SAP Solman EWA System ABAP error
Hi,
SAP Solman EWA services trows error .
The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
Syntax error in program "RDSVASAEA_ROOT_____________061".
The following syntax error occurred in program "RDSVASAEA_ROOT_____________061"
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
It throws same error for
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found."
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000315" not found."
**I tried the function module "BDL_GENERATE_LOGFUNC_INCLUDES" with the value "ALL" in the 'OPTION' field.
As well as 'UPDATE' but it throws error for these includes mentioned above.
Can anyone help for the same without SAP NOTE - 727998
Thanks in advance
Sachin Soni
>
Sachin Soni wrote:
> The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
>
> Syntax error in program "RDSVASAEA_ROOT_____________061".
>
> The following syntax error occurred in program "RDSVASAEA_ROOT_____________061"
Have you reported the correct program name?
According my information, "RDSVASAEA_ROOT_____________061" has not been created (nor shipped to customers).
You stated, that the recommended SAP Note did not help. I would suggest to request help from SAP Support via a customer message on SV-SMG-SDD.
Best regards,
Ruediger
Similar Messages
-
unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest
Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh -
Dear all:
Migration evironment:
Source system:
DEV system:SAP R/3 Enterprise 4.7x110,non-unicode, SID:DEV,database schema:SAPPRD
(because through brbackup / brrestore manner transplant from production system,then change the SID)
DB:Oracle 9.2.0.4.0 64bit
OS:AIX 5.3 64bit
Target system:
QAS system:SAP R/3 Enterprise 4.7x110,non-unicode,SID:QAS database schema:SAPQAS
DB:Oracle 10.2.0.2.0 64bit
OS:WIN2003 SP2 64bit (CPU:AMD Athlon(tm) 64X2 Dual Core Processor 5000+)
Now,in "Database instance installation"->"Oracle Post-Load Actions" phase occur errors:
sapinst.log:
INFO 2009-01-06 15:15:50
Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB.
INFO 2009-01-06 15:15:50
Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB.
ERROR 2009-01-06 15:15:50
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPA.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ora_sql_results.log:
===============================================================================
2009-01-06, 15:15:50 SAPINST ORACLE start logging for
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Jan 6 15:15:50 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected.
OPEN
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SAPINST: End of output of SQL executing program D:\oracle\QAS\102/bin/sqlplus.
2009-01-06, 15:15:50 SAPINST ORACLE stop logging
==============================================================
2009-01-06, 15:15:50 SAPINST ORACLE start logging for
connect / as sysdba ;
@@ddicora.sql
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Jan 6 15:15:50 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected.
Connected.
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.taora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS620' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQAS' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPQAS.iaora SET TABSPACE = 'PSAPQASUSR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
DELETE FROM SAPQAS.tsora
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPQAS.tsora (TABSPACE, INDSPACE) VALUES ('PSAPQAS', 'PSAPQAS')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPQAS.tsora (TABSPACE, INDSPACE) VALUES ('PSAPQAS620', 'PSAPQAS620')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPQAS.tsora (TABSPACE, INDSPACE) VALUES ('PSAPQASUSR', 'PSAPQASUSR')
ERROR at line 1:
ORA-00942: table or view does not exist
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SAPINST: End of output of SQL executing program D:\oracle\QAS\102/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2009-01-06, 15:15:50 SAPINST ORACLE stop logging
Please give me help and suggestion, Thanks!!HI Markus:
In the source system's RSCPINST:current NLS Settings show:
C o n f i g u r a t i o n T y p e :
Non-Unicode System
Non-Unicode - MDMP configuration
Attention!
The required language combination is supported without restrictions
only in Unicode systems.
Please refer to SAP Note 73606.
C o d e p a g e s :
1100 Code Page of Application Server
1160 Code Page of SAP GUI
D a t a b a s e t a b l e e n t r i e s :
TCP0C: Code pages and locale names
OK Checked and no inconsistency found.
TCP0F: Frontend code pages
OK Checked and no inconsistency found.
TCPDB: Database code pages
1100 SAP internal, like ISO 8859-1 (00697/00819)
8400 Simplified Chinese (based on GB2312-EUC, MS CP936)
TCP0D: Country code
(3 spaces) Latin-1 or MDMP
TCP0I: Processed language(s) entry
ACTIVE 1DE
L o c a l e c h e c k :
Locale: Required OS locales and their current status
Locale installed = the locale is installed correctly
Set locale failed = the locale needs to be corrected on the app server
clidev_DEV_00 de_DE.ISO8859-1 Locale installed
en_US.ISO8859-1 Locale installed
zh_CN Locale installed
P r o f i l e p a r a m e t e r s :
zcsa/installed_languages (value sorted):
clidev_DEV_00 1DE
Required profile parameter modifications:
OK Checked and no inconsistency found. -
EWA: error message in CRM check for SAP Solution Manager system
Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name Status Date of first entry Entries
CSABUPA0000000070 READY 03.12.2007 45
CSABUPA0000000934 READY 07.05.2008 45
CSAIBASE0000000000 READY 23.11.2007 36
CSA_ORDER_8000000000 READY 22.11.2007 5
CSA_ORDER_8000000001 READY 22.11.2007 3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AMHi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH -
MOPZ - Error during call of SAP back end system
Hi Experts,
I have this error during MOPZ - "select OS/DB dependent files" and following option as well.
I have checked SAP NOTE 982045, but still cannot solve the issue.
SM59 - SAP-OSS and SAPOSS connection test is successful.
I have no idea what else is going wrong. kindly advise id you have any idea.
Below are some error logs.
From MOPZ
Error calling SAP back-end system: Local gateway not running / CPIC-CALL: 'ThSAPCMRCV'SAP-OSS via RFC destination.
From SM21
Call of function GwRead failed, RC: -095
Communication error, CPIC return code 017, SAP return code 24
> Conversation ID: 13681187
> CPI-C function: CMRCV
From dev_rfc8
**** Trace file opened at 20140904 134347 Malay Peninsula Standard Time, by disp+work
**** Versions SAP-REL 721,0,300 RFC-VER U 3 1498740 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=247
Local gateway not running
ABAP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: )
Called function module: /SPN/SBI_INTERFACE
User: BT_BASIS (Client: 100)
Destination: SAP-OSS (Handle: 4, DtConId: 22F633E42CC0F1D280C9A0D3C1069543, DtConCnt: 1, ConvId: 12214252,{22F633E4-2CC0-F1D2-80C9-A0D3C1069543})
EPP RootContextId: A0D3C10695431ED48CFEB45C956820C9, ConnectionId: D3F533E43BF2F12C80C9A0D3C1069543, ConnectionCnt: 1
EPP TransactionId: D3F533E43BF2F12A80C9A0D3C1069543
SERVER> RFC Server Session (handle: 1, 18243574, {D3F533E4-3BF2-F12C-80C9-A0D3C1069543})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: CL_MO_SMP_ADAPTER=============CP)
SERVER> Called function module: AGS_MOPZ_SMP_RFC
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3712
CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=247
Local gateway not running
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1973
Thank you.
Por.Hi
there are following things you can do
1. log on to your SAP Router
2. check entries in SAPRoutab.
3. Telnet SAPSERV2 (Sap responding server) (Tcode oss1 will give you details of which SAP serve you are connecting ) on port 3299
4. if you are able to telnet SAPserve from your Router server then raise the call to SAP and ask whether they can reach your saprouter or not
5. check /etc/services files and check for service 3299 defined or not
6. telnet local Router server with port 3299
7 try to download Sap Note from SNOTE in you solman system.
all the best
Regards
Dishant. -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Hi Experts,
I am currently facing an issue/error while doing a homogeneous system copy with SAP NW 7.4 (SAP ERP 6.0 Ehp7) servers. Both source and target systems are test/demo servers and system copy procedure needs to be established as a part of implementation.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or Move( Last error reported by the step: Assertion failed: Unable to load database RD3. Refer to trace file sapinst_dev.log for further information.)
Sybase ASE version = 15.7_122
sapinst_dev log file description -
Error description (sapinst_dev log file) –
Execution of the command "isql64 -e -w999 -Usa -SSAP-PROD-TEST:4901 -X" finished with return code 0. Output:
Password:
1> use master
1> load database RD3
2> from 'F:/Backup_RD1_04042015/rd1_s1.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s2.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server session id is: 33. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s1.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s2.dmp'
Msg 3105, Level 16, State 4:
Server 'RD3', Line 1:
Data on dump will not fit into current database. Need 101376 Mbyte database.
1> online database RD3
Msg 930, Level 14, State 1:
Server 'RD3', Line 1:
Database 'RD3' cannot be opened because either an earlier system termination left LOAD DATABASE incomplete or the database is created with 'for load' option. Load the database or contact a user with System Administrator (SA) role.
No matter how much I try to execute the commands for loading database (LOAD DATABASE & ALTER DATABASE commands), i's not working. I have already added the size mentioned above. Although it still didnt work the size of the DB grew by 99GB (displayed in the incresed size of F: drive in Windows.server 2012 r2 OS level.
Any help leading to closure of this error is highly appreciated. I have attached all necessary screenshots for your kind reference.
Thanks and regards,
M. NizamHi Nizamuddin,
Message text
Data on dump will not fit into current database. Need %d Mbyte database.
Explanation
This error occurs when an attempt is made to load a database dump into a database smaller than the dumped database. You cannot use dump database or load database to shrink a database, regardless of the amount of actual data in the database.
Action
If your goal is to load the database from the dump, you must increase the size of the database being loaded into to at least the configured size of the dumped database. You can do this with either the alter database command or by dropping and re-creating a larger database.
If your goal is to shrink the total size of a database, you cannot use dump and load. You must copy all the data out of the database using bcp, drop the database and re-create a smaller database, then re-create the database structure with scripts, and reload the data with bcp.
extend your current master *database* on the master *device* to a total size of 101376MB(or more) (use 'alter database' command)
alter database master on master = <size in MB>
If there isn't enough room on the master device AND the master device is either a file system device in a file system that has free space or was created on a raw partition that is actually larger than the master device was defined, then you can use the DISK RESIZE command to enlarge the master device
disk resize name = "master", size = <additional space in MB>
Regards,
V Srinivasan -
Error while registration of SAPCCM4X in solman live system
Dear All,
Please help.
I want to CCMS configuration in SOLMAN system(cenntarl monitoring system)
I have done almost all prerequistes well
but while registration of SAPCCMS4X i m getting below error in SOLMAN prod system
ERROR: cannot open config file /usr/sap/<SID>/<>/log/sapccm4x/csmconf.
ERROR: CCMS agent is not registered at central CCMS system.
ERROR: Please start
ERROR: sapccm4x -R [-f <config file>] [pf=<complete path of agent profile file> ]
EXITING with code 1
What action need to be taken here.
Though for this i alraedy generated CSMCONF file which kept automatical at predefined path.
And then checked RFC for CSMREG user /pass & client.
Then i tried to register CCMS agent in Centarl system
I have below more doubt
after giving command
sapccm4x -R [-f <config file>] pf=<complete path of SAP-profile of managed instance>
its asking other detail
like system id : given
client []:
Here what client we need to give ?
It will same at which i want to monitor alert via rz20 or it will be by default 000( during registration ) it showing 000 by default
in filed client[000]: ?
This client should be same what we dfined in RFC / with user CSMREG/Pass ?
Please advice me what client we need to choose for SAPCCM4X registration in SOLMAN live
(000, 001 or at which i want to use tcode rz20)
Whats the use of CSMCNF file ?
we need to copy this file manualy at in required directory or during generation of file it will copied automatically?
Please help me to proceed further.
Regards,
VyashHello Tom,
Thanx a lot for help
but when i tried to register SAPCCM4X in central monitoring system i m getting below error
via unix with command
sapccm4x -R pf=/sapmnt/<SID>/profile/<>
After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
client [000] :
user [CSMREG] : CSMREG
language [EN] : EN
hostname of <SID> message server [] :<servernsame>
use Load Balancing [n]/y ? :
hostname of application server [] :
system number (00 - 98) :
[optional] route string :
trace level [0] :
please enter password for []: <password>
Try to connect ...
INFO: [] connected to , host <name> System Nr., traceflag [ ]
INFO:
INFO: RFC logon info for [] can be updated at any time with -R option:
sapccm4x -R <params>
INFO: Updated saprfc.ini in agent work directory /usr/sap/<SID>/D*/log/sapccm4x
ERROR: Monitoring segment belongs to central system <SID>
CCMS Agent SAPCCM4X may only be run for remote segments
that do not belong to central system<SID>
Therefore exiting....
Please help to resoulve this issue
as after registration RFC user always getting lock in 000 client dont know y?
Though i want to monitor alert on prod system client <> so do we need to register that client and need to create user/RFC in that client only or 000?
Please advice!!
Thanks&Regards,
Vyash -
Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista
This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!! Here is the contents of log.txt:
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\log.txt for details.
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Faisal,
Thanks for your response to my question. I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB. After installing VirtualDisk I only have 38GB of free space on my hard drive. System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB. Why are more than 50GB required?
If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
Thanks for your help!
Gary -
Error Install : SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
* at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
* at java.lang.reflect.Method.invoke(Unknown Source)*
* at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
* at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
* at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
* at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
* at java.lang.Thread.run(Unknown Source)*
Can somebody give me suggestion how to resolve my probelm.
thanks,
Amir
PS : I have all the requirements systemdid u installed loopback adapter as mentioned in the installation instructions?
Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
does your pc have internet connection available?
Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
is the installation process completed?
Yes the installation process is completed and with success (but without C:\sapdb)
(Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
how much time the installation taking.. usually the step of database installation and configuration takes a long time.
Not much time because there is not database installation
while logon to sap, what details are u giving.. the system number .. is it 00,
When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
which other SAP softwares are installed on ur pc.
In each time, when I tried to install SAP, I uninstalled all SAP software
I hope you can help me for the install
Note : I work on Vista sp1
Thank you for your help
Amir -
Error:SAP NetWeaver 7.01 ABAP Trial Version
Hi,
While installing SAP NetWeaver 7.01 ABAP Trial Version I am getting following error in the logfile generated.
Kindly help if someone has encountered the same and has been able to rectify it. Looking for your immediate response.
Regards,
Ratna.
(Nov 3, 2008 8:45:03 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$DiskSpaceCheck, wrn, WARNING: C:\ partition has insufficient space to install the items selected. 2972.3 MB additional space would be needed to install the selected items.
(Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Nov 3, 2008 10:09:04 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Nov 3, 2008 10:09:04 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi ,
I encountered the same Java problem, the problem occurs if your system contains JAVA components already installed. Try to remove them using add remove program from control panel and reinstall SAP.
Regards,
Manisha -
Error during installation of SAP Netweaver 7.01 ABAP Trial Version
Hello everyone,
i tried to install 'SAP Netweaver 7.01 ABAP Trial Version' on my laptop using an VMWare Server.
My used operating system on my VMWare Server is 'Windows Server 2003 Enterprise Edition'.
I´ve executed within the folder D:...SAPNetWeaver701SAPNW7.01ABAPTrialimageSetup.exe
and entered all necessary informations to start the installation.
More or less 30mins. later i got the following message from the system:
'An error occurred and product installation failed. Look at the log file E:sapdbNSPlog.txt for details.'
The log text show the following information:
Line: -
(Dec 25, 2009 1:53:43 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file E:sapdbNSPlog.txt for details.
(Dec 25, 2009 1:53:43 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Line: -
Can anyone help me with this??? I have no ideas how to solve this problem.
Thank you very much.Check end of Logfile C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/MaxDBSAPNWPREV.log
have you checked that log? -
Database Error during installation of SAP NetWeaver 7.01 ABAP Trial Version
Hi All,
I was installing the SAP NetWeaver 7.01 ABAP Trial Version but during the installation i got some MaxDB error.
Log.txt
(Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file F:\sapdb\NSP\log.txt for details.
(Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi,
In environment variables under system variables see if the path to java has been set,
JAVA_Home
C:\j2sdk1.4.2_11
JRE_PATH
C:\Program Files\Java\j2re1.4.2_11\bin\java.exe
Both these variables should be set.
The values would differ on the version of java that you are using and the
path where you have java installed.
I suggest you go with Java version 1.4.2_*.
Regards,
Vishnu -
SAP SOLMAN 7.1 error in ATM for DBACOCKPIT
Hi Experts,
My client's SAP Solution Manager 7.1 has been displaying the error message - "Error in RDI back-end setup occured!", since last one week. I am unable to analyze this to resolution, as there is nothing I couldn't find closely relative in the standard database SAP Sybase 15.7. ASE server configuration guides or in the SCN itself for that matter, which would help me resolve this bugging error.
I have also checked in system logs but have always found different types/varieties of database errors everyday. I am attaching the error screenshots for your kind reference and consideration. Kindly note that I have worked on most databases previously in an efficient manner except for Sybase ASE, which is relatively new to me.
When I click on repair, I am getting the following error, which my SAP Basis PM/lead has told me its a generic error.
Upon clicking on yes, I am getting the unavoidable error shown below -
The error is - "Error in RDI back-end setup occured!", as i have stated above.
I have checked the ATM logs and history and they are fine. I am getting error only in the ATM queue as shown below -
I am also getting the same database errors in event viewer as to those in the system logs for SAP SOLMAN 7.1 server.
I would appreciate it very much if one of the Sybase experts would help me out here. Speaking of technical configuration for any database in conceptual terms, I perceive this error to be a space issue as mentioned in the ATM queue. I believe I have provided sufficient details. The OS here is the Windows server 2008 R2 version.
Kindly mention if you need more details for a speedy and possible error analysis and resolution
This is an emergency task for me as I need to resolve it on ASAP basis. Rest assured, points for all right answers will be awarded generously.
Thanks and regards,
M. NizamHi Nizam,
Please share what is the database patch level for Sybase ASE 15.7
Additionall please review below SAP notes
1619967
SYB: DBA Cockpit Correction Collection SAP Basis 7.31
1558958
SYB: DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
1920025 DBACOCKPIT - Error 'Repair ATM' when started from different systems
Hope this helps.
Regards,
Deepak Kori -
Error to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version
Hi,
Can anybody help me?
I'm try to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version... and in the Running phase 11: Create sequence for the ABAP user, I had this error:
What do have I to do solve this problem?
ERROR 2014-07-13 14:24:19.395 [iaxxinscbk.cpp:244]
CJS-00030 Assertion failed: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR 2014-07-13 14:24:19.395
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR 2014-07-13 14:24:19.495 [sixxcstepexecute.cpp:988]
FCO-00011 The step SdbCheckExistingSequence with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Sequence|ind|ind|ind|ind|6|0|SdbCheckExistingSequence was executed with status ERROR ( Last error reported by the step :Assertion failed: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].).
INFO 2014-07-13 14:24:22.669 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Arquivos de programas\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2014-07-13 14:24:24.752 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2014-07-13 14:24:24.752 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .Hi,
Kindly follow SCN thread Sapinst error: No GUI server connected and try to restart the complete system.
Regards,
Gaurav
Maybe you are looking for
-
My daughters ipad mini is locked out. Dont ask, sister changed password, cnat remember now we are locked out. I have tried the hwole connect to itunes but nothing, it keeps telling u s we need to unlock the ipad. No Dah!!! Thats what I need help with
-
Yep ITunes crashes when I try to sync my ipod too
Am having similar problems as below. Every time I try to sync my new ipod 5th gen video to my G4 laptop it freezes up iTunes I reloaded iTunes, cleared the apple.com.plist from my preferences and restarted my ipod. Still no joy It is even not force q
-
I have not been able to format my media card. My phone does recognize it. But will not format for the blackberry pearl 8120 . HELP, I have done everything, and cant get it to format. I know I have the correct disk It is a scandisk 1.0gb Micro SD.
-
Cannot view recordings....and no recordings since 2:00 pm on 7/4/2012
I really expect to have recordings after 2 pm on July 4 to become visible to me. All of my recording that are on the monitoring screen say unable to view. apparently there is work being done on the server, but I seriously hope that the recordings a
-
Cannot Reorder Photos in Album
I am experiencing an issue where dragging photos in a manually ordered album does not allow me to change the order of the photos. See video below. Infuriating. 3.0.1 http://www.youtube.com/watch?v=gQUcSNxgfdA