SAP Script is not getting called for GI Output type WA03

Dear All,
I have designed one SAP script for goods issue output type WA03 for Tcode Migo.
I have assigned the form name in NACE. But the problem is it is not picking my form, It is giving some Express document error. I am not able to know how the transaction is picking up the form since it is not going to the standard program even though i have kept breakpoint there. Can anybody let me know how the print program (SAPM07DR)is getting called from MIGO.
print program name is SAPM07DR. Standard Script name is WASCHEIN.
Regards,
Ravindra Jain

HI Ravi,
Did you check the entry in NACE. I think you need to configure the Driver program and sap script there. just try to put a session break point and check why it is not picking.
Thanks,
Chidanand

Similar Messages

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

DidReceiveData not getting called for consuming a SOAP webservice

I am trying to access a webservice in iphone. didReceiveResponse connectionDidFinishLoading is getting called however didReceiveData is not getting called. I checked NSHTTPURLResponse allHeaderFields where Content-length is 0 and statusCode is 400. I am not getting why I am getting this HTTP status code. Can someone please help me in finding this error. Here is my code:
- (IBAction)buttonClickedid)sender {
NSString *soapMsg =
[NSString stringWithFormat:
@"<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
"<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xlmns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n"
"<soap:Body>\n"
"<GetAllCarsJson xmlns=\"http://cscserver2.carrollu.edu/tshah2/\">\n"
"</GetAllCarsJson>\n"
"</soap:Body>\n"
"</soap:Envelope>"];
//---print it to the Debugger Console for verification---
//NSLog(@"%@",soapMsg);
NSURL *url = [NSURL URLWithString:@"http://cscserver2.carrollu.edu/tshah2/CarService.asmx"];
NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url];
//---set the headers---
NSString *msgLength = [NSString stringWithFormat:@"%d",[soapMsg length]];
[req addValue:@"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"];
[req addValue:@"http://cscserver2.carrollu.edu/tshah2/GetAllCarsJson" forHTTPHeaderField:@"SOAPAction"];
[req addValue:msgLength forHTTPHeaderField:@"Content-Length"];
//---set the HTTP method and body---
[req setHTTPMethod:@"POST"];
[req setHTTPBody: [soapMsg dataUsingEncoding:NSUTF8StringEncoding]];
//[activityIndicator startAnimating];
conn = [[NSURLConnection alloc] initWithRequest:req delegate:self];
[conn start];
NSLog(@"Connection = %@", conn);
if (conn)
    //webData = [[NSMutableData data] ];
    webData = [[NSMutableData alloc] initWithCapacity:2048];
    //[[NSMutableData data] retainArguments];
- (void) connection NSURLConnection *) connection didReceiveResponse NSURLResponse *)response
    NSLog(@"soapMsg1: %d", [webData length]);
    //webData = [[NSMutableData alloc] initWith:
    [webData setLength:0];
- (void) connection NSURLConnection *) connection didReceiveData NSData *)data
    NSLog(@"DONE1111");
    [webData appendData:data];
    //NSLog(webData);
- (void) connection NSURLConnection *) connection didFailWithError NSError *)error
    NSLog(@"ConnectionFailed");
    //[webData release];
    //[connection release];
- (void) connectionDidFinishLoading NSURLConnection *) connection
    NSLog(@"DONE. Received Bytes: %d", [webData length]);
    NSString *theXML = [[NSString alloc] initWithBytes:[webData mutableBytes] length:             [webData length] encoding:NSUTF8StringEncoding];
    //shows the XML
    NSLog(theXML);
    //[theXML release];
    //[activityIndicator stopAnimating];
    //[connection release];
    connection = nil;
    webData =nil;

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy

Thank you in advance. I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5). We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program: Installation master sapinst
We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password. Can anyone point me in the right direction on what is wrong? If you need more info let me know.
Thanks,
Erik

@ Sven & Markus
Well I have checked all the logs and there are no errors. What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
Here it shows that it completed successfully but in the export directory there isn't data when there should be.
INFO 2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
> IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully has been completed successfully.
See here:
/dev/exportlv 119.25 119.23 1% 16 1% /export
Thanks,
Erik

Script does not get called

Hi there, I am trying to setup a quad view on my stage by
placing 4 sprites on the stage with the same 3D cast member. I then
apply a behaviour script that initalizes the 4 sprites in their
correct positions and sets up the 4 different camers as follows...
topView
perspView
sideView
frontView
... however, doing so, the script gets called only on the
first sprite and the other 3 sprites do not react with the
behaviour script. As a matter of fact, I also have a sendAllSprites
command inside the behaviour script and it does not send the
message to all of the sprites with that piticular behaviour script.
Is the reason why the behaviour script does not work on the other 3
sprites because I need a diferent 3d castmember for each
sprite?

Hello,
You don't need to place 4 sprites of the same W3D cast member
in the score.
1- Place a single occurence (sprite) of the W3D cast member
in the score
2- Create 4 cameras either in your 3D package or by code
using member.newCamera():
topView
perspView
sideView
frontView
3- Set the rect of the four cameras so they correspond to
each corner of the screen
4- Use sprite.addCamera() in order to add the four cameras to
the W3D sprite
That's all you need.
Best regards,
Karl Sigiscar.
http://www.chromelib.com

Inspection lot not getting create for 01 Insp type after Intransit

Hi Qm Gurus,
I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?

Hi ,
Please activate inspection type 08 stock transfer ..
If this inspection type is active then during stock transfer lot gets generated.
Also check QM active for this perticular movement in custamizing setting.
Regards
SANIL

EXIT_SAPLV01Z_013 for Batch master Update is not getting called for MSC1n

Hello,
I am facing the same issue I want to update a date 6 field while the user create a Batch thurogh MSC1n.
I am using the EXIT_SAPLV01Z_013 to update the same.
But This Exit is not called as there is a condition which fails while this exit is called thru FM VB_CREATE_BATCH.
the field NO_CFC_CALLS is set to "X" in Include LCHRGF02.
CALL FUNCTION 'VB_CREATE_BATCH'
EXPORTING
ymcha = akt_mchx
new_lgort = dfbatch-lgort
bypass_lock = 'X'
kzcla = ' '
xkcfc = ' '
no_check_of_qm_char = 'X'
no_change_document = ' '
check_external = space
check_customer = space
no_cfc_calls = 'X'.
Can you please help how do we resolve this issue i am using SAP 4.7.
Thanks
Solanki Ritesh

hello
Any suggestion do we have any OSS note for the same???
thanks
Solanki Ritesh

ActionEventListeners are not getting called for buttons within facets

Hi,
I see some wiered issue with ADF Facet Switcher. I have the following code in a JSF page fragment (.jsff) and it has got a mixture of some client side HTML elements like p, div , h2 etc for styling ..along with these ADF components.
<af:switcher facetName="#{backingBeanScope.NavigationBean.navigationNodeType}" id="facettype" rendered="true" defaultFacet="orphan">
<f:facet name="node">
<af:panelGroupLayout layout="vertical" id="pgnode" visible="true">
<af:forEach items="#{backingBeanScope.NavigationBean.currentNode.children}"
var="childNode">
<af:commandLink text="#{childNode.title}"
inlineStyle="font-weight:#{backingBeanScope.NavigationBean.currentNode.title eq childNode.title ? 'bold' : 'normal'};"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
partialSubmit="true"
visible="true"
id="cmdlinknode">
<af:setActionListener from="#{childNode}"
to="#{backingBeanScope.NavigationBean.currentNode}"/>
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
</af:forEach>
</af:panelGroupLayout>
</f:facet>
<f:facet name="leaf">
<af:panelGroupLayout layout="vertical" id="pgleaf" visible="true">
<af:forEach items="#{backingBeanScope.NavigationBean.parentNode.children}"
var="childNode">
<af:commandLink text="#{childNode.title}"
inlineStyle="font-weight:#{backingBeanScope.NavigationBean.currentNode.title eq childNode.title ? 'bold' : 'normal'};"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
id="cmdlinkleaf" visible="true"
partialSubmit="true">
<af:setActionListener from="#{childNode}"
to="#{backingBeanScope.NavigationBean.currentNode}"/>
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
</af:forEach>
</af:panelGroupLayout>
</f:facet>
<f:facet name="orphan">
<af:panelGroupLayout layout="vertical" id="pgorphan" visible="true">
<af:goLink destination="" text="Back to previous page" id="orphanlink"></af:goLink>
</af:panelGroupLayout>
</f:facet>
</af:switcher>
But interstingly the command link or button inside these switcher or facets doesnot invoke any actionlisteners or action ....Tried many things and wasted much time to actually figure out the issue is only for the command links or buttons placed in the switcher...If i place something after the switcher...
<af:commandLink text="#{'clickme'}"
inlineStyle="bold"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
id="cmdlinktest" visible="true"
partialSubmit="true">
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
Then the action listeners or actions are getting invoked properly....Can you please tell what is wrong with the above snippet? I am using Jdeveloper 11.1.1.4 tech stack.
Regards
Prasath.C
Edited by: Prasath C on 05-Aug-2011 03:08
Edited by: Prasath C on 05-Aug-2011 03:09
Edited by: Prasath C on 05-Aug-2011 03:12

perhaps the XML parser doesn't like the format of your output. Is it formatted XML? I would output unformatted XML (without newlines, tabs and spaces between elements, etc.) and try again.
Perhaps the character encoding used isn't liked by the XML parser. Are you providing any character encoding to begin with? (UTF-8 for example)
It is hard to tell what could be wrong from such an ambiguous error message. The best thing you can do is try a flash forum, or poke around with the stuff until something works. You could also try putting some logging in the servlet to at least know that it is being called by the flash application.

Quantity field not getting displayed for all document types

Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
Aravind

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Task in Lookup.USR_PROCESS_TRIGGERS not getting called

Hi,
We have created a process task adapter and copied this in Lookup.USR_PROCESS_TRIGGERS. This adapter works only when some change happens in User Form in a particular field (say First name).This adapter is not getting called for the users who are created through Bulk Upload. Although it is getting called when I am creating a user manually.
Regards,
Shubhra

This the issue with 11.1.1.5 version of OIM. It doesn't trigger on trusted recon. install BP02 for resolving this issue. We had resolved this by installing this patch
--nayan

Output type is not getting triggered for ship to party in shippment output

Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SS

Hi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

Bookmark method for a page is not getting called

Hi,
I am developing a simple ADF application which contains two jspx pages, in JDEVELOPER 11g (build JDEVADF_MAIN_GENERIC_080910.1420.5124).
I have a commandLink in Page1 which takes me to the Page2.I have a bookmark method for Page2, which gets called when I load the page.
When I access the Page2 directly,the corresponding bookmark method is getting called.But when I navigates it through commandLink provided in Page1,the bookmark method is not getting called.
Page1.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:commandLink text="Go to Page2" action="page2" />
</af:form>
</af:document>
</f:view>
</jsp:root>
Page2.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:bib="http://xmlns.oracle.com/dss/adf/faces">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:outputText value="This is Page2"/>
</af:form>
</af:document>
</f:view>
</jsp:root>
adfc-config.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<view id="page1">
<page>/page1.jspx</page>
</view>
<view id="page2">
<page>/page2.jspx</page>
<bookmark>
<method>#{mBean.bookMarkMethod}</method>
</bookmark>
</view>
<control-flow-rule>
<from-activity-id>page1</from-activity-id>
<control-flow-case>
<from-outcome>page2</from-outcome>
<to-activity-id>page2</to-activity-id>
</control-flow-case>
</control-flow-rule>
<managed-bean>
<managed-bean-name>mBean</managed-bean-name>
<managed-bean-class>view.ManagedBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</adfc-config>
ManagedBean.java:
public class ManagedBean {
public ManagedBean() {
super();
public void bookMarkMethod() {
System.out.println("Inside bookmark method");
Please look into this...........

Hi Frank,
I need to provide the af:commandLink inside af:table component and the values which I pass to page2 depends on the row I select at runtime.
so,I am trying to use ad:setActionListener inside af:commandLink.
If I use FacesContext.getCurrentInstance.getExternalContext.redirect() inside the actionListener of af:commandLink, I need to extract all the required values in the actionListener.
Isn't there any way so that, I can pass the values using af:setActionListener inside af:commandLink and a method ( which will initialise the managed bean) will be called when page2 loads ???
Regards,
Lokesh.

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

SAP Script is not getting called for GI Output type WA03

Similar Messages

Maybe you are looking for