SAP Netweaver 7.01: RSPLAN problem
When i start RSPLAN, Start Modeler, my browser open wrong Link.
Where i can find the parameter for to resolve my problem?
Hi,
Check SAP note 919850 and section 2 of this note.
Thanks
Sunny
Similar Messages
-
SAP Netweaver 7.02 Installation PROBLEM HELP
Hi,
Have the sapservices in the windows service?
The name should follow SAP.
If so, are they started?
Cheers,
ClébioHi there,
I'm also in the process of installing NW 7.02. A few thoughts:
1. What problem warning messages do you get early in the installation process?
2. The German version could be a problem. I also tried at first to instal in Win 7 Pro 64-bit GER (ok it was running with JRE 1.6.x )and gave up. Now I've got a new HDD with a clean new Win 7 Pro SP1 64bit US-EN instal with JRE 1.5_22 and everything is going very smoothly this time.
If everything fails with your Win XP instal and you don't have access to full Windows versions in English you could try downloading an evaluation version of Windows 2008 http://www.microsoft.com/download/en/details.aspx?id=8371
- if your system runs 64bit you can also use the newer 2008 R2 version. They are good for up to 180 days.
Good luck!
Disclaimer: I'm a total noob in SAP Netweaver
Edited by: simon.g on Aug 12, 2011 10:23 PM -
SAP Netweaver 7.02 installation problem, "Start Instance" not possible??
Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
MirsoHere is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 6896
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7620
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7828
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c 339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso -
SAP Netweaver 7.01: JSPM Problem
Hi,
I have this system:
SAP netweaver Abap+Java 7.01 SP3
I want to update the Java whit JSPM to sp 06, when i try it give me this error:
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop service for instance -1.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop service for instance SID_SapOsCol. See STOP_SERVICE_SapOsColnull_01 for details.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop OS services, SCS instance and J2EE instance.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop J2EE instance, SCS instance or OS services.
I have tried to make whit configtool in to SAFE mode...
But nothin... have any ideas?STOP_SERVICE_SAPOSCOLNULL_03.OUT:
failure: OpenService, NT ErrorMessage: Access is denied.
The problem are HERE, coz the warnig XML are not important i think, coz the same problem is here if i try deployment whit Single Package metod (select all the package). i stay to become crazy!
SDMLOG
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Info: Ending deployment prerequisites. All items are correct.
Jun 13, 2011 10:53:28... Info: -
Ending validation -
Jun 13, 2011 10:53:28... Info: Delete the files from D:\usr\sap\BJT\JC01\SDM\program\temp
Jun 13, 2011 10:53:28... Info: Close client connection to TSTSAPBIW01V/172.24.64.41, remote port 50699
Jun 13, 2011 10:54:23... Info: ====================================
Jun 13, 2011 10:54:23... Info: JControl is shutting SDM Server down
Jun 13, 2011 10:54:23... Info: ====================================
Jun 13, 2011 10:54:23... Info: Server finished sending back the answer of the ShutdownRequest.
Jun 13, 2011 10:54:23... Info: Shutting dispatcher down
Jun 13, 2011 11:02:54... Info:
Jun 13, 2011 11:02:54... Info: ============================================
Jun 13, 2011 11:02:54... Info: = Starting to execute command 'server' =
Jun 13, 2011 11:02:54... Info: ============================================
Jun 13, 2011 11:02:54... Info: Starting SDM - Software Deployment Manager...
Jun 13, 2011 11:02:55... Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
Jun 13, 2011 11:02:56... Info: SDM operation mode successfully set to: Integrated
Jun 13, 2011 11:02:57... Info: JStartupFramework is requesting to start the SDM Server.
Jun 13, 2011 11:02:57... Info: Start the SDM Server integrated in the JStartupFramework.
Jun 13, 2011 11:02:57... Info: Initializing Network Manager (50117)
Jun 13, 2011 11:02:57... Info: Starting SDM Server listening on port 50118
Jun 13, 2011 11:02:57... Info: SDM started successfully.
Jun 13, 2011 11:04:55... Info: ====================================
Jun 13, 2011 11:04:55... Info: JControl is shutting SDM Server down
Jun 13, 2011 11:04:55... Info: ====================================
Jun 13, 2011 11:04:55... Info: Server finished sending back the answer of the ShutdownRequest.
Jun 13, 2011 11:04:55... Info: Shutting dispatcher down
SDMCL.log
un 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Info: Ending deployment prerequisites. All items are correct.
Jun 13, 2011 10:53:28... Info: -
Ending validation -
Edited by: davide lancellotti on Jun 13, 2011 12:06 PM -
SAP Netweaver trial version installation problem
Dear friends
I tried to install SAP netwaever tial version on my labtop. I followed the instruction excatly as shown in the website www.sdn.sap.com. the first confusing thing I faced that during installation of MS loopback adapter I found that the network adapter I cfreated dose not contain (internet protocol TCP/IP instead I had internet protocol version 4 TCP/IPv4. however I used it and do IP address as specified. then I continue installation and when I finished I didnt find the following in my start up menu Programs u2013> SAP NW 7.01 ABAP Trial Version u2013> NSP. only a SAP Management Console was installed. Now I tried to uninstall SAP netweaver from my system in order to reinstall again, but I couldn't uninstall completely and each time I tried to reinstall the system keep give me waring massage that SAP already installed. even I used the registery clean tool but still facing the problem.
Please help me to completely uninstall all the SAP component from my system in order to installed it again.
Thanks in advance
Edited by: rizik_Hilan on Nov 6, 2010 8:24 PMDear Faisal
Thanks for your reply I will use the links yo sent to me in yor reply bt first of all I should uninstall all SAP component from my system. each time I run setup from image folder I always get the following massage " the Wizard has detected an already SAP system NSP on this host. Uninstall first." I need a way to remove the remaining SAP . I uninstall every folder I saw in my harddrive related to SAP and also I used registry clean tool bt still I face the problem
For yor help my friends -
SAP Netweaver Developer Studio Updatesite problem
Hi,
I have installed SAP Netweaver Developer Studio CE 7.1 SP09 in my desktop. I am trying to connect to local update site.
I am getting the below mentioned error.
Network connection problems encountered during search.
Unable to access "http://<host_name>:<port>/updatesite".
Error parsing site stream. [The XML stream is not a valid default "site.xml" file. The root tag is not site.]
The XML stream is not a valid default "site.xml" file. The root tag is not site.
Error parsing site stream. [The XML stream is not a valid default "site.xml" file. The root tag is not site.]
The XML stream is not a valid default "site.xml" file. The root tag is not site.
I have updated the com.sap.ide.update.autostart.prefs file with the local update site. Also I have provided the proper network connection details in windows -> Preferences -> Network Connections.
Please let me know the solution for this.
Regards,
Kalainila BHello Kalainila
Are you able to access;
https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710
what error are you recieving?
Thanks
Kenny -
SAP Netweaver Developers Studio Installation Problems?
I am not having success installing the SAP Netweaver Dvelopers Studio.
The wizard asks me for the location of the SDK (SAP DEVELOPER KIT) and I enter exactly where it is. However, it keeps telling me that this is not a valid directory...Perhaps the files became corrupt during download?
Anybody had any experience with installing this product?Hi Tom,
to install NWDS you have to first install the java development kit.
You can download it from
http://java.sun.com/j2se/1.4.2/download.html
Hope this help
Francesco -
Trying to run inst file, it gives me the following error message when I specify the localhost.
<b>ERROR 2006-02-12 09:23:48
<html>The name of this host is <em>E58AEB3F9A6342E</em> which is more than 13 characters long.<p>This is not supported for SAP server installations (see SAP Note 611361).</html></b>
Please share your experiences or knowledge on this issue.
thanksWelcome to SDN.
Change your computer name to something less than 13 characters.
(mycomputer ->properties->computer name)
Regards
Raja -
SAP NetWeaver Portal Crystal Reports PDF Export Problem
Hallo all,
We are working with BO Edge XI 3.1 with integration on SAP Netweaver Portal. The problem is that integrated in SAP Portal CR reports cannot be exported to PDF or printed out.
I am using an URL iview with the parameter sOutputFormat=P to run the report.
When I want to print out the report I get the warning message from Internet Explorer "The download of files from this page is for security reasons blocked. Click here..." --> Download the file. By clicking on the u201CDownload this fileu201D the report starts to run again. PDF export doesnu2019t happen.
Did somebody have the same problem?
Thanks a lot in advance!Hello Ingo,
thanks a lot for Your help. I have already talked to my IT department and they are looking for the solution of this problem, too.
Is there a documentation about necessary settings in the browser to work with SAP NetWeaver Portal and Crystal reports?
The problem is that on some clients the PDF export is working and on another clients not. The settings of IE seem to be equal.
Regards,
Katharina -
SAP NetWeaver 2004s Java Trial Version installation problem
I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR . -
Problem in Installation of SAP Netweaver CE 7.1 SP3
Hi,
I am trying to install SAP Netweaver CE 7.1 SP3 on Windows XP Professional. All the steps are executed sucessfully till Step 26 where it gives an error when it tries to
"Creating SAP start service of instance CE1 SCS01"
It says that the "Service didn't come up in 40 seconds" and if you retry the installation is terminated in 1 min with the error :
Selfextractor error
iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.2620.1195815840
In the SAP MMC only one server can be seen with the processes;
msg_server.exe
enserver.exe
gwrd.exe
All these processes are running in green.
Please reply ASAP.
The last part of the sapinstdev_log is :
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1
\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </p> </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from guiHi All,
I faced the same problem on WinXP Pro SP2, SP3 and on Win2k3Server although all the installation requirements are fulfilled. I have the same problem with SP5 downloaded from SDN which was released recently.
I could install successfully SP1(Trial Version) from a DVD that came with the book "Developer's Guide to SAP NetWeaver Composite Environment". This was packaged using "Install Anywhere".
So, I think it is a problem with SAPInst. Could anyone help to solve this problem?
Your suggestion is highly appreciated.
Thanks & Regards - Tarini P Mohanty -
Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1
Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
SunnyHi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang -
Install SAP NetWeaver ABAP Trial 7.02 Win 64-bit problems :(
Hello Community,
since 4 Days i try to install this Version of SAP NetWeaver ABAP Trial 7.02 Win 64 Version SP 6,
but it fails every time, i'm at end of my power now , is there any one who can help me with this?
Or gibe me a direkt link to download the current Verson of NetWeaver Trial to learn more about ABAP probramming?
Most problems are with the Database, and MaxDB.
Here is a snippet of Errortext:
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Error during execution of command identifier 'DB_CREATE' : com.sap.sdb.sllib.api.exceptions.ToolException: Error during command: C:\sapdb\programs\pgm\dbmcli.exe -R "C:\sapdb\NSP\db" db_create NSP *,* ERR -24953,ERR_DBEXIST: Database instance NSP already exists). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
Thanks for any help
MirsoHi Senthil,
thanks to you for answer, you mean stop the "serv.exe->MaxDB - Communication server"
that is in Taskmanager visible?
To day i try again to install, and comes to step with creating Database instanz, better as before.
regards
Mirso -
Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara -
Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp
Hi
when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
Any inputs are welcomeHello Bala,
Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
Regards,
Vishwas.
Maybe you are looking for
-
Architecture for writing XML information to Oracle DB
Hi, I wish to design a java application that reads in an XML string from an Oracle database, parses this string and based on the tag values, inserts data from this XML doc to three Oracle temporary tables. I have the flexibility to either store the X
-
Hi, Got an intermittent problem with SBS2008 shares being accessed from Mac 10.6.3 workstations. A lot of the time everything is ok but occasionally (with no real pattern) it will take upwards of 30 seconds to open a folder up and my clients are gett
-
I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes
-
Waterfall graph in obiee 11.5
Hi, We are looking to implement waterfall graph in obiee 11.5 , it looks like it is included in 11.6 (though not supported by oracle), any workaround to implement it in 11.1.1.5 ? Regards
-
Separate Server for OBIEE 11G Presentation Server
In version 10 of OBIEE many people put the Presentation Server and the OBIEE Application Server on separate servers. Is this architecture possible in OBIEE 11G using the new Fusion framework?