SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

Similar Messages

  • JSPM patching issue after system refresh

    We have recently done a System Refresh of Java-Addin box from a source system whic was on SP-13 on to a  target system which was on SP-14.  
    After the refresh we found the target system is now on SP13.   When I tried to apply SP-14, JSPM reports that the patch is already applied.  How do I go about ? Does this mean that SP-14 is already existing.  How to make the system recognise that the current patch is on SP-13. What needs to be done?
    Thanks in advance.
    Umamahesh

    This is not a bug in JSPM,  if the System Refresh is done through SAPINST you shouldn't have such issues. 
    I think that since some of the files in J2EE are not updated after the manual system refresh and JSPM must be pointing to the earlier Patch level.  
    Especially files under  ..../bootstrap/SAP AG are not updated
    In JSPM by default the forcemode is disabled so given the manual way to enable the option
    Hope this is clear
    Regards
    Shaji

  • Transports Issue after system Refresh

    Hi All,
    Recently we performed a system refresh from our Production to Development system. It is SAP ERP 6.0 ehp5 system. The refresh was successful however we are seeing issues related to STMS.
    1. In our development system we are unable to use SCC1 to move transport from one client to another. The following is the dump.
    Category               ABAP Programming Error
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_SDB_ORA_PROGRAM_ERROR
    ABAP Program           CL_SDB_ORA_UPDATE_STATS=======CP
    Application Component  BC-DB-ORA-CCM
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SQL_EXCEPTION", which was raised in the program
    "CL_SQL_STATEMENT==============CP",
    specifically in line 24 of the (include) program
    "CL_SQL_STATEMENT==============CM008".
    The cause of the exception was:
    ORA-20003: Specified bug number (16470836) does not exist#ORA-06512: at
    "SYS.DBMS_STATS", line 23922#ORA-06512: at "SYS.DBMS_STATS", line
    23973#ORA-06512: at line 1
    2. We are not able to see the sub request record for the transports is missing in E070 table for the TRs which were created before refresh.
    Please provide your inputs and help us to resolve these issues.
    Thanks!

    Hi
    Why do you mean by "system refresh from our Production to Development system"
    DB copy or client copy ?
    Based on the problem you have it must have been a DB copy.
    As you might know this is not recommended by SAP, you should at least have exported the object versions as stated in the here under note.
    I hope your TMS domain controller was the production system...
    It is normal that you did loose data in the CTS tables as you overwrite all CTS tables with the data from production, thus orders created in DEV that were not released should have been erased.
    I'm afraid your problem could be tougher than a simple Oracle error...
    For the Oracle error could you try launching system statistic and see if you get the same error
    brconnect -u / -c -f stats -t system_stats
    Why did you perform that refresh, client copy could have been a safer alternative.
    Regards
    130906 - How can versions be transported?
    You want to copy the versions of the repository objects from one R/3 system into another, for example because you are planning to copy your production system to your development system.
    Such a procedure does not correspond to the strategy recommended by SAP, to always retain the development system.

  • License issue after System Restore

    Hello All,
    We are facing an issue while doing a system restore on Windows 2003 / MS SQL 2005 / SAP 4.7D EXT 110. We followed the System copy option using SAPInst to do our system restore. When SAPinst prompted for DB import we stopped the SAPINST Tool and started our DB restore using our backup tool. Once the DB restore was successfully done , we restarted SAPINST and tried to continue with the import. However in the POST DB load step it is giving us an error as below;
    ERROR
    MOS-01012  PROBLEM: 'C:\usr\sap\SID\SYS\exe\run/saplicense -R3Setup SID "S782KZCP" TRACE=2' returned with '-2' which is not a defined as a success code.
    Creating file C:\Program Files\sapinst_instdir\R3E47X2\COPY\IMPORT\SYSTEM\ABAP\MSS\NUC\DB\saplicense.log.
    Switched to user: sidadm.
    Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\COPY\IMPORT\SYSTEM\ABAP\MSS\NUC\DB.
    See 'C:\usr\sap\SID\SYS\exe\run/saplicense -R3Setup SID "6FJD2I4C" TRACE=2' output in 'C:\Program Files\sapinst_instdir\R3E47X2\COPY\IMPORT\SYSTEM\ABAP\MSS\NUC\DB\saplicense.log'.
    ERROR
    MOS-01012  PROBLEM: 'C:\usr\sap\SID\SYS\exe\run/saplicense -R3Setup SID "6FJD2I4C" TRACE=2' returned with '-2' which is not a defined as a success code.
    We upgraded the kernel to the latest version and have implemented the environment variables [ MSSQL_SCHEMA ; MSSQL_DBNAME; DIR_LIBRARY ; SAPLOCALHOST ; DBMS_TYPE etc ] . However that has not helped.
    The id that we have used for the installation is not the sidadm id but an administrator id.
    The saplicense.log simply reads as below;
    'Tue Apr 08 23:27:29 2014
    MtxInit: 0 0 0'
    When we do a sapilcense -show using the administrator id it gives us the below results;
    C:\usr\sap\SP1\SYS\exe\run>saplicense -show
    *** SAPLICENSE (Release 640) ERROR ***
        ERROR:   Connect to database failed
        DETAILS: DbSlConnect failed with return code 99
    SQL-ERROR 0 (check DB manual for explanation)
    So we logged in a separate session using sidadm and ran the same saplicense command. However we got the exact same output as above.
    Then we ran a R3trans -d using the sidadm id and we got the below output;
    This is R3trans version 6.13 (release 640 - 17.09.12 - 20:12:05 ).
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'HOSTNAME' DBNAME = 'SID'"
    R3trans finished (0012).
    The trans.log read as below;
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: line 23653. hr: 0x8000ffff Login failed for user 'DOMAIN\sidadm'.
    4 ETW000                                                                           30451  0.038630
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [OpenOledbConnection,line 23653]: Error/Message: (err 18456, sev 0), Login failed for user 'DOMAIN\sidadm'.
    4 ETW000                                                                              37  0.038667
    4 ETW000  [dev trc     ,00000]  Procname: [OpenOledbConnection - no proc]             12  0.038679
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [OpenOledbConnection,line 23653]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    4 ETW000                                                                             109  0.038788
    4 ETW000  [dev trc     ,00000]  Procname: [OpenOledbConnection - no proc]             14  0.038802
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              5268  0.044070
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             146  0.044216
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: line 23653. hr: 0x8000ffff Login failed for user 'DOMAIN\sidadm'.
    4 ETW000                                                                            2978  0.047194
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [OpenOledbConnection,line 23653]: Error/Message: (err 18456, sev 0), Login failed for user 'DOMAIN\sidadm'.
    4 ETW000                                                                              49  0.047243
    4 ETW000  [dev trc     ,00000]  Procname: [OpenOledbConnection - no proc]             14  0.047257
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [OpenOledbConnection,line 23653]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    Request you to kindly advise on how to resolve this issue. Is there an authentication mechanism ( similar to OPS$ in Oracle ) which is causing this issue in MSSQL.
    Thanking you in advance,
    Regards
    Surajit

    Hello Deepak and Matt,
    Firstly Thank you for taking an interest in my issue.
    @ Deepak - The SAP kernel is already at the highest level available i.e 640 Patch 414. I have also sseparately upgraded the dbsl , R3trans and tp executables.
    Gentlemen , I am unable to find any option as ' SAP tools for MS SQL ' in SMP. Also the SAPINST that I am using does not have an option ' database copy completion'.
    Please Note this SAPINST was downloaded from the Archive section of  SMP as 640 Inst master is no longer generally available.
    My system is ABAP only and Non Unicode.
    Request your guidance on how to execute / download this particular tool or option for my system release.
    Thanking you in advance,
    Surajit.

  • RSA1 issue after system refresh

    Hello all,
    I am not sure if this is the right forum for my issue but i will give it a  try. Here is my situtation:
    we recently refreshed our SDX sandbox apo system from DEV. No other systems in the group were refreshed , target systems or others were not refreshed in parallel. As a post refresh step, just like in BW, I had to go to RSA1> right click on the source sytem (pointing to old logical name DEVBI)> and then restore. So now, the new Sources sytem for SCM is supposed to be  Sandbox BI (SBI) which is fine ,and the source system connection is also working good. But when we perform search for SBI datasources in RSA1 .it display 2 entries for the same datasource..one with SBI source system (which is correct) and another one with old source sytem (DBI, which is incorrect).. So we see the duplicate entries for the same datasource with 2 logical system names (old+new). Also, we are unable to replicate datasources for the SBI source system, it says DBI source sytem does not exist. I am not sure why this DBI source system's logical still there. Can anyone please share if they have ran into similiar issues? if so How can i get rid of this old logcial names from RSA1 from datasources ,that is DBI.
    BTW, RABASIDOC and RSLOGSYSDEST table entries are showing correctly. Again, BW is the source system here.
    Thanks,

    Durgesh,
    Thanks for your suggestion. Actually I did run BDLS and didnt manually create the source system in RSA1. I just had to restore the existing one and everything went fine, the source sytem checks good. But the issue still exist. The old Source system Logical name (DEV BI) still shows when searching for datasources in RSA1, so the search result displays the same datasource entry twice one associated with old Source system LSN (DEV BW in this case) and another one asscociated with the correct Source system logical name. And when we try to replicate datasources it gives error "DEV BI source system does not exist". I checked all related tables  such as RSBASIDOC..and its showing correctly.
    Can anyone please suggest why there the old source system logical name is still coming up? and how can this be resolved? Thanks.

  • Wily introscope issue after System refresh in solman 7.1 Sp11

    Hello experts,
    Unable to remove old Production wily in quality system.
    An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
    Unable to unassign or delete old wily introscope
    Thanks ,
    Rahul Yedapally

    Hi Rahul,
    Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
    and all so make sure RFCs WEBADMIN , SOLMANDIAG and
    NONE are working fine in SOLMAN.
    Thanks,
    Prakash Reddy Maram

  • Logical System Conversion after system refresh failed

    Hello,
    Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the  job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
    02/18/2009 16:09:33 Job started                                                                     00           516          S
    02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
    02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
    02/18/2009 16:10:19 Job finished                                                                    00           517          S
    When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
    Any suggestions on this?
    Thanks,
    Mahesh

    Hi ,
    Rerun the BDLS again as this took very little time.
    When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
    May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
    Thanks.

  • SAP BC 4.7 system refresh

    Hi All,
    I have to go for a SAP BC 4.7 system refresh from production to quality.
    Can anybody please share any documents or steps to be followed doing it.
    Thanks
    Harshit

    Hello
    We will forward this thread to the [Netweaver Administrator |SAP NetWeaver Administrator; forum. Hopefully you will get a better response there.
    Regards
    XI/PI Moderator

  • After System Refresh Variants missing

    Hi,
    We have used Export / Import method to build QAS system from production
    ABAP export file.
    After System refresh we got the same Production client with all
    configurations, Variants, Object including data.. Which is Perfect.
    But, as per our business we don't want to use the same production
    client number in Quality System., so we done Cliet Copy to copy to
    different client (ex: Client 200) using SAP_ALL profile.
    Question: But after client copy we found that some Data, Objects,
    Variants are missing in the new client (200).
    Ex: In Client 100 (Copy of production client) table T009 is having 10
    entries, but after client copy in client 200 the same table doesn't have any
    entry in that including standard and Z.
    Please help me on this, how do I get clone / copy of 100 client
    (original client)
    Thank You,
    Ramesh

    Hi Ramesh,
    Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
    You can try Remote client copy method .
    You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
    You can use the below forum procedure to export and import variants.
    how to export RFC destination to file in order to import it in an other sys
    Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
    Regards,
    Arjun

  • Large numbers of workflows appearing in SAP Inbox after system refresh

    Hi all,
    We are having an odd issue where after we perform a system refresh of our PR system to QA, a massive number of Business 23,000+ appear in the SAP Inbox of certain users who are registered as agents.
    We understand how to delete the workflows but want to understand the process of why they keep appearing, and whether this is a system error or a symptom of a user/batch process during or after the refresh.  The workflows do NOT appear for these users in the PR system.
    95% of the notifications are flagged "Error when generating IDoc from MC Document."
    I have been reviewing the Workflow wiki but have yet to find anything pertinent yet.
    http://wiki.sdn.sap.com/wiki/display/HOME/3.Administrationand+Troubleshooting
    Any help with this or applicable SAP Notes would be greatly appreciated.
    Thanks!
    Edited by: Ben Daniels on Dec 6, 2010 11:21 AM

    Hi,
    As the error message, those workitems are generated when system trying to generate IDocs.
    And the reasons why all workitems are sent to all users is, the task is marked as general task.
    What i would suggest is, select any of those workitem, go to its workflow log & analyze which workflow generates these workitems in what case and proceed accordingly.
    Regards,
    Raj

  • License Error after system copy

    Hi,
         After system copy licensing the sap giving this error.
    MLICHECK0 in *LIBL type *FILE not found.            
    MLICHECK__0 in *LIBL type *FILE not found.          
    MLICHECK~I1 in *LIBL type *FILE not found.          
    MLICHECK in R3BDDDATA type *FILE already exists.    
    Alternative name for file MLIC0002 not allowed.     
    "MLICHECK~0" in R3BDDDATA type *FILE already exists.
    Help me to solve the issue.
    Thanks and Regards
    G Singh

    Hi G Singh,
    this error message "smells" extremly like RCLSTG *DBXREF !
    If this problem is still your pronblem, I would run this command - in restricted mode - takes only about 30-60 minutes ...
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • Unable to login in EP 6.0 after system refresh

    After performing the system refresh of EP 6.0, completed the post system copy steps.
    Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
    please help me what could be the reason.

    Hi Abdul.
    I think you have selected the Algorithm as RSA, which is the default one.<br />
    Please change it to DSA and hope the issue will be solved.
    Regards,
    Satish

  • Windows 8.1 will not activate on HP19-2113w after system refresh.

    Everything was working fine on my PC.  Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully.  Therefore I did a system refresh thru HP recovery.  After doing that windows would start up normally, but I lost my activation.  When I tried to activate the response was "Key doesn't work try again later" or something like that.  Kept trying, no luck.  I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data).  Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears.  I can get to activation using command prompt.   but key still does not work.  The key I am using I retrived from my BIOS data.  Also, I ran the refresh and reset from the origional hard drive partition.  I hope someone has a solution to this.  Thanks is advance Bill   

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • Sender File Comm Channel Fails after system refresh

    Hi,
    we did a system refresh of our PI system and since then the sender file communication channels donot work with the following exception:
    Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
    I have seen many threads in this forum related to this issue but couldn't find a proper solution.
    Any help is very much appreciated.
    Thanks
    MLS

    You may do the following:
    1. Perform SLDCHECK on XI.
    2. Check if XIAFUSER is not locked or its password has been changed recently.
    3. Goto SLD-> Business sytems-> Integration server, check Pipeline URL. It should be
    http://hostname:8000/sap/xi/engine?type=entry
    Regards,
    Prateek

  • Adding transports to import queue after System Refresh

    Hello All,
    Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
    But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
    So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
    Extras---->other requests -
    > Add. doing same for 150 times. cant even imagine dat work.
    So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
    Some where i read like transport buffer in the path  /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
    So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
    Please suggest or give me a correct solution.
    Regards,
    Ravi

    Thanks a lot for your reply.
    I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
    But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
    Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any  problems faced while forwarding requests.
    Bcoz in our landscape , transport route is as below
    Dev to QA and Sandbox then from QA transports will move to Production.
    So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
    Regards,
    Ravi

Maybe you are looking for