Sap Query Link Tables

Hi,
I badly need your help..
How can I link Table LIPS to VBEP using SAP QUERY? I have join these two tables using key field VGBEL = VBELN and VGPOS=POSNR but database access takes too long..
I need to get Schedule line delivery date(VBEP- EDATU ) where ETENR = '0001' only.
Please help me!
Thanks!

Hi ,
get VBFA also in this loop ? or else search for LDB.
check LDB <b>ALV</b>
Regards
Prabhu
Message was edited by: Prabhu Peram

Similar Messages

SAP Query Alias Table in Info-set not working

Hi Guys,
I'm having a bit of trouble with a query I'm writing in SQ01.
I am trying to create a standard margin report between two different costing variants that we use.
n order to do so I have had to employ the use of alias tables.
I have named the alias tables KEKO_2 and KEPH_2 accordingly and joined them in the info set with the same joins as the original tables (Left Outer to MARC on MATNR and WERKS)
However, when I have come to test the query in SQ01 I get a runtime error which states the following:
The following syntax error was found in the program
AQA0MASTER_DATA=STANDARDMARGIN :
"Field "KEPH_2-KST001" is unknown. It is neither in one of the specified
tables nor defined by a "DATA" statement . . . . . . . . . ."
But it is in a specified table! My alias table.
How can I make this query work?
Any help would be appreciated.
Thanks in advance.

Hi,
This is SAP business one reporting and printing forum. Please find correct forum and repost your question to get quick assistance.
Please close this thread by marking helpful answer.
Thanks & Regards,
Nagarajan

SAP Query (InfoSet) - table %DTAB

We have just upgraded to ERP2004 (from 4.6C) and, in addition to direct ABAP coding, I use the Query tool a lot.
From the code generated by the query application generator, it appears that the output table is now %DTAB.
I could be extremely usefull to be able to modify the content of this table before output (ex. at END-OF-SELECTION).
However, reference to this table (ex. in a LOOP) causes a syntax error, as the declaration of %DTAB is not "visible".
Do anyone know how to overcome this problem?

http://stackoverflow.com/questions/3765373/how-do-i-do-a-select-distinct-using-a-sap-infoset-query

SAP QUERY/INFOSET with OUTER JOIN

Hi,
I have created an infoset (SQ02) using two tables for SAP query.
Table: AGR_TEXTS. Fields: AGR_NAME, SPRAS, LINE, TEXT.
TABLE: AGR_FLAGS. Fields: AGR_NAME, FLAG_TYPE, FLAG_VALUE.
Joined these two tables using outer join. Defined the join condition as AGR_NAME = AGR_NAME. Saved and Generated the infoset.
Created SAP Query (SQ01) using the above created infoset.
In the basic list,
Marked AGR_NAME (AGR_TEXTS), TEXT, FLAG_VALUE as listed fields.
Marked AGR_NAME (AGR_TEXTS), SPRAS, LINE, FLAG_TYPE as selection fields.
Save the query. When execute the query provided the inputs for all the selection fields in the selection screen as given below:
AGR_NAME=Z*
SPRAS=E
LINE=00000
FLAG_TYPE=LICENSE_01
Executed the Query.
Got the results only the matched records as per the selection field FLAG_TYPE.
But I want all the records from table AGR_TEXTS and matched records from table AGR_FLAGS.
I want the report (output) as below,
_AGR_NAME                                               TEXT                                                                                  FLAG_VALUE_
ZCA_BASIC_ACCESS_GLOBAL     Non-critical basic access for all users.                                       53
ZCA_BASIC_ENDUSER_ACCESS     UK:CA Basic Enduser Access
ZCA_BASIC_ENDUSER_ACCESS_UK     UK:CA Basic Enduser Access UK                                        52
ZCA_BASIC_ENDUSER_SU52_UK     UK:CA Basic Enduser Access to change Parameter ID's
But I got the report (output) as below,
_AGR_NAME                                                TEXT                                               FLAG_VALUE_
ZCA_BASIC_ACCESS_GLOBAL     Non-critical basic access for all users.     53
ZCA_BASIC_ENDUSER_ACCESS_UK     UK:CA Basic Enduser Access UK     52
Apprecited your help. Thanks.
Code Formatted by: Alvaro Tejada Galindo on Dec 30, 2009 2:20 PM

Identify a KF for which there are non-zero values for all accounts in the cube.
Create the query with Account (from MP coming from both IO and cube) and this KF. KF will have 0 values for accounts not existing in the cube. Create a condition to show only the 0 value for the KF. This should show you all the accounts in the IO which are not in the cube.

SAP query output modification

Dear all,
Currently in one sap query having tables EKBE and other tables, output is comming. But now I need to add some more data from the table EKBZ to the same columns of the output which are from EKBE. If i use join then i need to use separate column for EKBZ, but i want EKBZ data ( additional records) to the same columns of EKBE in the output in addition to to the records of EKBE . Please help me how to do this.
Thanks,
Prasad

thanks for your reply dear. Actually its not my requirement.
But I found the answer my self. I have created the separate internal table and selected the data directly from the database table ( like normal report) and inserted my records at the event 'At end of selection after processing' into the auto generated internal table using field symbols.

How to write ABAP Logic in SAP Query to fetch records from many Tables

Hi Expert,
I have one requirement, want to display all BOM (Equipment BOM, Function Location BOM and Meterial BOM) from a particular plant.
List of tables as below:
EQST: Equipment to BOM Link
TPST: Link Between Functional Location and BOM
MAST: Material to BOM Link
STPO:BOM item
Requirement: When user enters Plant then SAP Query should execute and fetch all BOMs (as mentioned above) from STPO Table.
I have done so far is as follows:
I create User Group, Infoset and SAP Query.
While creating INFOSET, i used 4 tables (EQST,TPST,MAST & STPO) and link between then is as follows:
STPO-STLNR ---> EQST-STLNR : Left Outer Join
STPO-STLNR ---> TPST-STLNR : Left Outer Join
STPO-STLNR ---> MAST-STLNR : Left Outer Join
Now its showing all BOM from all plants though I enter one Plant value.
Please advise me to write SAP Query and Logic to fetch all BOM from selected Plant Value.
Thanks,
Jay.
Edited by: jaykrishna007 on Jul 29, 2011 11:41 AM

Hi FCannavo,
Thanks for your quick reply.
See, now I changed my Infoset design.
I added one Plant Table (T001W) and then
T001W-WERKS--->EQST-WERKS
T001W-WERKS--->MAST-WERKS
T001W-WERKS--->TPST-WERKS
and then
EQST-STLNR--->STPO-STLNR
MAST-STLNR--->STPO-STLNR
TPST-STLNR--->STPO-STLNR
on selection screen, user will enter Plant Value.
Now its showing some records, but i dont think so i would be correct output or not, please guide me whether it is correct or not?
Thanks,
Jay.

Creation of SAP Query in SQ02 with Single Table With Condition

Hi All,
I want to Create SAP Query in SQ02 using single Table MCHA.
ii) I dont want all entries of MCHA Table I mean , I have to apply some Condition on this Table.
i.e Suppose I am having actual data in MCHA table is like this for Material M1.
Plant    Material   Batch   BatchCreationdate
P1          M1         B1       20.06.2007
P2          M1         B1       04.05.2009
P3          M1         B1       04.05.2009
But I want the Output of SAP Query is like this:
   Material   Batch   BatchCreationdate
      M1         B1       20.06.2007
That is irrespective of Plant if Material & Batch are equal ---> 1st record with Lowest date shoud get at the output.
Please help me How write the code on single table in the SAP Query.
Thanks,
Kiran Manyam

Hi,
Your query should be like this:
Select MATNR CHARG HSDAT
from MCHA
into table t_mcha
where matnr = Materlal number from selection screen.
The structure of t_mcha should contain the fields that you select.
Then sort the table by date ascending
Sort t_mcha by HSDAT.
Hope this solves your problem.
Thanks,
Sowmya

How to find the report for the SAP query (Query exists in table AQLQCAT)

Hello Experts,
I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing AQusergroupquery name* in transaction SE38.
But unfortunately the program does not exists for the given paramenter.
Could you please let me know how to get the report name for the SAP Query.
Secondly please suggest any other way of checking the tables used in the SAP Query.
Also the table name from where i can download the SAP Queries.
Thanks in advance.
Regards,
Rahul Sinha

I suggest you a simple method.
Execute the query. When the selection screen is showed, go to menu and click to SYSTEM->STATUS.
Check the program name and double click it to access the program code.
Search for tables or functions into the source code in order to understand where data are taken.
If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
Best regards.

SAP Query error for VBAK and KONV tables

Dear Experts,
Want to create SAP Query for below requirement but faced some error
Step1) Extract the data from VBAK table w.r.t. order type , Sale org and date range
and collected the Sales order numbers and doc. condition record (KNUMV)
Step 2)In table KONV (Transactional condition record data) in this table provided input as doc. condition record (KNUMV) with respect to condition type ABCD
Manually i extracted data, there is no problem .
But customer want to generate SAP Query for above requirement
I tried to create but in t.code SQ02 when i tried to join the table VBAK and KONV i faced the below error
Table KONV cannot be used in a join.
How can I create SAP query for above requirement ???
if its not possible then create Z report is the only solution ??????
Thanks in advance

Hello
You can not create Query report with joining KONV. But there is one solution for your problem. You can create Query report by using Database VAV. In this logical database you will find all SD tables and also KONV. Use only those tables and fields which you want in your query report. I have checked this and its working
Please try this and update the forum accordingly.
Edited by: moazzamjii on Jun 30, 2011 12:13 PM

SAP Query - Additional field that collects information from table RESB

Hello gurus. I have a question.
I want to create a SAP Query that shows me the stock level of a list of materials, and also show me the total quantity of order reservations in an additional field.
I created an InfoSet with table MARD, which is the one that holds the Stock information in a plant. Then I created an additional field which would read information from table RESB, the table that holds order reservations per material.
So I wrote this piece of code:
SELECT * FROM RESB
WHERE MATNR EQ MARD-MATNR and
       WERKS EQ MARD-WERKS.
ENDSELECT.
if ( sy-dbcnt NE '0').
      MOVE RESB-BDMNG to ZQTY.
ELSE.
      MOVE '' to ZQTY.
ENDIF.
This works fine. However, this is currently just catching the first record in table RESB that matches my condition.
What I would like is to collect every instance of RESB-BDMNG and add them to field "ZQTY", have it loop in RESB until it finishes finding every record that match the MATNR and WERKS. With this I could get the total number of order reservations that this material has in that table.
Could someone share some coding that would help me achieve this?

Yes! That did it. That's what I needed to do. Thank you so much.
While I'm at it, let me ask you a related question.
When I execute the query, in the first records of the query where there's no value from RESB to transfer, the value of field ZQTY appears empty. Once it finds the first record in RESB and it populates ZQTY with a value, then the rest of the records with no hit get the proper value of 0.
Do you know why the first records in the query appear empty and not with a 0? Is there anything I should add to the coding to fix this?

SAP Query PNPCE LDB with additional table.

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
The fields of ZPA9050 is not available as selection fields when I try to Query through SQ01.
(How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01).
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
What needs to be done in order to get them as Selection fields (Input Fields)
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Pradeep

Hello,
at the time of cretaing INFOSET using transaction SQ02. You can click on the Extra button nad than on the selection tab to add some fields on the selection screen.
Reward if useful
Mohit

Simple Query in Oracle Linked Table in MS Access causes full table scan.

I am running a very simple query in MS ACCESS to a linked Oracle table as follows:
Select *
From EXPRESS_SERVICE_EVENTS --(the linked table name refers to EXPRESS.SERVICE_EVENTS)
Where performed > MyDate()
or
Select *
From EXPRESS_SERVICE_EVENTS --(the linked table name refers to EXPRESS.SERVICE_EVENTS)
Where performed > [Forms]![MyForm]![Date1]
We have over 50 machines and this query runs fine on over half of these, using an Oracle Index on the "performed" field. Running exactly the same thing on the other machines causes a full table scan, therefore ignoring the Index (all machines access the same Access DB).
Strangely, if we write the query as follows:
Select *
From EXPRESS_SERVICE_EVENTS
Where performed > #09/04/2009 08:00#
it works fast everywhere!
Any help on this 'phenominon' would be appreciated.
Things we've done:
Checked regional settings, ODBC driver settings, MS Access settings (as in Tools->Options), we have the latest XP and Office service packs, and re-linked all Access Tables on both the slow and fast machines independantly).

Primarily, thanks gdarling for your reply. This solved our problem.
Just a small note to those who may be using this thread.
Although this might not be the reason, my PC had Oracle 9iR2 installed with Administratiev Tools, where user machines had the same thing installed but using Runtime Installation. For some reason, my PC did not have 'bind date' etc. as an option in the workarounds, but user machines did have this workaround option. Strangely, although I did not have the option, my (ODBC) query was running as expected, but user queries were not.
When we set the workaround checkbox accordingly, the queries then run as expected (fast).
Once again,
Thanks

SAP query for SPRO table

HI experts, Im about to create a Sap query using SQVI tcode. I want to have listing of certain master data created in customizing(SPRO) like the catalogs and list of code groups and task codes in Service Notification. What is the best data source or the table should I use to capture this data? Or is this possible? If not, can you give me some ways how to have listing report for those information.

Hi,
Have you checked with t-code QS42 ?
Tables - QPGR, TQ15.
Regards,
Vivek

SAP QUERY using ASSHR and ASSOB tables

We currently have SAP query that reports on additional payments (Info type 0015). The user wants to report the cost center held on the cost assignment (Tables ASSOB and ASSHR).
The existing query uses infoset created using PNP logical database.
How do I add or join the ASSOB and ASSHR tables to Info type 0015 to report the cost center?
Thanks in advance
Shamshudin

Hi Sham
You may need to create custom fields in the infoset and create some code to pull out and display details from ASSHR and ASSOB corresponding to the ifnotype record.

How to override security for table access when using SAP Query?

We have a number of infosets which use table join between PA0001 and CATSDB table. To execute a query based on such a query you would need access to table auth group PA through S_TABU_DIS. This was earlier not a problem as SAP query was earlier used by support staff and not end users. We do not want to give S_TABU_DIS with to end users as this amounts to givin them access to all PA tables.
The generated code for the query checks for the condition
"%rtmode-no_authchk = space"
before going for the authorization check.
Thus, ideally the authorization check for an InfoSet can be skipped if we can pass X for this variable from the InfoSet definition. Is there a way to do this?
Would appreciste any inputs to help suppress the authorization check at this point. Thanks.....

>
Julius Bussche wrote:
> Perhaps you could replace it with a class of your own (transaction SE24)?
>
> I have not tried to do this; it was just a thought.
>
> Kind regards,
> Julius
unfortunately this does not work. SAP saw fit to 'hard-code' the implementation of the interface in RSAQEXCE:
(only parts of that abap displayed here).
170 data: iref type ref to if_query_tab_access_authority.
1107 *       FORM AUTHORITY_BEGIN
1112 form authority_begin using p_auth_classname type AQS_CLSNA.
1119   perform authority_init using p_auth_classname.
1120   call method iref->access_authority_begin.
well for my part (searching a solution for a query on LTAK, wanting L_LGNUM as an object) i'm out of ideas. i shall have to modify SAP-standard and disable the class and do my own coding in the info-set. no other possibility - i cannot allow S_TABU_DIS for group LA and even if i did, what help would it be - i would have to allow that to all companies in that client having WM - and that would be literally all - i need LGNUM here!

Sap Query Link Tables

Similar Messages

Maybe you are looking for