SAP report (MB51) prints with slash overtype on qty and cost fields

We recently installed a new printer, and it is printing slashes through the fields. It is not the actual slash character, I think, because the angle appears to be steeper. Some lines are croshatched, with the slash and backslash overstriking the same area.
It does this on the quantity, and the Amount LC fields.
Any ideas?
Thanks

Hi Michael,
did you manage to solve this problem? It happens to all fields that has a color. In case of forwardslash green and when it is red it is croshatched. Printing in color it prints correctly.
Thanks
Regards

Similar Messages

SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
"The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
"GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

Hi,
Search for routine FORM SORTFELDER_ERMITTELN
in SAPF150D.
Put a breakpoint in statement
ASSIGN (T047F-FELDN) TO <H1>.
in above routine and debug to the point where error is occuring.
Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
In that case, simply change the T047F-LENGT field accordingly in change mode.
Cheers,
Vikram
Edited by: Vikram Jalali on May 27, 2008 5:56 PM

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

Does you friend use any accented letters in the descriptions? That might cause it but I don't know for sure.
Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

MRP is conflicting with Sales order requirement Qty and date

Hi experts,
We have below scenario:
Material has the stock 100. It has reorder point 3 and MRP type V2 (Automatic reorder point with external requirements) and planned delivery time 10 days.
MRP run creates purchase requisition whenever the stock falls below reorder level or/and based on customer orders requirements.
We created first sales order for Qty 80 and delivery date 03/01/2012. Qty 80 is confirmed against this sales order.
We created second sales order for Qty 50 and delivery date 01/31/2012. Now remaining Qty 20 is confirmed against this order. So we have requirements of 30 Qty for this second order.
When we run MRP, it supposes to create Purchase requisition for Qty 33 (30 + 3) including reorder point (3 Qty). As the delivery date for this order is 01/31/2012 and requirement Qty is 30, and planned delivery time is10 days, MRP run should create purchase requisition. But it is not creating.
If I change the planned delivery time to 30 days, it is creating purchase requisition. It is considering sales order delivery date of First order (delivery date: 03/01/2012), but not for second order (delivery date: 01/31/2012).
So MRP is conflicting with Sales order requirement Qty and date.
Appreciate your help in this regard to resolve the issue
Thanks,
Srini

Hi,
We are using manual reorder point planning with external requirements (V1)
Thanks,
Srini

Problem in sap script check printing with EPSON FX890 printer

Hi
I am trying to print a check through F-58 using a script.
We have a new EPSON FX890 dot matrix printer, But when I fire a check the the formatting of the check is not proper. The alignment is never the same as given in the SAP script. this could a problem with the printer set up and configuration in SAP. Could anybody please give me some inputs on what needs to be done. its Urgent. Can anybody give me what needs to be done and also guide me with Print control commands in SAP scripts
Thanks,

Hi,
Here is some steps you should follow for scripts printout.
1. Validate the drivers used in SAP (Tcode SPAD)
2. Are you printing through a print server or directly to the printer
3. If it is througha print server like windows, you should validate to have the right driver installed for that printer.
4. Validate on the printer the default setting. If the script doesn't sent the proper font or setup, it will print using the last setup sent to the printer.
So if somebody used work and print a specific document with different setting, some time the setting stays for the SAP report.
To validate the setup of the printer, just turn off and on the printer before sending the SAP form. That should help to see if the setup has been changed by another program.
I hope those simple steps will help to solve your problem.
Reward if helpfull...
Cheers,
Rakesh.

How to submit a report to printer with specified language?

hi all,
It's very strange that there's no parameter which can specify language when submit a report to printer, then how can I print Chinese when logon in English? I can display Chinese correctly in screen and spool by set the SY-LANGU = '1', but it doesn't work with printer. Furthermore, the customer have lots of Chinese users but they won't install the Chinese language package.

Hi,
In your ABAP program use "set locale language 'X' country 'XX' " stmt to set the language.
Svetlin

How best to use adobe photoshop on a direct ink injecter garment printer with an Epson pinter head and nozzel sprey

just starting t-shirt printing business but having problem pairing printer to PC using adobe Photoshop 13 elements software

You will need to give more information.
Please define "having problem pairing printer to PC." -- Tell the whole story, what you are trying to do, and what happens instead ...
This sounds so far like it's a printer problem, not a Photoshop problem ... ? Have you tried printing with other applications? Does that work?
Have you checked your cables? Print drivers? Read the printer manual, etc. -- ?

I'm trying to report a problem with a order i place and paid for but didn't recieve how do I do it?

I'm having troble reporting a problem with something I ordered from the itunes Store. Please help?

You can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Printing with OSX 10.5.2 and Lexmark 5470 Work around

I just upgraded to Leopard. Like many people have had problems printing with my existing Lexmark printer. Upgraded to the latest print driver and now able to print, but, pauses. When brining up Que. am able to continue print process, but puts many pages into small space at one place on the paper. Tried removing driver and printer info and then reinstalling all. Still same problem. Have not found any solution to the direct problem and am still searching, however, I have found a WORK AROUND. If you used the print dialog box and select sending to PDF first and then print from Preview everything works just fine.
So what gives? The doc I was trying to print was from Firefox from the internet. So maybe it has something to do with the App being used. I did not try with Safari, but I will try next. If it works from Safari correctly then I can maybe assume that it is a problem from third party app software, since it printed fine from Apple's app Preview as a PDF.
Just a thought. Any other thoughts, please submit. I too am looking for answers.

appleray wrote:
Upgraded to the latest print driver and now able to print, but, pauses.
The compatibility page (http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596666691854_1177082303en,00.html) says that the x5470 is bundled with the 10.5 DVD so you should reinstall using that driver.
It's also a good idea to try with Safari. The fact that you were able to print with other apps seems to indicate that problem is with Firefox. What version are you using?

Problems printing with HP laser jet 5M and Snow Leopard

Hello,
Since In installed Snow Leopard on my mac I can no longer print with my HP laser jet 5M.
I know this is because Appletalk is no longer supported, and that I should use the laser jet as IP printer. However, I couldn't figure out how to assign an IP address to the printer. It seems I can't do this by the config menus of the printer. I read somwhere it is possible to do this by terminal (telnet) but I am not familiar with unix.
Can anybody help me to solve this problem?
many thanks
Marcello

This should get you started
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

List of materials with total PR, PO qty, and stock

Dear All,
Is there any std report to check the list of materials along with total PR qty, PO qty and Current stock.
This is to check, what is the total requirement of the materials and whether Purchase team has raised the PO or not ?
Please advise.
Regards
Vinoth.

Hi,
MD04 gives us the details of individual part no.
But, we would like to see similar details in the form of list of materials, with cumulative demand, cumulative OPEN PR Qty, Open PO Qty and Stock.
Please help.
Regards,
Vinoth.

PO reporting that can capture PO number, PO value and cost center

Dear SAP expert and gurus,
Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
Kindly advise.
Thank you
Regards
Leonard Tan

ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
Thank you
Regards
Leonard Tan

Audio drift with HDV (25fps 48k) footage and split field recorder audio (48k)

Split audio and audio from captured footage start synced but split sound drifts increasinly over time.
I've tried with 24bit (audio) as it was captured on field recorder and a 16bit converted file - same issue.
Weirdly, when I time compress split audio (100.4%) - waveforms visually line up but when rendered or playedback, drift is STILL THERE ie - even if I play back split audio only, I'm hearing playback drifting/delayed by a second or two towards the end of the hour long shot. So audio corresponding to peaks in waveform happens (increasingly) well after playhead hit and passes the peak. (I hope that makes sense)
Any suggestions? I've already missed a deadline because of this issue. Thanks in advance.
VIDEO
***** Analyzed File Results *****
*** General Parameters ***
- Name: PRISM talk OOC Melb.mpeg
- Container: Mpeg Transport Stream
- Size: 12.133 GB
- Duration: 1h 2mn
- Bitrate: 26.1 Mbps
*** Video Track Parameters ***
- Format: MPEG-2 Video
- Bitrate: Max.: 25.0 Mbps / Average: 24.4 Mbps / Min.: Undefined
- Frame rate (fps): Max.: Undefined / Average: 25.000 / Min.: Undefined
- Encoding profile: Main@High 1440
- Image size: 1440*1080
- Pixel Aspect Ratio: Undefined
- Display Aspect Ratio: 16:9
- Interlacing: Progressive
*** First Audio Track Parameters ***
- Format: Mpeg-1 layer 2 (mp2)
- Bitrate: 384 Kbps
- Resolution: Undefined
- Rate: 48.0 KHz
- Channel(s): 2 (stereo)
- Position: Undefined
*** Miscellaneous ***
- Subtitle(s): No Subtitle
- Album: Undefined
- Performer: Undefined
- Genre: Undefined
- Encoded date: UTC 2012-10-14 12:41:03
- Album artist: Undefined
AUDIO
***** Analyzed File Results *****
*** General Parameters ***
- Name: 1004.WAV
- Container: Microsoft Wave
- Size: 2.309 GB
- Duration: 2h 13mn
- Bitrate: 2 304 Kbps
*** Video Track Parameters ***
- Format: No video track
- Bitrate:
- Frame rate (fps):
- Encoding profile:
- Image size:
- Pixel Aspect Ratio:
- Display Aspect Ratio:
- Interlacing:
*** First Audio Track Parameters ***
- Format: Uncompressed PCM
- Bitrate: 2 304 Kbps
- Resolution: 24 bits
- Rate: 48.0 KHz
- Channel(s): 2 (stereo)
- Position: Undefined
*** Miscellaneous ***
- Subtitle(s): No Subtitle
- Album: Undefined
- Performer: Undefined
- Genre: Undefined
- Encoded date: 2012:10:14 13:03:52
- Album artist: Undefined

Thanks but yes I did do that, and the waveforms visually align even when zoomed all the way in - from the original post:
"Weirdly, when I time compress split audio (100.4%) - waveforms visually line up but when rendered or playedback, drift is STILL THERE ie - even if I play back split audio only, I'm hearing playback drifting/delayed by a second or two towards the end of the hour long shot."
Literally, playhead passes over a peak then corresponding audio is heard dealyed, well after (and drift increases over time).
I can only surmise this is a bug with Premiere as I've done this process countless times without error in FCP. Not particularly happy with the lack of solution and time wasted on this.

Standard SAP Report for Vendors to dispaly Vendor No, Name and Balance

Hi Experts,
Can any one help me to display Vendor Report which contains Vendor No, Vendor Name and Vendor Balance from SAP Standard Reports (Not Customized Report). I have checked with all SAP Standard Reports, It seems that all SAP Standard Reports displays with only Vendor No not with Vendor Name.
Best Regards,
Chandra

Hi,
You can use the following report, actually it is a drill down report. You can drill down the report in the way you want.
S_ALR_87012079
Rgds
Murali. N

Problem printing with Reader 9.4.5 and 10

I recently upgraded to Windows 7. I have a Cannon Pixma iP4300 printer and have installed the Windows 7 driver that I downloaded manually from the Cannon website. The test page prints on this printer, as do Office files and images. When I print a PDF, a sheet feeds into the printer, one pass of the print heads is made, and no further progress occurs. I have allowed over 10 minutes to pass, but no further printing occurs. The document is shown as printing in the printer queue, and the Cannon printer status window also indicates that printing is in progress. No error messages are reported.
I have uninstalled and reinstalled (separately) 10 and 9.4.5 and still have the same problem. Any suggestions?

I do a lot of graphic design work which means I work with a lot of fonts, 4880 to be exact. Since 2005 I have found a number of fonts that simply quit working with Windows Vista vs XP 7 vs Vista, and even in Mac OS X from one build to another. It also happened with Software like Acrobat, Reader, TurboTax, Firefox, and Office.
It may just be that this particular font no longer meets compatibility standards for Reader X.

SAP report (MB51) prints with slash overtype on qty and cost fields

Similar Messages

Maybe you are looking for