Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Hi,
I am going to work Upgrade Sap R/3 4.6b to ECC 6.0
My role only Unicode enabling syntax check.
Can any one explain what are the work involved in
Custom Reports, Custom Transaction and Screens, BDC, Enhancements and Exits(BTE), Script ,Custom DDIC
Particularly need information Sapscript forms
Regards,
Ram

Hi Ram,
For Unicode, transaction UCCHECK is your best friend. It will even tell you how to fix the error.
All programs Most of the time you will just go and set the Unicode Checks Active program attribute, save, activate.
- If there are Unicode errors, fix them.
http://iorboaz.blogspot.com/2008/03/sap-abap-solution-instructions-for.html
SAPScript - Not sure if it even needs Unicode-enabling. We are still in the middle of an upgrade. Will add more later.
Custom DDIC In our case, the BASIS team handled the Unicode conversion of the DDIC objects.I think they ran a consistency check first, then run SPUMG or something.
Search the web for a Combined Upgrade and Unicode Conversion Guide.
Hope this helps.

Similar Messages

Upgrading SAP ESS and MSS after HR upgrade in ECC 6.0

Hello
I am new to SAP netweaver.
Our landscape has an ECC 6.0 system integrated with EP 7.0.
We recently upgraded our SAP HR from 600(SP 48) to 600(SP61) and EA HR component from 603(SP 22) to 603( SP 35).
After the upgrade we came to know that the portal users are facing some issues with Etime application on portal, i did a bit of searching and found that we have to upgrade SAP ESS, MSS and ERP5COM components. (http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES)
My questions are:
1) Can we directly apply SP's for ESS, MSS and other components as i cannot find any prerequisites required to be met before they have to applied?
2)If we have ESS SP 04 and the required version is ESS SP07, can we directly apply SP 07 or we have to first apply in a sequence SP05, SP06 and then move to SP07?
Thanks a lot!
Varun

Hello,
1) If a developer modified the ESS/MSS package, you need to ask the developer before you apply the patches. In this case, you find the "local version is modified" text in the corresponding package.
2) Java Patches are cumulative, which means that higher Patch contains all corrections of lower Patches.([SAP Note 1249886|https://service.sap.com/sap/support/notes/1249886])
Laszlo

Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.

Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating

Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and      51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit     =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia

Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia

Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

Hi All,
My client is upgrading from SAP R/3 4.6C to ECC 6.0
We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
Thank You,
Ashok

My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns. ELM (External List Management), IDOC are some of the tools.
You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system. It also comes with batch tools to cleanse/dedup the entire systems name/address information. See Data Quality Management for SAP for further details.

Upgrade SAP ECC 6.0 with SPS 12 to EHP4

Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!

Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday

Upgrading SAP ECC 5.0 to ECC6 phase GETSYNC_PREUP_FINI_D

I'm in process of the Upgrading SAP ECC 5.0 to ECC6 And, now it is in upgrade phase GETSYNC_PREUP_FINI_D. But, phase in GETSYNC_PREUP_FINI_D the Upgrade already runs to 24 hours.
============================================
The following START modes are available:
- Repeat phase GETSYNC_PREUP_FINI_D to continue
   the upgrade at the point it stopped.
- Initialize phase GETSYNC_PREUP_FINI_D to restart
   this phase from the beginning.
- Initialize and run another upgrade phase
   (caution, refer to your installation guide).
- Exit this program.
> repeat
>> 2008/10/22 11:49:04 UPGRADE/SWITCH: START OF PHASE GETSYNC_PREUP_FINI_D
The parallel running J2EE upgrade needs some more time...
Please be patient...
===============================================
Database: MSSQL2005
What could be the problem. I can skip it and go to the next stage???
Please help me out solution.?
Regards
Marcelo P. Silva

It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus

Does anybody know benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?

An upgrade of ERP SAP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10 is being planned in the company I work for. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?
Regards, Alejandro

Hi _Miguel
I am going from ECC 6.0 to ECC 6.06. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version 6.0 to 6.06
regards, Alejandro

Upgrade from R/3 4.6C to ECC 6.00 : languages

Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French       for component EA-APPL
- French       for component EA-DFPS
- French       for component EA-FINSERV
- French       for component EA-GLTRADE
- French       for component EA-HR
- French       for component EA-IPPE
- French       for component EA-PS
- French       for component EA-RETAIL
- French       for component ECC-DIMP
- French       for component ERECRUIT
- French       for component FI-CA
- French       for component FI-CAX
- French       for component FINBASIS
- French       for component INSURANCE
- French       for component IS-CWM
- French       for component IS-H
- French       for component IS-M
- French       for component IS-OIL
- French       for component IS-PS-CA
- French       for component IS-UT
- French       for component LSOFE
- French       for component PI_BASIS
- French       for component SAP_ABA
- French       for component SAP_AP
- French       for component SAP_APPL
- French       for component SAP_BASIS
- French       for component SAP_BW
- French       for component SAP_HR
- French       for component SEM-BW
- French       for component ST-PI
- Dutch        for component EA-APPL
- Dutch        for component EA-DFPS
- Dutch        for component EA-FINSERV
- Dutch        for component EA-GLTRADE
- Dutch        for component EA-HR
- Dutch        for component EA-IPPE
- Dutch        for component EA-PS
- Dutch        for component EA-RETAIL
- Dutch        for component ECC-DIMP
- Dutch        for component ERECRUIT
- Dutch        for component FI-CA
- Dutch        for component FI-CAX
- Dutch        for component FINBASIS
- Dutch        for component INSURANCE
- Dutch        for component IS-CWM
- Dutch        for component IS-H
- Dutch        for component IS-M
- Dutch        for component IS-OIL
- Dutch        for component IS-PS-CA
- Dutch        for component IS-UT
- Dutch        for component LSOFE
- Dutch        for component PI_BASIS
- Dutch        for component SAP_ABA
- Dutch        for component SAP_AP
- Dutch        for component SAP_APPL
- Dutch        for component SAP_BASIS
- Dutch        for component SAP_BW
- Dutch        for component SAP_HR
- Dutch        for component SEM-BW
- Dutch        for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancel

Hi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Upgrade from R/3 4.7 to ECC 5.0

Hello Everyone
This is my very first post on SDN. I am going to do an upgrade from R/3 4.7 to ECC 5.0. Can anyone please tell me how do I start and procede, this will be my very first upgrade and I definitely need help!!!. I will be really thankful if anyone can give me any suggestions as to how to procede with the planning and then the actual upgrade. What documentation from the service.sap.com should I follow???........PLS help!!!

Dear Mir,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Major considerations for the Upgrade from R/3 4.6c to ECC on HR Part.

Hi Experts,
We are doing an upgrade from SAP R/3 4.6c to ECC 6.0
What would be the impact on Personnel Administration and Organizational Management submodules of HR? and the major worries abt ESS and MSS. Currently my client is using ESS and MSS in portal that can retrieve the data from the Backend 4.6c system. while doing upgrade is there any prerequisites i need to met or is there any post upgrade activities for HR or is there Any dependencies?
Because there is a complete architecutre difference for ESS and MSS in both versions, so how can i manage the things without data inconsistencies?
Responses would be heighly appreciated.
Regards,
Srini

Hi Experts,
We are doing an upgrade from SAP R/3 4.6c to ECC 6.0
What would be the impact on Personnel Administration and Organizational Management submodules of HR? and the major worries abt ESS and MSS. Currently my client is using ESS and MSS in portal that can retrieve the data from the Backend 4.6c system. while doing upgrade is there any prerequisites i need to met or is there any post upgrade activities for HR or is there Any dependencies?
Because there is a complete architecutre difference for ESS and MSS in both versions, so how can i manage the things without data inconsistencies?
Responses would be heighly appreciated.
Regards,
Srini

Best Practices for converting SAP HR data (4.7 to ECC)

Hello Experts ...
We are going from 4.6 to ECC ... no upgrade ..it will be a new implementation ...
I am looking for best practices to convert SAP HR data from one sap instance(4.6) to another(ECC) ...
I am not sure if direct input or LSMW or any other method/tool is the best way ...
Will really appreciate and award point if I can get good advise or documentation ...
Let me know if my question is not clear enough.
Thanks,

Hi
You can check SAP Marketplace and there follow the download link. You will require a SAP Marketplace login to download the Best Practices. Fortunately Best practices for ECC 5.00 and 6.00 are available there but they are country specific versions. I know HCM for US is available there.
Reward points, if helpful.
Regards
Waz

Upgrade 4.6C to ECC 6.0; Unicode - non-Unicode -- Unicode

Hi,
My client has a R/3 4.6c UNICODE, he wants to upgrade to ECC6.0 UNICODE.
According to a SAP document, to upgrade, I upgrade directly to ECC 6.0 NON_UNICODE then convert the system to ECC 6.0 UNICODE.
I'm wonder why Unicode -> non-Unicode --> Unicode.
Regards,
Toan Do

"4.6C is not a unicode system ,ecc6.0 is an unicode system."
Actually, ECC 6.0 only has to be unicode if you are a new installation. If you are upgrading from a non-unicode system, you can upgrade to a non-unicode ECC 6.0 system, this is fully supported by SAP.
However, it is recommended that you perform the upgrade and unicode conversion at the same time. SAP is going to force us to unicod some day anyway.
We have just completed a technical upgrade from 4.7 to ECC 6 non-unicode, and now we are looking at a unicode conversion project. It would have added time to the original upgrade project, but it would have been worth it.
T

Upgradation SAP system

Pl give the procedure for
1) upgrade SAP system from ORA 9/ECC 5.0 to ORA 10g/ECC 6.0
2) full ECC6.0 installation (start from RAW OS; including swap/paging, env variables etc....)
Pl do the needful

Well if you want to do it the easy way then you could pay a consultant and watch how he does it. In the other hand if you want to learn and can´t contract a consultant then you could start looking for the SAP upgrade guide and all related documentation at service.sap.com/upgrade there you will find lots of helpful information and you will learn how to face that project.
For full installation then also look for the guide here service.sap.com/instguides and carefully follow the instructions.

Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Similar Messages

Maybe you are looking for