EXIT_SAPLV01Z_013 for Batch master Update is not getting called for MSC1n

Hello,
I am facing the same issue I want to update a date 6 field while the user create a Batch thurogh MSC1n.
I am using the EXIT_SAPLV01Z_013 to update the same.
But This Exit is not called as there is a condition which fails while this exit is called thru FM VB_CREATE_BATCH.
the field NO_CFC_CALLS is set to "X" in Include LCHRGF02.
CALL FUNCTION 'VB_CREATE_BATCH'
EXPORTING
ymcha = akt_mchx
new_lgort = dfbatch-lgort
bypass_lock = 'X'
kzcla = ' '
xkcfc = ' '
no_check_of_qm_char = 'X'
no_change_document = ' '
check_external = space
check_customer = space
no_cfc_calls = 'X'.
Can you please help how do we resolve this issue i am using SAP 4.7.
Thanks
Solanki Ritesh

hello
Any suggestion do we have any OSS note for the same???
thanks
Solanki Ritesh

Similar Messages

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

DidReceiveData not getting called for consuming a SOAP webservice

I am trying to access a webservice in iphone. didReceiveResponse connectionDidFinishLoading is getting called however didReceiveData is not getting called. I checked NSHTTPURLResponse allHeaderFields where Content-length is 0 and statusCode is 400. I am not getting why I am getting this HTTP status code. Can someone please help me in finding this error. Here is my code:
- (IBAction)buttonClickedid)sender {
NSString *soapMsg =
[NSString stringWithFormat:
@"<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
"<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xlmns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n"
"<soap:Body>\n"
"<GetAllCarsJson xmlns=\"http://cscserver2.carrollu.edu/tshah2/\">\n"
"</GetAllCarsJson>\n"
"</soap:Body>\n"
"</soap:Envelope>"];
//---print it to the Debugger Console for verification---
//NSLog(@"%@",soapMsg);
NSURL *url = [NSURL URLWithString:@"http://cscserver2.carrollu.edu/tshah2/CarService.asmx"];
NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url];
//---set the headers---
NSString *msgLength = [NSString stringWithFormat:@"%d",[soapMsg length]];
[req addValue:@"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"];
[req addValue:@"http://cscserver2.carrollu.edu/tshah2/GetAllCarsJson" forHTTPHeaderField:@"SOAPAction"];
[req addValue:msgLength forHTTPHeaderField:@"Content-Length"];
//---set the HTTP method and body---
[req setHTTPMethod:@"POST"];
[req setHTTPBody: [soapMsg dataUsingEncoding:NSUTF8StringEncoding]];
//[activityIndicator startAnimating];
conn = [[NSURLConnection alloc] initWithRequest:req delegate:self];
[conn start];
NSLog(@"Connection = %@", conn);
if (conn)
    //webData = [[NSMutableData data] ];
    webData = [[NSMutableData alloc] initWithCapacity:2048];
    //[[NSMutableData data] retainArguments];
- (void) connection NSURLConnection *) connection didReceiveResponse NSURLResponse *)response
    NSLog(@"soapMsg1: %d", [webData length]);
    //webData = [[NSMutableData alloc] initWith:
    [webData setLength:0];
- (void) connection NSURLConnection *) connection didReceiveData NSData *)data
    NSLog(@"DONE1111");
    [webData appendData:data];
    //NSLog(webData);
- (void) connection NSURLConnection *) connection didFailWithError NSError *)error
    NSLog(@"ConnectionFailed");
    //[webData release];
    //[connection release];
- (void) connectionDidFinishLoading NSURLConnection *) connection
    NSLog(@"DONE. Received Bytes: %d", [webData length]);
    NSString *theXML = [[NSString alloc] initWithBytes:[webData mutableBytes] length:             [webData length] encoding:NSUTF8StringEncoding];
    //shows the XML
    NSLog(theXML);
    //[theXML release];
    //[activityIndicator stopAnimating];
    //[connection release];
    connection = nil;
    webData =nil;

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

SAP Script is not getting called for GI Output type WA03

Dear All,
I have designed one SAP script for goods issue output type WA03 for Tcode Migo.
I have assigned the form name in NACE. But the problem is it is not picking my form, It is giving some Express document error. I am not able to know how the transaction is picking up the form since it is not going to the standard program even though i have kept breakpoint there. Can anybody let me know how the print program (SAPM07DR)is getting called from MIGO.
print program name is SAPM07DR. Standard Script name is WASCHEIN.
Regards,
Ravindra Jain

HI Ravi,
Did you check the entry in NACE. I think you need to configure the Driver program and sap script there. just try to put a session break point and check why it is not picking.
Thanks,
Chidanand

ACE for CRM 2007-AFO method not getting called!

Hi Experts,
I am trying to implement ACE for CRM 2007.The only issue/concern is the Actor From Object(AFO) method is not being called even once.
I was assuming that every method is called at the time of right's activation.
I placed breakpoints in all the 5 methods, but only method Actor from User(AFU) and Object by Filter(OBF) were being called.
Can anybody suggest at what point the method-Get Actors From Objects is called?
Thanks and Regards,
Rohit

Hi Rohit,
the method Actors-For-Object isnt used any more by SAP. Always use method Actors-For-Objects.
This method should be called, when objects pass the method "object_by_filter" (runtime --> check_object..., activation --> get_object..).
Perhaps there are no objects passing your OBF-methods? Can you check the output of your method?
Regards,
Mario

ActionEventListeners are not getting called for buttons within facets

Hi,
I see some wiered issue with ADF Facet Switcher. I have the following code in a JSF page fragment (.jsff) and it has got a mixture of some client side HTML elements like p, div , h2 etc for styling ..along with these ADF components.
<af:switcher facetName="#{backingBeanScope.NavigationBean.navigationNodeType}" id="facettype" rendered="true" defaultFacet="orphan">
<f:facet name="node">
<af:panelGroupLayout layout="vertical" id="pgnode" visible="true">
<af:forEach items="#{backingBeanScope.NavigationBean.currentNode.children}"
var="childNode">
<af:commandLink text="#{childNode.title}"
inlineStyle="font-weight:#{backingBeanScope.NavigationBean.currentNode.title eq childNode.title ? 'bold' : 'normal'};"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
partialSubmit="true"
visible="true"
id="cmdlinknode">
<af:setActionListener from="#{childNode}"
to="#{backingBeanScope.NavigationBean.currentNode}"/>
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
</af:forEach>
</af:panelGroupLayout>
</f:facet>
<f:facet name="leaf">
<af:panelGroupLayout layout="vertical" id="pgleaf" visible="true">
<af:forEach items="#{backingBeanScope.NavigationBean.parentNode.children}"
var="childNode">
<af:commandLink text="#{childNode.title}"
inlineStyle="font-weight:#{backingBeanScope.NavigationBean.currentNode.title eq childNode.title ? 'bold' : 'normal'};"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
id="cmdlinkleaf" visible="true"
partialSubmit="true">
<af:setActionListener from="#{childNode}"
to="#{backingBeanScope.NavigationBean.currentNode}"/>
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
</af:forEach>
</af:panelGroupLayout>
</f:facet>
<f:facet name="orphan">
<af:panelGroupLayout layout="vertical" id="pgorphan" visible="true">
<af:goLink destination="" text="Back to previous page" id="orphanlink"></af:goLink>
</af:panelGroupLayout>
</f:facet>
</af:switcher>
But interstingly the command link or button inside these switcher or facets doesnot invoke any actionlisteners or action ....Tried many things and wasted much time to actually figure out the issue is only for the command links or buttons placed in the switcher...If i place something after the switcher...
<af:commandLink text="#{'clickme'}"
inlineStyle="bold"
action="pprnav"
actionListener="#{backingBeanScope.NavigationBean.handleNavigation}"
id="cmdlinktest" visible="true"
partialSubmit="true">
<f:attribute name="node"
value="#{backingBeanScope.NavigationBean.currentNode}"/>
</af:commandLink>
Then the action listeners or actions are getting invoked properly....Can you please tell what is wrong with the above snippet? I am using Jdeveloper 11.1.1.4 tech stack.
Regards
Prasath.C
Edited by: Prasath C on 05-Aug-2011 03:08
Edited by: Prasath C on 05-Aug-2011 03:09
Edited by: Prasath C on 05-Aug-2011 03:12

perhaps the XML parser doesn't like the format of your output. Is it formatted XML? I would output unformatted XML (without newlines, tabs and spaces between elements, etc.) and try again.
Perhaps the character encoding used isn't liked by the XML parser. Are you providing any character encoding to begin with? (UTF-8 for example)
It is hard to tell what could be wrong from such an ambiguous error message. The best thing you can do is try a flash forum, or poke around with the stuff until something works. You could also try putting some logging in the servlet to at least know that it is being called by the flash application.

EJB module for a 3rd party adapter not getting called

Hello All,
I have written and adapter module EJB code and calling it from Sender 3rd party Ariba cXML adapter.
This EJB is successfully build and deployed on the server but after I added it in channel in ID....the cXML channel stopped picking up the messages. When I removed the config from the channel, it started working again.
I think its a known bug in Ariba adapter that the audit logs can not be seen in RWB so it has made it more dificult for me to trouble shoot.
How can i check if the adapter was called at all and what went wrong ?
Is there a different way of adding custom modules in 3rd part adapters ?
Please help.

Hi Ranjeeth,
Even I had same issue...after lot of debugginh realise path specified in CC for calling adapter module was incorrect...please check if you are pointing to correct location where you have deployed your module...
Check this doc here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
According to it, if you properly configure the ejb-j2ee-engine.xml file, then you'd call your module using "localejbs/<JNDIName>".
Hope this will help.
Nilesh

Task in Lookup.USR_PROCESS_TRIGGERS not getting called

Hi,
We have created a process task adapter and copied this in Lookup.USR_PROCESS_TRIGGERS. This adapter works only when some change happens in User Form in a particular field (say First name).This adapter is not getting called for the users who are created through Bulk Upload. Although it is getting called when I am creating a user manually.
Regards,
Shubhra

This the issue with 11.1.1.5 version of OIM. It doesn't trigger on trusted recon. install BP02 for resolving this issue. We had resolved this by installing this patch
--nayan

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy

Thank you in advance. I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5). We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program: Installation master sapinst
We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password. Can anyone point me in the right direction on what is wrong? If you need more info let me know.
Thanks,
Erik

@ Sven & Markus
Well I have checked all the logs and there are no errors. What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
Here it shows that it completed successfully but in the export directory there isn't data when there should be.
INFO 2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
> IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully has been completed successfully.
See here:
/dev/exportlv 119.25 119.23 1% 16 1% /export
Thanks,
Erik

Accounting documents not getting generated for mvt. type 221 Q

Hi friends,
When goods are issued for consumption for project accounting documents are not getting generated.
I have tried with mvt. type 412 Q, 211 Q,
by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
Can any one throw more light on this?
Thanks and regards
SAP MM

Hi,
Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
or
Have you mantained Chart of accounts.
have you mantained Valuation area settings
Transaction event key
Valuation class settings.
Check your material master data in accounting view have mantained Valuation class.
Check your back ground settings OMWN.

EXIT_SAPLV01Z_013 for Batch master Update is not getting called for MSC1n

Similar Messages

Maybe you are looking for