SAP PS Report Error
hi, expert:
now the user use cn25 to confirm the activity. for example
Activty A: actual start : 0209-06-02 actual end: 0209-06-30
now the user find this error. then cancel the document.
After cancel. when use T-Code "CN41" to view the report. there is ABAP down.
but the other T-codes "CN43N","CN46N", "CN47N", "CN48N", the report can execute correctly.
how to solve this error.
thanx!
thanks for all.
the error message is as below:
Error analysis
A RAISE statement in the program "SAPLCXOT" raised the exception
condition "PARAMETERS_NOT_VALID".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
RAISE_EXCEPTION " "
SAPLCXOT or "LCXOTF10"
SCHED_WITHOUT_OP_TIME
or
SAPLCXOT "PARAMETERS_NOT_VALID"
or
RCNSO000 "PARAMETERS_NOT_VALID"
Similar Messages
-
Error when print out SAP Crystal Report in SAP B1
Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom. -
Windows 8.1 is throws error when displaying SAP Crystal Reports 10.5
Hi there,
On windows 8.1 – 64 bit SAP Crystal Reports fails to work (even empty report):
“Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version 10.5.3700.0, culture=neutral, PublicKeyToken=blahblah' or one of its dependencies. The system cannot find the file specified.”
Project that run SAP Crystal Report was compiled as 64 bit & 86 bit & ANY CPU, but all displayed the same error message. Is windows 8.1 64 bit missing any *.dlls? Or is there compatible CRRuntime engine with windows 8.1 64 bit?
I had this problem before on windows 7 but by changing solution Platform and Target CPU – solved the problem, however windows 8.1 seems to have a bug!
More Info about app:
VisualStudio2010
SAP BusinessObjects XI 4.0
Support Pack (several been tried): crruntime_64bit_13_0_7.msiPost Author: JonathanP
CA Forum: .NET
Are you simply viewing the report, or exporting it?
The error doesn't tell us much. A windows application should not need any special permissions. Try giving the user full rights to the temp directory, as the report engine does need to write seme files there. -
500 SAP Internal Server Error, in WD report while launching SC in SRM 7.01
Dear SAP WD Gurus,
We have recently upgraded the SRM 7.0 to EHP1 after that we are getting ths below
We have created Z WD application genarating report in SRM 7.0, we have provided a hytep link in row to display shopping cart in the report. on click of display we are getting error as below on Browser (Portal)
500 SAP Internal Server Error
ERROR: WebDynpro Exception: URLhttp// XXXXXX may contain fatal script (termination: RABAX_STATE)
where the URL is properly working fine if we run through browser.
and even getting dump as below
What happened?
The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CX_WD_GENERAL=================CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception: URL
http://isvsapeadev.ad.infosys.com:50200/irj/portal/infysrm?navigationtarget=rol
ES%3A%2F%2Fportal_content%2Fcom.infy.nonsparsh%2Fcom.infy.srm%2Froles%2Fcom.inf
y.requisitioning_urp_general%2Ffl_navi%2Fcom.sap.pct.srm.core.iv_shoppro
Please help in resolving this
Thanks in advance
Vinod
Edited by: Vinod Malagi on Jan 11, 2012 11:27 AMHi Vindo,
FYI this is the wrong forum. Even though the problem started taking place after an UPG/EHP, this is still a matter for the Portal team, not the ugprade one
Anyhow I'll try to help you. This dump is mostly seen when you call the webdynpro from a non-supported browser. Please check PAM (http://service.sap.com/PAM) for the supported ones.
Are you using a SM59 call to the WD? You can not connect to a Webdynpro
application via SM59 as SM59 is not a supported. You can only use the browser visible in the PAM to access WD. /* e.G. IE 6.0, IE 7.0, Firefox */
I hope this helps
Best regards,
Tomas Black -
Hello,
I just tried to install the new file CRforVS_13_0_9.exe on a Windows 7 Ultimate machine.
I have Visual Studio 2013 and wanted Crystal Reports to be fully integrated with it.
By the way, I had already uninstalled CRforVS_13_0_8.exe before I attempted the installation of CRforVS_13_0_9.exe.
However, the installation failed with the following error message...
"The installation failed prematurely." The error dialog box with a full error message is attached.
It may be significant to note that even after what looks like a failed installation, that "SAP Crystal Reports, version for Microsoft Visual Studio" (ver. 13.0.9.1312) does show up in the Programs and Features Control Panel).
Any help/advice would be greatly appreciated. Please advise.
Tom DaveyThis used to be quite common on WIN XP and Vista and it was an MS issue. Googling I found the following that may help:
Fast and easy Windows Error Code 2753 resolution
Error 2753 Preventing Uninstall/Reinstall - Microsoft Community
Windows Installer Error Messages (Windows)
For now, this is the only report of the error with SP 9, so it will be good to check if the above helps.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
SAP Crystal Reports 2011: Error INS00140 The Product keycode is not valid
I have followed all of the instructions in the previous thread but am still getting the error message. I am trying to install on a Windows 7 machine.
Try this Post...
SAP Crystal Reports 2011: Error INS00140 and other install errors
PS - Coy no longer works here
Don -
"The event log file is full" error - SAP LVS Report Viewer 1.0
Hi Experts,
I'm getting an error when trying to generate a report in SAP LVS.
Error:
The event log file is full
How do I resolve this? Anyone encountered this error?
Thanks in advance,
CyrousHi,
It seems that the audit log mechanism is activated, at your system. But, if you didn't set the parameter DIR_AUDIT, audit log will be created under "/usr/sap/<SID>/<instance>/log", not "data" folder. You can check its default value on RZ11. Revise the parameters, below;
DIR_AUDIT = <path>
FN_AUDIT = audit_++++++++.AUD
rsau/enable = 1
rsau/max_diskspace/local = <SizeOfFile>
Best regards,
Orkun Gedik -
Database Connector Error when I connect SAP Crystal Report to dbase
When I connect SAP Crystal Report to dbase the error is "Database Connector Error", only when exist a field the type memo. I need to used this type of field, somebody that known how can I resolve this problem or some idea?
Thanks a lot for your help.Hi,
there are sevaral SAP Notes for your problem. Can you specify the databaseof the source?
i.e. MS SQL Server -> Note 1212769
dbase -> Note 1209347
regards
-Phil -
SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters
Hi,
I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
and on the ECC side we had to develop Crystal Authorization - how to develop this?
Can someone screenshot of these steps and please suggest if something else can be done.Hi Pawan,
Search for the error and you should see many threads for this issue.
Anyway, this is what I found:
logon failed. you do not have the necessary rights to design reports
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
The wiki should have answers to all your questions regarding Transports, Authorization et al.
-Abhilash -
Sap crystal report for visual studio print error
vs.net 2012 crystal report paper size 8.5in x 5.5in orientation portrait will not print properly. Always it prints landscape
Don't define the paper size in the CR designer. Define it in the printer driver. Also, make sure you are using SP 10:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Issue with SAP BW Report Iview
Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR -
Creating SAP BW Report iview in Portal to access BW System
Hello Everybody ,
Iam creating an iview for publishin BW Reports in Enterprise Portal with the iview name SAP BW Report iview ,it asks for <b>BEx Web Application Query String</b> and <b>Application Parameters</b> and we are stuck over that.Do we need to create some standard templates for it and then connect them to reports .What should we enter under these parameters.Kindly revert back.
When we launch the SAPBWWebAppDesigner for template designing,an error message is displayed as mentioned below.Kindly please check that and the reason for its display.Do we need to make certain configurations for the Webapplication server for BW ,if any one has a document /guide available for that,kindly please revert back.
Error:
"You are logged on to an application server that does not support HTTP.Some of the Web Application Designer functions are therefore not available.Do you want to logon to a different application server?"
We are also not able to connect to the Web Application Server of BW directly by putting the url of the WAS into our browser.Are any extra configurations needed for that on the BW side for WEBAS.
You can send me attachents on my Email id which is [email protected] back soon,
Thanks,
SomyaHello,
I was asking abt the following parameters to be entered in BW for Portal inorder to create RFC ,Rfc for BW in Portal is already created.
Program ID
PortalDirectory
RFCDestination URL Prefix for Portal
Prefix of RM for BWMetadata
Export Path
Export File Name
Path in Portal
Name in Portal Content
System Alias
Logon Ticket Client
Portal SID
Import Path
Import File Name -
Hi,
Im trying to create a SAP BW Report iView with a BEx URL, but Im getting an error:
<i>Session Management will not work! Please check the DSM log file for details.</i>
When I use the wizard (for SAP BW Report iView), it asks me to fill out the web application string. Here I pasted in the URL. I left the application parameters blank.
The BEx URL:
http://<hostname>/sap/bw/BEx?sap-language=DA&bsplanguage=DA&CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
The BW call works fine in the browser and with a URL iView!?
EP 6.0 / WAS 6.40 / BW 3.5
Thanks
Joachimyou should be using BW Report iView.
and when you create BW Report iView pass the following for the querystring parameter
CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
for this to work, in the system definition WAS host , was path and was protocol should be maintained
Regards
Raja -
Crystal report error on Target Machine
We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u201CCRforVS_redist_install_64bit_13_0_1u201C run time utility is installed. But it gives a crystal report error on the target machine.
Our development and target machines have Win 7 Professional, 64-bit OS installed.
Kindly provide us with an appropriate run time version for target machine in order to fire reports or any other solution in order to make our project work on target machine.
Thanks!Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir -
Crystal Report Error with VB Studio.
Getting the following errors when Publishing my Project
Error 2 The install location for prerequisites has not been set to 'component vendor's web site' and the file 'Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi' in item 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' can not be located on disk. See Help for more information. c:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets 3939 9 HellerMain
and
Error 3 The install location for prerequisites has not been set to 'component vendor's web site' and the file 'Crystal Reports for .NET Framework 4.0\CRRuntime_64bit_13_0.msi' in item 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' can not be located on disk. See Help for more information. c:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets 3939 9 HellerMain
I have a work around I copy the MSI to each machine however I want to include in the publishing of the program
Any Help?
JimThanks Ludek,
Thanks I did that and now I get the following:
Warning 1 The value of the 'PublicKey' attribute in 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' does not match that of file 'C:\Program Files\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi'. c:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets 3939 9 HellerMain
and
Warning 2 The value of the 'PublicKey' attribute in 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' does not match that of file 'C:\Program Files\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\Crystal Reports for .NET Framework 4.0\CRRuntime_64bit_13_0.msi'. c:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets 3939 9 HellerMain
any suggetsions?
Jim
Maybe you are looking for
-
Cash Flows For Investment Order
Hello Is it Possible to generate cash flows for Investment Order Regards
-
New Sneak Preview Downloads?
Hi, Today i navigated to the SDN Downloads page and noticed that the Sneak Preview Full Edition is now available in two parts. Earlier the downloads were available in four parts. I have already installed the Sneak Preview which was available as four
-
Entering data into Reports-WebDB2.2
Hi, I am trying to enter html into the add text section ("Help Text")of the report. However, the information that i am entering is defaulting to the centre when it is being displayed. i have tried adding html tags <Align> to align the data to the lef
-
Hi, I can not seem to get the AD connector to run. I have no errors in the Operations Manager log or for Data Connectors. I am not sure what else I can check. When I click synchronize now for any of the AD connectors, nothing happens. Could there be
-
Trying to install pandora on my touch but it insists that I install iOS 5 or newer. I think I just need to get iOS5 from iTunes but I can't seem to find it.