Sapscript transport to another client using SCC1

Hi All,
I have made some changes in sapscript which is already present in the system,
So the new request has been generated in D100
Now I want to test that sapscript output in D120 which is test client.
We give atttribute value for the request which we need to transport to Quality.
now to transport the sapscript to D120 from D100 through SCC1 Tcode, before transporting it, Do I need to give the attribute value to the request ????
thanks in advance
rgds,
Madhuri

Hi Srekanth,,
Thanks for the reply . I know the procedure to transport that. But my question is whether I need to gove attribute value before transporting using above steps?
Because, the procedure here is to provide the attribute value while transporting it to Quality from development is MUST.
So I just had doubt that, while using SCC1 method to transport to Developement only but another client, do I need to provide attribute value?

Similar Messages

  • Transfer a table with data from 1 client to another client

    Hi experts please focus on this issue.  what is table maintainance generator? what is the main advantages of it.
    how can we transfer a table with data from 1 client to another client.
    Thanks  in advance
    vamsi.

    Table maintenance generator can be generated via se11 on your table.
    The advantage is that the table can manaully be updated via SM30.
    If you want to transport to another client the table content, I think you can :
    - Generate a transport request in SM30 ( Transport button)
    - use SCC1 to transport from a client to another.
    Regards,
    Erwan

  • Bank master data changes not getting tranported to another client

    Hi all
    While i am making changes to the bank master data, they are not reflected in the transport to another client.
    Please let me know how to do this.
    Thanks
    ES

    Hi
    While creating the house bank , i created the bank master using the create button.
    This was saved in the transport request and moved correctly through the transport.
    Now i find that the description etc. to be changed in FI02. I have done the changes.
    These changes when transported do not get reflected in the new environment.
    Please let me know the reason.
    Thanks & Regards
    ES

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

  • Sapscript transported with SCC1 activated but still old load-version active

    Hello all,
    i am encountering a weird thing.
    A sapscripts has been changed in client 100. Testing must be done in client 200. Client 200 is closed for customizing, abap etc. Activating of the sapscript in client 200 therefor is not possible.
    For testing purposes the changed sapscript is transported to client 200 using SCC1. Using SCC1 indicates that the sapscript is changed in client 200. Checking SE71 in client 200 also shows that the sapscript is changed (status: Active - saved).
    When testing however still the old version of the sapscript is used. When debugging i can see that an old load is used. So although SE71 (in client 200) indicates that the changed sapscript is activated still an old load-version is used.
    Does anyone know what causes this and how it can be fixed ?
    Thanks !!!
    Ad

    Hi,,
    These program will help you.
    RSTXR3TR - To transport form with transport request   - use EXport and import parameters.
    RSTXSCRP - To transport form without transport request
    RSTXTRANS - To transport standard text
    Thanks,
    Anitha

  • Client copy using SCC1

    Dear friends
    I have a bunch of requests, need to go for client copy using SCC1,
    Using scc1 only once request can be copied, is there anyother way to copy a bunch of request using SCC1/or other tcode at one go
    Regards
    Kiran

    Hi,
    you  use SCC1  can transport more than one request,
    at the field of the "transport request" , you use  F4 ,then pop up "select request/task" sub window,  then you can selecet your own request, or input several request.
    Olivia Yang

  • Transport on client to another client

    Hi Guru's
    how to transport configuration settings one client to another client or production client, which tools we can use for transport,
    thanks in advance

    Firstly you configure your changes / settings. Save it.
    On the menu bar itself, under the first heading option of TRANSPORT is itself provided. Check the menu bar and search for TRANSPORT function.
    Use the TRANSPORT function. A pop up box asks for the details and specific name of the transport request.
    Secondly, go to SE10, whereby check for all the tasks transported; i.e. check all the option boxes. The options are - Customising Requests, Workbench Requests, Transport Copies, Relocations.
    Check all.
    Go for the DISPLAY button of this first page of SE10.
    It displays all of the requests sent.
    Then the specific name you provided, that very request would be displayed, along with others, in blue. Single click, which selects it. A cursor like mark is there.
    Go for the TRUCK button just up ahead, below the caption of the page in blue.
    Hit it and and try refreshing it to ensure it has been transported. Successful execution shows a tick mark alongside your request.
    Assign points.

  • Transport of Table entries to another Client.

    Hello All,
    I have a case where a Custom Issue resolution program has been created. We use this interface for logging support issues internally, and the facility for creating the attachments is also provided.(SU53 screens etc). With an onset requirement of System copy, i would like to save these Table data as all the issues are logged in the Issue tracker tables along with attachments.
    Can any one let me know how to safegauard this data and save it from wiping out due to system copy.
    The tracker is in QTY system and it is having 3 clients. 100,200,300. We are trying to perfrom the system copy on only 100 client and export 200 and 300 and reimport after system copy. So is there any way to transfer this data to 300 and then safely put it bvack to 100 ???
    Thanks for tyhe time and suggestions.
    Any suggestions would be rewarded accordingly.
    Br,
    Sri

    Hi Sri,
    If all data you want to save, is stored in Z- or Y-tables, you can always use a normal transport to save the entry's. Thereby it is not necessary to save the tables in another client, that afterwards again is exported, reimported, and then transport the tables back to old client.
    In short, you can do the following:
    1) Create a new transport request
    2) Add the tables to be saved in the transport request.
    3) release the transport
    4) Do the system copy
    5) Add the previous transport to the importqueue after the system copy.
    6) Import the transport into your (new) client 100.
    I hope this short guideline helps you in usable direction.
    Regards
    Rolf

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Query regarding transport of customizing data to another client

    I have some queries related to transport of workbench and Customizing data to another client. As I am new to SDN forum, I am not sure if this is the right forum to post my query. Kindly let me know.

    Frankly, I wasn't even aware of the "Software Logistics" subforum for Netweaver. It is not frequented much, but seems to be the perfect home for questions about the CTS (that are not related to ABAP development at the same time, e.g. object dependencies).
    So, thank you too
    Thomas

  • CHARM error - No Target system for Normal transport generated from another client

    Hi Gurus,
    This is regarding normal change. We have two clients in development. (Workbench and Customizing)
    We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
    But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
    I attached some screenshots related to this.
    Can you please help how to add a target system for another client of development ?
    Regards,
    Salman

    yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

  • Using Search Help from another client?

    HI guys,
    I have a requirement where I have to use a search help available in another client in one of my input parameters on a selection screen.
    My report is in SRD system but the search help is in ECC.
    The search help is actually PRPM <== Matchcode for WBS elements
    ...Is it possible to do so?
    I hope you guys can guide me . Thanks guys!

    Thanks guys
    Well, the reason being...they want to use PRPM because they would like to allow users to search for the WBS element as well as filter by Person Responsible.
    Currently, I'm doing it like this
    CALL FUNCTION 'BBP_GET_BACKEND_SYSTEMS'
        TABLES
          et_logical_systems = lt_logical_sys
          et_messages        = lt_logical_msg.
      IF lt_logical_msg IS INITIAL.
        READ TABLE lt_logical_sys INTO ls_logical_sys INDEX 1.
        IF sy-subrc = 0.
          MOVE ls_logical_sys-logsys TO lw_logical_sys.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'RFC_GET_TABLE_ENTRIES'
        DESTINATION lw_logical_sys
        EXPORTING
          table_name = 'PRPS'
        TABLES
          entries    = lt_entries.
      IF lt_entries[] IS NOT INITIAL.
        LOOP AT lt_entries INTO ls_entries.
          ls_wbs-posid = ls_entries+11(24).
          ls_wbs-post1 = ls_entries+35(40).
          APPEND ls_wbs TO lt_wbs.
        ENDLOOP.
    *       F4 for WBS pop up.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield     = 'POSID'
            window_title = text-012 "WBS Element
            value_org    = 'S'
          TABLES
            value_tab    = lt_wbs
            return_tab   = lt_return_tab.

  • Transport sap query from one client to another client

    Hi,
    how to transport the sap query from one client to another client.
    Moderator Message: Basic Question
    Edited by: kishan P on Sep 15, 2010 3:39 PM

    use report "RSAQR3TR"
    Moderator Message: Do not answer such basic questions
    Edited by: kishan P on Sep 15, 2010 3:44 PM

  • Transfer data in the Ztable from one client to another client in a same ser

    Hi all,
    How can i transfer or move data in the Ztable from one client to another client in a same server .
    Thanks
    Ajay

    hi,
    create a transport request (Workbench type) and add the following line into the transport request:
    R3TR TABU name_of_table
    save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
    When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
    hope this helps
    ec

  • Unable to transport infoset /SAPQUERY/HR_ADM using program RSAQR3TR

    I am trying to export the SAP infoset /SAPQUERY/HR_ADM via program RSAQR3TR using the following settings:
    Selection of Transport Actions - set to Export
    Selection of Transport Options - Transport InfoSets selected
    IMP02 - REPLACE
    InfoSets - /SAPQUERY/HR_ADM
    When I execute to generate the transport I get the following in the export log
    F no object found.
    I am trying to add some additional fields to this infoset so I can pull in some org management data but I cannot seem to export it via a transport.

    one client
    SQ02>Select infoset>click on transport button.
    select export option
    select infoset radio button and enter infoset name
    deselect at the end delete after transport.
    same process for query also.
    This process generates transport request.
    go to another client
    sq02--->select infoset -->click on transport button
    select import option
    select infoset radio button and enter infoset name
    deselect at the end delete after transport.
    enter transport request at the end above delete after transport option
    same process for query also
    iinputs given by Usha (Team Member)   SDN

Maybe you are looking for