Sap query AND sapnwrfc

Hi all,
I have a working "sap query" (sq01).
This query prints the list of our material catalog (module MM).
My problem is to write an external program that displays the same output.
To this purpose I installed "sapnrfc".
All works correctly: I can connect to SAP, read a table (for example MARAV) and output the content.
In SAPGui (sq01), I selected "InfoSet Query" and then "Display field information".
I see (for example) that the "Material Number" is stored in the table MARAV (field MATNR).
The problem is that in my "sap query" there are a couple of fields that I do not know where they come from.
Selecting "Display field information" for these fileds I only see:
TXT_ITA (Additional field)
TXT_TET (Additional filed)
Where is this information stored ?
Perhaps there is a view ... or a better method.
Thanks for any help.
Miche

Dear Sathya,
SAP does not allow you to rename SAP Query & Info set at a same time.
Note:
The system has to lock the following objects before you are able to use the Rename SAP Info set function:
User group catalog
Info Set catalog
Query catalogs for user groups to which the Info Set that you are renaming is assigned,
Queries using this Info Set
Once all these locks have been set, the system can carry out the function.
Renaming an Info Set can, however, be very time-consuming. These locks may also prevent other users from working in the system for as long as it takes to rename the Info Set.
Thanks & Regards
Dinu

Similar Messages

Autorization issue with SAP Query and RPTQTA10

Dear all,
I am having some difficulties with autorisations in SAP Query and Report RPTQTA10.
in IT2006 I have a subtype 03 which should not be accessible for a group of users.
Also I have created a test employee with a sybtype of IT2006 which is allowd and one which is not allowed.
When I run some reports with that user I get a nice result with PT50. Only the allowed subtypes are being displayed.
When I try to run A SAP Query or report PRTQTA10, the employee is not visible and seems to end op in an error list.
Can someone shed some light on this issue?
Kind regards,
Patrick

Hallo,
Follow like this...
Role 1:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 01, 02 - Keep only sub type 01, 02
fuction group: * -Ok
Role 2:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 03 - Keep only sub type 03
fuction group: * -Ok
Then user who want only sub type 01 & 02 then assign role 1 and he will not have access to sub type 03
User who want only sub type 03 access, then assign role 2 only so that he will not have access to sub type 01 & 01
User who want sub type 01, 02 & 03 access, gibe Role 1 & Role 2
Hope it clarifies.
Regards,
Purnima

SAP Query and infoset rename

HI
Is it possible to rename sap query and infoset at a same time instead of changing one by one.?
Thanks
reg
cns

Dear Sathya,
SAP does not allow you to rename SAP Query & Info set at a same time.
Note:
The system has to lock the following objects before you are able to use the Rename SAP Info set function:
User group catalog
Info Set catalog
Query catalogs for user groups to which the Info Set that you are renaming is assigned,
Queries using this Info Set
Once all these locks have been set, the system can carry out the function.
Renaming an Info Set can, however, be very time-consuming. These locks may also prevent other users from working in the system for as long as it takes to rename the Info Set.
Thanks & Regards
Dinu

Diff between sap query and abap query

diff between sap query and abap query

Hi,
ABAP query is mostly used by functional consultants.
SAP Query :
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query,:
As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
regards,
vasavi.
reward if it is helpful.

Difference between sap query and sap ad hoc query

Hello Experts-
Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
Thanks,

Hi,
SAP Query
Purpose
The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
All data required by a user for a report can be read from various tables.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
AD Hoc Query
Definition
A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
Use
You can use the Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
In particular it enables you to:
·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
·        Restrict or filter key figures and characteristics
·        Use predefined key figure structures and restricted or calculated key figures in the query
·        Set or change query properties and key figure/characteristic properties in the query
·        Create or change conditions and exceptions
When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
·        You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
-        You cannot use key figures or key figure structures in the filter.
-        You cannot define exception cells, since this requires two structures.
You cannot create the following objects using the Ad-hoc Query Designer Web item:
-         Reusable structures
-         Reusable restricted key figures
-         Reusable calculated key figures
-        Local calculated key figures
You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
"Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
Reward points if useful....
Regards
AK

Sap query and additional fields.

Hello guys.
ABAP it's not my strong skill, but i need to develop some report.
What i need:
input: material, SLED, plant
output: material, SLED, plant, values from characteristic field.
I have created sap query with additional field type c.
Below my code:
TYPES: BEGIN OF charast,
        ATNAM(50)    TYPE c,
        ATWTB(8)     TYPE n,
        X(50)        TYPE n,
        C(50)        TYPE n,
        ATINN(50)    TYPE n,
        END OF charast.
DATA: char TYPE TABLE OF charast WITH HEADER LINE.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR              = MCH1-MATNR
     CHARG              = MCH1-CHARG
     GET_CLASSIFICATION = 'X'
   TABLES
     CHAR_OF_BATCH      = char.
LOOP AT char into TEST (This is an additional field type C.
   ENDLOOP.
Questions:
1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
5. How i can return result of a program not only to additional field but to layout?
Sorry for noob questions and thank you in advance guys!

Well, seems like it work fine for me.
Below my crappy, but working code:
DATA: material TYPE MCHB-MATNR,
       batch    TYPE MCHB-CHARG,
       plant    TYPE MCHB-WERKS,
       sloc     TYPE MCHB-LGORT,
       gtdt     TYPE STANDARD TABLE OF clbatch,
       gtdit    TYPE clbatch.
SELECT MATNR INTO material FROM MCHB
   WHERE MATNR = MCHB-MATNR.
ENDSELECT.
SELECT CHARG INTO batch FROM MCHB
   WHERE CHARG = MCHB-CHARG.
ENDSELECT.
SELECT WERKS INTO plant FROM MCHB
   WHERE WERKS = MCHB-WERKS.
ENDSELECT.
SELECT LGORT INTO sloc FROM MCHB
   WHERE LGORT = MCHB-LGORT.
ENDSELECT.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR = material
     CHARG = batch
     WERKS = plant
     GET_CLASSIFICATION = 'X'
    TABLES
      CHAR_OF_BATCH = gtdt.
READ TABLE gtdt INTO gtdit
   WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
GTD = gtdit-ATWTB.

SAP Query and selection screen fields

Hi,
I am currently modifying a Query. I have added a new selection field. The fieldname for this selection field has been autogenerated within the query and I have pasted a bit in here:
SELECT-OPTIONS SP$00015 FOR ZERROR_FLG LOWER CASE.
SELECT-OPTIONS SP$00022 FOR KNA1-ERDAT.
SELECT-OPTIONS SP$00023 FOR KNA1-ERNAM.
SELECT-OPTIONS SP$00027 FOR ZLOEVM LOWER CASE.
SELECT-OPTIONS SP$00030 FOR ZPARTNERNO
NO INTERVALS NO-EXTENSION.
I relation to this select -option, I want to execute a few lines of code that only is executed if the user has filled in a value in teh ZPARTNERNO field. However, no matter if I use the field name ZPARTNERNO or SP$00030 it has no effect.
Any good ideas ?

HI,
In the AT SELECTIOn-SCREEN event, you can write the code
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF.
if you want in START-OF-SELECTION>
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF
Regards
Sudheer

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

SAP Query and MBO

Hi all,
I'm trying to create a query for MBO appraisals. But I've got no idea how the appraisal form (VA) and the employee (P) are assigned to each other.
The query should deliver the appraisal results for an employee and some additional data like company code, employee group and somthind like that of the employee.
But where is the link between the appraisal and the appraisee (employee)?
I expected to find it in infotyp 1001 but I can't find nothing.
Thanks for your hints.

Hi, Walter,
Use logical database PCH and determine object type BA ie appraisal
You will get the list of related infotypes.
From where you can select infotypes according to your requirement.
Warm Regards,
Kapil Kaushal

VC and SAP Query

System Landscape
NW Sneak Preview Java Edition with EP 6.0 (from SDN)
VC 6.0, Patch 5
R/3 Enterprise 4.7 extension set 200 (WAS 6.20)
Scenario
Utilize the BI Kit in VC and use SAP Query from a backend R/3 system to generate VC content.
(From what I have understood, the BI Kit does not necessarily need BW and can work with a R/3 source)
Questions
(a) Is the assumption correct that the BI Kit can use the SAP Query as a backend to generate content in VC (without a BW system in the landscape)?
(b) Do I need to install the BI UDI SP stack with the EP in NetWeaver Sneak Preview ?
(c) What type of systems do I need in the EP ? If I try the "New System" wizard, I do not get an option to connect to a "BI" system. nevertheless, if i try "new from PAR", i have a an option to use "com.sap.portal.systems.BIUDI". Can you help me with the parameters for a PAR - "com.sap.portal.systems.BIUDI" ?
any other tips / experiences of working with SAP Query and VC are most welcome.
Regards, Parag.
Note: I have tried a R/3 system connection and the RFCs are visible in VC

Thanks a ton Mario, your hints helped me in arriving at the configuration.
For the sake of completeness, I am listing the steps that led me to a successful config.
1. Download the BW 3.5 SR1 installation guide from service marketplace
2. Goto section 6 and perform the steps highlighted for BI Query Connector. Note that if you dont assign a value for the parameter "SERVERGROUP", the default is PUBLIC. So if you have a server with only SPACE (like I had), please do enter "SPACE" for this property.
3. Edit the services file on the Windows Server and add an entry for your SAP server. For example, my server SID is DEV, hence I inserted the following entry in the service file: sapmsDEV 3600/tcp
This step is necessary for JCo to work.
4. Stop and Re-start the BI Query service (using the Visual Administrator)
5. Test the connection with the following URL - http://<host>:<port>/TSapq/servlet/TestSapq
This should list you the queries in the SAP system
6. Open EP (I logged in as admin) and add the system as described in Step 4, section 2.2 of the VC installation guide.
7. Add permission for "everyone" group to this system
8. Login to EP with another userid, perform user mapping (personalize option)
9. Start VC storyboard, login to EP with the other userid (not admin), use Data Service or BI Query Wizard to retreive the queries.
Why did I have to use another userid ?
Well, this was because the connection test did not work for me with the admin user, nor was I able to retrieve the queries in VC. Dont know why this didnt work.
Message was edited by: Parag Jain

ABAP Reports and SAP Query

Hi Experts,
I have question regarding ABAP Reports, SAP Query, and Transaction with variant. How are we securing one the above reports that we assign them through pfcg. We can secure custom program by custom transaction or define the auth group in S_PROGRAM auth object but in this case we have to assign SA38 in production. is that correct?
Please help me understand difference between the ABAP reports and SAP query. Is the ABAP reports same as Program or they are different.
Thanks in advance
Faisal
Edited by: Faisal on Jun 30, 2009 11:06 PM

Hi,
1) End user security (role matrix coordinate with process team)
This role Matrix design is most important where we can put restrictions and use SoD.
2) Secure Table (by auth group)
Table TDDAT and use of transaction se54 for security tables to right auth Groups. Secure s_tabu_dis, s_tabu_cli.
3) Secure program (as you said ABAP reports are referred to Program)
Use of table TPGP and program RSCSAUTH for assignment of groups to Program. SA38 Running of SA38 requires a minimum SUBMIT in user Action. A user having SA38 is dangerous as he/she is now enabled to run any report. Hence protection in Auth Group is needed. Verify each and every program is having authority check statement and Auth Group or not before assigning sa38. As you mentioned its best to avoid SA38 and create CUSTOM TXN for each report.
(We should also SECURE S_DEVELOP in Production properly along with ur points. Please Note).
4) Secure some batch jobs roles for batch job
Secure by s_btch* objects and less access to se36.
5) Create support roles for cutover activity during Go-live
That is always needed. Go ahead.
6) Emergency roles & IT roles for support
This is very much needed as a role of Mitigation and Fire Fighting for Temporary access. Ensure to enable ur audit parameters in RZ10 (rsau* sm20,RSLG* for sm21). Give emergency access but enable audit via sm19 and get audit reports from sm20 and sm21 immediately after the use of emergency access.
There are also other auth objects we need to be care ful which is a long list and hope every body ensures that (s_cts,a_admi,s_trans, tables ssm_cust, prgn,t000) etc and a host of others. Besh wishes. Let us know if any issue.
Regards
Aveek.

How to call SAP query in a program

Hi experts
I have created a query in SQVI its gives a result. Now i want this query to be used in my program. Is there any FM which gets the quary name and populates the result in iternal table. So that i can use that result.
I know without query you can write using the tables you can fetch the records but i just want to explore a new way to do things. If any body done such type let me know and also give some sample code or process how to achieve it.
Regards
Vijay

Hi Siva
My final option is that only. That you can do any how. But my intension is to learn something new way. How to do copy the query and where to inject the code is there any example in wiki or artical for that. I want to something new. Old way of creating a report program is possible i want to do this way. If some body could help me out.
@ karthik
I have generated the SAP query and i got the program but when i view the code i dont find any select statment or where storing my input data. How to identity that i did in debug mode but am not sure where it pulls the data and where it put in internal table. Can you throw some light with example code or an article.
Regards
Vijay

SAP Query - Modfication/Changes

Hi Experts,
I am new SAP Query, so i have come up with this issue. Please help.
I have an infoset query with me, also a SAP query and a transaction with some Z transaction code, the program name as taken from System->Status is AQZZZSD=========Z_SD_ORD_WO_ST.
1. Now I can see code in the program, but I cant see that much of code in the SQ02 under extras tab.
2. Moreover, I have to change the code to address new requirements. How can I change the code in a SAP query???
What are the ways to change an existing SAP query's code ???
Thanks,
Chandan

Hi Chandan,
Go to Infoset (SQ02) in change mode, click on Code icon (Sfift + F8) displayed on Application bar.
You will find, 'Code section' where different events are listed. You can write your code in any of listed events depending on your need.
For ex. if you want declare any variable in u2018DATAu2019 Section, to initialize any variable can use INITIALIZATION event.
If you want to perform operation on selection screen you can use 'AT SELECTION-SCREEN OUTPUT'
And most important event for this tool is Record Processing event like if you want to have any condition and calculation or modification of field value, you can write code in this event.
END OF SELECTION BEFORE LIST--> You can write header information in this event. After this information, your output is displayed. (User WRITE statement to write your information)
END OF SELECTION AFTER LIST--> You can write footer information in this event. After query output, information mentioned in this event is displayed.
Note: END OF SELECTION BEFORE LIST and END OF SELECTION AFTER LIST work only when output format of your query (SQ01) is u2018ABAP LIST'
GET and GET LATE: When you select a logical database as a data source of an infoset, you get this additional event to maintain the code as per your need for LDB.
Please let me know if you need any further details.
Regards,
Dinesh
Edited by: Dinesh Tiwari on Sep 30, 2009 7:21 AM

Help needed on creating a SAP query

Hi All,
Can somebody give me the step by step procedures of creating a SAP query and Infoset.
My requirement is to display asset master details with Asset number or Asset class as input.
Any pointers or links to create an infoset and query will br highly helpful.
Thanks,
Arun

Here are couple of fields you might be needed :
AGKO     Cleared Accounts
ANAR     Asset Types
ANAT     Asset type text
ANEK     Document Header Asset Posting
ANEP     Asset Line Items
ANEV     Asset downpymt settlement
ANKT     Asset classes- Description
ANLA     Asset Master Record Segment
ANLB     Depreciation terms
ANLC     Asset Value Fields
ANLH     Main asset number
AT02T     Transaction Activity Category- Description
AT02A     Transaction Code for Menu TIMN
AT10     Transaction type
AT10T     Name of Transaction Type
BKDF     Document Header Supplement for Recurring Entry
BKORM     Accounting Correspondence Requests
BKPF     Accounting Document Header
BLPK     Document log header
BLPP     Document log item
BLPR     Document Log Index and Planned Order (Backflush)
BNKA     Bank master record
BP000     Business Partner Master (General Data)
BPBK     Doc.Header Controlling Obj.
BPEG     Line Item Total Values Controlling Obj.
BPEJ     Line Item Annual Values Controlling Obj.
BPEP     Line Item Period Values Controlling Obj.
BPGE     Totals Record for Total Value Controlling obj.
BPJA     Totals Record for Annual Total Controlling Obj.
BSAD     Accounting- Secondary Index for Customers (Cleared Items)
BSAK     Accounting- Secondary Index for Vendors (Cleared Items)
BSAS     Accounting- Secondary Index for G/L Accounts (Cleared Items)
BSEC     One-Time Account Data Document Segment
BSEG     Accounting Document Segment
BSID     Accounting- Secondary Index for Customers
BSIK     Accounting- Secondary Index for Vendors
BSIM     Secondary Index, Documents for Material
BSIS     Accounting- Secondary Index for G/L Accounts
CEPC     Profit Center Master Data Table
CEPCT     Texts for Profit Center Master Data
COBRA     Settlement Rule for Order Settlement
COBRB     Distribution Rules Settlement Rule Order Settlement
COKA     CO Object- Control Data for Cost Elements
COSP     CO Object- Cost Totals for External Postings
COSS     CO Object- Cost Totals for Internal Postings
CRCO     Assignment of Work Center to Cost Center
CSKA     Cost Elements (Data Dependent on Chart of Accounts)
CSKB     Cost Elements (Data Dependent on Controlling Area)
CSLA     Activity master
FEBEP     Electronic Bank Statement Line Items
FPLA     Billing Plan
FPLT     Billing Plan- Dates
GLPCT     EC-PCA- Totals Table
KNA1     General Data in Customer Master
KOMK     Pricing Communication Header
MAHNV     Management Records for the Dunning Program
REGUT     TemSe - Administration Data
SKA1     G/L Account Master (Chart of Accounts)
SKAT     G/L Account Master Record (Chart of Accounts- Description)
SKB1     G/L account master (company code)
T003T     Document Type Texts
T007S     Tax Code Names
T087J     Text
TAPRFT     Text tab. for investment profile
TKA01     Controlling Areas
TKA09     Basic Settings for Versions
TKVS     CO Versions
TZB0T     Flow types text table
TZPAT     Financial Assets Management product type texts
VBSEGS     Document Segment for G/L Accounts Document Parking
VTBFHA     Transaction
VTBFHAPO     Transaction Flow
VTBFHAZU     Transaction Activity
VTBFINKO     Transaction Condition
VTIDERI     Master Data Listed Options and Futures
VTIFHA     Underlying transaction
VTIFHAPO     Underlying transaction flows
VTIFHAZU     Underlying transaction status table
VTIOF     Options Additional Data
VWPANLA     Asset master for securities

Problem with a SAP Query

Hello all,
I am working on an sap query and i am running the query for a date intreval say for the current month. But the query is picking the date from the infotype begindate and not the interval with which i am running.
What might be the possible cause for this.
Thanks,
Krishna

Hello Krishnakumar,
U have selected the fields in query from the infoset and u r entering the value in the same now as the query the program should use the values entered in the fields selected from query unless u have create local fields which are not connected the the database.
What is the data selection?

Sap query AND sapnwrfc

Similar Messages

Maybe you are looking for