SAPKH47028 DDIC_ACTIVATION phase
Hi,
I'm trying to patch SAP_APPL level 28 on my 4.7Ent ext 2. During the DDIC_ACTIVATION phase I got some error. On the log it mention:
View /1SAP1/CNV_C0087 could not be activated
(E- Key field KONDN-KNUMH missing. Specify maintenance status 'read only'. )
View /1SAP1/CNV_C0090 could not be activated
(E- Key field LIPS-VBELN missing. Specify maintenance status 'read only'. )
View /1SAP1/CNV_C0101 could not be activated
(E- Key field REGUH-XVORL missing. Specify maintenance status 'read only'. )
View /1SAP1/CNV_C0114 could not be activated
I couldn't find a single SAP note on this. Does anyone know how to fix this?
BR,
Eida
I found out that the cause of the problem is due to the SAP conversion tables/view (/1SAP1/CNV_CNXXXXX) which are created for the conversion project that the company did with SAP previously.
From some other system, I can see that the table was deleted from the system. I'm not sure if this the right things to do. Can anyone confirm that we can delete the conversion table/view in a system?
Please advice.
Best Regards,
Eida Hanafiah
Similar Messages
-
Error in DDIC_Activation phase for SAP_APPL Patch
Dear Friends,
I am importing several ABAP patches for my IDES 6.0 SR2 system, they are:
- SAP_APPL (SAPKH60007-SAPKH60009)
- FI-CA (SAPK-60007INFICA-SAPK-60009INFICA)
- FI-CAX (SAPK-60007INFICAX-SAPK-60009INFICAX)
The patches are in the same queue.
I have received a stop error in the DDIC_ACTIVATION phase.
It says "View VSCAUFV_CN could not be activated". Please help me resolving the problem since I am not able to process further.
Appreciate your help and reward points too.
The log file of which last few lines are pasted below :
2 ED0348XServer Usage ************************************************************
2 ED0313 Server..............|Workp|Tasks|Error|.Timesum|Objcount|ms/Obj|..KCosts|ms/KCs
2 ED0313 -
2 ED0313 ides60_IDS_00.......|....2|....2|.....|.......0|......13|.....0|.......7|.....0
2 EDO678 Parallel execution: "0" sec., Phase out time: "0" sec., Load: "1,0000000000000000E+02" percent
1 ED0301X*************************************************************************
1 ED0306 "Object Activation"
1 ED0322 End phase "001" ***********************************************************
1 ED0320XStart phase "002" **********************************************************
1 ED0306 "Final log"
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
2WEDO517X"Table" "VSAFKO_CN" was activated (error in the dependencies)
2WEDO517 "Table" "VSAUFK_CN" was activated (error in the dependencies)
1EEDO519 "View" "VSCAUFV_CN" could not be activated
2WEDO549 "Srch Help" "MGV_COVS" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVC" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVG" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNVA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNWA" was activated (warning for the dependent tables)
1 ED0301X*************************************************************************
1 ED0306 "Final log"
1 ED0322 End phase "002" ***********************************************************
1 ED0320XStart phase "003" **********************************************************
1 ED0306 "Statistics on Activated and Deleted Objects"
1 ED0301 *************************************************************************
1 EDO601XNumber of objects to be activated............: "52"
1 EDO605 Objects not activated........................: "1"
1 EDO606 Activated objects with errors in dependencies: "2"
1 EDO604 Objects activated with warning...............: "8"
1 EDO603 Successfully activated objects...............: "41"
1 EDO602 Number of objects to be deleted..............: "0"
1 EDO608 Objects not successfully deleted.............: "0"
1 EDO607 Successfully deleted objects.................: "0"
1 EDO609 Tables/views with DROP/CREATE................: "0"
1 EDO610 No. of them marked for DROP/CREATE: "0"
1 EDO611 Not marked for DROP/CREATE: "0"
1 EDO620 Number of nametabs to be deleted.............: "0"
1 EDO622 Successfully deleted nametabs................: "0"
1 EDO621 Nametabs that were not successfully deleted..: "0"
1 ED0301X*************************************************************************
1 ED0306 "Statistics on Activated and Deleted Objects"
1 ED0322 End phase "003" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 Mass Activation
1 ED0302 =========================================================================
1 ED0327 Process..................: "ides60_13"
1 ED0319 Return code..............: "8"
1 ED0313 Phase 001..................: 00:00:07 (Object Activation)
1 ED0314 Phase 002..................: < 1 sec. (Final log)
1 ED0314 Phase 003..................: < 1 sec. (Statistics on Activated and ...)
1 ED0309 Program runtime..........: "00:00:07"
1 ED0305 Date, time...............: "20.01.2008", "19:19:00"
1 ED0318 Program end==============================================================
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20080120191900"
1 ETP111 exit code : "8"
1 ETP199 ######################################This is the information which I am getting in the system--
The view to be activated must still be adjusted in the database to the new definition in the
ABAP/4 Dictionary.
Procedure
Generally the view is adjusted in the database system by the activating program itself (or
in the release upgrade by a subsequent step of the upgrade process). If this is not
successful, the view is not activated so that there are no inconsistencies between the
ABAP/4 Dictionary and the database system. -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
DDIC_ACTIVATION error while applying SAPKE60029
Dear all,
i am applying support patch of HR.
having ecc 6.0 with oracle and windows 2003
beforing applying HR patch i had upgrade spam/saint level 35
also upgrade latest kernel and all basis, aba, ap, bw patches had been upgrade.
now when i am importing SAPKE60029 to SAPKE60034 in queue
then facing a problem with DDIC_ACTIVATION phase
i restart the spam and again try to import but fid that there are some objects which had been activated with warrning and some not activated .
INCLUDE TABLE PS9999 is not active
ROUTINE EXPAND (TABLE PB9999 could not be activated)
after seeing log i check the status in se11 then i found
table PS9999 not exsist while PB9999 partialy activated.
also see notes for knowing error and others ..
but not able to get what should i have to do...
Regards
DikIts ok
every dependency is ok...
i resolve the problem with the help of HR....
just include PS9999 after creating it...then try to activate PB9999
after that activation phase has been complete sucessfully.
Regards
Dik -
DDIC_ACTIVATION Error during application of Support Pack SAPKH47007
Hi All,
We were trying to apply Support Pack SAPKH47007 and it gave us an error in DDIC_Activation Phase and when i checked the logs it gave us this error
Relationship TMFK-TDID for table TTXS does not exist
Check dependent search help S_TMFK_SETTLE
Search help S_TMFK_SETTLE is consistent
I searched and found one Relevant Note for this SAP Note Num : 625098 and it tells us to delete the following fields
Delete the fields FLG_AK_PAYM_FICA and FLG_AK_PAYM_FIAR from the table
I went to SE11 and i dont see this fields there, and even though if i see them i dont think i can delete them coz it is asking Developer Key.
Upon further checking i found that if we delete the Contents in Pat01 and Pat03 we can go ahead and redo the support packs from begining. Can anyone throw some light on this as to how safe is this?
Regards,
Ershad Ahmed.Did you read the note I gave you?
The note says:
Symptom: An error occurs in the DDIC_ACTIVATION phase when you import Support Package SAPKH47007. The DDIC activation log records the following error messages:
Relationship TMFK-TDID for table TTXS does not exist
<...>
Solution: A general solution to the problem is available with R/3 Support Package SAPKH47010. To avoid the error, import the Support Packages SAPKH47007 and SAPKH47010 together in a queue.
If you have already encountered this error, the queue must be reset and extended to include Support Package SAPKH47010. Since you cannot reset the queue from the DDIC_ACTIVATION phase using normal means, this must be done by SAP Support (Component BC-UPG-OCS).
Markus -
Upgrading EA-PS 600 to 603 By Using SAINT Error in SAINT DDIC_ACTIVATION
Hello Team,
In our Production System We have ECC 6.0 Ehp-4,but for my public sector comp[onent i have EA-PS 600,i need to upgrade it to EA-PS 604, For that i need to upgrade to EA-PS 603 and then EHP-4,First im gng for EA-PS 603 ,by using SAINT Tool im dng this task,but in ddic_activation phase im facing the following problem
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPK-603DDINEAPS, tp step A, return
code 0012...
Can any one please help me out to solve this issue,
immediate response appriciated...
Regards,
Syed.Hi,
why you are upgrading it first to EHP3 and then to EHP4 ?
I will suggest you to directly upgrade it to EHP4, for this you just need to download stack xml file from solution manager and provide that in SAINT transaction so that it will upgrade to component to 604 in one step rather than 603 and then 604.
Thanks
Sunny -
DDIC_ACTIVATION Error solman EHP1
Hi
I am updating the solman 7.0 to EHP1. I am facing the DDIC activation error and error as below. I have tried to apply the sap note no 1256384 but not success. The SAP india has suggested me to do the same manually but I am getting error as "user id locked by SAINT".
Now SAP told me to ignore this error. Can u please guide me (exact menu path) that how to ignore this error ?
Error as below:
the error can be seen in SAPAIBIIP9.SM2:
4 EDT012XActivate table "UMGSIUUC1"
4 EDT181 Key field "F19" has unpermitted type "RAWSTRING"
4WEDT135 Flag: 'Incorrect enhancement category' could not be updated
4 EDT013 Table "UMGSIUUC1" was not activated
Thanks & Regards
Vimalhello
i faced the same problem today
here is how i tackled it
saw the recommendation to import the note too late
created the transport in other system, the import was successful, however as mentioned above, the result was the same :
in se11 the UMGSIUUC1 was giving errors on F19 field when checked
So i had no choice but to try to reset the SPAM queue, it is not a pleasant job to do in DDIC_Activation phase
se16- deleted the entries in debug mode in PAT01 and PAT03 tables and SPAM queue was green
then to SNOTE and reimported the NOTE and the UMGSIUUC1was now ok
then i got the error OCS queue not empty and needed to delete the TP buffer which was showing the packages from before resetting the queue
Now the DDIC Activation phase has passed and i am hoping everything will finish smoothly -
DDIC_ACTIVATION-Support Package - Hanged
Hello all,
What exactly i can do if my support package of SAPKB70009 hanged at DDIC_ACTIVATION phase any clues from Gurus.
Cheers,
RahulRahul,
1. Check whether you have a previous backup
2. Delete the entry in table PAT01 (after copying it out)
3. Change the entry in PAT03 back to ready for import
4. You need to check in STMS import monitor that it is not in there as importing and if it is, delete it from the monitor
5. Check any cofile for entries inside it indicating it is importing.
6. Check for any batch job hanging and SM12 locks
there's probably other things that can give it grief but cannot think of them.
Then try importing the other pack.
I hope it goes fine.
Cheers
Deepanshu Sharma -
Error while importing SAPKE60024
Hi Experts!!!,
I got an error in ddic_activation phase,the error is
TP_STEP_FAILURE return code 8 step A
Then i have rerun the import again then it said the support package was imported sucessfuly.
What does this error mean ,does this have any impact on the system.
Regards,
Vamshi.Hi All,
Yeah i am using the user which has all the authorizations as of ddic or sap*, i have installed many support packages with the same user id but it now everything worked fine even now it has worked fine,but at one point i have got this error but i have reimported it then it has run successfully.
Regards,
Vamshi. -
Error at upload patch SAPKB70019
Hello everybody,
i have been trying to upload the patch SAPKB70019
but it stop at DDIC_ACTIVATION Phase with error like that
Error in phase :- DDIC_ACTIVATION
Reason for error : TP_STEP_FAILURE
Return Code : 0008
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
when i try to search for the table /1PYXXFO/SAP_PAYSLIP_____L0001 then this display the message
table not exists
So please suggest me How to activate the table
means by which name i search the table also how to continue the patch (SAPKB70019) uploading
Thanks
GaneshPlease find attached error log::
Following objects not activated/deleted or activated/deleted w. warning:
Table /1PYXXFO/SAP_PAYSLIP_____L0001 could not be activated
Table /1PYXXFO/SAP_PAYSLIP_____L0020 could not be activated
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 545
Objects not activated........................: 2
Activated objects with errors in dependencies: 2
Objects activated with warning...............: 161
Successfully activated objects...............: 380
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
In one of the below threads
DDIC_ACTIVATION ERROR SP queue SAPK-70103INPIBASIS-SAPKA70104
the solution gievn is ::
these were the structure deleted from system afterwards patches were installed successfully.
/1PYXXFO/SAP_PAYSLIP_____L0001
/1PYXXFO/SAP_PAYSLIP_____T0001
/1PYXXFO/SAP_PAYSLIP
/1PYXXFO/SAP_PAYSLIP_____L0020
/1PYXXFO/SAP_PAYSLIP_____T0020
But not sure what will be impact of doing this.
Thanks..
Mohit -
Support patch instllation problem
Hi everyone,
We are in process of applying BASIS support pacthes in production system. The process struck at DDIC_ACTIVATIOn phase while applying SAPKB70015 and 16 pathces are in queue.
No errors found also we could not reset the queue as the import in DDIC_activation phase. In DEV and quality we did not faced this error.
System details:
ECC 6.0
SQl 2005
SPAM - Version 7.00 /0037
Kernel release 700 with path 221
Updated kernel and SPAM before starting with SP applications. PLease suggest how proceed with this. ANy suggessions are much appriciated.
Thanks & Regards,
VinodHi Amber and all,
Thanks for your quick responses. I have looked at the along,Ulong under trans dierctory before i posted the query it slef. i could not find any errors on logs. However I have managed to complete the process by restarting the queue.
also increased the parallel process to acceleare the patch instllation which helped us to complete the process intime. but not sure why the intial set of BASIS patches took very longer time ( almost 10 Hrs to complete the process).
Anyway thanks again for all your time.
Regards,
Vinod -
Hi exports,
I had alredy upgraded my ECC 6.0 Ready to EHP4, know i am trying to upgrade the component ECC-DIMP using SAINT.
My OS platform is HP-UX IA and DB is Oracle.
In the SAINT queue i had put both ECC-DIMP 603 and 604, along with stack.xml
While import during DDIC_ACTIVATION phase it failed and the log file shows "tp ended with return code 12 ".
I had checked the file system and data base tables, it seems ok.
Recently i had upgrated my kernel to 117, which is the latest one.
Also i had alredy gone through all the below mention notes, and taken action as necessary
Note 822380 - Problems w/ add-on inst/upgrade to SAP NW 7.0 AS ABAP
Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Note 874471 - Additions for installing or activating ECC-DIMP on ECC 6.0
Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Note 1118803 - ECC 600 Support Packages and ERP enhancement packages
Note 1119856 - Description, tips and tricks for Attribute Change Packages
Note 1258938 - DDIC_ACTIVATION error during EhP4 installation
Please provide your valuable suggestion
Thanks & Regards
DusmantaHi,
The problem is solved after applying SAP Note 1476315 - Error in activation protocol for switch framework.
You need to implement the coding corrections of the note to your system and restart import . If the note cannot be
implemented via SNOTE, as most likely the note assistant may be locked . Please ask one of your developers to perform the changes manually via SE80/SE24
Regards
Dusmanta. -
Applying support packs SAPKB70014 on ECC6/NW7 IDES system but SPAM runs forever in DDIC_ACTIVATION phase , I syslog i have following error
Syslog
04:03:26 DIA 004 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:26 DIA 003 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:26 DIA 002 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:26 DIA 000 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:30 DIA 001 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:30 DIA 002 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:03:30 DIA 003 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:04:29 DIA 001 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:04:29 DIA 002 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
04:04:29 DIA 003 000 SAPSYS D0 1 Transaction Canceled BT 513 ( )
and
SLOG1010 has the following
TART tp_getprots PSD Q 20100308090958 TPFANNST mucr3psd 20100308090947
WARNING: System PSD. Warning. 20100308091504 :
WARNING: Background job not running properly. Function: Q Jobcount: 10054700 Status: Y.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System PSD. Warning. 20100308092004 :
WARNING: Background job not running properly. Function: Q Jobcount: 10054700 Status: Y.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System PSD. Warning. 20100308092504 :
WARNING: Background job not running properly. Function: Q Jobcount: 10054700 Status: Y.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System PSD. Warning. 20100308093004 :Hi,
From the log it says "Background job not running properly", hence please check if job RDDIMPDP is scheduled correctly. If not then login to 000 client and execute program RDDNEWPP which will schedule the job RDDIMPDP periodically which is required for support packs and transports.
Also, check if the background work process avaialble are sufficient.
Regards,
Sharath -
Hi SAP Gurus,
When I was trying to install an application support package in SAP Basis 4.7 EE, it was aborted due to TMS mis configuration and showing RED symbol in SPAM Tcode. Plz. help me in deleting this aborted package and install it properly. I configured TMS and tried to install the support pack, but failed in doing so. Plz. help.HI
If u not in any phase then simply select display/define and select queue delete.
If u r in DDIC_ACTIVATION phase u can deleted the entries from PAT01 and PAT03 tables.
Feel free to revert back
Pls provide the points if u get answer.
---venkat. -
The Add-on installation is currently in phase DDIC_ACTIVATION
Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.
Maybe you are looking for
-
My internet connection is fairly slow. When I start more than one download at a time, they appear to stall. When I start one at a time, waiting for the previous to finish, the total time is much less. How do I stack up several requests at once and ha
-
Hello Readers, I am doing a fresh install of SCM2007 on AIX5.3, Oracle 10.2.0.4. Type of install is central instance (ABAP, Java, DB on one server). After importing ABAP, sapinst proceeds to create secure store. At that point sapinst fails with the m
-
How to copy data, table rows between tables in different schema
how do I copy rows from one table in one schema into another table in another schema in same database?
-
How to Make standard fields editable
Hi, We have are requirement to make the standard fields (cost center, GL, expense type, amount) to be editable for Approver user role. Currently only Auditor role can edit some of the fields. Is this something doable using SDK? Thanks, Webster
-
Image Sequence with vertical and horizontal photos
I'm trying to use a particle emitter with image sequence to make photos appear and move one at a time. I have collected about 20 JPEGs that I numbered sequentially so Motion would read them as an image sequence. No problem there. Most of the photos h