SAP MDG - Cleasing Case - For Materials?

Hi there,
is it possible to use classing cases for materials or is just possible to the doublet search?
Best Regards:
Per

Hi Amar
Please refer SAP help from below links
SAP Master Data Governance 6.1 – SAP Help Portal Page
SAP Master Data Governance - SAP Library

Similar Messages

  • SAP MDG - Cleasing Case

    Hi There,
    I would like to use the "merging" - classing case functionality vendor. But what happens with the related object to the merged vendors. Meaning when I have invoices or other object. Will these get the new Vendor number or how is it showed that these are merged?
    Best Regards.
    Per

    Hi Durgesh,
    Please check the following thread..., could be helpful..
    BRF+ and exception handling in procedure call expressions
    Regards,

  • UI configuration in SAP MDG 7.0 for Financial

    Hello all
    Now I'm working in sap MDG 7.0 SP2 for Financial. I want to create UI configuration based on change request step.
    I copied standard ui configuration for Cost center MDGF_0G_OVP_CCTR into Z configuration. I also configured Properties of change request step
    and link logical action, but when I create cost center, my change request form is missing.
    Please help to find out,maybe I missed some step...
    Regards
    Firmansyah WH

    Hello Firmansyah
    Please find answer to your queries. As suggested by Marcus, don't copy the UI unless its really required.
    1. Requester fill cost center description - Create a change request type with CCTR / CCTRH and CCTRG added in it. Don't select single object or object required. When requester will create a request for cost center, they will able to fill up only description.
    2. When the request is with approver, they can change any field if the request is not read only. You can either give read only access or give full authorization. These are the only 2 options available and I feel its valid.
    Kiran    

  • Use cases for the SAP HANA Appliance for SAP FI-Accts.Payable

    Hello SAP HANA friends:
    Are there any compelling use cases for the SAP HANA Appliance for SAP FI-AP Accounts Payable module?
    CO-PA and CRM have many immediate use cases, but I'm looking for the use case for Accounts Payable,
    either from a cash flow perspective or performance.
    Any and all comments are appreciated.
    Regards,
    Joe Gonzales
    856 912 1136

    Hi,
    In SQL console please execute below query .
    GRANT SELECT ON SCHEMA <schema Name> TO "_SYS_REPO";
    BR
    Sumeet

  • Career in SAP MDG for functional consultants.

    Can a functional consultant with no ABAP skills learn MDG  ? What skills are required to become MDG consultant ?

    Hi Kanishk,
    Yes functional consultant can take SAP MDG and work on that.  It is just configuring and mapping master data according to different SAP and Non-SAP systems master data.  The market is very slow in MDG because big companies only want to implement for master data harmonization due to heterogeneous environment.  If you do a job search, companies posted only less jobs.  Think before you take the decision but if you stand for 5 years down the line this MDG will have a big market in the world.  So you need a patience if you are taking this module.
    Regards
    RC Gopi

  • Test Script/case for checking Securities in SAP BW-7.3

    Hi All,
    Please  test script/case for testing securities/authorizations in BW-7.3 after upgrade.
    Basically we have upgraded from BW-3.5 to BW-7.3 and as securities concepts got changes we need to test for the same.
    Thanks.
    Regards,
    Manju

    hi,
    one more thing i will like to add here is in BW 7.3 you get a new security admin feature that allows you to make mass changes to authorizations instead of one-by-one. This can be done by cut-and-paste in a worklist, hierarchy nodes, and you can also add users to multiple analysis authorizations.
    The u2018newu2019 authorizations has both the data value and hierarchy restrictions. You can still build using the u201CRSECADMINu201D transaction
    Also make sure that all objects are in the TLIBG library and they will be 'shielded' during the upgrade.
    regards
    laksh

  • Terms and conditions for materials

    How do the Terms & Conditions appear in SAP.MM when a materials order gets cut?
    Can SAP handle multiple legal Terms & Conditions?
    One set of Terms & Conditions for materials orders and another set for service orders??

    We had implemented a similar requirement at a client.
    The solution is as follows:
    Have separate document types for Materials and Service POs.
    Create separate standard texts (tcode SO10) for the legal terms and conditions for materials and service POs. Use them while printing.
    In our case, we had separate legal terms and conditions based on material or services, the company code, etc. We had standard texts for all these and controlled it in SAP script (Version 4.6C).
    Hope this helps,
    Lakshman

  • SAP MDG step to step guide

    Hi Friends,
    I am new to SAP MDG area, Can any one suggest or share step to step sap mdg learners guide. It is very important to me to update knowledge in this area. I've checked to so many documents in google search - but i failed to understand process configuration in required order. So, can anyone help me on this any end to end guide for SAP MDG. If it is materials, financials anything is fine.
    Thanks,
    Amar

    Hi Amar
    Please refer SAP help from below links
    SAP Master Data Governance 6.1 – SAP Help Portal Page
    SAP Master Data Governance - SAP Library

  • Report for Materials expired with price on Purchase Info Record

    Hi Experts,
    Can anyone of you advice a report in SAP that can identify the materials where the price has expired on Purchase Info Record.
    Thanks in advance.
    Regards,
    Nagarjun

    HI,
    ME1P will be used to monitor the changes in terms of pricing conditions you made to your info record via Transaction MEKP.
    In case of SA, you will have to build up your simple query by joining two tables A016 and KONP.
    Regards
    KK

  • Design the New process set up for Materials in one physical stock plant

    Hi Experts,
    The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
    Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
    Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the  new organization set up. These backlogs are very long at least three to four years.
    We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
    We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
    can any one please tell me how we can maintian this setup in the system.
    Please provide your valuable inputs.
    Brgds,
    RK

    RK,
    Sorry, the creation of such an end-to-end solution is outside the scope of an online forum.  Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
    Sales order availability checking is described in SAP online help
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
    I will say this.  If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40).  This based on a very small knowledge of your requirements.  I have already cited the Sap online help for special procurement.
    SAP online help for Warehouse management is at
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
    As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person.  I again suggest that you search for professional consulting services to assist you in this project.  It will be money well spent.
    I am now closing my responses to this thread.  Good luck in your project!
    Best Regards,
    DB49

  • High Availability Test Cases for ECC6.0, PI 7.0, BI 7.0???

    Dear All
    I am in a pretty difficult situation here. I have to write test cases for the components in the High Availability environment. We are running AIX 5L with HACMP/XD clusters ACTIVE/PASSIVE setting. The following components are in the landscape, ECC6.0, PI 7.0 BI 7.0 cFolders 4.0 Portal 7.0 SLD 2004s and Solman 4.0. I have to write test cases for the above components especially ECC, PI BI and cFolders in the HA environment as to
       1.<b>WHAT WILL BE THE EFFECT ON OTHER COMPONENTS IF ECC</b> <b>FAILOVER  and so on for PI and BI</b>,
       2. How do I check the consistency of the system after a failover, since the time for a failover will be anywhere between 3 - 4 mins.
    Can anyone pls give me a 5 or 6  checks like
    Checking RFC connections
    ABAP dumps
    Consistency check (txn: SICK)   and so on
    In the test cases I have to make sure that after a failover the system is up and ready to perform the activities that it was able to before the Failover......
    Will appreciate any suggestions and will definitely reward points for any helpful answers....Thanks in advance.

    Hi Shailesh,
    If you want you can activate SCM_SNC_GEN_1 depending upon business needs or configuration.
    As per my understanding there is no need to activate any business function but if you need additional feature of SNC to be used then refer below help link for more details:
    http://help.sap.com/saphelp_SNC700_ehp01/helpdata/en/a2/6d67d9b60149cb887acf72ae0b90ac/frameset.htm
    In ECC you are going for EPh5 which means no need to activate any additional business function(Normally SNC needs EPh4 only for some the latest feature to be use like in workorder collaboration ManufacturingWorkOrderInformation and ManufacturingWorkOrderProductionProgressNotification XML are used if ECC is with EPh4)
    Regards,
    Nikhil

  • SAP mail not received for transfer order errors in background

    Hi All,
    We need to set up automated mails to SAP inbox in case there is any error during automatic TO creation in the background. The customizing for this has been done. Now in OMKX for MAIL messages we have two options, either tick the document user or put a user id in the recepient field. If I put a user id in the recepient field the user gets the job spool in the inbox everytime the job is run. However when the 'document user' box is checked it does not send the notification to the inbox of the user who had created the material document when there is some error in the TO creation background job. The mail control indicator 'A' has been set up in OMKX under both MAIL messages and movement types. Am I missing some setting? Note that auto TO creation is successfully happening in background so all its relevant settings are in place.

    I have just scanned down 9 pages in the discussion and found a discussion thread already running for my problem with google mail....... http://discussions.apple.com/thread.jspa?threadID=874063&tstart=120

  • Defining Accounts for Materials Management

    Dear sir,
    Now, I have to Define Accounts for Materials Management, but I dont know what are procedure or group to match my account number. Can you explain the definition of following procedure:
    Expense/revenue from consign.mat.consum
    Expense/revenue from stock transfer
    Subsequent settlement of provisions
    Subsequent settlement of revenues
    Provision differences
    Inventory posting
    Change in stock account
    Inventory posting
    Revaluation of other consumables
    Del credere
    Materials management small differences
    Purchase account
    Purchase offsetting account
    Offsetting entry for inventory posting
    Account-assigned purchase order
    MM exchange rate rounding differences
    Differences (AVR Price)
    Cost (price) differences
    Price Differences (Mat. Ledger, AVR)
    Price differences (cost object hierarc.)
    Price Diff. from WIP Written Off (Mat.)
    Product cost collector price differences .....
    Many other, but you can explain some and give me example, and step by step giude me setup
    Thank you very much
    Faithfully,
    Hangvt

    Hi,
    Some of the companies are having a practice of paying payables with the rounding off rules. This rounding of in India could be from Rs.0.01 to Rs.10.00. For examble, there is a payable amount of Rs.125125.25 this can be rounded off to Rs.125125.00 or Rs.125130.00 while making payment. The balance amount should hit the rounding off difference account.
    The same things is applicable for receivables also.
    Over/under payment GL can be configured by using T Code OBXL
    There is an another use, for details see the below link,
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9b9a6455711d182b40000e829fbfe/frameset.htm
    There may be some more reason where you need to do this configuration,
    Disc. difference
    Incorrect cash discount rate
    To be paid without deduction
    Credit memo without backdated cash disct
    Cash discount period exceeded
    Reduction without doc.number allocation
    Incomplete payment advice note
    Payment amount is different
    Debit reduced not paid
    Debit reduced not paid
    Reduced twice
    Paid not reduced
    Damaged goods - disputed
    Goods damaged during transport
    Quant.delivered not same as order quant.
    Freight charges not paid
    Miscellaneous deductions
    Price variances - disputed
    Partial payment
    Returns
    Residual item creation
    Trade Promotion
    Payment differences on debit side
    Hope it clears your doubt.
    Regards
    A.Saravanan.

  • To find Pricing Record for Materials for which Pricing has not been upload.

    Hi All,
    Is there a way in SAP SD to find the Materials without Pricing in VK13.
    Please suggest your valuable inputs or I need to for a Z Report.
    Thanks,
    Parag.

    Hi Parag,
    The only other way is write a z-report which picks up materials based on a combination of MARA and MVKE( since you mentioned sales org and dist channel validation)..the selection screen should have sales org, dist channel as parameters and probably condition type also..use as many selection parameters as possible on the screen.
    and for the materials, sales org, dist channel, condition type with application as V, you should pick up values from A004..
    but is that the only key you're using ..if not then consider using AXXX table for different key combinations..but this is still clumsy/time taking..I would suggest leave it to the ABAPer for the performance part.
    However,I've one question.. you said pricing has not been uploaded? what does it mean? not yet created through VK11? so how can you find them even in A004? am little lost..?
    Regards
    Raghu.
    Edited by: Rags on Sep 14, 2011 9:36 AM

  • SAP generating invalid XML for ORDERS05 IDOC

    We have XI 3.0 SP 20 installed here.
    I just started working with XI/PI, so bear with me if this has been asked - I already searched SAP for a note on this and couldn't find one.
    We have integrated sales orders into another system - we have SAP generating an IDOC to be sent when a sales order is created.  We use XI to route it to a 3rd party provider.
    The problem that is occuring is that if an item on the order has an ampersand in the description, the system receiving it tells us that the XML is in error.  In examining the message, it is in error as it doesn't properly escape the ampersand.
    Is there a workaround or patch for this?
    Also - it's not XI that is complaining about the issue, it's our 3rd party provider that is.
    Edited by: Bruce Hartley on Dec 22, 2010 9:34 AM

    Stefan and Abhishek;
    I read the blog - and unless SAP support does not have a fix for issue, I'm not going to use the suggestion in the blog for the exact reasons pointed out by Stefan in the most recent comment.  I have opened a case for this with SAP support and when I get a resolution on it that is not covered by the blog post I will post it here.
    To me, this should work out of the box by SAP and I shouldn't have to write code to work around it.  We're not doing anything fancy or special, we just want to send the order to the 3rd party system via an IDOC interface.  If I was generating the XML by myself, then I would have to convert the stuff.
    I don't think we have < or > in our item descriptions, but I'm sure we have quote characters in there as well.
    We have other systems we use XML with and we did have this issue a long time ago and since I was the one doing the programming and had total control over the process, I was the one who had to fix it - so at least I was aware of it.

Maybe you are looking for