checked some of the input components will be missing. When checked all the input components are created correctly from the SNP PDS.
Thanks for any insight,
Brian HoustonHi Brian,
Stanimir is right. The label should have the text "Do not consider Transportation lanes to other locations". You can check note 1448356 which describes the problem and provides you with a manual solution.
Hope it helps!
Cheers!
Stefan -
Hi Experts
I am using the following code for SAP-VB Connect, but returns the syntax error in the below line, whats the error actually, and how to correct this, pls help me on this.
If sapConnection.logon(0, False) True Then
The code collected from the one of the forum.
Regards
Rajaram
Private Sub Command1_Click()
Dim functionCtrl As Object 'Function Control (Collective object)
Dim sapConnection As Object 'Connection object
Dim theFunc As Object 'Function object
'Create a function object
Set functionCtrl = CreateObject("SAP.Functions")
'Connect to R/3
Set sapConnection = functionCtrl.Connection
sapConnection.Client = "391"
sapConnection.user = "sap01" 'You user id
sapConnection.Language = "EN"
sapConnection.password = "victory' You password"
If sapConnection.logon(0, False) True Then
MsgBox "No connection to R/3!"
Exit Sub 'End program
End If
Sheet1.Cells.Clear
Sheet1.Cells.Font.Name = "Times New Roman"
Sheet1.Cells.Font.Size = 11
'*********************** BAPI_WAGETYPE_EMPLOYEEGETLIST *********************
Dim returnFunc As Boolean
Dim returnParam As Object
Dim pernr As Long
Dim row, col As Integer
Dim retTab As Object
pernr = InputBox("Enter Employee Personnel Number")
Set theFunc = functionCtrl.Add("BAPI_WAGETYPE_EMPLOYEEGETLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
theFunc.exports("LANGUAGE") = "EN"
returnFunc = theFunc.call
'Cells(2, 1) = "Function Return Value"
'Cells(2, 2) = returnFunc
Set returnParam = theFunc.imports("RETURN")
Cells(1, 1) = "Personnel Number"
Cells(1, 2) = pernr
Cells(1, 2).Font.Bold = True
'Cells(3, 1) = "Message Ret Type"
'Cells(3, 2) = returnParam("TYPE")
Range(Cells(1, 1), Cells(3, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 2), Cells(3, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 2).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 3).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 4).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 5).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 1), Cells(3, 1)).Font.Bold = True
Set retTab = theFunc.tables("WAGETYPES")
rw = 5
cl = 2
Cells(4, 1) = "WAGE LIST"
Cells(4, 1).Font.Bold = True
Cells(4, 2) = "Wage Type"
Cells(4, 3) = "Wage Text"
Cells(4, 4) = "Start Date"
Cells(4, 5) = "End Date"
For Each retTab In retTab.Rows
cl = 2
Cells(rw, cl) = retTab("WAGETYPE")
Cells(rw, cl + 1) = retTab("WAGELTEXT")
Cells(rw, cl + 2) = retTab("VALBEGIN")
Cells(rw, cl + 3) = retTab("VALBEGIN")
rw = rw + 1
Next
Range(Cells(5, 2), Cells(rw - 1, cl + 3)).BorderAround , xlThick, xlColorIndexAutomatic
'******************** BAPI_PERSDATA_GETDETAILEDLIST *********************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_PERSDATA_GETDETAILEDLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Dim dettab As Object
Set dettab = theFunc.tables("PERSONALDATA")
Cells(10, 1) = "EMPLOYEE DETAILS"
Cells(10, 2) = "First Name"
Cells(11, 2) = "Last Name"
Cells(12, 2) = "Gender"
Cells(13, 2) = "Date of Birth"
Cells(14, 2) = "Country of Birth"
Cells(15, 2) = "Marital Status"
Cells(16, 2) = "Nationality"
Cells(17, 2) = "SSN No."
Cells(10, 1).Font.Bold = True
Cells(10, 1).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 2), Cells(17, 2)).Font.Bold = True
Range(Cells(10, 2), Cells(17, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 3), Cells(17, 3)).BorderAround , xlThick, xlColorIndexAutomatic
For Each dettab In dettab.Rows
Cells(10, 3) = dettab("FIRSTNAME")
Cells(11, 3) = dettab("LASTNAME")
If dettab("GENDER") = 1 Then
Cells(12, 3) = "Male"
ElseIf dettab("GENDER") = 2 Then
Cells(12, 3) = "Female"
Else
Cells(12, 3) = "Others"
End If
Cells(13, 3) = dettab("DATEOFBIRTH")
Cells(14, 3) = dettab("COUNTRYOFBIRTH")
Cells(15, 3) = dettab("MARITALSTATUS")
Cells(16, 3) = dettab("NATIONALITY")
Cells(17, 3) = dettab("IDNUMBER")
Next
'****************** BAPI_GET_PAYROLL_RESULT_LIST ***************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_GET_PAYROLL_RESULT_LIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Cells(19, 1) = "Directory of payroll results"
Cells(19, 1).Font.Bold = True
Cells(19, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(20, 1) = "SEQNR "
Cells(20, 2) = "FPPERIOD"
Cells(20, 3) = "FPBEGIN"
Cells(20, 4) = "FPEND"
Cells(20, 5) = "BONUSDATE"
Cells(20, 6) = "PAYDATE"
Cells(20, 7) = "PAYTYPE_TEXT"
Range(Cells(20, 1), Cells(20, 7)).Font.Bold = True
Range(Cells(20, 1), Cells(20, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Set retTab = theFunc.tables("RESULTS")
rw = 21
For Each retTab In retTab.Rows
cl = 1
Cells(rw, cl) = retTab("SEQUENCENUMBER")
Cells(rw, cl + 1) = retTab("FPPERIOD")
Cells(rw, cl + 2) = retTab("FPBEGIN")
Cells(rw, cl + 3) = retTab("FPEND")
Cells(rw, cl + 4) = retTab("BONUSDATE")
Cells(rw, cl + 5) = retTab("PAYDATE")
Cells(rw, cl + 6) = retTab("PAYTYPE_TEXT")
rw = rw + 1
Next
Range(Cells(20, 1), Cells(rw - 1, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 3)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 4)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 5)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 6)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).HorizontalAlignment = 3
'***************** LOGOFF ****************************************
functionCtrl.Connection.logoff
Set sapConnection = Nothing
Set functionCtrl = Nothing
End SubIt will be helpfull, if you can send any screen shot of error page.
Thanks ,
Chetan -
Crystal Reports 2011 cannot connect to Salesforce - Unexpected Error
I am unable to connect to salesforce from Cystal Reports 2011. I get a dialogue saying
Failed to Open the connection
Details:Unexpected Error
-I have increased the JVMMaxHeap in CRCONFIG.XML to 512000000
-I have appended the security token to the password
-I am not going through a proxy server
I am able to login successfully to the salesforce account using Crystal Reports 2008.
In order to narrow the issue down and exclude any issues related to custom objects on our corporate acount I created a clean , out of the box dev account on salesforce. Again I can connect to it with 2008 but not 2011 on whcih I get the same error
I can verify that a login succesfully occured in salesforce, the login in history shows the connections are being made.
In order to reproduce simply create a salesforce dev account, install CR 2011 SP02 and attempt to create a database connection to the salesforce account
Crystal Reports Log is as follows
011-9-30-15-14-27 10176 .\xml.cpp 112 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\jdbc.cpp 172 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\crdb_sforce.cpp 127 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\javabeans.cpp 113 In DllMain() 20
2011-9-30-15-14-27 10176 .\javabeans.cpp 136 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\xml.cpp 112 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\jdbc.cpp 172 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\crdb_sforce.cpp 127 Leaving DllMain() 20
2011-9-30-15-14-27 10176 .\javabeans.cpp 113 In DllMain() 20
2011-9-30-15-14-27 10176 .\javabeans.cpp 136 Leaving DllMain() 20
2011-9-30-15-14-32 10176 .\crdb_sforce.cpp 464 The ErrorArray exception thrown from the function DbLogonServer() 1
2011-9-30-15-14-32 10176 .\crdb_sforce.cpp 661 In DbFreeLogonInfo() 20
2011-9-30-15-14-32 10176 .\crdb_sforce.cpp 667 Leaving DbFreeLogonInfo() 20
2011-9-30-15-14-32 10176 .\crdb_sforce.cpp 2567 In DbFreeErrorInfo() 20
2011-9-30-15-14-32 10176 .\crdb_sforce.cpp 2570 Leaving DbFreeErrorInfo() 20
2011-9-30-15-14-32 10176 ..\cserrinf.cpp 523 Error 31837 (..\..\src\data\queryenghelp.cpp, 554): Failed to open the connection.: Unexpected error 1
2011-9-30-15-14-51 10176 .\javabeans.cpp 113 In DllMain() 20
2011-9-30-15-14-51 10176 .\javabeans.cpp 136 Leaving DllMain() 20
2011-9-30-15-14-51 10176 .\crdb_sforce.cpp 127 Leaving DllMain() 20
Any other ideas on what I can try here?Hi Vitaly
I did some further playing based on the information you provided; that it should not differ between 2008 and 2011. I currently have both Crystal 2008 SP3 and 2011 SP2 installed so I went through and looked at the CRConfig files for both applications and could not see any major differences other then where they configure as the JVM and classpath.
I have managed to get Crystal 2011 to connect to salesforce after making one small edit to the 2011 CRConfig, changing the classpath to use the 2008 version of CRDBSForceServer.jar
I removed the entry within classpath for the CR2011 CRDBSForceServer.jar
F:\Program Files (x86)\SAP BusinessObjects 4
SAP BusinessObjects Enterprise XI 4.0\java/lib/CRDBSForceServer.jar;
and replaced it to point at the 2008 version
F:\Program Files (x86)\Business Objects\Common\4.0\java/lib/CRDBSForceServer.jar;
When I do this I am able to establish a connection to the salesforce DB without any other changes in the CRConfig. This does not solve my problem as I am still unable to run a deployed version of the report as I assume the latest 2011 version of the JAR is also part of the BO4 server and is getting the same connection problem on the server side but this may narrow it down enough for you to be able to provide further clarification on what the issue is.
thanks,
Brendan -
My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues. How can I fix it? Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?
Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
Using JTA enabled connection in a JSP/servlet without transaction
Can we use a JTA enabled connection in a JSP/servlet without any transaction?
ThanksThis might be helpful.
http://java.sun.com/blueprints/guidelines/designing_enterprise_applications_2e/transactions/transactions6.html
Maybe you are looking for
-
Satellite L500-19X - Can't use the recovery disk
Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen, I had tried safe mode (all three) and repair and all I got was a black scr
-
Using Active MQ with ES2 Turnkey
I'm trying to send a JMS message from an ES2 workflow, and have hit a problem I just can't solve. I've embedded an ActiveMQ broker in JBoss, and exposed it through the JNDI context (I followed the instructions here: http://activemq.apache.org/integr
-
DB Link Hanging in Oracle 10.2.0.3
Hi, DB link hanging when we are trying to connect remote system in 10.2.0.3 Linux 64 bit. Linux 64 bit ----> Remote Linux 64 bit is not working Linux 64 bit ----> Remote Windows 64 bit is not working Remote Linux 64 bit ----> Linux 64 bit is not work
-
Data Views: Switching from IQ to Crystal: How to?
Hi everyone, My company is looking to make the switch from IQ Report Writer 5 to Crystal Reports XI or 2008. We have a couple questions though on how to make this switch easier. I may need to talk to Business Objects support instead, but I thought I'
-
Hi, Can any one tell me how to proceed with a HTTP request which is sent to ECC system in form of Idoc and I want the response back from The Idoc Format. i.e.Request- HTTP-SAP XI------IDOC i.e.Response---IDOC -SAP XI----HTTP Any Help Is Highly apprec