SAP R/3 SE38 code of ECC 6.0 to 4.6 C

I am working on an object in which I have to use the existing BDC's of ECC 6.0 system into R/3 4.6C system.
The BDC's are created by recording method for MEK1 transaction and there are nere about 13 BDC's recorded and combined into a single program in ECC 6.0 system. I have to use this program for 4.6C version to perform data upload.
Can anyone please tell me is there any better method available by which I can efficiently executet his 6.0 BDC's in 4.6c system in less efforts since I have to complete this task ASAP.

Jose, please check the following thread;
http://help.sap.com/saphelp_nw04/helpdata/en/79/c554d3b3dc11d5993800508b6b8b11/content.htm
where it talks about assignment between structure and single field... You can use direct assignement statement as in the example (before unicode enabling)

Similar Messages

SAP R/3 4.7 and ECC 5.0

Hello MM gurus!
i would like to know differences between SAP r/3 4.7 and ECC 5.0, and what makes the client to opt of the 4.7 or ECC 5.0.
Thanks in Advance gurus.
Regards,
Pieadad.

I am sorry for posting the question without searching properly. i got the answer for my question.
Regards,
Pieadad.

Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

Hi All,
My client is upgrading from SAP R/3 4.6C to ECC 6.0
We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
Thank You,
Ashok

My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns. ELM (External List Management), IDOC are some of the tools.
You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system. It also comes with batch tools to cleanse/dedup the entire systems name/address information. See Data Quality Management for SAP for further details.

Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Hi,
I am going to work Upgrade Sap R/3 4.6b to ECC 6.0
My role only Unicode enabling syntax check.
Can any one explain what are the work involved in
Custom Reports, Custom Transaction and Screens, BDC, Enhancements and Exits(BTE), Script ,Custom DDIC
Particularly need information Sapscript forms
Regards,
Ram

Hi Ram,
For Unicode, transaction UCCHECK is your best friend. It will even tell you how to fix the error.
All programs Most of the time you will just go and set the Unicode Checks Active program attribute, save, activate.
- If there are Unicode errors, fix them.
http://iorboaz.blogspot.com/2008/03/sap-abap-solution-instructions-for.html
SAPScript - Not sure if it even needs Unicode-enabling. We are still in the middle of an upgrade. Will add more later.
Custom DDIC In our case, the BASIS team handled the Unicode conversion of the DDIC objects.I think they ran a consistency check first, then run SPUMG or something.
Search the web for a Combined Upgrade and Unicode Conversion Guide.
Hope this helps.

ABAP differences of SAP R/3 4.6 and ECC 6.0

What are the ABAP differences of SAP R/3 4.6 and ECC 6.0?

Hi
Difference between version on functionalities you can find on the following link.
Give the source version (i.e. 4.6 C) and select the target version (i.e. ECC 6.0)
http://solutionbrowser.erp.sap.fmpmedia.com/
Please check this Release notes :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/content.htm
Check if this is helpfull
Short Difference between R/3 4.7, ECC5 & ECC6 !!!!!
1. SAP NetWeaver is SAP's technology platform. It has all of SAP's
technology in it. It is used to build and run SAP Applications and customer
applications (Application server, data warehouse, portal, coding, messaging,
etc). You can find more information on the SAP NetWeaver page on the SAP
Service Marketplace (http://service.sap.com/netweaver). Of course they is
also in on the SAP NetWeaver page in SDN.
2. ABAP is part of SAP NetWeaver. BW is part of SAP NetWeaver (as of
the 3.5release).
3. Prior to SAP NetWeaver, BW was a seperate product. It is shipped as part
of SAP NetWeaver since the SAP NetWeaver '04 release (SAP NetWeaver BI 3.5).
4. SAP ECC is part of the SAP ERP application (actually it is the minimal
installation of SAP ERP). SAP ERP runs on SAP NetWeaver. So when you get SAP
ERP you get SAP NetWeaver.
- SAP ECC 5.0 is part of SAP ERP 2004 [which runs on SAP NetWeaver '04]
- SAP ECC 6.0 is part of SAP ERP 6.0 (2005) [which runs on SAP
NetWeaver 7.0(2004s)]
5. SAP NetWeaver is delivered with SAP ERP so ABAP and the functional
modules are include in SAP ERP.
6. With SAP ERP (SAP ECC) you have a choice of activating BI within the SAP
ERP system or deploying in a seperate system. This is information is in the
SAP ERP master guides which can be found at
http://service.sap.com/instguides.
For SAP ERP 6.0 (ECC 6.0) it will the SAP NetWeaver 7.0 version of BI.
Also check
/thread/170347 [original link is broken]
The only difference between ECC5 and ECC6 is that additional components like mySAPCRM, mySAPPLM, mySAPSCM, mySAPSRM are added in ECC6.0. HR was already a part of ECC5.0.
http://abdurohman.wordpress.com/2007/06/29/whats-new-in-ecc5-and-ecc6-ecc7/
Reward if usefull

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

SAP documentation for t.code F.05

Hi All,
could anyone paste here the SAP documentation for t.code F.05 (Foreign currency valuation) in 4.7 release?
Thanks a lot
G.

Hi,
the documentation is available in help.sap.com:
[Foreign Currency Valuation|http://help.sap.com/saphelp_470/helpdata/en/96/8b3c2d43ce11d189ee0000e81ddfac/frameset.htm]
(choose Foreign Currency Valuation in the left side of the screen)

T-codes in ECC 6.0

Hi all,
Can anyone please send me a list of new transaction codes in ECC 6.0? particularly for HR module?
Thanks in advance.

Hi,
Refer to the table prgn_corr2 in se16. Also refer to the attached note # 991377 with this table.
Here you can find the list of changed transactions from R/3 3.0 release onwards.
Hope this helps.
Ashish
PS: Reward Points if useful.

Tax Code from ECC Contract or Info Record not picking in SRM7.0 SC

Hi Experts,
We are configuring SRM7.0 with ECC6 (Ehp4) having Classic Scenario.
In SRM Tax setting, we set as u201CTax calculation in backend systemu201D, we created and mapped Tax code with ECC and it is working fine.
In our case, Tax Rate varies as per Mat. Code & Country, irrelevant to Supplier.
Tax code will be maintained in the ECC Contract /Info Record & we are going to use it as a SoS.
However, while creating Shopping Cart, we must have to assign the Tax code at item level. If users makes any mistake and enter the different tax code, system does not validate it and create the classic PO with this tax code, which is different than maintained in ECC Contract /Info Record, which will be totally wrong and will create mess !
In tax code Config setting, we have option to default the Tax code, but it is on Country and Product Category basis .
Can someone confirm /suggest me , whether anyhow can we pull the Tax code from the selected SoS i.e. ECC Contract /Info Record, by using some BADi?
Thanks
NAP

Hi Experts ,
Any news on this please ?
Regards
NAP

SAP Upgrade from 4.7 to ECC 6.0 connected to BW 7.0 Best Practices

We are upgrading SAP R/3 4.7 to ECC 6.0. We have been running live in a BW 7.0 environment. We have done some enhancements for 2LIS_11_VAITM - Sales Document Item Data and 2LIS_13_VDITM - Billing Document Item Data datasources. We currently have a test instance that has been upgraded to ECC6.0.
What are the best business practices for testing BW to insure data transfer and enhancements are working correctly?
Eg. Should we connect the ECC6 instance to BWD and test there OR upgrade R/3 TST that is connected BWD and test there OR Upgrade QAS and test in BWQ.
Thanks in advance . . .
Edited by: RWC on May 4, 2011 6:26 PM

Hi RWC,
the plug-in will change slightly, you may notice differences in the screens of RSA2 and others after the upgrade.
Regarding best practices: In a recent upgrade our project team decided to create a parallel landscape with a new, additional Dev and QA on the R/3 side.
We connected these new systems to a BW Sandbox and the BW QA.
We identified all datasources, transfer rules and infopackages in use in production and recorded them with related objects onto transports in BW Dev. Before the import into BW Sandbox and BW QA we adjusted the system name conversion table to convert from old R/3 Dev to new R/3 Dev in order set up all the required connections for testing with the upgraded R/3 systems.
After the go LIVE of the upgrade we renamed the old R/3 Dev system in BW Dev and ran BDLS to convert everything (speak to your Basis team). That way we made sure not to lose any Development and we got rid of the old R/3 Dev system.
Take a look at this post for issues we encountered during this project and test everything you load in production.
Re: Impact on BI 7.0 due to ECC 5.0 to ECC 6.0 Upgrade
Best,
Ralf

Cross company subcontrating in sap with same company code

Dear Sir
we have an scinario of cross company subcontrating in sap with same company code , take an example my plat is 1003 and another is 1019 with same company code, so is it possible to do subcontracting ? i will process doccoumntation like j1if01
which i raise with vendor also.
plz send me procedure
regards''
sumit

Yes,you can do subcontracting between plants of same company code.
You need to to treat respective plants as vendors.
SAP process may be
1. Create a subcon p.o (sending plant as vendor)
2. Issue material using MB1B
3. Raise challan using J1IF01 if it is excisable or else print material document(step-2) as delivery challan for reference.
4. Receiving plant will raise sales order based on p.o
5. GR material from issuing plant - MIGO
6. Process material
7. Do Delivery / PGI from receiving plant
8. Do billing or proforma invoice
9. Receive processed material based on p.o
10. Challan reconcillation(not needed if material is non excisable)
11. Invoice for subcontracting work(optional)

Best Practices for converting SAP HR data (4.7 to ECC)

Hello Experts ...
We are going from 4.6 to ECC ... no upgrade ..it will be a new implementation ...
I am looking for best practices to convert SAP HR data from one sap instance(4.6) to another(ECC) ...
I am not sure if direct input or LSMW or any other method/tool is the best way ...
Will really appreciate and award point if I can get good advise or documentation ...
Let me know if my question is not clear enough.
Thanks,

Hi
You can check SAP Marketplace and there follow the download link. You will require a SAP Marketplace login to download the Best Practices. Fortunately Best practices for ECC 5.00 and 6.00 are available there but they are country specific versions. I know HCM for US is available there.
Reward points, if helpful.
Regards
Waz

How to create "valuation group code" in ECC system

Hi,
How to create" valuation group code" in ecc system and what is the path to create valuation grp code
Thanks&regards
kishore kumar

Use the following IMG path.
MM -> Valuation and Account Assignment -> Account Determination -> Account Determination without wizard -> Group together valuation areas (T Code OMWD). The Val.Grpg Code in this customizing is a freely definable 4-character code. You can then use this as valuation modifier in MM-FI account determination (OBYC).
Assign pts. if this answers your question!

DB2SET DB2WORKLOAD=SAP Fails with Return Code 238

Not sure which forum to post this, hopefully this is the right one. I am in the middle of setting up a sandbox for CRM and during the install, updating the database registry, the install fails with the following error;
db2set DB2WORKLOAD=SAP finished with return code 238.
OS AIX PPC64 I think the version is 5.3
DB2 9 FP5
I can't seem to find anything by google, but I am sure this is just a simple fix.

Hi All,
The SAP installation stopped with following error ...
DB2SET DB2WORKLOAD=SAP Fails with Return Code 227
Please help me in solving this issue .....
Regards,
Kumar Kadali

How to Materials has to be extended to new company code from ecc to crm

Hi ,
Please guide me how to Materials has to be extended to new company code from ecc to crm , step by step.
How to assign the pricing procedure from ecc to crm , step by step.
How to maintain the pricing conditions in crm , step by step.
Your answers will be appreciated in advance.
Thanks
Mohmus

Please use select all button in the top of the screen and click on copy button, here you have to change the company code.
That's it.
Rgds
Murali. N

SAP R/3 SE38 code of ECC 6.0 to 4.6 C

Similar Messages

Maybe you are looking for