SAP TRM : TRS_SEC_ACC - Auto Assignment Of Security ID
Dear All,
We have a requirement where the Securities Account should get generated as running numbers.
In standard we have to provide the Security Account so that the system will allow us to fill the required data such as
Depository bank
Clearing acct
Sec.acct number
Beneficiary etc.
But as in our case user don't want to key in the Securities Account , they want the Securities Account should get generated as running numbers , is it possible?
Kindly Suggest.
Regards,
Reenu John
Hello Feng,
Thank You For Your Reply:)
Please Note : Security Account will be maintained and we are going to use that while creating the transaction using TS01.
The issue is while creating the Security Account (Alfa/Numaric) in Master Data, Business needs a running number in the below Highlighted Field.
Please find the below screen shot.
In general when we try to create the Security Account using Tcode : TRS_SEC_ACC , we have to manually provide the Sec Acct (Alfa/Numaric) in the below Highlighted Field.
But in my case the requirement is Business don't want to manually Key in the Sec Acct , they need a running number should get generated.
All other details in TRS_SEC_ACC such as Depository bank , Clearing acct , Sec.acct number ,
Beneficiary etc. they will key in manually except the Sec.Acct:(.
Regards,
Reenu John
Similar Messages
-
Quota arrangement - winning contract is not auto assign in SC
My Problem: Winning contract is not auto assign to Shopping cart
I created a Quota Arrangement (QA). It contains 2
contracts, for example in line item 1, contain Contract with Supplier
'A', with target percentage of 60%. In line item 2, contain Contract with
Supplier 'B', with target percentage of 40%. I did not specify any quotabase quantity.
For your info, the contract for Supplier 'A" is a Purchasing Contract,
with target value of 80 (currency Malaysian Ringgit). Contract for
Supplier 'B' has target value of 20 (currency Malaysian Ringgit). When Icreate a Shopping Cart, with quantity 5 (each-EA) and price per unit is
2
(Malaysian Ringgit), total is MYR10. When I go to Source of Supply tab,
the system showed 2 suppliers from the 2 contracts. It did not
automatically assigned to the winning contract. We still have to choose
which contract to be assigned. I created another SC after that until theContract exceeded quantity, but the system does not proposed winning
contract automatically. Please help.
Cheers
AINyes, the contract have company code
-
Portal Master-detail form how to auto assign detail record sequence number
Portal Master-detail form how to auto assign detail record sequence number.Please help me?
You can just read the following section
Can I specify a sequence number generator as the default value for a form column?
Yes. Enter the following in the "default value" field for the column:
#<schema name>.<sequence name>.nextval
where <schema name> is the name of the schema containing the sequence, and <sequence name> is the name of the sequence. The entry is preceded by a "#".
For example, if the schema name is "SCOTT", and the sequence name is "CUSTOMER_SEQ", the default value entry is:
#SCOTT.CUSTOMER_SEQ.NEXTVAL
same way you can do for master - detail form.
for more information on forms please refer the following URL.
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#BuildingApplications
hope it helps. -
Unable to assign all security roles to a user with a new custom security role
Dear All,
Happy New Year.!
I have a query regarding the assignment of Security Roles to new users in CRM. Normally we assign the security roles to new users via an Admin user who has 'System Administrator' security role assigned to him/her. This works perfectly fine, and we can assign
any desired security role to the new user.
However, in our case, we need to delegate the user creation rights to some of the client partners. We do not want to give them access to all the Administration functions; hence we created a new Security Role, lets say 'Support User Role'. We have provided
'Create', 'Append', 'Append To', and 'Assign' rights on 'User' entity for this new security role. With this security role, we are able to create new users now, but we are only able to assign 'Agent' security role, not any other security roles.
For example, if user 'x' has Security Role defined as 'Support User Role'. If 'x' tries to add a new user 'y', then 'x' is only able to assign 'Agent' security role to 'y', but not any other security role. As per business requirement, 'x' should be able
to assign some other security roles, including 'Support User Role', to new user 'y'.
I believe that there is something missing in Security Role configuration, which is causing the above problem. We compared both 'Support User Role' and 'System Administrator' security roles, but not able to figure out which minimum rights we can provide to
'Support User Role' so that users with this security role can only add new users (with any security role), and that they are not having access on any other Administration features as well.
Appreciate any help that you can provide on the above issue.
Thanks in anticipation.Hi,
Can you check if you have organization level Read access for Securitity Role and Organization level Assign access for Security role.
Refer:-
http://www.magnetismsolutions.com/blog/paulnieuwelaar/2013/04/22/permissions-required-to-manage-roles-in-dynamics-crm-2011
Hope this helps!!!
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question -
Auto-assign LPNs when performing receipts in Oracle WMS
I am wondering if there is a way to auto assign LPNs to a receipt.
Example:
I order 2700 widgets
900 widgets = 1 Pallet
When the Order arrives; using the Mobile Devices; do I have to receive each pallet individually or can I perform one receipt and have Oracle configured to auto-assign the LPNs?
We are running on 11.5.10.Are you open to using ASNs. If an ASN is created for a the PO, then you can have the material packed in the way you need it to be. The LPNs structure will be retained on receipt.
Amit -
Temporary bypass of auto assignment of Inspection type
I have checked 'auto assignment' in QM master data view. My goods receipts are generating inspection lots with 01 inspection type. This is all good. Is it possible to trick the system not to assign the inspection type in certain cases even though 'auto assignment ' is setup ? If this is possible I would like to use this to model an ad-hoc first article inspection as required by my client.
Hello FF,
I tested your suggestion of creaing multiple plans and tricking system not to assign any inspection plan. It worked. I have multiple inspection plans for Prelim series( say 501 usage) and one '01' for normal incoming quality inspection. When a Vendor calls the buyer and cautions that next shipment has some process changes/tool changes/new raw material introdcued etc., some at Client site has to modify the QIR to put in Prelim status. At the time of GR, system gets confused on which 501 plan to assign and leaves the assignment open in the insp. lot. Then manually QI inspector has to assign the plan knowing the vendor's caution. Again, Gagesh question of how change being communicated is not anwered here. But I may propose an enhancement in the PO screen( a check box may be) that buyer puts in after receiving communication from Vendor. This flag may run a program to put the QIR status to Prelim status. Lets see how it goes. My question is answered. Thanks to you all for inciteful help. Points goes to FF for the 'Idea'. -
Standard vs Advanced module of SAP TRM
Hi gurus,
do you have any idea, what is the difference between Standard and Advanced module of SAP TRM? Is it related to some licencing differences? If it's licencing, can you describe that is short.
thanks a lot for your reply.
Rgds,
Renatasto be honest I don't remember the outcome, sorry
it might be that the Customer asking the question misunderstood some marketing material, so was trying to verify.
BR
Renatas -
ISE - auto assign a device to group upon device registration
Hi,
Is it possible to auto assign a device to group upon device registration?
Typically in the registration portal, once "Register" button is clicked, the MAC address is put into "Registered Device" group, but let's say I want it to be put in different groups depending on the AD group? (Let's say when if Staff A register the device, the device automatically put into group A, Staff B to group B, and so forth)
ThanksIf you create a portal Specific for device registration, you can define to which ID groups will belong the registered endpoints.
I didn't tried this, but it might be possible to have a different portal for registration based on AD group, if you chain it after CWA or Dot1x. That would make an additional redirection though. -
Auto-assigned IP address on an open network
Hi Mac users,
I guess somebody else has already had that problem (or I would really be the unluckiest person in the mac world), but I can't find any solution to it, so PLEASE help me!
I have had my MBP for 6 months, it came with Leopard, and in November I upgraded to Snow Leopard (with someone else's CD that I can't get back do please don't tell me to do a clean Snow Leopard install). I'am not really a Mac pro cause I used to be a Windows user (yeah I know) and I never really got any problems with my Mac so please explain clearly if you have a solution for me!
Here's my problem :
I need to access an open network at my school. You're supposed to connect to this network without entering any weep or pa key, than you get to a page where you login with your school information. Then you get full internet access (web, skype,…)
The thing is that I can't event connect to this network… it says "Airport has an auto-assigned IP address 169.254.143.75 and won't be able to connect to the internet" (my computer is in french so my translation may vary from the english message). This occurs with Automatic DHCP for IPv4, and whether IPv6 is in Automatic or in Disabled setting.
The exact same thing happens whan I connect to the network using the Ethernet cable... I get the auto-assigned IP address and all...
Of course, I tried disabling and enabling Airport, and renewing the DHCP, but I always get this auto-assigned IP address.
I know the problem doesn't come from the hardware because I can connect without any problem to my wireless network at home.
I am using the 10.6.2 version of Mac OS and I already checked that all the available updates are installed.
I had a similar problem before upgrading to Snow Leopard : I could connect once to this open network, but then if I closed the lid of the computer, and then reopen it after a while, it wouldn't connect and I had to restart it entirely...
One of my friends has a Mac running with Leopard, and he has no problem connecting to the network, and neither do the windows user. I don't think it's a problem with the number of connections available on the network because I can NEVER connect to it…
Please help me!!! I'm hoping a Mac genius pops out of the computer and tells me what to doBonjour
The weirdest thing is that wired ethernet is not working, not getting an IP address. This may be some kind f incompatibility with the hardware but I doubt it.
Did you check in Airport and Ethernet settings that 802.1X is not enabled and that Ethernet negociation is "Automatiquement".
Also, you can completely wipe network profiles by removing those files from /Library/Preferences/SystemConfiguration/ :
NetworkInterfaces.plist
com.apple.network.identification.plist
com.apple.airport.preferences.plist
Then reboot -
Create users and assigning them security on the Entity dimension
Hi All,
I’m working with Hyperion ESSBASE 11.1.1.3 and Hyperion Planning 11.1.1.3 and I have a problem related to create new users (without admin permissions) and assigning them security on the Entity dimension.
When I access with these users to a Dataform in Planning appears these message:
“Security and/or filtering has resulted in a required dimension not being represented on this data form”
I have followed these steps:
- I have created new users (Native Directory) and provision them against essbase and the planning application in Shared Services.
- I have expanded the essbase server > security > refresh security from shared services > all users.
- I have assigned security roles in all members of Entity dimension in Planning.
- I have refreshed database and security filters in Planning.
Please help
Thanks a lot in advanceHi,
You will have to apply security to all the standard dimensions and not just entity, so that will be account, entity, scenario and version.
Cheers
John
http://john-goodwin.blogspot.com/ -
Auto Assignment of Cost Center & GL in PR
Hi Experts,
Reqt is -
Auto assignment of Cost center & GL codes in Purchase Requisition based on Material type
i search SDN & then i configured OME9, OMGO & OBYC.
But still its not picking Cost center in PR.
Could you please suggest..what m i missing??
Regards,
JackieHi,
Check the setting and assignment in following t.codes
1.OME9,
2.OMGO
3. OBYC
4.OKB9
For more check the link:
http://www.bluemarlinsys.com/ns/0603-03.asp
Kuber -
Auto Assigned distribution rule to exchange gain/loss acct in Banking
Hi All,
I have a customer that have this requirement. They wanted the exchange gain/loss account generated by Incoming payment or Outgoing payment to be auto assign with profit center if it is defined at the payment screen.
The result now is, even though you have assign the distribution rule on each reconciled invoice during payment, double entries generated will not have any distribution rule assigned even though it involve exchange gain/loss that is P&L account.
Thanks in advance.
Regards,
MHHi Kamlesh,
Thanks for the reply. However, we can't assigned the distribution rule at Chart of account as the incoming or outgoing payment may involve different division each time thus the exchange gain/loss account should be assign to respective division. Thanks.
Regards,
MH -
Hello all,
This is my dilemma; I have a PDF file that is fairly large (over 150 pages) and I need them to have a destination on each page where the name of those destinations are the page number itself. Now I could go through each page and set the destination myself but I have 7 PDF files to do this for that are varying lengths. Is there a plug-in or built-in function that would auto assign a destination per page that was the number of that page? I haven't been able to find anything anywhere as of yet. Just trying to see if I could save myself some trouble and time by not hand doing this. Thanks in advance for any help/assistance anyone can give.Harucho,
Bernd's "file.pdf#page=3" is alluding to PDF Open Parameters.
These have been around for a while.
See Adobe Developer Knowledgebase document 52852 to view the versions listing.
http://support.adobe.com/devsup/devsup.nsf/docs/52852.htm
Acrobat 9 - Parameters for Opening PDF Files
http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Acrobat 8.1 - Parameters for Opening PDF Files
http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Acrobat 7.05 - PDF Open Parameters
http://www.adobe.com/devnet/acrobat/pdfs/PDFOpenParameters.pdf
Acrobat 7.0 - PDF Open Parameters
http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf
~ Related Info - UNC/URL/on local machine Info- Good to Know ~
Permanent Link: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=317300
http://kb2.adobe.com/cps/317/317300.html
Permanent Link: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=326332
http://kb2.adobe.com/cps/326/326332.html
Using the HTML embed Tag to Display a PDF on Your Web Page
http://blogs.adobe.com/pdfdevjunkie/using_the_html_embed_tag_to_di.html
Be well... -
Task Auto-Assignment in PJM (turning it off)
My client is looking to turn off Task Auto-Assignment in Project Manufacturing after a restructure of the Project WBS / FBS. It will no longer be needed.
I was wondering if anyone has done this. What are the steps? What are the concerns of doing this (data corruption, conversion, etc...)? Release 11.5.10.2
I do know that one step in order to disable task auto-assignment is to change Project Control in Project Organization Parameters from Project to Task. Anything I am missing? When I do this and then try to assign the Project and Task to the Job (work order) it will not save. It gives me an error (Error: Task Auto Assignment Rules do not exist for the Project Assigned to this job). The work around is to turn task auto-assignment back on (Project Control field), assign some rule to the project in Project Parameters, and then turn the task auto-asignment back off. This then allows me to "save" the project and task to the Job (work order), but I would never be able to roll this out in a Production environment.
Please help. Thanks in advance!
AndyHi
I haven't tested it, but may suggest some considerations.
All inventory and WIP transactions need to be costed and interfaced to Projects by cost collector before you change the setup of the project control in the organization.
If you use Order Management, you might need to insert task number to any open sale order line.
If you have open requisitions and purchase orders, they also need to get task number on the distribution lines. That is true even if the items were already received but not yet billed.
On hand items in Inventory project locators, need to be transferred into project and tasks locators.
Any planned work order, even if not yet released, need to get the task number.
Based on the quantity of existing locators, jobs, POs and sale order, you might want to consider if it would not be easier to setup a new inventory organization with project and task control, and then move all PJM activity from existing organization into the new one.
Dina -
Your user has no SAP Support Portal user assigned
Hi all,
in transaction SM37 I found a job that almost everytime ends with error. Name of the job is "SM:SYNC SAP SESSIONS" and it's executed daily. The error message is :
Job started
Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000000452, user ID SYS_JOBYSAP)
Your user has no SAP Support Portal user assigned
Job cancelled after system exception ERROR_MESSAGE
Everyday the job is scheduled automatically by another job "SM:SCHEDULER". I suppose that is same on your systems.
I know the error message say that I should try to assign S-user to user SYS_JOBYSAP but I think it should not be the problem because some days the job ends with no errors. Also when I duplicate some old job (with status Cancelled) and execute it immediately the job ends in green.
Do you have any idea what could be wrong? Is it possible that there is some problem with connection to SAP almost regularly everyday in same time?
Best regards,
ZbynekI would like to check whether the SAP service that is used by job SM:SYNC SAP SESSIONS is running in given time. I need to re-schedule job SM:SYNC SAP SESSIONS to other time. How is it possible? I think the job SM:SCHEDULER uses some table that contains detail informations about scheduled jobs. Is it right? Do you know name of the table?
Regards
Zbynek
Maybe you are looking for
-
Updating ipad 3 receive err cde 1664 how do i fix this
When attempting to update my ipad 3 (wi fi 3G VR)-- I receive error code 1664 & states to verify network. Anyone know encounter this problem & have a fix?
-
ACR 6.1 - 64bit for Win7 - No Worky
I use Win 7 (64 bit) and I popped in the ACR 6.1 (32bit) plugin for PSE 8 - and works fine. Curious though, Adobe offers a 64 bit version of ACR 6.1 also - but my 64 bit Win7 did not accept it... its a known dud or can it work? thank-you
-
If I have a single, individual membership can I put Lightroom and Photoshop on both of my computers?
-
Is there a way to bake a spherical or sky map from AE?
I want to make a sky map for Trapcode Horizon to use in my scenes, 16000x8000 pixels. I'd love to be able to put elements in 3d space (far in the distance, obviously) in After Effects and then have that baked into a sky map (as opposed to keeping tho
-
Resume from standby does NOT ask for password--how to fix?
On my X240, when I resume from standby, I am NOT being asked for my password. But I want to. In Power Manager, in Events, I keep setting Require password on standby resume to yes, but the computer comes out of standby when I touch the keyboard, witho