SAPOSS ID Creation??
Hi,
I created an SAPOSS ID in central CUA system, but when i am trying to login from the OS ID i am unable to login.
What may be the problem.?
Regards
Rakesh
Hi Rakesh,
CUA is a bit tricky at times. I have often faced this problem. What happens at times is if a user is already created in CUA and is present in say child system 'A'. Now you want to create the same user in child system 'B', you add the roles, set a new password and save it.
The user will get created in 'B', however the password will not get pushed. We have to manually go in system 'B' and maintain the password.
Does the child system get an entry in UMR for the id with the roles you have assigned in the CUA system ? In the child system, does the change documents say 'new password set'?
Thank you
Abhishek
Similar Messages
-
Creation of destination to SAP failed. Could not copy SAPOSS in SDCCN t-cod
Hi experts,
i am trying to generate rfc destination after entering SDCCN transaction when i click create destination to SAPNET R/3 Frontend getting an error as " Creation of destination to SAP failed. Could not copy SAPOSS"
can any one explain how to resolve it
Thanks&Regards
KeesaraSee [Note 763561 - Service Data Control Center (SDCCN) - FAQ|https://service.sap.com/sap/support/notes/763561] -> Question 8.
Regards,
Nelis -
Fields in Creation of free goods VBN1
hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
GhassanHi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore -
Account determination error - in creation of invoice
Hello experts,
i have an error in creation of invoice, after( pgi post goods issue)
will you please help me out to solve this error.
thanks & Regards,
yogesh rainahello sir,
After going throuth this path it shows no gl account in account determination chart
as below
Condition type Message Description
ZPR0 123 Access KOFI not carried out (initialized field)
Access Message Description
10 123 Access KOFI not carried out (initialized field)
20 121 No G/L account found in Account determination type KOFI
30 123 Access KOFI not carried out (initialized field)
40 121 No G/L account found in Account determination type KOFI
50 121 No G/L account found in Account determination type KOFI
60 123 Access KOFI not carried out (initialized field) -
Automatic PO creation of free text PR
Hi!
We have all our PRs in free text since we are not yet using material master. One of our purchase organization will only order from one vendor and they will enter that vendor and price in the PR. Is it possible to create a PO automatically from that PR without a material or source list?
Sincerely
AndersHi
Thank you very much. Is it possible to restrict the automatic creation to a certain purchase organization?
If I understand you right:
1) Create PR with item category D Service
2) Activate automatic PO creation in ML91
That will create POs for all PRs created as a service?
Sincerely
Anders -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Issue in creation of control cycle
Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshots.
Any pointers will be highly appreciated.
This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
Hope that I will get any pointer in EWM forum.
http://scn.sap.com/thread/3609441
http://scn.sap.com/thread/3610822
With Regards,
MalayHello Malay,
Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
If it is a some custom development, your ABAPer can help you on the logic behind it.
Else, Let us know.
Regards,
Sathish -
Issue in Creation of XML file from ABAP data
Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
- <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
<Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
<Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
<Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
</Header2>
</Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto -
What are the mandatory fields while creation of material master in differen
what are the mandatory fields while creation of material master in different views?
Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram -
BADI for changing fields during Creation of BP in CRM
Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom -
Error in creation of purchase materials/Goods receipt against PO(FI-MM)
Hi All,
While processing FI - MM integration iam facing below errors,request to guide me with same
1) While creation of purchase materials
Valuation class 7920 not allowed for material type Raw material Message no. M3180
Diagnosis
The combination of values you have entered is not defined in the system.
Procedure
Check your entries, and choose a valid value or combination of values with F4.
I have crossed checked in t code OMSK valuation class 7920 exists.
2) Goods receipt against PO:
Number range for trans./event type WE in year 2014 does not exist Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2014 for the transaction/event type WE.
Procedure
Contact your system administrator.
in second case i have maintained number ranges in OBA7,OMBT,still iam facing with the same issue
Regards
SantoshHi Dev,
Thanks for your reply...yea i have done the ground work before posting this query
but bitt confused with the post i have come across..
Problem was occurring due to the wrong updating of raw material instead of finished goods in MM01 (CREATION OF PURCHASE MM)
however i have over come my 2nd issue,hopefull will over come my 1st issue also
Thanks a lot
Santosh -
Hi SDN,
Im trying to create Generic Data source of View Method. I wanted to create View on BSID ( Closed Customer Invoices) and BSAD ( Open Customer invoices) Tables, But while creating its giving error as "THERE IS NO RELATION BETWEEN THE TABLES" I want to know how to create Relation Between the tables. Both BSID & BSAD are standard tables, so we cant make any changes.
Please let me know the procedure to bulid Rlation between the tables.
Regards
SujanHi Siva,
You have to give relation between these two tables in tab "Table/Join Conditions".
Creating Views:
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
View creation fr generic extraction
Hope it Helps -
Automatic TO creation and confirmation for a Material document
Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like Auto TO = 1,
AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total: 17, TO created: 0, Errors: 17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2 -
Office 2013 latest update broke new profile creation on all network computers
Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support
Maybe you are looking for
-
Hi Expert, IN ALV report using RESUE_ALV_GRID_DISPLAY . I want to sort the second field of ALV output . In this function module RESUE_ALV_GRID_DISPLAY using event PF_STATUS . so can u tell me how sort the second field . Regards Bhabani
-
i am available for phone upgrade and would like a new phone but do not want to lose the plan i currently have, which includes unlimited data (i got it before verizon stopped it). does anyone know how to upgrade phone, and not change plan?
-
DB Adapter : How to limit number parent records in select query.
Hi All, I am querying a master-detail tables from a database. I want to limit the number of parent records to 15. Ex: Resources is parent table. It has two child tables "Skills" & "PersonalDetails". Resources table has 1 to many relationship with abo
-
I am terrified to install pse 7.0. over 3.0 Help?
I have 17,500 pix in pse 3.0 & only 2 creeations. I really don't do a lot but edits, prints & edits for other people. I understand that pse 7.0 does not support jpeg format. When & IF I install 7.0, what do I need to watch out for? Can I run 2 ve
-
Output determination for outbound Idoc WMMBXY
Hi, I need to send Idoc only when material movements with certain types are posted. The problem is that standard condition record for application ME does not contain field BWART. Did you manage to extend it? Kind regards, Radek