SAP transaction enabled by speech recognition

hi
i'm looking into possible ways of approaching to an requirement that would enable users to perform transactions in the SAP GUI by giving commands (may be via voice recognition). I tried to check for materials that could help me to start with but unable to trace one. If this problem statemetn can be disucced i could get some ideas on how to proceed. so looking fwd for ur resposne.
thkx
Prabhu

Hi Prabhu,
As far as I understand there are two parts of it-
1. Invoke/trigger SAP applications from .NET.
2. Having an event to trap and trigger the execution.
Now first point (1) can be acheived through either SOAP (webservices) or RFC (.NET Connector) based communication. With this you will be able to invoke RFC/BAPI from .NET applications.
Regarding (2) you need to use SAPI liabrary (provided by Microsoft) to recognise the speech phrases and raise the event. And inside the even handler you can trigger the execution of SAP application.
Regards.

Similar Messages

SAP transaction enabled by speech recogition

hi
i'm looking into possible ways of approaching to an requirement that would enable users to perform transactions in the SAP GUI by giving commands (may be via voice recognition). I tried to check for materials that could help me to start with but unable to trace one. If this problem statemetn can be disucced i could get some ideas on how to proceed. so looking fwd for ur resposne.
regds
Prabhu

Hi Prabhu,
In future distribution centers, RFID, barcodes, and voice recognition (VR) systems must work seamlessly together to achieve a companys supply chain management goals. Each form of automatic identification data collection has warehouse tasks for which it is specifically designed to improve efficiencies. Companies need to evaluate voice recognition technologys potential beneficial role in their warehouse operations.
Warehouse workers receive work assignments and communicate progress through voice.
Tasks are generated by the SAP solution and translated into spoken commands that workers hear via a headset attached to a wearable mobile computer.
Workers responses are translated back into data and sent to SAP R/3 via a wireless network in a real-time working environment.
Voice recognition benefits;
1. Fewer data collection mistakes
2. Reduced returns
3. More accurate inventory counts
4. Increased overall warehouse productivity
Bye,
Muralidhara

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Window size of web-enabled SAP transaction in an iView

I have a problem which maybe a bug concerning a web-enabled SAP transaction within a Portal iView. If the transaction is an ABAP report or a Dynpro program that requires a wide display area, the display is cut-off which requires to user to use the scroll bars. However, if manually entering the SAP transaction within the tCode input-field of the web-enabled transaction inside the iView, the window length changes and thereby the scroll bar disappears.
I would like to know how to set the inital width of the web-enabled iView so that there are no scroll bars when the iView opens an SAP transaction which requires a wide display area. I've tried both the Wizards for creating iViews for R/3 and SAP transactions without success.

Hi,
You have to set the iview property to FULL-PAGE and height to be some 8000 in the portal then the problem solves.
Regards,
Lakshmi.

Latest Firefox FlashPlayer Plugin (14_0_0_179) software exception 0xc0000710 on Windows 7 32-bit when Windows Speech Recognition is enabled and running.

Hi,
Please note that I am reporting a problem happened on a different computer than the one that I am now using to submit this report.
Computer: Dell Optiplex 980
OS: Windows 7 Pro (with all the Windows Updates installed as of Aug 21, 2014)
Browser: Mozilla Firefox 31.0 (most current version as of Aug 21, 2014)
Adobe Flash Player Plugin (for Win7 32-bit, Firefox): the latest FlashPlayerPlugin_14_0_0_179.exe
If I enabled the Win7 Speech Recognition feature, the Firefox FlashPlayer Plugin would generate an Application Error (software exception 0xc0000710) when the FlashPlayer Plugin is *first launch* in a Firefox session.
Subsequent launching of the Flash Player plugin in the same Firefox session would *NOT* trigger the same software exception error again - until another Firefox window is launched.
After the software exception error dialog was dismissed (via the OK button in the dialog), the plugin would go on running without any further problem and the flash video/audio would play correctly.

Please try a clean Flash plugin install: [http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html] this error was seen last in version 11.8. Please also make sure that your video drivers are up to date: [https://forums.adobe.com/thread/945765] and [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

System sleep settings become disabled when speech recognition is enabled. Is this by design?

System sleep settings become disabled when speech recognition is enabled. Is this by design?

randallto wrote:
There was another setting in bois I found that required scrolling in the bios screen. Tricky to find with no mouse.
I am not sure if some day these terminologies can be standardized so someone can follow very specific instructions rather than vague instructions that are further obfuscated with the use of technical acronyms.
That is the problem, that error message in VM is not explicit enough as to what steps to take to correct the problem. These bois screen authors decide arbitrarily to name settings as it relates to their world personally and there are not standards.
I still don't know how that got changed in the first place but that is not an issue with VM ware as to what else is changing the setting.
Do you have any explicit suggestions as to how the error message can be improved?

How mobile device ( rfid/barcode reader) communicates with SAP transaction.

Dear Friends !
Good morning, How are you ?
I want to understand that in ITSmobile How Mobile device ( RFID Reader ot Barcode scanner/reader) to fetch the data and supply the ITS screen.
I believe every mobile device has some .dll file or something in that we have some methods if we call it say in .net or java application we can read the rfid or barcode and from the returning paramter of the .dll method we can get information what we want ( if i m not wrong).
now the question is if I have some barcode /rfid number which is assigned to sap material number. if on mobile device I run mm02 transaction code n trigger the gun can I get the material number in material number field . ( assume I have program which can fetch the material number from barcode/rfid number.) ? but to pass rfid number / barcode what should I do. I can write javascript and call that method but dont know weather I can use javascript or not in that.
to be simple:
How can I get barcode / rfid number to my sap transaction. if possible
please give me any suggestion. document link... help.... whatever may help me to understand this. I will greatly appreciate your reply
Thanking you
Regards
Naeem

Hi Ajay,
Please refer to note 1057759 for the delivered Drivers for Peripherals in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
The Javadoc to get an idea about how to use those PIOS API for barcode scanner
http://help.sap.com/javadocs/nwmobile/SP3/laptops/com/sap/ip/me/api/pios/scanner/ScannerConnection.html
As input from Barcode scan have to be taken in Wedge Mode, there is no need to do any developments in MI JSP Application. To enable barcode scan one can download barcode scan tools available from Handheld Vendor sites
Regards,
Amith

SAP Transaction in EP iView

Hi,
I am trying to create a SAP Transaction iView in EP.
When using SAP GUI for HTML i am getting the error as
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webgui/!' is not valid! Please check the protocol and host entries for system
When I try with SAP GUI for Windows, I get "Connection to partner broken" error.
I am also not able to get the desired result with SAP GUI for Java.
Can anyone please throw some light on this?

Hi Suprita,
If i am not mistaken, Integrated ITS will coem with BASIS 6.40.
If you basis version is 6.40 then ITS will be avialable in R/3 system.
Check the Integrated ITS is enable and the necessary settings have been done in transaction SICF, The ITS will come as a service, and also enable all the services in SICF transaction.
Check the Connection test of your Integrated ITS, if it is not available in SICF transaction then you may need to install the ITS seperately. The error you are getting is because, may be the ITS parameters are wrong.
Hope this helps.
Regards
Sumanth
Regards
Sumanth

Is it possible to use Speech Recognition with Final Cut Studio?

Is it possible to use Speech Recognition with Final Cut Studio?
Using either Speech, AppleScript, Automator or a 3rd party app
like iListen, can I enable Final Cut Studio apps to respond
to voice commands?
(e.g. I say "I" in Final Cut Pro and it sets an in point)
thanks

Yes, I wish "Make it really good" and "Fix my rough cut"
were commmands too
I did hear from the folks at iListen that
they are planning on releasing a ScriptPak
for Final Cut Studio next year which could be
cool
and that yes, iListen has some capability to
integrate Speech Recognition with Final Cut,
guess I need to give it a try for a test ride

SAP Transaction via WinGUI

Hi,
we have got the following issues with the build in SAP Transaction iView:
If you create a SAP Transaction iView using the iView Wizard the WinGUI is displayed within the portal frameset. The "Create a new session" button is disabled.
- Is it possible to display the WinGUI as common as a separate window?
- Is it possible to enable the "Create a new session" button?
Best Regards
Mike

Hi,
You can display the Page in another Window by setting "Launch in New Window" to the value 'Display in Separated Window' but it will still be embedded in a browser window !
As far as I know, even doing this, it won't enable the "Create a new session" button.
What you would need is to launch the SAP GUI rich client from the Portal in a separated process... Does someone know how to do that out there ?
Best regards,
Guillaume

Run SAP transaction from Java?

I'm looking for answers for two questions:
1) Can I run an SAP transaction from Java & capture the result either in a file or table.. or any such structure?
2) Can I run an ABAP report directly from Java? and then capture the result as well? I realise that I can use the JCO to run any RFC enabled function module..? But what about a report itself.? Can I run the report behind an SAP transaction directly from Java?
I need this information urgently, and would appreciate any help on this.

Hi Deepika,
I think the requirement you have asked is quite complex and there is no solution as far as i have know.
You can use BAPI to run SAP Transactions for example BAPI_MATERIAL_DISPLAY will take you to MM03 transaction when you pass a valid material number to it.
When i searched for the same i ended up with no solution,
but got a good link which gave some idea
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296869_idx25_off25,00.html
Go through that link that might be helpful.
Thanks & Regards,
Kathir~

Accessing SAP transactions through ITS

Hi,
ITS has been activated in our system.
Can you please let me know how to access standard SAP transactions (MM03, VD03) in the browser (ITS enabled in SAP).
Is it like http://host:port/sap...
Also can you please suggest the list of steps to follow to make sure ITS is enabled corrrectly in SAP.
Common problems if ITS in not enabled correctly... and how to fix the problem.
Thank you very much.
-Vidya

Hi,
SAP transaction, SE93, under the option 'SAPGUI for Html' is the service that would need to be activated prior to doing the test page.
Once the service has been activated, you can test the service in your SAPGUI screen, which will then open up the url to view all SAP transaction.
Hope this helps,
Jin Bae

Speech recognition server using all kinds of memory!

I'm running an imac 27" with 8gb of memory and have been doing some video work lately. Watching things with activity monitor I noticed that speech recognition server process was using 800mb + of memory. Normally I keep speech recognition started but activated by voice suppressed with the escape key.
I have already found that -using- speech commands prevents the computer display from going to sleep, like this discussion - https://discussions.apple.com/message/11395271?searchText=speech%20recognition%2 0server#11395271
I reported this as a bug to Apple, and they admitted there is a problem, and that maybe they will fix it but no guarantee.
I created a workaround for the display sleep that seems to alleviate both situations, I "wrote" an applescript to restart speakable items. It's pretty simple but you have to wait for the processes to go away, around 30 seconds or so.
Has anyone else seen or reported the excessive memory use with speech recognition?

That's wishful thinking if you think an update will be made overnight by Apple because of a complaint by an individual.
10.7.3 reportedly only updates:
Add Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian language support
Address issues when using smart cards to log into OS X Resolve issues authenticating with directory services Address compatibility issues with Windows file sharing
10.7.2 reportedly only updates:
iCloud stores your email, calendars, contacts, Safari bookmarks, and Safari Reading List and automatically pushes them to all your devices. Back to My Mac provides remote access to your Mac from another Mac anywhere on the Internet. Find My Mac helps find a missing Mac by locating it on a map and allows you to remotely lock the Mac or wipe all its data. Getting started with iCloud is easy. After installing the update, OS X will automatically present an iCloud setup panel. Simply enter an existing Apple ID or create a new one and then follow the on screen instructions. To learn more about iCloud visit http://www.apple.com/icloud.
The 10.7.2 update also includes Safari 5.1.1 as well as fixes that: Allow reordering of desktop spaces and full screen apps in Mission Control.
Enable dragging files between desktop spaces and full screen apps. Address an issue that causes the menu bar to not appear in full screen apps. Improve the compatibility of Google contact syncing in Address Book.
Address an issue that causes Keynote to become temporarily unresponsive.
Improve VoiceOver compatibility with Launchpad.
Address an issue that causes a delay in accessing the network after waking from sleep.
Enable booting in to Lion Recovery from a locally attached Time Machine backup drive. Resolve an issue that causes screen zoom to stop working. Improve Active Directory integration.
10.7.1:
Address an issue that may cause the system to become unresponsive when playing a video in Safari. Resolve an issue that may cause system audio to stop working when using HDMI or optical audio out. Improve the reliability of Wi-Fi connections. Resolve an issue that prevents transfer of your data, settings, and compatible applications to a new Mac running OS X Lion. Resolve an issue in which an admin user account could be missing after upgrading to OS X Lion.
These are each information from the various update pages.    While Apple has been known to include unreported updates in their version updates, the closest to something desired was the Voiceover improvement in 10.7.2. That though is of speech from putting the cursor over text to read out loud.
If they are running 10.7.3, and have not seen improvement, then my advice from my other post is good.
I would also indicate that one is running 10.7.3 in one's profile so one knows one isn't missing any updates that may not already be applied.

Recreating SAP transaction...

I am in the process of recreating an SAP transaction in web dynpro java. I'm fairly new to the SAP world so I am running into some roadblocks. I understand how to create models and such to access SAP back-end systems. The specific transaction that I am looking at is iw21 which is the Create PM Notification.
from the screen, when you select notification type, I want to translate that into a drop-down box in web dynpro. My problem is though finding that information to display in the drop-down. I am able to connect to the ECC system and create the model but I don't know what fields or anything relate to the ABAP field.
Is there an easy way to translate this and find out what information I need to grab to be able to recreate this screen as a web dynpro application.
Any help or references would be great.
Thanks.

Dear Gabel8,
If you want to achive same functionality as iw21 transaction in the webdynpro then you should have the remote enabled function module RFC's or BAPI's to connect from webdynpro to get the required runtime data's.
Please get in touch with ABAP team and ask for RFC for the tcode. once you hvae RFC's or BAPI's then start working on webdynpro and devlop the functionality as you want.
Best Regards
Arun Jaiswal

SAP transaction iview of GUI for html never works

Hi All,
We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
However, each of these transaction iviews throws the same error messages as below :
Error when processing your request
What has happened?
The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
The following error text was processed in the system TD1 : This function is not possible
The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP.
I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
I have noticed that none of the ITS services never work.
I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
Regards,
Anil Kumar.

Please don't cross post messages....

SAP transaction enabled by speech recognition

Similar Messages

Maybe you are looking for