SAP PS Text - Reporting

Hi All,
I would need your expertise on the following point:
Is there a standard transaction in SAP PS which would list all the projects which do have a PS text attached? We do not necessary need to read the PS texts in the report but just to see the projects which have a PS text attached.
Many thnaks for your support
Sabrina Fruteau

Thanks for your reply.
CN05 and 04 are helpful if i first provide a project number. What we need would be to have it on multiple projects. Is there to do that?
Thanks!

Similar Messages

  • Nodes statement in payroll in SAP ABAP hr  Report

    hi,
      i am working in sap abap hr report for payroll.i am using nodes statement in that report.it is showing error that ""PERNR" is not a node of the logical database __S".how can i solve this error.in this report.          
    NODES pernr .
    INFOTYPES: 0000, 0001, 2001.
    TABLES: t554s, pcl1, pcl2.
    INCLUDE rpclst00.
    INCLUDE rpc2rx09.                      "Payroll results datadefns-Intl.
    INCLUDE rpc2rxx0.                      "Payroll results datadefns-Intl.
    INCLUDE rpc2rgg0.                      "Payroll results datadefns-GB
    INCLUDE rpcfdcg0.                      "Payroll results datadefns-GB
    INCLUDE rpcdatg0.
    INCLUDE rpc2cd00.                      "Cluster Directory defns.
    INCLUDE rpc2ps00.                      "Cluster: Generierte Schematas
    INCLUDE rpc2pt00.
    INCLUDE rpcfdc10.
    INCLUDE rpcfdc00.
    INCLUDE rpppxd00.
    INCLUDE rpppxd10.
    INCLUDE rpcfvp09.
    INCLUDE rpcfvpg0.
    INCLUDE rpppxm00.
    TYPES: BEGIN OF t_salrate,
        seqnr    TYPE pc261-seqnr,
        begda    TYPE p2001-begda,
        endda    TYPE p2001-endda,
        split(2) TYPE c,
        val      TYPE p DECIMALS 2,
       END OF t_salrate.
    DATA: it_salrate TYPE STANDARD TABLE OF t_salrate INITIAL SIZE 0,
          wa_salrate TYPE t_salrate.
    *Selection screen
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: so_awart FOR p2001-awart.
    SELECTION-SCREEN END OF BLOCK block1.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    GET pernr.
    get payroll results data
      rp-init-buffer.
      CLEAR rgdir. REFRESH rgdir.
      CLEAR rt. REFRESH rt.
      CLEAR: rx-key.
    set key to current pernr
      MOVE pernr-pernr(8) TO cd-key-pernr.
    retrieves payroll results for specific pernr(personnel number)
      rp-imp-c2-cd.
      IF rp-imp-cd-subrc = 0.                                "rgdir success
        rx-key-pernr = pernr-pernr.
        SORT rgdir BY seqnr ASCENDING.
        CLEAR rgdir.
      ENDIF.
      SORT rgdir BY fpbeg fpend ASCENDING seqnr DESCENDING.
    RGDIR the table where all payroll results periods are stored
      LOOP AT rgdir WHERE  abkrs IN pnpabkrs        "pay area
                      AND  srtza EQ 'A'
                      AND  void  NE 'V'.
        IF sy-subrc NE 0.
        set key to specific payroll results period(current RGDIR loop pass)
          UNPACK rgdir-seqnr   TO   rx-key-seqno.
        Retrieves data for specific payroll results period (current RGDIR
        loop pass)
          rp-imp-c2-rg.
        Loop at wpbp data for specific payroll results period
          LOOP AT wpbp.
            wa_salrate-seqnr = rgdir-seqnr.
            wa_salrate-begda = wpbp-begda.
            wa_salrate-endda = wpbp-endda.
            wa_salrate-split = wpbp-apznr.
          loop at rt data for specific payroll results period
            LOOP AT rt WHERE lgart EQ '/010' AND             "wage type
                             apznr EQ wpbp-apznr.            "payroll split
              wa_salrate-val = ( rt-betpe * ( wpbp-adivi / wpbp-kdivi ) ).
              APPEND wa_salrate TO it_salrate.
            ENDLOOP.
          ENDLOOP.
        Process BT table
          LOOP AT BT.
          ENDLOOP.
        Process NIPAY table
          LOOP AT NIPAY.
          ENDLOOP.
        etc................
        ENDIF.
      ENDLOOP.
    *END-OF-SELECTION.
    END-OF-SELECTION.

    Hi,
    Have you put a Logical Database in the attributes of the program that you have created ?
    Regards,
    Samson Rodrigues.

  • Sap Query Web Reporting - Issues with accents

    Hi,
    We was using Web Reporting for Sap Querys, throw this tool we can generate automatically web reports.
    When we go to generated web report, selection screen show us character � instead accent letters.
    In addition to this, generated web report shows two buttons with german text: "report ausf?" and "Werte zur?zen".
    Guaranteed Rewards points.

    Hi Peluka,
    are these web report generate by SAp Query ITS based. If yes this is the right forum to ask, if no I would sugest to ask in the BI forum.
    Best regards,
    Klaus

  • Benefits of SAP Business Warehouse Reporting compared with the Query-tools?

    Hello experts,
    I've been creating reports with SAP Query tools, but been faced with few problems. First of all, there are restricted possibilities in terms of joining tables, and thus I cannot include all the data required for the report.
    One solution for this would have been to create separate queries and join the data together in Excel. The problem with this is that there exists no common field that would make sense as for a selection criterion. If the selection criterion is different in different queries, there is the danger of combining false data together, which would eventually result with distorted data. 
    So I was wondering, could anyone briefly tell me if SAP Business Warehouse reporting would solve these problems? And what other benefits would it provide compared with the SAP Query? I'd urgently need to know if it would be a beneficial investment for the company, since I haven't found solutions for the problems occurred in the creation of reports.
    Thank you in advance for you help!
    Maria

    The answers are yes - and thousands of companies have gone down this route
    Puttingin BW is a strategic aim of the comapny and not to be thought about and discussed in a BI forum such as this
    The costs of implementation and hardware will no doubt make your eyes water.
    To be quite honest SAP BI is a "no brainer" as most of the new e-SOA and new R3 modules reply on BW for their reporting needs

  • Receiving an error in Print Report.vi in the Text Report Example.vi

    I am trying to run the "Text Report Example.vi" example under Windows XP Professional, MS Office 2003 and LV 6.1 and I get an error in the "Print Report.vi" saying that there is an unknown error (-2147452567). I have searched through the Knowledgebase and found a couple of things to try but none of them worked (namely this solution). Is there a known problem with Office 2003 and LabVIEW 6.1? I can run the same example on another computer that is running the same setup except that it has MS Office 2002 SP3 and it prints properly.

    There are several reasons why you could get this error. There was a problem with a DLL change that caused either an invoke node or a property node (sorry, I don't remember which) to need to be replaced or relinked. I think that this is the problem that you linked to.
    The other potential problem is that you could be calling a font that you have on one of the computers but not on the other.
    I hope that this helps,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Adding Fields to New Hire SAP Script, Text ID PAMA

    Hi there,
    I have successfully created a sapscript email to be sent via Dynamic Actions for the notification of New Hires and Terminations.  This has been accomplished via feature M0001 (we have created two new features u2013 M00NH & M00TM), dynamic action (T588z), Business Workplace, distribution lists, etc.  All are working correctly, and an email is being generated and forwarded to appropriate parties.
    Now we have been asked to add extra fields to the SAP Script text for New Hire and Termination.  These are text fields for Employee Group, Employee Subgroup, among others.
    Our syntax has been set up as follows:
    &'Employee Group:             'P0001-PERSG(02)&
    &'Employee Group Text:        'T501T-PTEXT(20)&
    &'Employee Subgroup:          'P0001-PERSG(02)&
    &'Employee Subgroup Text:     'T503T-PTEXT(20)&
    For the New Hire action, we are getting the Employee group and Employee subgroup codes to display but we are NOT getting the Employee Group or Employee Subgroup texts to display.  To confuse the issue, we ARE getting these text fields to display for the Termination script.  Our ABAP'er is also having difficulty determining how to bring in these fields to the New Hire script.
    We have researched this website have tried the instructions given by one user..... which states that we needed to go to our SAPscript text and make the following changes:
    " To get other HR data into your standard text (from SO10):
    Insert > Symbols > Program symbols (now you'll see a list of print programs, and i guess this is where the ABAP grabs the data).
    Highlight the one for HR Master data, and click the DDIC button.
    Double click the table you need data from (e.g P0000, P0001 or P0002).
    Finally select the field you want."
    I have done this, but when I get to the Program symbols, I do not see a print program for HR Master Data.  I only see RPUCOB02 - Processing of Qualifying COBRA Events and Letters & SAPMSSCE - SAPscript Standard Text Maintenance. 
    I tried to use the RPUCOB02 and inserted the text for Employee Subgroup as a test.  But it did not work as the text still did not display.
    The other oddity is that for the Termination sapscript text, the Employee Group and Employee Subgroup text displays correctly.  To test our syntax, we then connect the Termination sapscript text to the 'New Hire' action and reran the New Hire action.  The Employee Group and Employee Subgroup text fields then disappeared.  So it worked when the action was a termination, but did not work when the action was New Hire.
    The difference between these two actions is that the feature for the sapscript generation for New Hires is being generated upon saving of I0002 (which is created AFTER I0001) - we needed the Employee's name in the text.  For the Termination action, the feature is set to generate the mail upon saving of I0001.  This is the only difference between the two.  But as I need the employee name to display, it seemed the best approach.  I did try to generate the New Hire sapscript after saving of I0008, but had the same problem. 
    Does anyone know how we can add text fields to our New Hire sapscript text and actually get them to display?  We would also like to display the Org Unit text (&'ORGEH_2nd_TEXT(40)&) or even  the Supervisor (from the OM relationship).  But they do not display for the New Hire sapscript either. And our ABAP'er is able to insert the Supervisor logic, but the field still does not display.
    Thanks very much for any help.
    Edited by: Cathryn Westgarth on Nov 17, 2009 6:23 PM
    Edited by: Cathryn Westgarth on Nov 17, 2009 6:24 PM

    I am going to repost this question to the HR forum as it may be more appropriately an HR forum questions.
    Thanks
    Cathryn

  • Report for time log on detail for each employees in SAP ABAP-HR report

    hi experts,
          please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                      thank you

    Hi,
    For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
    Example:
    DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
       INFOTYPES:  0000, 0001, 0002, ...
                         2001 MODE N, 2002 MODE N, ...
         GET PERNR.
       BEGDA = '19900101'. ENDDA = '19900131'.
       RP_READ_ALL_TIME_ITY BEGDA ENDDA.
       IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
          WRITE: / 'Authorization for time data missing'.
          WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
       ENDIF.

  • MATMAS01 IDOC not reaching to SAP XI via report program.

    Dear Experts,
    WE are facing small challenge.
    I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
    Problem:
    MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
    Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
    The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
    What could be the wrong ?
    Thanks
    Divyesh

    When sending Idoc from R/3,
    Settings at R/3
    create one port at WE21,
    Create Partner Profile for Outbound Message type in WE20.
    settings at XI
    Create one port in IDX1
    Import Matadata in IDX2.
    Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
    Check these settings & send test idoc using WE19.

  • SAP CRM Interactive Reports in Interaction Center

    Hi
    I am trying to use SAP CRM Interactive reports. I am aware that we don't need a separate  BW serve for it. Do we need a separate local BI client or can we just use them through the IC_MANAGER Role?
    What are the settings to enable interactive reports?
    How can I create Interactive reports through the Analytics role?
    All help is greatfully appreciated.
    Thanks
    Tarang

    Take a look at  [SAP Help Topic 'CRM Interactive Reports'|http://help.sap.com/saphelp_crm70/helpdata/en/61/553f78fc3c48c894c082d0fb23ef0f/frameset.htm]
    Also you can refer to best practice building block [C41: CRM Interactive Reporting|http://help.sap.com/bp_crm70/BBLibrary/HTML/C41_EN_DE.htm].

  • SAP Record-to-Report in SAP FI

    Hi SAP Gurus,
    I want the details of SAP Record-to-Report and any configuration steps also.
    Help me ASAP.
    Regards
    Shruthi

    Bashir,
    Report to Report Interface doc
    This is called "opendocument", which is a special facility within the software that allows you to build a hyperlink on a value in the "parent" report, then click on that link and it passes a response to the "child" report that would be prompting for the same.  Once the parameter is passed the "child" report appears.  Depending on the version (XI R2 or XI 3) determines how the hyperlink is built.  Please refer to the appropriate documentation for the version you are working under for the correct syntax/workflow to create the hyperlink.
    Thanks,
    John

  • How can I add the number of columns/row starting with the build in "Text Report" example in the LabVIEW

    Hi All,
    I am wondering how can I add the numbers of row and column from the existing build-in "text report"
    VI ? If possible, would you mind showing me step-by-step because I am a new user and I am not familiar with the labview software.
    Thanks

    Hi,
    Easy text Report is for saving to a file. Do you mean you just want to add the totals of two arrays and write that? In that case I would just append the totals before writing to file.
    Jeff | LabVIEW Software Engineer

  • Module Pool Programming - Calling SAP Standard Text Screen

    Hi Gurus
    I am working on Module Pool Programming...In the one of the screen there is a column named "Description"  where I need to keep a Button to call a SAP standard text editing screen and what ever information I enter in the field should be downloadable
    is this option possible?If so...Plz send me the Sample code
    Thanks
    Ganesh

    Hi Gani,
    I can help you till getting the text editor in your module pool program.
    TOP
    PROGRAM  ZREDDY_TEXT.
    constants: line_length type i value 132.
       data:
    reference to wrapper class of control
       g_editor type ref to cl_gui_textedit,
    reference to custom container: necessary to bind TextEdit Control
       g_editor_container type ref to cl_gui_custom_container,
       g_repid like sy-repid,                        " getting program name
       g_ok_code like sy-ucomm,                " return code from screen
       g_mytable(132) type c occurs 0,        " getting the text of table
       g_mycontainer(30) type c,                " string for the containers
       v_result(256) type c,                        " getting the text of table control
       gw_thead like thead,                        " for header information
       it_line type table of tline with header line. " internal table of type tline
    PBO
    MODULE STATUS_0900 OUTPUT.
      SET PF-STATUS 'ZTEXT'.
    SET TITLEBAR 'xxx'.
    if g_editor is initial.
    create control container
       create object g_editor_container
       exporting
       container_name = 'CUSTOM_CONTROL' " Make sure when you create custom container in layout give name as Custom container
       exceptions
       cntl_error = 1
       cntl_system_error = 2
       create_error = 3
       lifetime_error = 4
       lifetime_dynpro_dynpro_link = 5.
       g_mycontainer = 'CUSTOM_CONTROL'.
    create calls constructor, which initializes, creates and links
    TextEdit Control
      create object g_editor
       exporting
       parent = g_editor_container
       wordwrap_mode =
    cl_gui_textedit=>wordwrap_off
       cl_gui_textedit=>wordwrap_at_fixed_position
    cl_gui_textedit=>WORDWRAP_AT_WINDOWBORDER
       wordwrap_position                      = line_length
       wordwrap_to_linebreak_mode     = cl_gui_textedit=>true.
       refresh g_mytable.  " to initialize table upon OK_CODE 'BACK' at PAI
       endif.
    ENDMODULE.                 " STATUS_0900  OUTPUT
    Cheers!!
    Balu
    Edited by: Balu CH on Oct 22, 2008 8:55 PM

  • I can't append control image to report on 1 page with appended text report

    I am attempting to create a report which is simply header, experiment information, and two graphs of data. I am using a Easy Text Report and Append Control Image to Report. I have successfully printed out this report, but on two separate pages. The header info is on the first page, and the graphs on the second page. This doesn't seem to be a margins problem, as the header is very brief and the graphs aren't that large either. I would like to make this into a one page report.  Any help is greatly appreciated.
    Message Edited by csmrunman on 01-15-2010 10:18 AM

    Nevermind. I neglected to see the Append Report Text.vi. That solved everything.

  • How to Include JAVA script code in SAP BI7 web Reporting?

    How to Include JAVA script code in SAP BI7 web Reporting?

    In nw2004s there is a new web item called "Script" web item which lets you add javascript code. When you add javascript code in this web item, you don't need the opening and closing <script> tags...
    Hope it Helps
    Chetan
    @CP..

  • Use dot matrix printers for printing text reports in Reports 10g

    In Forms 6i, customers had the option to use dot matrix printers for printing text reports.
    I believe, from 9i onwards, text based reports aren’t supported and instead HTML/PDF,DOC,RTF reports are supported which are not text based and use modern day printers.
    Is it still possible to use text printers ??
    Regards,
    Noman

    hi
    check out the following link.
    Re: Is printing to generic text printer and hand-coding the report possible?
    http://download.oracle.com/docs/html/B10314_01/pbr_uxprt.htm#1005700
    sarah

Maybe you are looking for