SAP MRS Assignment Issue!

Hi,
I have an Issue after upgrading to MRS 900.
I have an order created and the opertaions are having different Control Keys
Operation 10 - Control Key Z001
Opertioan 20 - Control Key ZFAC
Operation 30 - Control Key Z001
In the configuration i allowed Scheduling for operations only with Control Key Z001, it is perfect only the operation control Key Z001 is flown to MRS planning board. that is operation 10 and 30.
When i do the assignment in planning board for operation 10, the assignment remains after saving the planning board which is correct.
when i do the assignment for the operation 30 for the same or different resource, it gets assgined and when i save the planning board assignment disappears.
The problem is for the subsequent operations of the operation with Control key ZFAC. So able to schedule 10 and unable to schedule 30.
Rgds
Sudhir

Hi,
  implement the Note - 2038445
Rgds,
Sudhir

Similar Messages

  • SAP-MRS, What is capacity pots

    Hi All
    We have  implemented SAP MRS/ Multi Resource scheduling along with SAP-Plant Maintenance in EHP6 SAP GUI.
    I 've a doubt & 'm not getting clarified on some certain areas reagrding MRS / Will anyone update us with the below given queries?
    What are Capacity pots & the various aspects of a RFC behavior of Capacity Pots?
    Please explain in brief regarding RFC behavior & Capacity pots
    Thanks & Regards
    Arnab Lahiri
    SAP SupplyChain Consulting
    SAP Plant Maintenence/PM

    This is one of the hottest area in SAP MRS
    Capacity Pots enables appointment booking functionality to book jobs of a certain job type without assigning directly a resource.
    The actual assignment between the created appointment and the appropriate resource is done with MRS functionality
    either manually or by optimizer.Capacity Pots have basic availability maintained at work center level with respect to job type
    which requires qualification of the resource. Resource with multiple qualifications can be hierarchically mapped based on customizing.
    Capacity of resources are maintained as full day pot and subsequently hourly based slots can be configured in customizing
    “Maintain Capacity pot Time Intervals”The Capacity Pot can be updated for work center and Qualification Category with the Availability.
    The Capacity pots get updated when a service order is created and integrated into MRS / when assignment is saved in the planning board
    (manually or through optimizer).
    Hope this give you clarity if not please get back.

  • SAP MRS product features and modules integrated

    Hi
    Looking for SAP MRS product details with modules integrated
    Regards,
    Parameshwar

    Yes i possibly feel there are some more services which are not activated in the system.
    Try using Transaction NWBC in SAPGUI & then follow the various Applications to to reach to appointment booking.
    Once NWBC opens follow the service advisors cockpit. /DBM/SERVICE_ADVISOR.
    Step by step it will first ask you to search vehicle / customer & then once vehicle is searched you can continue to proceed to appointment application to book an appointment
    Ensure the master data is set up for the vehicle & customer to be able to search in the service advisors cockpit
    Ensure you have all the roles of the assigned to your user id these application appear in the your users menus.
    Regards,
    Sachin Balmiki

  • SAP MRS -  Multi Resource Planning Tool

    Hi All,
    I am looking for 'introductionary' information on the SAP MRS tool. There is a thread already on this tool but it does not give basic data about functionality and implementaion etc.. (below)
    MRS (Multi Resource Scheduling)
    Does anyone have a link that give a functional spec and data sheet on the tool? An 'MRS Guide for dummies' would be great but I will take what I can get....
    The context of usage will be in connection with scheduling service technicans for CS service orders.
    With Thanks,
    Rory
    Edited by: Rory.Moore on Feb 23, 2011 11:19 AM

    Hi PSP,
    Many thanks for that. I had already searched ther SAP help Library but now realise I was searching using incorrect terminology. I will read through the info and will no doubt have more specific questions to come!
    I have implemented various scheduling tools in other ERP systems before and would like to use the 'out of the box' functionality in SAP as much as possible. I need to get to grips with the configuration possibilities for use in the PM module and specifically for service orders, contract maintenance (external custoemr functional locations etc).
    Will get back later today..
    //Rory
    Edit:
    A silly question perhaps, but is this the same tool as found here?
    http://www.oasisconsultants.com/images/Articles/resource_planning.jpg
    and here?
    http://www.youtube.com/user/SAPMRSExpert
    Edited by: Rory.Moore on Feb 23, 2011 1:24 PM

  • Collection assign issue in OID provisioning environment

    Hy Tom,
    I am interested in LDAP with OID PROVISIONING in portal 10g application.
    we create a register procedure.
    however. i got an error message as ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
    After debuging, we found that issue result assign null value .
    when we assign as
    user_vals(counter2) := entry.attr(counter1).attrval(counter2);
    It seems that that we can not assign entry.attr(counter1).attrval(counter2) to other var two time in procedure.
    It is server configuration issue or code issue.
    Thanks
    Newweber
    *********************** Code
    PROCEDURE pre_add (     ldapplugincontext IN ODS.plugincontext,
                   dn IN VARCHAR2,
                   entry IN ODS.entryobj,
                   rc OUT INTEGER,
                   errormsg OUT VARCHAR2
    IS
    ret                INTEGER;
    l_portal_user      wwsec_person.USER_NAME%type;
    l_first_name      wwsec_person.FIRST_NAME%type;
    l_last_name      wwsec_person.LAST_NAME%type;
    l_email      wwsec_person.EMAIL%type;
    l_work_phone      wwsec_person.WORK_PHONE%type;
    l_mobile      wwsec_person.MOBILE_PHONE%type;
    counter1           pls_integer;
    counter2           pls_integer;
    retval                pls_integer := -1;
    s                integer;
    user_session           DBMS_LDAP.session;
    user_dn           varchar(256);
    user_array           DBMS_LDAP.mod_array;
    user_vals           DBMS_LDAP.string_collection;
    user_binvals           DBMS_LDAP.blob_collection;
    indx                number := 1;
    BEGIN
    l_portal_user      :=null;
    l_first_name      :=null;
    l_last_name      :=null;
    l_email      :=null;
    l_work_phone      :=null;
    l_mobile      :=null;
    l_description      :=null;
    rc := 0;
    errormsg :=null;
    -- Create a mod_array
    user_array := dbms_ldap.create_mod_array(entry.binattr.count + entry.attr.count);
    -- Create a user_dn
    user_dn := substr(dn,1,instr(dn,',',1,1))||'cn=users,dc=e-hms,dc=net';
    FOR l_counter1 IN 1..entry.attr.COUNT LOOP
         FOR l_counter2 IN 1..entry.attr(l_counter1).attrval.COUNT LOOP
         ckerror('second loop get value--'|| entry.attr(l_counter1).attrname || '[' || l_counter1 || ']' ||'.val[' || l_counter2 || '] = ' ||entry.attr(l_counter1).attrval(l_counter2));                                   
    if entry.attr(l_counter1).attrval(l_counter2)     is null then
    ckerror('handle null attribule ');
    else                    
    -- get value
              ckerror('get value2'||entry.attr(l_counter1).attrname);
    IF entry.attr(l_counter1).attrname ='givenname' then           
                   l_first_name :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('givename/firstname--'||l_first_name);
         elsif entry.attr(l_counter1).attrname ='sn' then           
                   l_last_name :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('sn/lastname--'||l_last_name);
              elsif entry.attr(l_counter1).attrname ='mail' then
                   l_email := entry.attr(l_counter1).attrval(l_counter2);
                   ckerror(' email--'||l_email);
              elsif entry.attr(l_counter1).attrname ='mobile' then           
                   l_mobile :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('mobile--'||l_mobile);
              elsif entry.attr(l_counter1).attrname ='telephonenumber' then           
                   l_work_phone :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('work telphone--'||l_work_phone);
              elsif entry.attr(l_counter1).attrname ='cn' then           
                   l_portal_user :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('cn/username--'||l_portal_user);
              elsif entry.attr(l_counter1).attrname ='description' then           
                   l_description :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('description--'||l_description );
              else
              ckerror('handle other entry name--'||     entry.attr(l_counter1).attrname);
              ckerror('handle other entry--'||entry.attr(l_counter1).attrval(l_counter2) );
              end if;
    end if;
    ckerror('end compare at second loop');
    ckerror('NULL ASSIGN ISSUE FOR 72 --'||entry.attr(counter1).attrval(counter2));
    user_vals(counter2) := entry.attr(counter1).attrval(counter2);
    END LOOP;
    ckerror('end first loop');
    --- put ldap
    dbms_ldap.populate_mod_array(user_array,DBMS_LDAP.MOD_ADD, entry.attr(counter1).attrname,user_vals);
    user_vals.delete;
    END LOOP;
    processs other (l_firstname...) vars in SQL sataement
    EXCEPTION
    WHEN OTHERS THEN
    ckerror( 'Exception in PRE_ADD plugin. Error code is ' || TO_CHAR(SQLCODE));
    ckerror( ' ' || Sqlerrm);
    rc := 909;
    errormsg := 'Error code:'|| rc||' exception: pre_add data';
    END;

    Hy Tom,
    I am interested in LDAP with OID PROVISIONING in portal 10g application.
    we create a register procedure.
    however. i got an error message as ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
    After debuging, we found that issue result assign null value .
    when we assign as
    user_vals(counter2) := entry.attr(counter1).attrval(counter2);
    It seems that that we can not assign entry.attr(counter1).attrval(counter2) to other var two time in procedure.
    It is server configuration issue or code issue.
    Thanks
    Newweber
    *********************** Code
    PROCEDURE pre_add (     ldapplugincontext IN ODS.plugincontext,
                   dn IN VARCHAR2,
                   entry IN ODS.entryobj,
                   rc OUT INTEGER,
                   errormsg OUT VARCHAR2
    IS
    ret                INTEGER;
    l_portal_user      wwsec_person.USER_NAME%type;
    l_first_name      wwsec_person.FIRST_NAME%type;
    l_last_name      wwsec_person.LAST_NAME%type;
    l_email      wwsec_person.EMAIL%type;
    l_work_phone      wwsec_person.WORK_PHONE%type;
    l_mobile      wwsec_person.MOBILE_PHONE%type;
    counter1           pls_integer;
    counter2           pls_integer;
    retval                pls_integer := -1;
    s                integer;
    user_session           DBMS_LDAP.session;
    user_dn           varchar(256);
    user_array           DBMS_LDAP.mod_array;
    user_vals           DBMS_LDAP.string_collection;
    user_binvals           DBMS_LDAP.blob_collection;
    indx                number := 1;
    BEGIN
    l_portal_user      :=null;
    l_first_name      :=null;
    l_last_name      :=null;
    l_email      :=null;
    l_work_phone      :=null;
    l_mobile      :=null;
    l_description      :=null;
    rc := 0;
    errormsg :=null;
    -- Create a mod_array
    user_array := dbms_ldap.create_mod_array(entry.binattr.count + entry.attr.count);
    -- Create a user_dn
    user_dn := substr(dn,1,instr(dn,',',1,1))||'cn=users,dc=e-hms,dc=net';
    FOR l_counter1 IN 1..entry.attr.COUNT LOOP
         FOR l_counter2 IN 1..entry.attr(l_counter1).attrval.COUNT LOOP
         ckerror('second loop get value--'|| entry.attr(l_counter1).attrname || '[' || l_counter1 || ']' ||'.val[' || l_counter2 || '] = ' ||entry.attr(l_counter1).attrval(l_counter2));                                   
    if entry.attr(l_counter1).attrval(l_counter2)     is null then
    ckerror('handle null attribule ');
    else                    
    -- get value
              ckerror('get value2'||entry.attr(l_counter1).attrname);
    IF entry.attr(l_counter1).attrname ='givenname' then           
                   l_first_name :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('givename/firstname--'||l_first_name);
         elsif entry.attr(l_counter1).attrname ='sn' then           
                   l_last_name :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('sn/lastname--'||l_last_name);
              elsif entry.attr(l_counter1).attrname ='mail' then
                   l_email := entry.attr(l_counter1).attrval(l_counter2);
                   ckerror(' email--'||l_email);
              elsif entry.attr(l_counter1).attrname ='mobile' then           
                   l_mobile :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('mobile--'||l_mobile);
              elsif entry.attr(l_counter1).attrname ='telephonenumber' then           
                   l_work_phone :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('work telphone--'||l_work_phone);
              elsif entry.attr(l_counter1).attrname ='cn' then           
                   l_portal_user :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('cn/username--'||l_portal_user);
              elsif entry.attr(l_counter1).attrname ='description' then           
                   l_description :=entry.attr(l_counter1).attrval(l_counter2);
                   ckerror('description--'||l_description );
              else
              ckerror('handle other entry name--'||     entry.attr(l_counter1).attrname);
              ckerror('handle other entry--'||entry.attr(l_counter1).attrval(l_counter2) );
              end if;
    end if;
    ckerror('end compare at second loop');
    ckerror('NULL ASSIGN ISSUE FOR 72 --'||entry.attr(counter1).attrval(counter2));
    user_vals(counter2) := entry.attr(counter1).attrval(counter2);
    END LOOP;
    ckerror('end first loop');
    --- put ldap
    dbms_ldap.populate_mod_array(user_array,DBMS_LDAP.MOD_ADD, entry.attr(counter1).attrname,user_vals);
    user_vals.delete;
    END LOOP;
    processs other (l_firstname...) vars in SQL sataement
    EXCEPTION
    WHEN OTHERS THEN
    ckerror( 'Exception in PRE_ADD plugin. Error code is ' || TO_CHAR(SQLCODE));
    ckerror( ' ' || Sqlerrm);
    rc := 909;
    errormsg := 'Error code:'|| rc||' exception: pre_add data';
    END;

  • Authobject for SAP collaboration assignment block in Solman 7.1

    Hi Guru,
    I am trying to find the authorisation object for edit option in SAP collaboration assignment block in Solman 7.1.
    The edit button is disabled.
    I could not find it through trace as it was greyed out.
    Could you please suggest which authorisation object is used for this.
    Regards,
    Pooja

    Hi,
    Please see if this can help you ...
    The Request for Change in Solution Manager 7.1 has a new screen area to define the scope. This new area is the scope assignment block.
    The Request for Change in Solution Manager 7.1 offers inside the Scope assignment block the possibility for several follow up documents also of different types. The field subject is obsolete in Solman 7.1 it was replaced by the change category of the scope assignment block.
    To define which change categories are valid you can perform the following customizing.
    SAP Solution Manager Implementation Guide - SAP Solution Manager - Capabilities (Optional) - Change Management - Standard Configuration - Change Request Management Framework - Make Settings for Change Transaction Types
    Choose SMCR Request for Change or your corresponding customer specific request for change and then double click on u201CCopy Control Rulesu201D in the left navigation area.
    Here you can define which follow up documents (also your own Z & Y Types) you want to allow in the scope as change category as well as define which information of the request for change shall be automatically copied. e.g. priority, text, date, attachments, context.
    Let me know if you need any further clarifications...
    Thanks,
    Ravi

  • Qualification Catalog and Matrix Load (SAP MRS)

    We are looking to load Qualification Catalog and Matrix using excel/csv file, in SAP MRS.
    Any BAPi/function module that we can refer to.... Any other inputs/pointers on developing this load program - please share...

    Yes, we were able to load using standard FMs...
    Qualification Catalog (using Function Module /MRSS/SQM_API_CAT_CREATE)
    Qualification Matrix (using Function Module /MRSS/SQM_API_MAT_CREATE)

  • Could you please help me finding SAP MRS Implementation Guide ?

    Hi Varun,
    i am new to MRS and I am recently into MRS7,0  Implementation for one of my Project relating to Utility sector.
    Could you please help me finding SAP MRS Implementation Guide ? I was searching in sap market place but could not able to locate it.
    In additon to this please do help me where i can get the Best practice documents relating to SAP MRS7,0. I was searching in the SAP Market place but could not able to locate it as well.
    Thanks for your help advance...
    thanks & Best Of Regards,
    Sudhir Mishra
    Denmark

    Check this link
    http://www.tacook.co.uk/media/bilder/Workshop%202%20-%20SAP%20AG(1).pdf
    Also joint discussions in this link
    MRS (Multi Resource Scheduling)
    Edited by: Jeyakanthan A on Apr 21, 2010 3:08 PM

  • SAP EHS Safety Issue mobile app on SMP 3.0

    Hi,
    I'm on the process of installing and configuring the SAP EHS Safety Issue mobile app on SMP 3.0. However, the current Administrator guide hasn't been updated since SMP 2.3.
    Has anyone attempted to install this app on SMP 3.0? Any idea how this should be configured? Should it use the SAP Management Console or the Gateway Management Cockpit?
    Also, does anyone has previous experience working with this app? How can I test the OData services without going through SMP?
    Kind regards,
    Omar

    For anyone interested, here's some details:
    The HTTP method implemented by the service is: http://<SAPserver>:8000/sap/opu/odata/EHSMM01/LWM_SAFETY_OBSERVAT
    When you configure the app, you need to set this up as your backend endpoint. You can also set this up as your HTTP authentication for your security profile.
    You don't need to use the Gateway Management Cockpit. Just create an application with app ID:
    com.sap.bsuite.erp.ehsm.safetyobserver
    and use the above information for the backend and security profiles.
    That's all!

  • SAP IDM 7.1 Role assignment issue

    Hello IDM Experts,
    I am facing one critical issue here. We have connected SAP GRC with SAP IDM for risk analysis and CUP approvals and then once the approvers have approved the requests, IDM assigns these approved roles to users in backend SAP Systems.
    We are now facing issue here past 1-month. Before we never faced this issue.
    The issue is when the Roles are approved from GRC-CUP AC 5.3, post the approvals, the IDM is pulling the data and some of the roles are not getting assigned in SAP Backend systems. In the 1st and 2nd attempt it is not getting assigned however sometimes in the 3rd attempt it is getting assigned. This kind of weird behavior we have come across first time.  Has anyone come across such issues before?
    What could be the possible reason for the roles not getting assigned in SAP Backend system from IDM?
    We checked everything right from dispatchers, connectors, workflow, SQL Logs, Job logs but we are unable to figure out the reason for this issue.
    Do we need to restart the dispatcher or is there any issue with cache memory? 
    Can anyone help here to resolve this High Priority issue?
    Thanks in advance!

    IDM Experts,
    Can I get response on this topic from the experts?
    Will restarting the dispatchers help in this situation? Is this related to housekeeping issue of dispatcher.
    Why are some roles from IDM are not getting assigned in SAP Backend system? Also it is getting rejected 1st and 2nd time and during 3rd time it is getting approved. Please advise
    Regards
    Malini Rao

  • Analysis Authorization - Assignment Issue

    Hi,
    Created a analysis auth: and assigned the same to one user. But the issue is that the assignment holds true for all the users. how can i make it assigned to one single user? Is this suppose to work this way or am i assuming things?
    Thanks,
    Sri

    Hi Sri,
    I doubt your issue.
    please search the forums first before posting questions. This avoids redundant effort and saves time and resources of your peers.
    There are many threads available if you search with the search criteria “Authorization”.
      Cheers
        SAP NetWeaver BI Organisation

  • SAP Netweaver Installation Issue on Windows 7

    Hi,
    I was trying to install Netweaver 7.3 (Java) in my windows 7 and when I was in step 30 of 33 (Java components deployment)
    I got the following error
    Error message is 'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.. SOLUTION: Check 'undefined' and '' for more information.).
    I have successfully created loopback adapter and able to ping the IP address of the adapter . But when SAP server is trying to connect to this adapter using port 50004 and Its getting the error message . I don't know how to assign the port number to this loop back adapter.
    I tried to use telnet but it failed . (telnet ram-PC 50004 )
    loopback adapter IP : 10.10.0.10
    Host name : ram-PC
    As I am new to SAP , Please let me know is there any file where I need to define host and port ? Do I need to update service.msc file from  windows\system32\drivers\etc\ ? If so, what would be the service name and port ?
    Steps taken to resolve this issue :
    updated windows host file with IP and host name (10.10.0.10 ram-PC)
    updated windows service file with host and port (ram-PC 50004) - This step might be wrong (Do I need to use hostname or service name ?)
    uninstalled Antivirus
    Turned off windows firewall
    Added loopback adapter IP address to Windows firewall inbound rules .
    None of the above steps resolved the error . Please help me on the above issue.any help would be appreciated .
    Thanks
    Ram

    Here is the detailed error message
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.handleConnectionIssue(SessionImpl.java:381)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.parseNamingException(SessionImpl.java:337)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:230)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:150)
         at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:27)
         at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:117)
         at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:180)
         at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
         at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
    Caused by: javax.naming.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:381)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
         at javax.naming.InitialContext.init(InitialContext.java:223)
         at javax.naming.InitialContext.<init>(InitialContext.java:197)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
         ... 6 more
    Caused by: com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004
         at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:64)
         at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:39)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:297)
         ... 11 more
    [ Error ]
    [ Error ] Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ BEGIN ]
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ END ]
    108
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    [ Info ] Destroy command:[getParams]
    ERROR      2012-02-29 13:27:56.797
               CJSlibModule::writeError_impl()
    CJS-30181  At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.
    ERROR      2012-02-29 13:27:56.844 [sixxcstepexecute.cpp:937]
    FCO-00011  The step deploySoftwareComponents with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|usage_enable|0|NW_DeployOptionalSoftware|ind|ind|ind|ind|deploy|0|deploySoftwareComponents was executed with status ERROR ( Last error reported by the step: At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.).
    INFO       2012-02-29 13:27:57.702 [synxcpath.cpp:814]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\__instana_tmp.xml.
    Edited by: ramkumarsm on Feb 29, 2012 7:37 PM

  • Lockbox - SAP document clearing issue

    Hello all,
    Me along with our functional consultant are trying to figure out a lockbox document clearing issue and hope you could through some suggestions in. We are using FLB2 to clear SAP documents by using different search rules for invoice numbers on FLB2. Right now we have 5 different kinds of search rules based on document number (BELNR) and reference document number (XBLNR). We are able to clear the documents successfully if we have either document or reference documnet numbers in our input file using one of these 5 search rules. But now we would like to clear the documents also based on document assignment number (ZUONR). We tried few assignment numbers in the input file with all 5 search rules but FLB2 is not clearing any SAP documents. We are not sure if we need to have a new search rule specific to clearing the documents based on assignment numbers or how to create more search rules. Could you please suggest us if you have any thoughts on this?
    Thanks,

    Change AVIP-SFELD as ZUONR (for assignment number) and then put actual value you received in lockbox file in field AVIP-ZUONR. That way, payment advice is created for this check with value in assigment field and program will look for matching value in AR in assignment field.
    Also usually if customer is not found based on MICR number or based on match found using Doc# or Ref#, system will update AVIK / AVIP-KONTO as "*", so you need to search for customer number also and update it here.
    Hope this helps.

  • Vendor and Account Assignment Issues

    Hi All,
    Iam Working  in ECS SRM 5.0,
    When We are trying to creat SC, we are getting following errors :
    1.Vendor 0000100029 not intended for purch. org. (Item Sourcing Strategy & Plan Consulting )
    SOS is automatically assiged to particular product ID thru Purchasing Contract (Purchasing Contract created locally).Vendor is assigned to the Purchasing Contract.Vendor is properly mapped to the respective Purchasing Organization as recored in the table BBPM_BUT_FRG0061.Purchasing Contract is also mapped to the same Purchasing Organization of Vendor.
    2.Account 50011 requires an assignment to a CO object (Item Sourcing Strategy & Plan Consulting )
      2.1 Error in account assignment for item 1 
    Account assignment Categories and G/L Acc. are properly maintained and activated in SRM for each Product Category. same values for G/L Acc. and Acc.Assignment Categories are maintained in R/3. In R/3 when we checked in the tables SKA1,SKB1 & SKAT all these entries are maintained properly.
    In our project Scenario we don't require CO Component only AP Component is Configured for our Business Requirement.
    Full points will be rewarded for the solution.
    ([email protected])

    Hi
    <u><b>Please go through this -></b></u>
    <i><u>Please implement following SAP OSS Notes -></u></i>
    <b>Note 1026168 - Vendor &1 not intended for purch. org. &2</b>
    [ This is caused due to a program error. The reason for this error is, purchasing organization and purchasing group are always assigned at header level and in this case SRM is passing the item guid to determine the backend purchasing organization and purchasing.group. The header guid should be passed instead. ]
    <b>Q 3: Why does the system issue message KI 235 - 'Account & requires an assignment to a CO object'?</b>
    <u><b>Answer -></b></u>
    <u>--> In SRM, you always have to post to a G/L account and to a CO object. Exceptions: Direct material scenario - account assignment occurs in the OLTP regardless of what was previously entered in SRM. For external requirements, the primary system is the OLTP from which the demand is issued and sent to SRM. In this case, account assignment changes are not allowed in SRM because this would lead to inconsistencies (in follow-on documents as well) when compared to the primary system.
    --> In /OBA5, you can suppress the message or define it as a warning message. Since only error messages are transferred to SRM (BBP_PD 047), the message then no longer is issued in SRM. Do not consult the FI/CO team when implementing the changes.</u>
    (<u><b>See related SAP Consulting Notes - Release-Independent</b></u>
    <b>Note 815849 - FAQ: Account assignment system response</b>)
    <u>Hope this will definitely help. Do let me know.</u>
    Regards
    - Atul

  • SAP user assigned with roles from HR-ORG incorrectly

    Hi All
    I have an issue where a SAP user appears to be receiving role assignments from some HR-ORG object erroneously.
    I have checked the user's HR positions and organisational assignments and they do not have any roles assigned.
    I also checked the job and no roles are assigned there as well.
    Where could these roles be coming from if they are not coming from the position or org unit?
    User currently has direct role assignments in SU01 except for 3 roles which appear as indirect assignments (HR assignments) in SU01.
    Is this is a bug and is there a note to fix it?
    Please could someone let me know why this is happening.
    Thanks
    Ran

    Hi Colleen.... Thanks for your email.
    Please see below screenshot, it is an Org assignment but single roles also belong to composite roles.
    PBS is not meant to be active and PFUD is scheduled as a daily job. CUA is not active here.
    User is assigned to a position and org unit but roles are not provisioned via the Org/position. So there is a 0105 mapping, I have checked those positions and org units but no roles are assigned there.
    Basis release 731 and level 0005, SP - SAPKB73105.

Maybe you are looking for

  • How do I install movies, tv shows and music on my Mom's Apple ID without having to wait 90 days?

    My Mom even has Family Sharing on and I still can't download movies or tv shows from her account or I'll have to wait 90 days and I'm not waiting. how do I bypass the 90 day thing? It's very frustrating for me and I just want to watch my movies, than

  • Oracle 10g R 10.2 for Linux x86-64 - /proc/sys/vm/disable_cap_mlock problem

    Hi All, During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is wh

  • Alternative account no. in FS00

    Hello Friends, Can u explain the concept of Alternative account no.and how it will be used or helpful in transactions?

  • Crystal Reports Number of copies

    Hi there We are using Crystal reports to do reporting work in our add ons. Does anyony know if number of copies can be set  internally in a crystal report itself? We want to make the number of copies depending on a formula/function build withing a cr

  • Call form using link with autoquery, BUG

    If one of the text fields passed to the form contains the character "&" the form autoquery will not work. The character "&" is probably used as prefix for parameters. Does anyone know a workaround other than telling the users not to use "&" in their