SAPKB70013 stopped at XPRA_EXECUTION
Hi All,
While importing Support Packages for NW 2004s, Basis component , Patch : SAPKB70013,
SPAM Phase stopped at XPRA_EXECUTION,
Reason for error : TP_STEP_FAILURE,
Return Code : 0012
Error Message : OCS package SAPKB70013 ,tp step R, return code 0012.
Before this error occurred, SPAM prompted for SPDD adjustment, i called up SPDD and checked in the system , all the elements under With Modification Adjustment are green tick in front of the object.
I returned back and choose Confirm Adjustment and continued with patching and strucked at XPRA_EXECUTION.
i have checked ST22, has short dump with SYNTAX_ERROR.
Runtime Errors SYNTAX_ERROR
Short text
Syntax error in program "SAPLSXMBCONF ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_XMS_PERSIST_ADM============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSXMBCONF " in include
"LSXMBCONFU20 " in
line 658:
"The field "CO_PARAM_TABLE_SWITCH" is unknown, but there is a field wit"
"h the similar name "CO_PARAM_ACL_CHECK". "CO_PARAM_ACL_CHECK"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_XMS_PERSIST_ADM============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLSXMBCONF ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPLSXMBCONF :
"The field "CO_PARAM_TABLE_SWITCH" is unknown, but there is a field wit"
"h the similar name "CO_PARAM_ACL_CHECK". "CO_PARAM_ACL_CHECK"."
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "48891376E27F63AEE100000095C38BAA"
Program............. "CL_XMS_PERSIST_ADM============CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_XMS_PERSIST_ADM============CP" -
in "CLASS_CONSTRUCTOR".
The main program was "RSAL_BATCH_TOOL_DISPATCHING ".
In the source code you have the termination point in line 39
of the (Include) program "CL_XMS_PERSIST_ADM============CM008".
The program "CL_XMS_PERSIST_ADM============CP" was started as a background job.
Job Name....... "SAP_CCMS_MONI_BATCH_DP"
Job Initiator.. "DDIC"
Job Number..... "1630420C"
Any help is appreciated.
Naren.
Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi
Similar Messages
-
Import Stops at XPRA_EXECUTION
Hi All,
Currently we are on stack14 and moving stack19 on ECC 5.0. While importing it is stopping at phase XPRA_EXECUTION. Can someone throe light on this error ? Thanks.
Regards,
Priyank.Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi -
Error while importing SAPKB70013 component?
Hi,
We got Solman 4.0 running in windows 2003 server.
When i tried to import the BASIS sp components SAPKB70013, SPAM stopped at XPRA_EXECUTION stage with the following error
"Method push_client is not declared or inherited in the class CL_FDT_STORAGE_DB"
I went thru the sap note 822379 (Known problems with SPs in SAP NW 7.0s)
But i could not find any solution from this note to resolve this issue.
Appreciate your help.
RamHI,
In SPAM i got the following components:
SAPKB70013
SAPKA70013
SAPK-400C4INCPRXRM
SAPKITL423
And here is queue log details:
Post-import method SFW_AFTERIMPORT started for SFBF L, date and time: 20080825172919
Post-processing for SFBF BF_TRANSTEST was already performed successfully earlier
Post-import method SFW_AFTERIMPORT completed for SFBF L, date and time: 20080825172919
Post-import method ACID_CREATE_INCLUDE_AFTER_IMP started for ACID L, date and time: 20080825172919
Post-processing for ACID BADI_CONFLICT_CHECK was already performed successfully earlier
Post-processing for ACID BGRFC_SCHEDULER was already performed successfully earlier
Post-processing for ACID FDT_CALL_SEQUENCE was already performed successfully earlier
Post-processing for ACID FDT_CHECK_GENERATED_RESULT was already performed successfully earlier
Post-processing for ACID FDT_GENERATION_ERROR was already performed successfully earlier
Post-processing for ACID FDT_PROCESSOR was already performed successfully earlier
Post-processing for ACID FDT_STORAGE was already performed successfully earlier
Post-processing for ACID FDT_UNKNOWN_OBJECT was already performed successfully earlier
Post-processing for ACID SBTI_XBP_EXT was already performed successfully earlier
Post-processing for ACID SFW_API was already performed successfully earlier
Post-processing for ACID SFW_TREE was already performed successfully earlier
Post-processing for ACID WDR_CHECK_P13N was already performed successfully earlier
Post-processing for ACID WDR_CONFIG_CHECK was already performed successfully earlier
Post-processing for ACID WDR_EVENT_HANDLER_NOT_FOUND was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_COMPONENTS was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_DYNAMIC was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_EVENTS was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_NAVIGATION was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_P13N was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_PHASEMODEL was already performed successfully earlier
Post-import method ACID_CREATE_INCLUDE_AFTER_IMP completed for ACID L, date and time: 20080825172919
Post-import method AFTER_IMP_NROB started for NROB L, date and time: 20080825172919
Post-processing for NROB FDT_GENNRR was already performed successfully earlier
Post-import method AFTER_IMP_NROB completed for NROB L, date and time: 20080825172919
Post-import method AFTER_IMP_SXCI started for SXCI L, date and time: 20080825172919
Post-processing for SXCI BADI_DB2CCMS was already performed successfully earlier
Post-processing for SXCI BPM_SPI_AS was already performed successfully earlier
Post-import method AFTER_IMP_SXCI completed for SXCI L, date and time: 20080825172919
Post-import method AFTER_IMP_SXSD started for SXSD L, date and time: 20080825172919
Post-processing for SXSD EXT_SDL_CALLBACK was already performed successfully earlier
Post-import method AFTER_IMP_SXSD completed for SXSD L, date and time: 20080825172919
Post-import method FDT_AFTER_IMPORT started for FDT0001 T, date and time: 20080825172919
Program terminated (job: RDDEXECL, no.: 17290000)
See job log
Execution of programs after import (XPRA)
End date and time : 20080825173106
Ended with return code: ===> 12 <===
| ######################################
Date
Time
Message
MsgID/No./Ty
25.08.2008
17:29:02
Job started
00
516
S
25.08.2008
17:29:04
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
25.08.2008
17:29:04
All DB buffers of application server rambasis were synchronized
PU
170
S
25.08.2008
17:30:20
ABAP/4 processor: SYNTAX_ERROR
00
671
A
|25.08.2008 |17:30:20 |Job cancelled
Thanks
Ram -
XPRA_EXECUTION error while importing Support stack 8 in Solution manager 4
We have installed Solution managr 4.0 on Windows 2003 OS. We are trying to inport support stack 8, but we are getting the XPRA_EXECUTION error while importing SAPKW70009. Following is the error log
Short text
Syntax error in program "CL_RSOBJS_TYPE_MANAGER========CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSVERS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSOBJS_TYPE_MANAGER========CP " in include
"CL_RSOBJS_TYPE_MANAGER========CM00G " in
line 1:
"Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
"r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_RSOBJS_TYPE_MANAGER========CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_RSOBJS_TYPE_MANAGER========CP :
"Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
"r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
We have tried clearing the queue and restarting the import but it does not work.
Can anyone please help us with the same.Please, i need help. I have a problem when importing SAPKB62030 on phase XPRA_EXECUTION. This is the error:
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPKB62030, tp step R, return code
0008
What can i doing? -
Error in XPRA_EXECUTION PHASE on SAINT transacction installing BPC 7.5
Hi
I am installing Bussines Planning & Consolidation 7.5 on an Netweaver 7.01 with EHP1 (enhacement package 1) system but when I used SAINT transacction to install the ADDON for this ABAP component . First I received a message about some "conficts" between some ADDOns so I had to applied an CRT (confict resolution transport) support package to resolve the issue
But the saint transacction stopped on the XPRA_EXECUTION phase and the log message talk about some "BC-SRV-NUM" (number Range Managment) in some table values conteined invalid key number range object values
I found the 1467470 note to fix the issue , I tried to use SNOTE to implemented it but can not be implemented.
Can someone help give me some advices to this issue?
Thanks a lot for your time
RegardsHi Salman
I understand your issue because the installation guide is not enough clear.
Look
1) Once you installed the ADD-ON CPMBPC on ABAP and follow the installation guide
You have to create on ABAP tier 3 communications data users (user,admin, sysadmin) like guide says and at the end of it , you have to run UJA3_WRITE_SYS_USERS program on se38 and write:
domain windows or local group windows\bpc_user --> for example GGBIDBPC\bpc_user
domain windows or local group windows\ bpc_admin --> GGBIDBPC\bpc_admin
domain windows or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
you should use Domain windows to ensure security environment about users like password or expiration rules
2) On .NET tier when your are installing the BPC Server you have to entry at first time just one user (sysadmin) using the same format:
Domain or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
later you will prompt on next screens enter the System Administrator, Administrator, and User (user IDs), together with their passwords that were created on step 1.
The reality is just sysadmin user is used to BPC configuration on ABAP and .NET tiers
I hope this information be useful
Regards
Luis Antonio Aguirre -
XPRA_EXECUTION. TP_STEP_FAILURE, Return code: 0012
Hi,
I'm implementing support packages on a production system.
By running SAP_APPL (SAPKH60408), the spam goes brocken.
It returns the following error message :
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKH60408, tp step "R", return code
0012
Could you please help to resolve this issue.
Regards
LatifHi
I had tried as per your suggestion but we are unable to rectify the issue can u please suggest what else we can do
The error while applying support package
SP SAPKH60501
Phase :XPRA_EXECUTION
The Background Job is failing
Job Name: RDDEXECL
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server ..... were synchronize
Internal session terminated with a runtime error (see ST22)
Job cancelled
Dump Details
In ST22 Dump error
SYNTAX_ERROR
CL_GLE_ECS_BRF_ADAPTER========CP
AC-INT
Line 17:
Formal parameter "IV_ALL_REQUESTS" does not exist."
Regards
Harsha Teja -
XPRA_EXECUTION Error in OCS Package SAPKW70009
HI All,
while doing patch on netweaver 200s for BW system. i am getting below error.
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKW70009, tp step R, return code
0012
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase.
Please help me to resolve it.
Regards
GyanHi All,
I also got some error message in import logs Method Execution:
Execution of programs after import (XPRA)
Transport request : SAPKW70009
System : NET
tp path : tp
Version and release: 370.00.01 700
Program terminated (job: RDDEXECL, no.: 14224200)
See job log
Execution of programs after import (XPRA)
End date and time : 20080805142432
Ended with return code: ===> 12 <===
When I checked job RDDEXECL,It shows me :
15:08:06 Job started
15:08:06 Step 001 started (program RDDEXECL, variant , user ID DDIC)
15:08:06 All DB buffers of application server prosindia were synchronized
15:08:09 ABAP/4 processor: SYNTAX_ERROR
15:08:09 Job cancelledWhat happened?
In ST22 I also found some dumps on DDIC user:
Runtime Errors SYNTAX_ERROR
Date and Time 20.08.2008 16:30:32
Error in the ABAP Application Program
The current ABAP program "SAPLRSVERS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSOBJS_TYPE_MANAGER========CP " in include
"CL_RSOBJS_TYPE_MANAGER========CM00G " in
line 1:
"Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
"r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
So i think reason of this SP termination is job RDDEXECL termination and reason of job termination is this can short dump,Please suggest how can i solve it.
Gyan -
SAPKW70017 shows error XPRA_EXECUTION
Dear Support,
While applying SAPKW70017 it shows error.
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKW70017, tp step R, return code
0012
This is our BI Server. On XI and ECC Server i have applied without any error.
Please revert with the helful suggetion.
Regards,
AjitHi ajit,
you can solve the problem by update R3trans, tp and spam sofrware (service.sap.com/swdc) or update your kernel on your Server.
i have faced this problem XPRA_EXECUTION by update kernel with latest kernel
env :
SAP NW 7.01 EHP1
Windows intel x64 and DB2 Database
thanks
ghochi -
Error importing SP in Solution Manager System (phase XPRA_EXECUTION)
Dear community,
I have a fresh installation of Solution Manager System 7.1 (central system) in a test environment.
During post-installation I wanted to apply SP (user DDIC, client 000), but my update queue via SPAM failed in phase 23 (XPRA_EXECUTION) and I have no idea how to handle that. Error message:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-70203INSAPBSFND, tp step R, return code 0008
To check the cause of the error it is recommended to choose Goto -> Log -> Queue.
Choosing Goto -> Action Log, I find:
Error during executing the tp command 'tp XPA ALL SOL ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors', tp output:
Choosing Goto -> Import Logs -> tp system logs, I find:
START EXECUTION OF REPORTS SOL R 20120104111325 DDIC biss-labor01
START tp_getprots SOL R 20120104111325 DDIC biss-labor01
ERROR SAPK-70203INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPK-70204INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPKITL701 SOL R 0008 20120104111335 STUSER DDIC biss-labor01
STOP tp_getprots SOL R 20120104111338 DDIC biss-labor01
STOP EXECUTION OF REPORTS SOL R 20120104111338 DDIC biss-labor01
An excerpt (3 lines) from ulog:
APServiceSOL 20120104122229 RFC: tp SHOWPARAMS SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122229 RFC: tp CONNECT SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122231 RFC: tp XPA ALL SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
What I already tried:
- retry importing
- stop and start the system, then retry importing
- check for background jobs (rdd* ) that failed via transaction SM37, but there are none that have been canceled
- reset buffers via transaction /$sync
Any input, suggestions or help is highly appreciated!
Regards
SönkeHi Sönke,
it seems we are making progress at last.
I'm afraid I didn't make my suggestion about splitting items very clear. I meant to say try applying your SPAM queue in several parts splitting up the packages affected so they are applied individually.
SAPK-70203INSAPBSFND
SAPK-70204INSAPBSFND
SAPKITL701
SAPKB70207
I think default behaviour for SPAM/SAINT is to calculate the entire queue automatically based on EPSIN but you can override this behaviour and choose to split your queue into shorter ones, you simply choose carefully the last package, apply this queue, then choose the next queue and so on until you are done. There used to be special notes which had recommended split points for package queues
EDIT: I checked your link and I don't think it is helpful unfortunately.
Best regards,
Mark.
Edited by: Mark Birch on Jan 11, 2012 2:07 PM -
SOLMAN 4.0 - SP15 - SPAM stops -saplsfes
Hi all
We are running in a deep trouble now with Support pack 15 installation on Solution manager 4.0. I started the SPAM with SP15 queue and it was running fine until it started with sapkb70014.
Whats the problem with this patch? Even sapkb70013 had similar issue. Is that these patches are getting released before proper testing? Whatever, but customers are running in deep trouble with these ever long running patches.
SP15 is running for more than 36 hours now, constant increase in transport logs. We are unable to use the system for past two days. When we try to login it says ABAP error code: Error and a blank page followed by syntax error at program saplsfes. The known issues with SP15 didnt have this issue updated yet. I have opened a high priority message and waiting for SAP's answer.
Any one came across this issue? I dunno how to stop the batch job since Im unable to get into the system. And also Im worried to shut down the system to restart since transport logs are growing.
Please advice.
Thanks
SubbuHi Subbu,
we went into same troubles while implementing SP stack 15 into SolMan.
We waited for over 24 hours regarding the import of SAPKB0013.
Running
brconnect -u / -c -f stats -t SYSTEM_STATS
brconnect -u / -c -f stats -t oradict_stats
on our ORACLE DB fixed the problem and performance was very good again so the import went fine.
Thanks for the hint!!!!!
Regards,
Claus -
XPRA_EXECUTION error in CRPXRPM
Hi
In a ECC 6.0, Aix, DB2, Double Stack, I trying to install the support packages SAPK-40001INCPRXRPM to SAPK-40004INCPRXRPM, and found the following error:
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPK-40002INCPRXRPM, tp step R, return code 0008
The tp system Log is the following
File: /usr/sap/trans/log/SLOG0902.E02 08.01.2009 12:28:13
System Log Entries
START imp single E02 20090106113302 EDELANGEL sapprd 20090106113300
START DD IMPORT E02 H 20090106113302 EDELANGEL sapprd 20090106113300
STOP DD IMPORT E02 H 20090106115607 EDELANGEL sapprd 20090106113300
INFO TBATG CONVERSION OF E02 N not needed EDELANGEL sapprd 20090106113300
START MOVE NAMETABS E02 6 20090106115607 EDELANGEL sapprd 20090106113300
START tp_getprots E02 P 20090106115608 EDELANGEL sapprd 20090106113300
STOP tp_getprots E02 P 20090106115614 EDELANGEL sapprd 20090106113300
STOP MOVE NAMETABS E02 6 20090106115614 EDELANGEL sapprd 20090106113300
START MAIN IMPORT E02 I 20090106115614 EDELANGEL sapprd 20090106113300
STOP MAIN IMPORT E02 I 20090106134353 EDELANGEL sapprd 20090106113300
INFO TBATG CREATION OF EN E02 n not needed EDELANGEL sapprd 20090106113300
START EXECUTION OF REPORTS E02 R 20090106134354 EDELANGEL sapprd 20090106113300
START tp_getprots E02 R 20090106134354 EDELANGEL sapprd 20090106113300
STOP tp_getprots E02 R 20090106134532 EDELANGEL sapprd 20090106113300
STOP EXECUTION OF REPORTS E02 R 20090106134532 EDELANGEL sapprd 20090106113300
STOP imp single E02 0004 20090106134532 EDELANGEL sapprd 20090106113300
START INFORM SAP-SYSTEM OF E02 Q 20090106134532 EDELANGEL sapprd 20090106113300
START tp_getprots E02 Q 20090106134533 EDELANGEL sapprd 20090106113300
STOP tp_getprots E02 Q 20090106134536 EDELANGEL sapprd 20090106113300
STOP INFORM SAP-SYSTEM OF E02 Q 20090106134536 EDELANGEL sapprd 20090106113300
START CMDIMPORT E02 L 20090107120143 EDELANGEL sapprd 20090107120143
STOP CMDIMPORT E02 L 20090107120146 EDELANGEL sapprd 20090107120143
START MAIN IMPORT E02 I 20090107120147 EDELANGEL sapprd 20090107120146
STOP MAIN IMPORT E02 I 20090107120303 EDELANGEL sapprd 20090107120146
START CMDIMPORT E02 L 20090107120304 EDELANGEL sapprd 20090107120303
STOP CMDIMPORT E02 L 20090107120607 EDELANGEL sapprd 20090107120303
START DD IMPORT E02 H 20090107122109 EDELANGEL sapprd 20090107122108
STOP DD IMPORT E02 H 20090107122344 EDELANGEL sapprd 20090107122108
START DD ACTIVATION E02 A 20090107122347 EDELANGEL sapprd
START tp_getprots E02 J 20090107122348 EDELANGEL sapprd
STOP tp_getprots E02 J 20090107123154 EDELANGEL sapprd
STOP DD ACTIVATION E02 A 20090107123154 EDELANGEL sapprd
START imp all E02 20090107123157 EDELANGEL sapprd 20090107123156
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT E02 H 20090107123157 EDELANGEL sapprd 20090107123156
STOP DD IMPORT E02 H 20090107123157 EDELANGEL sapprd 20090107123156
START DISTRIBUTION OF DD-O E02 S 20090107123157 EDELANGEL sapprd 20090107123156
START tp_getprots E02 S 20090107123157 EDELANGEL sapprd 20090107123156
STOP tp_getprots E02 S 20090107123253 EDELANGEL sapprd 20090107123156
STOP DISTRIBUTION OF DD-O E02 S 20090107123253 EDELANGEL sapprd 20090107123156
INFO TBATG CONVERSION OF E02 N not needed EDELANGEL sapprd 20090107123156
START MOVE NAMETABS E02 6 20090107123253 EDELANGEL sapprd 20090107123156
START tp_getprots E02 P 20090107123253 EDELANGEL sapprd 20090107123156
STOP tp_getprots E02 P 20090107123618 EDELANGEL sapprd 20090107123156
STOP MOVE NAMETABS E02 6 20090107123618 EDELANGEL sapprd 20090107123156
START MAIN IMPORT E02 I 20090107123619 EDELANGEL sapprd 20090107123156
STOP MAIN IMPORT E02 I 20090107134804 EDELANGEL sapprd 20090107123156
START TBATG CREATION OF EN E02 n 20090107134805 EDELANGEL sapprd 20090107123156
START tp_getprots E02 Y 20090107134805 EDELANGEL sapprd 20090107123156
STOP tp_getprots E02 Y 20090107134900 EDELANGEL sapprd 20090107123156
STOP TBATG CREATION OF EN E02 n 20090107134900 EDELANGEL sapprd 20090107123156
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all E02 0004 20090107134901 EDELANGEL sapprd 20090107123156
START EXECUTION OF REPORTS E02 R 20090107134941 EDELANGEL sapprd
START tp_getprots E02 R 20090107134941 EDELANGEL sapprd
STOP tp_getprots E02 R 20090107140541 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090107140541 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140544 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140544 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140545 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140545 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140545 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140545 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140546 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140547 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140547 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140547 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140547 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140547 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140548 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140548 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140548 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140548 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140548 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140549 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140549 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140549 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140549 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140549 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140550 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107140550 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107140550 EDELANGEL sapprd
START CMDIMPORT E02 L 20090107152234 EDELANGEL sapprd 20090107152233
STOP CMDIMPORT E02 L 20090107152237 EDELANGEL sapprd 20090107152233
START MAIN IMPORT E02 I 20090107152237 EDELANGEL sapprd 20090107152237
STOP MAIN IMPORT E02 I 20090107152256 EDELANGEL sapprd 20090107152237
START CMDIMPORT E02 L 20090107152258 EDELANGEL sapprd 20090107152257
STOP CMDIMPORT E02 L 20090107152507 EDELANGEL sapprd 20090107152257
START tp_rm_cntl_mark E02 20090107154744 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154744 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154745 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154745 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154745 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154745 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154746 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154746 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154746 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154746 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154747 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154747 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154747 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154747 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154748 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154748 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154748 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154748 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154748 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154749 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154749 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154749 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154749 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154750 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107154754 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107154754 EDELANGEL sapprd
START CMDIMPORT E02 L 20090107155137 EDELANGEL sapprd 20090107155136
STOP CMDIMPORT E02 L 20090107155139 EDELANGEL sapprd 20090107155136
START MAIN IMPORT E02 I 20090107155139 EDELANGEL sapprd 20090107155139
STOP MAIN IMPORT E02 I 20090107155156 EDELANGEL sapprd 20090107155139
START CMDIMPORT E02 L 20090107155157 EDELANGEL sapprd 20090107155156
STOP CMDIMPORT E02 L 20090107155516 EDELANGEL sapprd 20090107155156
START DD IMPORT E02 H 20090107160629 EDELANGEL sapprd 20090107160628
STOP DD IMPORT E02 H 20090107161521 EDELANGEL sapprd 20090107160628
START DD ACTIVATION E02 A 20090107161528 EDELANGEL sapprd
START tp_getprots E02 J 20090107161528 EDELANGEL sapprd
STOP tp_getprots E02 J 20090107165818 EDELANGEL sapprd
STOP DD ACTIVATION E02 A 20090107165818 EDELANGEL sapprd
START imp all E02 20090107165821 EDELANGEL sapprd 20090107165820
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT E02 H 20090107165821 EDELANGEL sapprd 20090107165820
STOP DD IMPORT E02 H 20090107165821 EDELANGEL sapprd 20090107165820
START DISTRIBUTION OF DD-O E02 S 20090107165821 EDELANGEL sapprd 20090107165820
START tp_getprots E02 S 20090107165822 EDELANGEL sapprd 20090107165820
STOP tp_getprots E02 S 20090107170037 EDELANGEL sapprd 20090107165820
STOP DISTRIBUTION OF DD-O E02 S 20090107170037 EDELANGEL sapprd 20090107165820
INFO TBATG CONVERSION OF E02 N not needed EDELANGEL sapprd 20090107165820
START MOVE NAMETABS E02 6 20090107170037 EDELANGEL sapprd 20090107165820
START tp_getprots E02 P 20090107170037 EDELANGEL sapprd 20090107165820
STOP tp_getprots E02 P 20090107171054 EDELANGEL sapprd 20090107165820
STOP MOVE NAMETABS E02 6 20090107171054 EDELANGEL sapprd 20090107165820
START MAIN IMPORT E02 I 20090107171054 EDELANGEL sapprd 20090107165820
STOP MAIN IMPORT E02 I 20090107175403 EDELANGEL sapprd 20090107165820
START TBATG CREATION OF EN E02 n 20090107175403 EDELANGEL sapprd 20090107165820
START tp_getprots E02 Y 20090107175403 EDELANGEL sapprd 20090107165820
STOP tp_getprots E02 Y 20090107175518 EDELANGEL sapprd 20090107165820
STOP TBATG CREATION OF EN E02 n 20090107175518 EDELANGEL sapprd 20090107165820
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all E02 0004 20090107175519 EDELANGEL sapprd 20090107165820
START EXECUTION OF REPORTS E02 R 20090107175556 EDELANGEL sapprd
START tp_getprots E02 R 20090107175556 EDELANGEL sapprd
STOP tp_getprots E02 R 20090107181556 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090107181556 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181603 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181603 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181604 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181604 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181604 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181604 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181605 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181605 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181605 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181605 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181606 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181606 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181606 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181606 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181606 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181607 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181607 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181607 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181607 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181607 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181608 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181608 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181608 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181608 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181609 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181609 EDELANGEL sapprd
START tp_rm_cntl_mark E02 20090107181609 EDELANGEL sapprd
STOP tp_rm_cntl_mark E02 20090107181609 EDELANGEL sapprd
START CMDIMPORT E02 L 20090107182221 EDELANGEL sapprd 20090107182220
STOP CMDIMPORT E02 L 20090107182327 EDELANGEL sapprd 20090107182220
START DD IMPORT E02 H 20090107182541 EDELANGEL sapprd 20090107182541
STOP DD IMPORT E02 H 20090107182654 EDELANGEL sapprd 20090107182541
START DD ACTIVATION E02 A 20090107182657 EDELANGEL sapprd
START tp_getprots E02 J 20090107182657 EDELANGEL sapprd
STOP tp_getprots E02 J 20090107182833 EDELANGEL sapprd
STOP DD ACTIVATION E02 A 20090107182833 EDELANGEL sapprd
START imp all E02 20090107182835 EDELANGEL sapprd 20090107182834
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O E02 S 20090107182835 EDELANGEL sapprd 20090107182834
START tp_getprots E02 S 20090107182835 EDELANGEL sapprd 20090107182834
STOP tp_getprots E02 S 20090107182841 EDELANGEL sapprd 20090107182834
STOP DISTRIBUTION OF DD-O E02 S 20090107182841 EDELANGEL sapprd 20090107182834
INFO TBATG CONVERSION OF E02 N not needed EDELANGEL sapprd 20090107182834
START MOVE NAMETABS E02 6 20090107182842 EDELANGEL sapprd 20090107182834
START tp_getprots E02 P 20090107182842 EDELANGEL sapprd 20090107182834
STOP tp_getprots E02 P 20090107182903 EDELANGEL sapprd 20090107182834
STOP MOVE NAMETABS E02 6 20090107182903 EDELANGEL sapprd 20090107182834
START MAIN IMPORT E02 I 20090107182903 EDELANGEL sapprd 20090107182834
STOP MAIN IMPORT E02 I 20090107184855 EDELANGEL sapprd 20090107182834
INFO TBATG CREATION OF EN E02 n not needed EDELANGEL sapprd 20090107182834
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all E02 0004 20090107184855 EDELANGEL sapprd 20090107182834
START EXECUTION OF REPORTS E02 R 20090107184909 EDELANGEL sapprd
START tp_getprots E02 R 20090107184909 EDELANGEL sapprd
STOP tp_getprots E02 R 20090107185446 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090107185446 EDELANGEL sapprd
START CMDIMPORT E02 L 20090107234749 EDELANGEL sapprd 20090107234748
STOP CMDIMPORT E02 L 20090107234837 EDELANGEL sapprd 20090107234748
START DD IMPORT E02 H 20090107234955 EDELANGEL sapprd 20090107234954
STOP DD IMPORT E02 H 20090107235115 EDELANGEL sapprd 20090107234954
START DD ACTIVATION E02 A 20090107235117 EDELANGEL sapprd
START tp_getprots E02 J 20090107235118 EDELANGEL sapprd
STOP tp_getprots E02 J 20090107235922 EDELANGEL sapprd
STOP DD ACTIVATION E02 A 20090107235922 EDELANGEL sapprd
START imp all E02 20090107235924 EDELANGEL sapprd 20090107235923
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O E02 S 20090107235924 EDELANGEL sapprd 20090107235923
START tp_getprots E02 S 20090107235924 EDELANGEL sapprd 20090107235923
STOP tp_getprots E02 S 20090107235939 EDELANGEL sapprd 20090107235923
STOP DISTRIBUTION OF DD-O E02 S 20090107235939 EDELANGEL sapprd 20090107235923
INFO TBATG CONVERSION OF E02 N not needed EDELANGEL sapprd 20090107235923
START MOVE NAMETABS E02 6 20090107235939 EDELANGEL sapprd 20090107235923
START tp_getprots E02 P 20090107235940 EDELANGEL sapprd 20090107235923
WARNING: /usr/sap/trans/tmp/P090108.E02 : cant open
WARNING: : cant open
WARNING: /usr/sap/trans/tmp/P090108.E02 : cant open
WARNING: : cant open
STOP tp_getprots E02 P 20090108000115 EDELANGEL sapprd 20090107235923
STOP MOVE NAMETABS E02 6 20090108000115 EDELANGEL sapprd 20090107235923
START MAIN IMPORT E02 I 20090108000115 EDELANGEL sapprd 20090107235923
STOP MAIN IMPORT E02 I 20090108000948 EDELANGEL sapprd 20090107235923
WARNING: /usr/sap/trans/tmp/N090108.E02 : cant open
WARNING: /usr/sap/trans/tmp/N090107.E02 : cant open
WARNING: : cant open
WARNING: : cant open
START TBATG CREATION OF EN E02 n 20090108000948 EDELANGEL sapprd 20090107235923
START tp_getprots E02 Y 20090108000948 EDELANGEL sapprd 20090107235923
WARNING: : cant open
WARNING: : cant open
WARNING: : cant open
WARNING: : cant open
STOP tp_getprots E02 Y 20090108000955 EDELANGEL sapprd 20090107235923
STOP TBATG CREATION OF EN E02 n 20090108000955 EDELANGEL sapprd 20090107235923
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all E02 0004 20090108000955 EDELANGEL sapprd 20090107235923
START EXECUTION OF REPORTS E02 R 20090108001010 EDELANGEL sapprd
START tp_getprots E02 R 20090108001010 EDELANGEL sapprd
STOP tp_getprots E02 R 20090108001438 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108001438 EDELANGEL sapprd
START CMDIMPORT E02 L 20090108001753 EDELANGEL sapprd 20090108001752
STOP CMDIMPORT E02 L 20090108001910 EDELANGEL sapprd 20090108001752
START CMDIMPORT E02 L 20090108003138 EDELANGEL sapprd 20090108003137
STOP CMDIMPORT E02 L 20090108003225 EDELANGEL sapprd 20090108003137
START DD IMPORT E02 H 20090108003343 EDELANGEL sapprd 20090108003343
STOP DD IMPORT E02 H 20090108003509 EDELANGEL sapprd 20090108003343
START DD ACTIVATION E02 A 20090108003511 EDELANGEL sapprd
START tp_getprots E02 J 20090108003511 EDELANGEL sapprd
STOP tp_getprots E02 J 20090108003858 EDELANGEL sapprd
STOP DD ACTIVATION E02 A 20090108003858 EDELANGEL sapprd
START imp all E02 20090108003900 EDELANGEL sapprd 20090108003859
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O E02 S 20090108003900 EDELANGEL sapprd 20090108003859
START tp_getprots E02 S 20090108003900 EDELANGEL sapprd 20090108003859
STOP tp_getprots E02 S 20090108003921 EDELANGEL sapprd 20090108003859
STOP DISTRIBUTION OF DD-O E02 S 20090108003921 EDELANGEL sapprd 20090108003859
START TBATG CONVERSION OF E02 N 20090108003921 EDELANGEL sapprd 20090108003859
START tp_getprots E02 N 20090108003921 EDELANGEL sapprd 20090108003859
STOP tp_getprots E02 N 20090108003932 EDELANGEL sapprd 20090108003859
STOP TBATG CONVERSION OF E02 N 20090108003932 EDELANGEL sapprd 20090108003859
START MOVE NAMETABS E02 6 20090108003932 EDELANGEL sapprd 20090108003859
START tp_getprots E02 P 20090108003932 EDELANGEL sapprd 20090108003859
STOP tp_getprots E02 P 20090108004057 EDELANGEL sapprd 20090108003859
STOP MOVE NAMETABS E02 6 20090108004057 EDELANGEL sapprd 20090108003859
START MAIN IMPORT E02 I 20090108004057 EDELANGEL sapprd 20090108003859
STOP MAIN IMPORT E02 I 20090108005423 EDELANGEL sapprd 20090108003859
START TBATG CREATION OF EN E02 n 20090108005423 EDELANGEL sapprd 20090108003859
START tp_getprots E02 Y 20090108005423 EDELANGEL sapprd 20090108003859
STOP tp_getprots E02 Y 20090108005429 EDELANGEL sapprd 20090108003859
STOP TBATG CREATION OF EN E02 n 20090108005429 EDELANGEL sapprd 20090108003859
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all E02 0004 20090108005430 EDELANGEL sapprd 20090108003859
START EXECUTION OF REPORTS E02 R 20090108005442 EDELANGEL sapprd
START tp_getprots E02 R 20090108005442 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108005508 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108005529 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108005559 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108005559 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108010919 EDELANGEL sapprd
START tp_getprots E02 R 20090108010920 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108010921 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108010921 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108010923 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108010923 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108011135 EDELANGEL sapprd
START tp_getprots E02 R 20090108011135 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108011136 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108011136 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108011137 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108011137 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108011236 EDELANGEL sapprd
START tp_getprots E02 R 20090108011236 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108011237 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108011237 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108011238 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108011238 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108082958 EDELANGEL sapprd
START tp_getprots E02 R 20090108082958 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108082959 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108082959 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108083002 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108083002 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108083709 EDELANGEL sapprd
START tp_getprots E02 R 20090108083709 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108083710 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108083710 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108083711 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108083711 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108083747 EDELANGEL sapprd
START tp_getprots E02 R 20090108083747 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108083748 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108083748 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108083749 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108083749 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108101547 EDELANGEL sapprd
START tp_getprots E02 R 20090108101547 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108101547 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108101548 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108101549 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108101549 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108102346 EDELANGEL sapprd
START tp_getprots E02 R 20090108102346 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108102347 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108102347 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108102348 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108102348 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108102414 EDELANGEL sapprd
START tp_getprots E02 R 20090108102414 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108102415 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108102415 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108102416 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108102416 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108102454 EDELANGEL sapprd
START tp_getprots E02 R 20090108102454 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108102455 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108102455 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108102456 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108102456 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108102524 EDELANGEL sapprd
START tp_getprots E02 R 20090108102524 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108102525 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108102525 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108102526 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108102526 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108111030 EDELANGEL sapprd
START tp_getprots E02 R 20090108111030 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108111031 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108111031 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108111032 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108111032 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108111820 EDELANGEL sapprd
START tp_getprots E02 R 20090108111820 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108111821 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108111821 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108111822 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108111822 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108112506 EDELANGEL sapprd
START tp_getprots E02 R 20090108112506 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108112507 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108112507 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108112508 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108112508 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108115638 EDELANGEL sapprd
START tp_getprots E02 R 20090108115638 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108115639 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108115639 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108115640 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108115640 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108121500 EDELANGEL sapprd
START tp_getprots E02 R 20090108121500 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108121500 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108121500 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108121501 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108121501 EDELANGEL sapprd
START EXECUTION OF REPORTS E02 R 20090108122011 EDELANGEL sapprd
START tp_getprots E02 R 20090108122011 EDELANGEL sapprd
ERROR SAPK-40002INCPRXRPM E02 R 0008 20090108122012 CPRXRPMUSER EDELANGEL sapprd
ERROR SAPK-40003INCPRXRPM E02 R 0008 20090108122012 CPRXRPMUSER EDELANGEL sapprd
STOP tp_getprots E02 R 20090108122013 EDELANGEL sapprd
STOP EXECUTION OF REPORTS E02 R 20090108122013 EDELANGEL sapprd
The Last components that I upgrade, after a fresh erp installation were:
BI_CONT 703 to Level 4
SRM_SERVER 550 to Level 7
Thanks...Thanks...
I did not make the /usr/sap/trans as file system because the installation guide says that the sapinst by default create the directory on the central instance host.
I did a file system for /usr/sap/E02 and /sapmnt/E02, and both have space.
I did the same file systems as the qa server with the same size.
Edited by: Eydar Del Angel on Jan 8, 2009 1:15 PM
Hi the sap guys gave me a solution
In order to get ride of this problem, could you please deactivate the
following BADI implementations:
BBP_OM_BUPA_ALE
HRRCF00_DELETE_SPREL
which are assigned to the BADi definition HRALE00INBOUND_IDOC.
To do this,goto SE18 -> 'HRALE00INBOUND_IDOC' -> Utilities -> AdjustmentMultiple active implementation -> mark the two implementation
under HRALE00INBOUND_IDOC and deactivate.
Then retry the Support Package implementation.
Looking information related this solution I found the following note:
Note 900956 - HR integration BADI Activation.
https://service.sap.com/sap/support/notes/900956
My question is why this error happen in this installation?? I followed the same steps in the past and this error does not happen.
Regards...
Edited by: Eydar Del Angel on Jan 8, 2009 2:37 PM -
XPRA_EXECUTION error when importing BI Content 7.02
Hi,
i have a problem in the SAINT Queue during the import of S.P. "BI-Cont 7.02" on Netweaver 2004s.
This the Status Log:
The installation was stopped, since an error occurred during the phase XPRA_EXECUTION, which tha Add-On Installation Tool is unable to resolve without your input.
After you have corrected the cause of the error, continue with the import by choosing Continue in que queue display.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return Code: 0008
- Error message: OCS Package SAPKIBIHIZ, tp step R, return code 0008
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase. This phase can terminate due to the following reasons:
- TP_STEP_FAILURE: The system was unable to perform the XPRA_EXECUTION tp step. To see the cause of the error in the method execution log, choose Goto -> Log -> Queue.
Log file:
Execution of programs after import (XPRA)
Transport request : SAPKIBIHIZ
System : SRM
tp path : tp
Version and release: 340.15.28 700
Post-import methods for change/transport request: SAPKIBIHIZ
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Delivery Mode)
Generate D versions from DTP_0MSP7J8547WONZUUPY5APU07R (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_26HXT42SO9GE35213TB8ZO787 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_2TTK3PKPY8MRXJLTL2DAL4QS6 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_3XGBSP4WF7ZB7MWP9EWI8PNNK (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_40ZWD11GPWF22G2384YXR1HG6 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_5N9KW314IL6OXVUOWTLV3NVDJ (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_6EYQ0Z5CJO4EZUHT4NZW9WLG7 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_74J50JAZ7DBGWMYD4UOELTOD3 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_AEV2KERLQF1JFFY4G5O0355EE (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_C6UJ41HN6DGM4JT1HDZI7NS7Q (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_C983IGD063LH2U3DPW5ZPGN12 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_EK46M6ODNEHFHYJV35ZZGISNQ (R/3700 -> BWCLNT001)
The user terminated processing of objects
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Start of the after-import method RS_DANP_AFTER_IMPORT for object type(s) DANP (Delivery Mode)
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DSFO L, date and time: 20060125140529
Execute reports for change/transport request: SAPKIBIHIZ
Reports for change/transport request SAPKIBIHIZ have been executed
Start of................ 20060125140530
End of.................. 20060125140530
Execution of programs after import (XPRA)
End date and time : 20060125140530
Ended with return code: ===> 8 <===
-> BI 2004s with SP04
BWCLNT001 is the logical name (MySelf)
Can you guys help me ?
Thanks,
Guilherme Figueiredo.
Message was edited by: Guilherme FigueiredoHi Guilherme,
please open a message in the customer message system (OSS), and attach the log from the posting.
Cheers
SAP NetWeaver2004s Ramp-Up BI Back Office -
SPAM is hangs XPRA_EXECUTION Phase
Hi Gurus,
I have stucked in XPRA_EXECUTION phase. The TP
ended with return code 0008 while implementing the sapkb70012 patch for SAP_BASIS in ECC system.
SPAM is hangs XPRA_EXECUTION Phase.I see in status of Support Package :The import was stopped, since an error occurred.
Error in phase - XPRA_EXECUTION
Reason for error - TP_STEP_FAILURE
Return code - 0008
Error message - OCS package SAPKB70012, tp step R, return code 0008.
Could please Advise the Solution for the issue.
Appretiate you help.
Thanks
AnilsHi
See below is the log for error code 0008 in SAPRB70012.
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_ADMINISTRATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_CONFIGURATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_MONITOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER_MAIN" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "PRGN_AFTER_IMP_ACTGROUP_ACGR" completed for "ACGR" "L", date and time: "20080206084243"
2 EPU122XPost-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" started for "PDST_BASE" "T", date and time: "20080206084243"
3 EPU182 Post-processing for &2"TDAT" &3"PDST_BASE" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" completed for "PDST_BASE" "T", date and time: "20080206084243"
2 EPU122XPost-import method "SRT_REG_AFTER_IMPORT" started for "SRTD" "L", date and time: "20080206084243"
3 EPU182 Post-processing for &2"SRTD" &3"8A0A000A416FA34EBD449DF66C50649B" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SRT_REG_AFTER_IMPORT" completed for "SRTD" "L", date and time: "20080206084243"
2 EPU122XPost-import method "SUSR_AFTER_IMP_PROFILE" started for "SUSPR" "T", date and time: "20080206084244"
3 EPU182 Post-processing for &2"TDAT" &3"SUSPR" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SUSR_AFTER_IMP_PROFILE" completed for "SUSPR" "T", date and time: "20080206084244"
2 EPU127 Post-import methods of change/transport request "SAPKB70012" completed
2 EPU128 Start of subsequent processing ... "20080206084214"
2 EPU129 End of subsequent processing... "20080206084244"
2 EPU110XExecute reports for change/transport request: "SAPKB70012"
4 EPU111 on the application server: "DRIECCDEV"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU117 Reports for change/transport request "SAPKB70012" have been executed
2 EPU118 Start of................ "20080206084244"
2 EPU119 End of.................. "20080206084244"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20080206084244"
1 ETP111 exit code : "8"
1 ETP199 ######################################
Regards
Anilsai -
BASIS patch SAPKB64024 it stuck on XPRA_EXECUTION
Hello everybody,
I am applying the BASIS patch SAPKB64024 it stuck on XPRA_EXECUTION.
it give the error
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKB64024, tp step "R", return code 0012
I restart the import procedure but generate same error.
I have read SAP NOTE 589103 but unable to execute said program TOUCHSRC.
Job Log display :
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server SAPQAS were synchroniz
ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
Job cancelled
Please suggest.
Regards
GaneshHi Ganesh,
you can stop sap system and start sap system.
Repeat the patch application after this. This should work now.
Regards,
Deepak Kori -
Importing SAPKB62043 error stop
Hi
I installed fresh 4.7R3-x200 system on WIN2003/MSSQL platform,next upgrated to 6.4kernel stack 58, tp and r3trans are updated to latest patch levels also SPAM is upgraded to 18.
Then started applying Basis Support Packs,at this point facing problems ,it was failing at SAPKB62043 in IMPORT PHASE XPRA_EXECUTION
Could someone help me out to solve the problem?
Thanks in advance to all
Here the import log files
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKB62043, tp step R, return code
0012
Log Overview for SAPKB62043
SAPKB62043 Basis Support Package 43 for 6.20
GEN GENOVATE SAP
Generate Transport Information File (0) Successfully Completed
Test Import (0) Successfully Completed
Import Request Piece List (4) Ended with Warning
Import ABAP Dictionary Objects (4) Ended with Warning
ABAP Dictionary Activation (4) Ended with Warning
Import (4) Ended with Warning
Method Execution (12) Canceled
26.07.2005 14:10:00 (12) Canceled
26.07.2005 15:27:24 (12) Canceled
Import steps not specific to transport request
Log file: D:\usr\sap\trans\log\SAPRB62043.GEN
Execution of programs after import (XPRA)
Transport request___: SAPKB62043
System______________: GEN
tp path : tp
Version and Release: 340.16.03 640
Post-import methods for change/transport request: SAPKB62043
on the application server: GSAP
Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L started at 20050726140914
Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L ended at 20050726140915
Follow-up action AFTER_IMP_SXSD for SXSD L started at 20050726140915
Program terminated (job: RDDEXECL, no.: 14091001)
See job log
Execution of programs after import (XPRA)
End date and time : 20050726141000
Ended with return code: ===> 12 <===
===============
JOB LOG
===============
Date Time Message
26.07.2005 14:09:14 Job started
26.07.2005 14:09:14 Step 001 started (program RDDEXECL, variant , user ID DDIC)
26.07.2005 14:09:14 All DB buffers of application server GSAP were synchronized
26.07.2005 14:09:19 ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
26.07.2005 14:09:19 Job cancelledHi,
Can you please check the Package again.
It seems very new Pacakage. If the package is new you have to wait till BW SP13.
If not please download again from the Service market Place and try.
Refer the note 844007. If it is a test server go for manual correction using the note.
regards
Anand.M
Maybe you are looking for
-
How to restrict user to change original file in word document.
Hi experts, I am begineer in DMS. I am not able to understand how to restrict user to make any changes to a word document attached any DIR or any object link. Ex: I have a created a DIR attaching a word doc to equipment master. However, the user is s
-
PR to PO conversion need work flow
Hi All, We have scenario, PR will get generated from Sales order - this is already in place PR to PO will be converted through background Job. - this is already in place Suppose if any PR fails during conversion to PO---- we need to notify the user w
-
I need information ASAP on what I should do with my MacBook Pro , am I able to just give apple the money for the apple care cost and they'll fix problem
-
Flash Website Design Help!
I want to convert my website i use for my computer repair business into a full on blown out flash site. my problem is i know nothing about flash. not even the basics! i need help and resources on where i can go or do to learn the basics and turn my i
-
How to use Kerberos in IOS app?
Hi I am a starter in developing IOS apps. I just completed my app and th eonly part missing i sKERBEROS authentication. I am new and i don know anything about implementing and integrating in my application. I just heard that i need to include GSS.fra