SAP HR: Modifying Appraisal Ratings in infotype 25

SAP HR: Modifying Appraisal Ratings in infotype 25

normally the dynpro inherits field attributes from DDIC, so if you changed the data domain it should be OK
now if you have a problem with values, the easiest way will be to divide them by 1000 each time you handle a calculation on those values...

Similar Messages

  • Linking Appraisal ratings to Compensation Management

    Hi All,
    Needed guidance on linking appraisal ratings to CM in SAP.
    I have been trying to link it by using the matrix guideline but I guess I am missing something in the config.
    I basically want to link a rating to a value.
    Does anyone have configuration  notes or any idea on how to go about doing the same.
    Thanks & Regards
    Dileep

    Hai Raj,
    Thnks for the reply.I have configured the matrix dimension and also the guidelines.. But still the problem persists.
    Before that let me explain my scenario along with my approach.
    We have to perform the compensation for 2 level of employees. One for the Top-level & the other for the Low-level. How we have classified Top-level & low level is that from the employee sub-group till the manager level it is Top-level management & executive employee sub-group as low level mgt. 
    For this scenario i have maintained 2 adjustment types for both top-level & low-level mgt.
    Kindly let me know how to approach to this scenario.
    I could get the values for few employees as i run the HRCMP0001C from the matrix table based upon the appraisal ranking.
    But not for both the level of employees.
    warnings i face : Employee performance Rule not found ( i have configured 2 different rules for 2 level of employees)
                                   Guide lines in compensation area as on 0101.2008 does not exist.
                                   Eligibility rule for eligibility group on 01.01.2008 does not exist .
    Kindly let me know the loic behind maintaining the dates along with the errors
    Dileep

  • Integrating Dynamic Adobe Form with BSP: SAP Objectives setting &Appraisal

    Hi all,
    My users ask me whether wecan use Adobe Form to replace SAP standard BSP appraisal form (generated by HAP_DOCUMENT).
    I konw that it's possible to integrate Adobe Interactive form with BSP.
    But my Adobe form must contain dynamic table, with ability to insert/delete row on the form. This is just like what's there when you can adding objectives by client scripting in SAP OSA.
    Please tell me if the integration of dynamic Adobe form with BSP is possible?
    (We are on ECC 6, EPH2).
    Thank you so much.
    Giang

    Hello,
    have you worked with the following document?
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e58022-2a39-2a10-69a8-c1a892e2b3f4&overridelayout=true
    Did you try to develop a demo version of the form to try if it is possible to do what you need to?
    Do you plan to replace "only" the standard non-Adobe form or to develop a whole custom application?
    PRovide more details about the steps you´ve tried and we can solve this out. Regards, Otto

  • Not able to modify the data for infotype 0008 using FM

    Hi All ,
    I have got a requirement for updating the infotype 0008 data  using FM : HR_MAINTAIN_MASTER_DATA.
    While trying to modify the wagetypes data which is of blank ..unable to upload the amount for that partcular field ..
    For this am herewith the link  of o/p :
    http://i55.tinypic.com/28jfw2c.jpg for this am also posting the code...
    Please suggest me furthur in what way i can upload..
          SELECT * FROM pa0008 INTO TABLE itab_pa0008
    FOR ALL ENTRIES IN itab
        WHERE pernr = wa_data-pernr
        AND begda = wa_data-begda_out
        AND endda = wa_data-endda_out.
        DESCRIBE TABLE itab_pa0008 LINES lin.
        IF lin EQ  0.
          c_action = 'INS'.
        ELSE.
          c_action = 'MOD'.
        ENDIF.
        LOOP AT itab INTO wa_itab WHERE pernr = wa_data-pernr.
          CLEAR: wa_bapireturn, wa_bapireturn1, wa_hr_return.
          REFRESH: it_pprop[],it_modified_keys[].
          it_pprop-infty = '0008'.
          it_pprop-fname  = 'P0008-TRFAR'.                 "1
          it_pprop-fval = wa_itab-trfar.
          APPEND it_pprop.
          CLEAR it_pprop.
          it_pprop-infty = '0008'.
          it_pprop-fname  = 'P0008-TRFGB'.                 "2
          it_pprop-fval = wa_itab-trfgb.
          APPEND it_pprop.
          CLEAR it_pprop.
          it_pprop-infty = '0008'.
          it_pprop-fname  = 'P0008-TRFGR'.                  "3
          it_pprop-fval = wa_itab-trfgr.
          APPEND it_pprop.
          CLEAR it_pprop.
          it_pprop-infty = '0008'.
          it_pprop-fname  = 'P0008-TRFST'.                  "4
          it_pprop-fval = wa_itab-trfst.
          APPEND it_pprop.
          CLEAR it_pprop.
          flag = flag + 1.
    *****************************************************************************************************5
          BREAK-POINT.
          IF NOT wa_itab-lga1 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA01'.
            it_pprop-fval = wa_itab-lga1.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet1.
          ENDIF.
          IF NOT wa_itab-bet1 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET01'.
            it_pprop-fval = wa_itab-bet1.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************6
         IF NOT wa_itab-lga2 IS INITIAL.
           it_pprop-infty = '0008'.
           it_pprop-fname  = 'P0008-LGA02'.
           it_pprop-fval = wa_itab-lga2.
           APPEND it_pprop.
           CLEAR it_pprop.
           bet1 = wa_itab-bet2.
         ENDIF.
          IF NOT wa_itab-bet2 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET02'.
            it_pprop-fval = wa_itab-bet2.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************7
          IF NOT wa_itab-lga3 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA03'.
            it_pprop-fval = wa_itab-lga3.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet3 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET03'.
            it_pprop-fval = wa_itab-bet3.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************8
          IF NOT wa_itab-lga4 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA04'.
            it_pprop-fval = wa_itab-lga4.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet4 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET04'.
            it_pprop-fval = wa_itab-bet4.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************9
          IF NOT wa_itab-lga5 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA05'.
            it_pprop-fval = wa_itab-lga5.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet5 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET05'.
            it_pprop-fval = wa_itab-bet5.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************10
          IF NOT wa_itab-lga6 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA06'.
            it_pprop-fval = wa_itab-lga6.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet6 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET06'.
            it_pprop-fval = wa_itab-bet6.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************11
          IF NOT wa_itab-lga7 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA07'.
            it_pprop-fval = wa_itab-lga7.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet7 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET07'.
            it_pprop-fval = wa_itab-bet7.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************12
          IF NOT wa_itab-lga8 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA08'.
            it_pprop-fval = wa_itab-lga8.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet8 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET08'.
            it_pprop-fval = wa_itab-bet8.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************13
          IF NOT wa_itab-lga9 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA09'.
            it_pprop-fval = wa_itab-lga9.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet9 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET09'.
            it_pprop-fval = wa_itab-bet9.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************14
          IF NOT wa_itab-lga10 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-LGA010'.
            it_pprop-fval = wa_itab-lga10.
            APPEND it_pprop.
            CLEAR it_pprop.
            bet1 = wa_itab-bet2.
          ENDIF.
          IF NOT wa_itab-bet10 IS INITIAL.
            it_pprop-infty = '0008'.
            it_pprop-fname  = 'P0008-BET010'.
            it_pprop-fval = wa_itab-bet10.
            APPEND it_pprop.
            CLEAR it_pprop.
          ENDIF.
    *******************************************************************************************************15
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-LGA11'.
       it_pprop-fval = wa_itab-lga11.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-BET11'.
       it_pprop-fval = wa_itab-bet11.
       APPEND it_pprop.
       CLEAR it_pprop.
    ********************************************************************************************************16
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-LGA12'.
       it_pprop-fval = wa_itab-lga12.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-BET12'.
       it_pprop-fval = wa_itab-bet12.
       APPEND it_pprop.
       CLEAR it_pprop.
    ********************************************************************************************************17
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-LGA13'.
       it_pprop-fval = wa_itab-lga13.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-BET13'.
       it_pprop-fval = wa_itab-bet13.
       APPEND it_pprop.
       CLEAR it_pprop.
    ********************************************************************************************************18
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-LGA14'.
       it_pprop-fval = wa_itab-lga14.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
       it_pprop-infty = '0008'.
       it_pprop-fname  = 'P0008-BET14'.
       it_pprop-fval = wa_itab-bet14.
       APPEND it_pprop.
       CLEAR it_pprop.
    BREAK-POINT.
          CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
            EXPORTING
              number = wa_itab-pernr
            IMPORTING
              return = wa_bapireturn1.
          BREAK-POINT.
         IF c_action = 'INS'.
           CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
             EXPORTING
               pernr           = wa_itab-pernr
               actio           = 'INS'
             tclas           = 'A'
               begda           = wa_data-begda_out             "'20110401'
               endda           = wa_data-endda_out             "'99991231'
               dialog_mode     = '2'
             luw_mode        = '1'
             IMPORTING
               return          = wa_bapireturn
               return1         = wa_bapireturn1
               hr_return       = wa_hr_return
             TABLES
               proposed_values = it_pprop
               modified_keys   = it_modified_keys.
           IF NOT wa_bapireturn IS INITIAL.
             WRITE : / wa_bapireturn.
             CLEAR : wa_itab , wa_bapireturn.
           ENDIF.
         ELSEIF c_action = 'MOD'.
            CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
              EXPORTING
             infty         = '0008'
                pernr           = wa_itab-pernr
                actio           = 'MOD'
                begda           = wa_data-begda_out             "'20110401'
                endda           = wa_data-endda_out             "'99991231'
          record        =  p_record
             recordnumber  = wa_itab-SEQNR
             operation     = change
             nocommit      = nocommit
                dialog_mode     = '0'
             IMPORTING
                return          = wa_bapireturn
                return1         = wa_bapireturn1
                hr_return       = wa_hr_return
              TABLES
                proposed_values = it_pprop
                modified_keys   = it_modified_keys.
            IF NOT wa_bapireturn IS INITIAL.
              WRITE : / wa_bapireturn.
              CLEAR : wa_itab , wa_bapireturn.
            ENDIF.
         ENDIF.
          CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
            EXPORTING
              number = wa_itab-pernr
            IMPORTING
              return = wa_bapireturn1.
        ENDLOOP.
      ENDLOOP.

    Here is a sampe, and the logic you are using for wages goes in the internal table for wages (you already have the enqueue & dequeue so you don't have to worry about that, so you only have to add the BAPI_TRANSACTION_COMMIT):
    CALL FUNCTION 'BAPI_BASICPAY_CHANGE'
      EXPORTING
        employeenumber             = pa0008-pernr
        subtype                    = pa0008-subty
        objectid                   = pa0008-objps
        lockindicator              = pa0008-sprps
        validitybegin              = pa0008-begda
        validityend                = pa0008-endda
        recordnumber               = pa0008-seqnr
        payscaletype               = pa0008-trfar
        payscalearea               = pa0008-trfgb
        payscalegroup              = pa0008-trfgr
        payscalelevel              = pa0008-trfst
    *   NEXTINCREASE               =
    *   LOCALALLOWLEVEL            =
    *   PARTNERSHIP                =
    *   CURRENCY                   =
    *   COMPARISONPAYSCLTYPE       =
    *   COMPARISONPAYSCLAREA       =
    *   COMPARISONPAYSCLGRP        =
    *   COMPARISONPAYSCLLVL        =
    *   COMPNEXTINCREASE           =
    *   CAPACITYUTILLEVEL          =
    *   HOURSWORKEDPERPERIOD       =
    *   ANNUALSALARY               =
    *   CASEGROUPCATALOG           =
    *   CASEGROUP                  =
    *   CURRENCYANNUALSALARY       =
    *   REASON                     =
    *   NOCOMMIT                   =
    * importing
    *   return                     =
    TABLES
       wagetypes                  = wages.
    Regards,
    Ryan Crosby

  • Issue while modifying entries in custom infotype after enhancement.

    Hi All ,
    I have enhanced custom Infotype (Added 2 new fields).
    After enhancement, I am facing one issue while updating infotype through FM HR_INFOTYPE_OPERATION.
    Issue is that I am not able to update/modify records through FM HR_INFOTYPE_OPERATION.
    RETURN parameter of FM comes empty indicating no errors but actual records in database table are not updated. I debugged FM and found that SAVE button on PA30 screen is disabled.
    Anyone knows reason for above proble and also please help me in solving issue.
    Regards,
    Jigar Thakkar.

    Thanks for your response.
    Yes i am able to update IT9201 through PA30 but not with FM HR_INFOTYPE_OPERATION. Also I have activated PXXXX structure through PM01.
    While debugging FM HR_INFOTYPE_OPERATION i saw that SAVE button is disabled and processing stops there.
    Regards,
    Jigar.

  • Function modules for updating,modifying etc for  OM infotypes (1000,1001)

    Hi experts,
                     can anybody help me by giving some FM s which will be used to Insert,Update etc for OM infotypes. i need to update HRP1000,HRP1001 AND HRT1222 tables. i tried with 'HR_INFOTYPE_OPERATION' & 'HR_MAINTAIN_MASTERDATA'. but these two FMs require PERNR as parameter. but i do not have here.
    regards,
    Murthy

    Hi Murthy,
    Here's a sample code to update IT1000. 
    DATA wa_1000 TYPE p1000.
    populate wa_1000 with updated data.
              CALL FUNCTION 'RH_PNNNN_MAINTAIN'
                EXPORTING
                  act_fcode           = 'AEND'  " AEND to modify, INSE to insert
                  act_otype           = wa_1000-otype
                  act_objid           = wa_1000-objid
                  act_infty           = '1000'
                  act_pnnnn           = wa_1000
                  suppress_dialog     = '2' " you can use 0 if you want Dialog mode
                EXCEPTIONS
                  infty_not_valid     = 1
                  no_plvar            = 2
                  object_not_defined  = 3
                  otype_not_valid     = 4
                  no_authority        = 5
                  action_rejected     = 6
                  no_gdate            = 7
                  fcode_not_supported = 8
                  OTHERS              = 9.
              IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF.
    Hope that helps,
    Hanna

  • Can appraiser ratings be defaulted as reviewer's ratings?

    Hi,
    My client has two levels of appraisers. The appraiser rates the employee first. Later the reviewer rates him. I have made two columns for both of them. Both of them are able to rate the employee.
    The client's requirement is like since the reviewers do not have time to spend rating to the employees, they want the appraiser's ratings defaulted as reviewer's ratings. The reviewer only edits ratings against those criteria which he feels that the appraiser's ratings are inappropriate. Is this available as a standard function in Appraisals?
    Regards,
    Sasi.

    Hi Sasi,
    You can implement BADI HRHAP00_VAL_DET for this purpose, please give it a try.
    There is a sample implementation named HRHAP00_VAL_DET_012.
    You can assign your implementation to column via "Value determination" field.
    Regards,
    Dilek

  • SAP CEI: Modify title and customize theme

    Hi all,
    I have two questions:
    1.) Where can I maintain strings? I have to change the default title "SAP Customer Engagement Intelligence powered by SAP HANA".
    2.) I want to modify the default theme (sap_bluecrystal). I have added my modification via  theme designer and can see it within /UI5/THEME_TOOL
    In transaction /n/UI2/NWBC_CFG_CUST I  added the following entry:
    • Path Filter: SAP_FLP
    • Parameter Name: THEME
    • Value: <theme_id>
    But still the old theme is loaded?
    I have tested the theme via sap-theme=<theme ID>@<theme root> - in general theme ist available and could be used..
    Thanks and Regards,
    Patrick

    I found a solution to change the displayed title:
    In the mentioned i18n-File contains at first row a SAPUI5 translation-key.
    Copy this key, open transaction se63. Click in the main menu on entry "Translation" -> ABAP Objects -> Short texts. Select SAPUI5 Text Elements from the tree.
    Next we can select the language an modify the translations.
    More detailed described at Translations in SAPUI5 Application
    This means, question 1 is solved. Question 2 is still open. Any ideas?
    Regards,
    Patrick

  • SAP HCM P&F - Update an infotype field which is NOT passed from Form

    Dear Experts,
    I have a requirement to update the Infotype with the entries in the HCM form (input by Employee in ESS) upon Manager's approval in MSS.
    We are achieving this functionality using HCM P&F (FPM) with an Workflow associated.  In this Workflow Standard Task (TS17900108) is used to Save the form data into the Database.
    But there is one field (APPROVED_DATE) in the Infotype whose value is not from the FORM but should be updated in the Infotype.
    Please help me with your inputs.
    Regards,
    Shankar

    Dear Christopher,
    I am extremely thankful to you for all the replies.  But, unfortunately, we are messed up with this requirement and we couldn't achieve it.
    In this regard, could you please give us the step-by-step procedure to achieve this functionality?
    Requirement in brief again:
    We have designed Overtime HCM form (FPM) using which employee requests for the Overtime.  This form is sent for the Manager for approval.  We have achieved this functionality.  With the Manager Approval, the database is also updated perfectly.
    Then we have added one more field in the infotype to track the Approved Date.  This field is to be updated along with the other fields (sent from FORM) upon the approval of the manager.
    And now though the other fields are updated correctly into the infotype, the approved date is not updated.
    Thanks a ton in advance for your guidance as this is very critical and urgent requirement for us.
    Regards,
    Shankar.

  • Client status 300 not modifiable for us jobattributes infotype

    Hi Gurus,
    We are in ECC6.0 and recently applied HRSP22.After this,my client was not able to create jobcode in PO03.When i select us jobattributes infotype and click create Client status 300 notmodifiable message was there.I checked T000 and no changes were allowed was set in Production.I have deactivated TRSPADMIN, TRSP CORR (set to X).But, still i see same message when try to create jobcode.Any quick inputs on this is appreciated and points will be given.
    Regards,
    Johnson

    Hi,
    Are you getting this error only for job attributes or also for some other senarioas.
    thanks,
    vasu.

  • SAP CLM: Modifying Item detail to include a custom field

    Hello,
    Is it possible to modify the line item page to include another custom field ?
    I navigated through Extension Definition configuration but there is no Class for Line Item. Is this even possible?
    Thanks,
    Arijeet

    Hi Prasad,
    Thank you for your help. But I am unable to find out the correct class to include the extensions. As per the Reference Guide the class ID is 1604 but I am unbale to see this while trying to add the fields in Extension Definition Configuration.
    It would be great if you could provide some more concrete steps.
    Thanks,
    Arijeet

  • SAP LSO: Training appraisal after 3 month

    Hi everyone.
    I know about the course appraisals directly after a training. Is there a possibility to automatically send out a second evaluation form to the participant after some time regarding training transfer (e.g. after 3 month).Would that be standard or enhancement?
    Thanks in advance

    Hi Nadja,
    Yes you can able to send the notification using a custom workflow. Please try to use BOR LSO_TRAINI for trigger element.
    Thanks & Regards,
    Ganesh R K

  • Manually populating appraisal values in IT7408/7409

    Hello Friends,
    We are on SAP ECC 6.0 EhP6.
    The employee appraisal processes are handled outside SAP and the appraisal ratings are provided. Our business requirement is to manually upload these ratings to Talent Management infotypes (7406, 7408, 7409).
    I understand that Talent Management infotypes are populated after Talent Review Meeting (TRM) is completed.
    Since we are not conducting TRMs, I would like to know if there is an alternate way by which we can manually populate the infotypes with values.
    I am thinking of using custom coding to achieve this functionality. Can you please let me know if this a feasible option.
    Any inputs/suggestions would be greatly appreciated.
    Regards,
    Arun.

    Hi,
    there is no manual way to update these infotypes. Potential is set via Manager Talent Assessment and can be modified in TRM. Performance is set by Performance Management process.
    If you want to update the Infotypes 7408/9 please use function module:
    HRTMC_POTENTIAL_UPDATE
    and
    HRTMC_PERFORMANCE_UPDATE
    These function modules use decupeled infotype framwork. This is recomennded for talent management. Do not use RH_INSERT_INFTY etc...
    You can use pernr or cp. This depends on your customizing and business needs. You can transfrom with following class:
    CL_HRTMC_CP_BASIC_UTILITIES=>convert_ids
    br
    Martin

  • Infotype Standard - How to modify?

    Hi,
    How to modify the screen of infotype standard? I need to include a field in the screen.
    Thanks,
    Daniel Sanchez

    Hi Daniel-
    dding fields to standard Infotype
    SAP allows you to add additional fields to any standard Infotype.
    Step 1
    Using transaction PM01 chose the 'Enhance Infotype tab' and press the create 'All' button.
    Step 2
    The following screen will appear allowing you to enter the new fields you wish to add to the Infotype.
    i.e. ZZSPINST and ZZBACS
    Step 3
    Once saved and activated the new fields will appear in the Infotype screen and database table (See below)
    Infotype screen(PA20)
    Infotype database table
    Go through this Url:
    HRABAP
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
    http://www.atomhr.com/training/Technical_Topics_in_HR.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    you can see some Standard Program examples in this one..
    http://www.sapdevelopment.co.uk/programs/programshr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
    These are the FAQ's that might helps you
    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapgenie.com/faq/hr.htm
    ***********Rewards some points if it is helpful.
    Rgds,
    Shakir

  • Standard report for SAP HR Infotype 8 India

    Hi,
    I would like to know if SAP has provided standard report for infotype 8.
    1) I would like to download personal no wise wage type data from infotype 8 for a period.
    2) And I would like to compare the basic rate data prior to increment or promotion of a personal no?
    Can you please suggest a standard SAP HR report present in SAP 4.7?
    Shankar

    Hi,
    Use wage type repoter (TC-pc00_m99_cwtr) OR best to use ADHOC query (TC - PAAH)

Maybe you are looking for

  • How do you play music from a playlist on an iPhone without using WiFi and iCloud?

    I travel in a RV and frequently park in campgrounds that do not have WiFi. I've been told I can copy iTunes playlists (selected from my copied CDs on my Mac) onto my iPhone 5S. I can then, using a mini stereo jack go from the output on the iPhone to

  • Set text of container - javascript help, please!

    I have used Dreamweaver behaviours to "Set text of container" and make different writing appear inside a box when I click a hotspot. Now I want people to be able to click on the writing that just appeared and make more text appear in another box. Cou

  • Lion keeps switching between multitasking apps automatically

    Sometimes, I'm browsing the web, and Lion will slide back to my desktop, with the menu bar at the top of the screen (the white one) still showing Opera as the active application. Then, after a few seconds, it'll switch back. Then back again. It happe

  • Exchange server 2010 cached mode vs no cached mode

    I have end users who are experiencing when they start up outlook 2010 hanging outlook when they click on new email or respond to email. It last for about 3 to 5 minutes. Then the client works normally also if you wait for 5 minutes that issue does no

  • Match Certain word in a String

    Hi all, I'm actually doing a project regrading e-learning. And i'm suppose to create a set of questions for each topics using labview. So Is there any way that i can match certain word in the string to make sure that answer is correct? Cause i'm sure