SAP process steps for tool room

What will be the SAP process steps for tool room.
Moulds are manufactured and maintenance of moulds are being done in the tool room

Hi,
Assuming the moulds are available, you may follow the steps below:
> Create mould as Equipment with PRT screen data
> Create measuring point for this equipment.
> Create counter based maintenance plans for preventive maintenance.
> Use applicable user exit to update the measuring point, in association with PP product confirmation, where this mould is used in respective work center.
> This will give the preventive maintenance schedule in accordance with usage.
> For unplanned repairs, use notification/Maintenance order route to calculate the costs and to maintain history.
> When life expires, deactivate and set 'deletion' flag' to the respective mould equipment master, so that it can not be used in production.
> Detailed scenario should be mapped, based on the actual customer requirement.
James Prabaharan

Similar Messages

Process steps for customer incoming payment w.r.to Billing.

Hi all,
Can some body help me in by providing the process steps for customer incoming payment w.r.to Billing.i want to know the process from open items to cleared item , if possible pl give table names also and thier data flow using tables.
thanks

Dear Sai,
Use the transaction code F-28.Give the document date, Bank account, amount received, Value date, and the customer code. In case you know which are the document numbers against which you have received the payment, select the "Document numbers" in the "Additional selection" tab and then click on "Process open items".
Fill the document numbers in the next field, press enter and then click on "Process open items". Select the open items, simulate and then save.
In case you do not have the document numbers, then directly click "Process open items", select the line items and click "Document > Simulate" and then save.
Assign points if useful.
Regards
Venkatesh

SAP processes available for use in the process analysis tool Adonis?

Hi everybody,
I'm currently working in a project where we design a process for process documentation for a globally acting company.
Mainly there are SAP and non-SAP based processes.
For the SAP processes there doesn't exist any process diagrams just some functional specifications how the SAP system is working.
All documentation will be designed with Adonis, a business process analysis tool by BOC (Link: http://www.boc-group.com/).
Does anybody know, whether there are business process documentations available by SAP as diagrams e.g. the order flow process so that I can import the business process into Adonis to make it available as a process diagram? As far as I know Adonis can import BPMN, UML, XML files.
Any help or hint is appreciated.
Thanks in advance and best regards,
Frank

Hi Dan,
no this is not possible. The Solution Documentation Assistant allows the analysis of how often certain transaction, reports etc. are executed in a certain time frame. But this is not split-up per organizational unit like company code or plant.
You should contact your SAP Support Advisor and ask for a Continuous Quality Check service offering "Business Process Analysis & Monitoring" as part of SAP's Enterprise Support. This service comprises two remote days . One day analyzing your ERP processes like Order to Cash, Procure to Pay, Manufacturing, Plant Maintenance and Warehouse Management. There you can learn something about used document types and plants, sales orgs or shipping points. The second service day is used to setup an Business Process Monitoring (BPMon) example in your SAP Solution Manager.
You can learn more about BPMon either in several SDN blogs (best starting point /people/volker.vongloeden/blog/2009/07/23/functional-scope-of-business-process-monitoring-in-sap-solution-manager) or on the SAP Service Marketplace https://service.sap.com/bpm.
Best Regards
Volker

Process step for Investment Management

Hi SAP Gurus
Our client is into BOT projects - Build, operate adn transfer projects.
Till the time of transfer the asset is the property of our client. So the client builds an assets, maintains & operates and transfers the rights only after certain years.
For this I am suggesting using Investment Management module but I am not very clear on the process steps right from creation to Investment order for project - build & for operation.
Request you to suggest me the process steps.
Thanks,
Srikanth

Hi,
For more information about Investment Management, click the below link.
http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f273493111d182b70000e829fbfe/frameset.htm
regards,
Venkatesan Anandan

R12 Process Step for Windows XP

Hi,
I am planning to install R12 in my laptop on XP Professional SP-2 operating system, it will be great if anyone has process step can you please share,

Check the following thread, it may be helpful:
Oracle E-Business Suite R12 Installation Steps on Windows XP
Oracle E-Business Suite R12 Installation Steps on Windows XP

CFolders - actual process steps for storing, sharing and authorizing

I am PP consultant and know nothing about cFolders and even i don't have access to cFolders server as well.
I am in one project, where i need to assess the cFolders functionalities, how client can utilize that tool as per client requirement.
Requesting your help in finding some of the information as given below.
1. Process followed to store and share engineering data such as CAD drawings (2D & 3D) from SAP PLM/DMS in cFolders (Need step by step screen shots)
2. Process followed to store and share non - engineering data such as requirements docs from SAP ERP/DMS in cFolders (Need step by step screen shots)
3. Providing access to suppliers (If we provide access to one user, can we define that it will expire after some period of time. I mean, authorization is provided from date - To date basis)
4. If you have any real time case study on Collboration with suppliers using cFolders
5. What will be the process for point 1 & 2 , if we use other PLM software (not SAP PLM) and utilize cFolder colloboration. What are the integration points to be considered in this case?
SAP version ECC 6.0
Cprojects 4.5
I need your help to keep my job alive in this market condition. I hope, you understand my situation . Please send docs to the specified id in profile.
Thanks a lot .
Satish

Hi,
I have few points for you.
Requesting your help in finding some of the information as given below.
1. Process followed to store and share engineering data such as CAD drawings (2D & 3D) from SAP PLM/DMS in cFolders (Need step by step screen shots)
I think you must be clear on what do you want to do?
SAP PLM/DMS use itself to store and share information with large users of the system by managing changes effectively. So no doubt about this functionality. According to user authentication the access is given to the user of the system either for PLM/DMS. Whether he is a supplier or customer.
2. Process followed to store and share non - engineering data such as requirements docs from SAP ERP/DMS in cFolders (Need step by step screen shots)
The above answer is applicable for this point also.
3. Providing access to suppliers (If we provide access to one user, can we define that it will expire after some period of time. I mean, authorization is provided from date - To date basis)
This is possible for all the users. Apart from that you can control acess for each document also.
4. If you have any real time case study on Collboration with suppliers using cFolders
Collaboration is the term used by all the industies like Automobile, Aerospace, Heavy engineering and many more. You can get examples from these industries. But i have not worked in this scenario. The reason being many OEM's in INDIA are not willing to share their data with Tier I suppliers.
5. What will be the process for point 1 & 2 , if we use other PLM software (not SAP PLM) and utilize cFolder colloboration. What are the integration points to be considered in this case?
This you have to study the requirements properly and take a decision ont he same according to the clients requirement.
Let me know if you are looking for more info
Regards
Suresh. J

Business process step for BW

Dear friends,
I wants to generate business blueprint for BW implementation through sol Man 4.0. In t.code SOLAR01,i want to maintain structure under Business process level.
But could not find any suitable process related to BW.
I am getting only processes like Product dev & introduction, sales, procurement,production etc...from BPR. But i am NOT getting business processes for BW related from BPR.
How to select standard Business processes for BW from BPR?
Plz guide me
Thanks
Senthil

Hi Kathir,
We are having two kind of CD in best practice.
1. Documentation CD
2.Configuration CD
Configuration CD is the one, it contains building blocks. This CD will be used to upload the best practices into solution manager. so that it will appear as template in scope.
But for BW, i can not find config CD. means we can not upload best practice in to sol man. Is it so?
Thanks
Senthil

Process steps for Capital goods transfer from one exciseable plant to another exciseable plant

Please guide me about below mention process :
Capital goods transfer from one exciseable plant to another exciseable plant with updation of RG23C register.
Goods purchase in prev month.

Company code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same. Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code). Then in receiving company code based on the delivery document of other company code GR can be made. and IV.

Steps for Variant Configuration

Hi Gurus,
Can any body tell me step by step procedure for variant configuration.
My e-mail id. <REMOVED>
Regds.......
Sumit

Hi Sumit,
Variant configuration is for manufacturing complex products. The manufacturer always has to offer new variants of its products. Often, new variants are created by modifying existing product designs as you process the order. The important thing is to react quickly to customers' requirements.
The customer determines the features of the product. A customer buying a car, for example, can choose the features of the car and combine these features as required.
The product configurator improves information exchange between sales, engineering, and production. Variant configuration helps the customer or salesperson to put together specifications for the product and ensure that the product can be produced from these specifications. It also ensures that production costs do not overstep the mark.
Procedure -
Create a Material - KMAT type with Item category (002)
Create Characteristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
Assign these two characteristics to a Class in CL01 - ZBikeclass (Type 300) in characteristics tab page.
Then go to CU41 Configuration profile select the material and enter the description click on the class assignment i.e. assign Zbikclass.
Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now go to VK11 - Enter VA00 (Condition) (For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.
Variant configuration is for manufacturing complex products. The manufacturer is
always having to offer new variants of its products. Often, new variants are created
by modifying existing product designs as you process the order. The important thing
is to react quickly to customers' requirements.
The customer determines the features of the product. A customer buying a car, for
example, can choose the features of the car and combine these features as required.
The product configurator improves information exchange between sales, engineering,
and production. Variant configuration helps the customer or salesperson to put
together specifications for the product and ensure that the product can be produced
from these specifications. It also ensures that production costs do not overstep the
mark.
Integration
Variant configuration is integrated in the following applications:
a.. CA Classification
b.. LO Material Master
c.. PP Bill of Material
d.. PP Routings
e.. PP-PI Master Recipes
f.. SD Sales
g.. SD Conditions
h.. MM Purchasing
i.. CO Costing
j.. PP Material Requirements Planning (MRP)
k.. PP Production Orders
You can configure the following objects:
a.. Materials
b.. Standard networks in the Project System.
c.. PM General maintenance task lists
d.. Model service specifications
Features
You do not need to create a separate material for each variant of a product in your
company. You can use one configurable material to cover all variants. You create a
super BOM and a super routing for this material, containing all the components and
operations for producing all variants of the product.
To define the features of a configurable material, you use characteristics. To
enable you to use characteristics to configure a material, you assign the material
to a class of class type 300. Possible characteristics of a car, for example, are
model, country, color, and engine. The customer can choose from among different
options for each characteristic (values).
The only limitations are combinations of features that are not possible for either
technical or marketing reasons. You cannot combine all types of car engine with all
types of transmission, for example, or certain types of upholstery are only
available for more expensive models. In Variant Configuration, you use dependencies
to control this. This prevents combinations of options that are not allowed.
Dependencies also select exactly the right BOM components and operations to produce
a variant.
Each configurable object must have a configuration profile. The configuration
profile for a material controls the configuration process in the sales order.
You can make the price of a variant dependent on the characteristic values assigned
(Pricing). You can use variant conditions to define surcharges and discounts for a
variant.
For variants that are required frequently, you can create material variants, which
can be produced without a sales order and kept in stock. When you receive a sales
order, you can check whether the variant required is in stock, so that you can
deliver immediately.
Pl go thr below links:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
http://sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Steps for Varient Configuration

All SAP Gurus,
We want to do varient configuration for few material codes.
Varient will be only one (eg: colour).
What are the steps involved in varient configuration?
Regards,

Hi,
Variant configuration is use for the material with different properties like CARS
material is same but only due to the color the selling price will differ
likewise to keep single material with diff characteristics Variant configuration will be used
http://help.sap.com/saphelp_erp2005/helpdata/en/d8/fa9bd49ede11d1903b0000e8a49aad/content.htm
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
http://www.adelante.fr/IMG/pdf/VC101_a_beginner_s_guide_to_variant_configuration.pdf
http://www.pesoa.de/pages/Publications/Fachberichte022004/PESOA_TR_6-2004%20Variant%20Configuration%20of%20Software%20Systems.pdf
http://www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm

Process step with waiting time

Hi all together,
in BW 3.X you could set a waiting time for a process step, for example 300 seconds. So the following step would start after a waiting time of 300 seconds. This was often used by us for an automatical second execution of the same process after a waiting time.
Now I want to implement the same amendment in BW 7.0 for the process deleting of overlapping infocube requests. But in the context menu the "waiting time" entry is not available. Is this missing menu entry depending on specific settings? Is it generally not available in BW 7.0?
If it is not available, how can I implement a second execution of the process step after a waiting time of x seconds?
Thank you very much in advance for your answer.
Annette

Hello,
technically 'waiting time' and debug loop are the same. In ancient support packages of 3.x using the waiting time could cause lock situations, but this has been fixed years ago.
Technicall there is nothing wrong with using this function, however, from a logical point of view there are usually better alternatives (like interrupt). In most cases the wait time (or debug loop) is used to ensure that a process only starts after another one has finished. But in this case you either have to wait very long or you have the risk that the wait time is too short. And if you really need to wait, you can use an ABAP process with 'wait up to ... seconds'. This is in my opinion more obvious if a not so experienced person has to monitor the system.
Best regards,
Ralf

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

Connection steps for SAP BW and R/3

Hi Every Body,
Can you please explain me detail about the connectivity between R/3 and BW.
General steps which am aware is as follws;-
SAP R/3 steps to be performed
1. Define Logical system---->(e.g ABC100)
2. Assign client to logical system -->(100)
3. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
SAP BW Steps:-
4. Define Logical system---->(e.g ABC100)
5. Assign client to logical system -->(100)
6. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
Then in BW Environment in RSA1->Source Systems->right click and choose Create
There are two options available for R/3 system one is Manual and one is Automatic.
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
Is there any other steps am missing.What about the inbound and outbound Idoc Parameters.
I feel this will help while transferring data to BW.am I right.
Please clearly explain the steps for R/3 and BW connectivity.
Regards,
VJ

Hi,
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
RFC Destination should be R/3 system. NOT BW system.
should i make connection with only R/3 200(Data Client) to BW
Yes you have to connect to 200 only. Not to 100.Other wise you will not get data from R/3 to BW.
What is the Use of Transport Button in RSA6.Post Processing data sources.
It will be used to create Trasnport requests on DS .
Suppose if i activate data source from Customizing client(100)and click on Transport button in RSA6 if there is connection with this client to BW. What is the Impact.
It will not give any impact on BW. Actually it ask you to create a Transport requset by Prompting the message box. After click on create button and entering the description, it will create a transport request.
Clearly explain me in detail what happen when i choose Transport Button in RSA6 for BC data sources.
It is must and should process. Because you will not activate(using of RSA5) the DS in quality R/3 system. So to use this DS in QA system, you will import the Transport request creatd in DEV r/3.
In your case, you will use client 100 for activating the DS and creating Transport reuests. And then these DS are automatically available in client 200, because DS are Client independent.
With rgds,
Anil Kumar Sharma .P

2 Logical Components for 1 Business Process Step

Hello All,
I'm looking for a way to assign in SolMan --> transaction Solar01 - Tab Structure - Business Process Step, 2 logical components for 1 business step. When creating the business step I have to assign 1 specific logical component to this step. Once I have done this I can only select the chosen logical component ffor SAP Transactions, configuration object etc.. As my business step is running on 2 different systems I need to find a way to link transactions etc. in the step to the different systems. Is there any way to change this for the Level 3 elements, like it is for level 2 (business processes) where I can choose in the different tabs between all the logical components?
Thanks in advance
Ramó

I've seen people use some absolute craziness to get more than three levels. The most extreme being using multiple projects at the highest level (i.e. a project for PTP Accounts Payable). Don't go there.
I personally like to have 1 transaction per process step. Don't use the transaction tab as another process level, use it to better describe the process step (like all the other tabs are uses). It results in a better understanding of the system as you go forward. To do that I make teams break up things they think are one step (this can take some arm twisting, so hit the gym and maybe take a few judo classes).
This allows you to use SolMan in more powerful ways. For instance, if you attach development objects to a step with 5 transactions, you cannot tell which transaction is modified by the development object. However, one transaction per node provides you this link. There are other examples, but basically the "where used" button becomes very useful when you have 1 transaction per node.
Maybe you could provide a specific example of your process and we can think of a better way to collapse it.
Such as:
- PTP Non-Merchandise Purchasing
-- Expense Purchasing
--- Create Purchase Requisition
--- Create Purchase Order (Assign Vendor & Price)
--- Send to Vendor
--- Post Goods Receipt
--- Perform LIV
--- Process Payment
Some companies have 6 level processes already defined in models and putting it into SolMan can be a pain for sure. Your naming convention is usually the best route.
regards,
Jason
The system role and template work around doesn't apply to your situation.

Self Check and Your self check printing process steps and program in SAP

Hi SAP-FICO's
My client required in SAP-ECC-6.0
1.Self Check printing for cash withdrawel
2. your self check for one Vendor or group of vendors for getting DD from the Bank
3.How to issue the same check for more than one vendor and get debited through F-53 bank payment
Can any one give idea and process steps to resolve the above three issues .
Thanks in advance.
Thanks &regards
maalik

Hi
Can any one can provide the process steps.

SAP process steps for tool room

Similar Messages

Maybe you are looking for