Satellite A200 - Flash drive has stopped working

I can't get my flash drive to work anymore. I had to uninstall it a while ago because people were filling up my computer with pictures and the only way that I thought that I could get them to stop was to uninstall the flash drive, well now that I want to use the drive I cant get it to work, pretty screwed up, huh.
Since then the person that was using my computer that was filling it up has bought their own computer so they won't be using mine anymore. I need to get my flash drive installed again.

Hello
I found it finally.
Try please with Texas-Instruments-FlashMedia-Driver-2.0.0.7

Similar Messages

Satellite P300: Display Driver has stopped working using external monitor

I have a number of these Satellite P300 PSPCCA-OC201Y and recently bought external monitors for them.
Since then we seem to be getting "Display Driver has stopped working and has recovered" messages, then after about 5 of these, it crashes.
Starting with one machine, I have updated display drivers, bios was current, all to no avail.
I then did a complete system restore back to original. Has not solved the problem.
Any ideas?

hi Keven Dickenson,
as you said you restored the system and still there is no way to get things work it may be a hardware issue...
i my opinion you should consult a servicepartner to check this out...
is there any of the machines working with the external monitor at all?
if none of them is able to connect to ext. display maybe your installation has a problem or the monitor is faulty...
try it with another monitor and recover one system to factory installation....

Satellite A60-652: ati2dvag driver has stopped working

Hello,
Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
Toshiba SA60-652
ATI MOBILITY RADION 7000 IGP
ati2dvag driver (6.14.10.6430)
Windows XP (SP2)
AVG virus scan
Hitman Pro anti-spyware
ATI hydravision installed but never used :-/
Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
Please can you help me?
If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
Thanks!

Thank you for this answer,
I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
Thank you for your help
Jeroen

Satellite X200-15K - Flash Cards has stopped working

Hi
I have a Satellite X200-15K with Vista Home Premium.
The laptop is two week old, and all of a sudden every time the laptop startup, I get the following message:
"Flash Cards has stopped working"
What can I do to fix this?
thanks
Leon

Hi
Try please with Start-All Programs-Toshiba-Utilities-Restart Flash Cards.
Hopefully you will be able to use Flash cards again.

Intel display driver has stopped working properly, distributed by Lenovo

Toshiba Satellite L355-S7915 with Windows Vista Home Basic SP2 32-bit: Keep getting "Intel display driver has stopped working properly and has recovered" when turn on computer or log on with new user. Driver version is 7.15.10.1829. This is more of an annoyance, which I can enter through and continue, but I would like to get the messages to stop. Any ideas? Thanks.

Me too, only I am using a desktop through e machines with an Intel 82945G Express Chiplet Family. And my pc just crashes and it is getting very annoying! for the longest time Vista couldn't provide a solution and today is sent my to Lenovo. I may be out of touch with the tech world but to my understanding I don't have anything "Lenovo" unless thats the new fancy name for Intel. But I can't seem to find a solution for this problem and am sick of it! Any advice? thanks and happy holidays!

HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Ever seen the error "ialmrnt5 display driver has stopped working normally"?

Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
THANKS!

Hi,
It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
Regards,
Zuriel

I use chrome on windows. Every time I am on Facebook and I am trying to play a game I get a message that says flash player has stopped working. how do i make it work?

I use chrome on windows. Every time I am on Facebook and I am trying to play a game I get a message that says flash player has stopped working. How do i make it work?

Hi juderocks14,
Please first take a check with the other Players and see if they could play the MP4 file normally. If it can't be played, which means it might be corrupted. You may ask at the Bandicam side, or save the files again.
If issue insists, take a try with the Troubleshooter (For Windows 7, 8 and 8.1):
Open the Windows Media Player Settings troubleshooter
Fix Windows Media Player video, and other media or library issues
Or you may try to turn Windows Features on or off to reset Windows Media Player:
Turn Windows features on or off (Before turn it on again, please remember to reboot first)
More reference:
What happens if I turn off Windows Media Player?
Best regards
Michael Shao
TechNet Community Support

Keep getting a message over and over that Adobe Flash Player has stopped working.

Keep getting a message over and over that Adobe Flash Player has stopped working. Uninstalled and then reinstalled. Did not help.

Hi ebombardi,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
Hopefully this helps!

I get the error "adobe flash player has stopped working...

I get the error "adobe flash player has stopped working...something about a data execution.... Can someone tell me why this happens? Would appreciate if you email me at [removed] because I don't visit this site often. Thank you

This is a public forum; please do not post your email address or other private data! You will get an email notification if someone replies to your topic.

Adobe flash player has stopped working how to rectify please help

adobe flash player has stopped working how to rectify please help

Can you please tell us your operating system and browser version? In addition, please try going to this page to see if Flash Player loads and reports its version.
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

Flash Player has stopped working...over and over again!

I get this message whenever I try and watch a video, same message for any page that uses flash, same message no matter which browser I'm using. This problem began with version 10, and I was using older versions of Flash Player until the other day when it would no longer work due to security issues--the message was that the older version of flash would no longer work...I needed to update the player. So, I did, and we're back to the same problem of Flash Player has stopped working message popping up over and over again. It doesn't seem to be the browsers since I get the same message in all of them. Possibly it is the hardware acceleration, but the two pathways to disabling hardware acceleration don't work. When I try to see the current version (so I can right click and get to settings), the version won't show. The other strategy, right cliking on the video, also won't work because the video won't show after Flash Player has stopped working. My graphics card is a Radeon x1950, and I'm running 32 bit Vista Home Premium. There is a ton of information on line about dealing with a balky flash player, but nothing that seems to address this problem. Any help will be appreciated. Thanks in advance. RAS
PS, sorry, I wasn't paying attention and first posted this in "installing flash player."
One more thing....when I go to Flash Player Find Version page, the video does not show up, nor does the version....two big blank spaces. But Flash Player is installed.

I replied over on your other post.
What browser are you using that is giving you the blank spaces on the versions page?

Flash Player Has Stopped Working!

All of a sudden, flash player has stopped working on my computer. I have a 64-bit PC, running Windows 7. Flash was running perfectly one day; the next it was not. Hasn't worked since. I've tried downloading the latest version and even installing an older version. Still does not work! (No changes or additions were made to the computer to cause this problem.) Any ideas as to what might be going on and how to fix it? I've done all I know how to do.
Ron.

All of a sudden, flash player has stopped working on my computer. I have a 64-bit PC, running Windows 7. Flash was running perfectly one day; the next it was not. Hasn't worked since. I've tried downloading the latest version and even installing an older version. Still does not work! (No changes or additions were made to the computer to cause this problem.) Any ideas as to what might be going on and how to fix it? I've done all I know how to do.
Ron.

3 weeks after installing Yosemite Flash Player has stopped working

Hi Apple Community,
Is anyone else experiencing this problem?
I installed OSX Yosemite about 4 weeks ago, no problems until now.
Just this week Flash Player has stopped working on an education site I belong to.
The college say there's no problem at their end or for the other students.
I am using Chrome which I understand updates Flash Player automatically; has there been an update this week or something that might have caused this problem?
I have tried every suggestion I can find on the internet:
- uninstalling Flash
- tried using Firefox, Chrome, Safari and Opera
- installing the latest Flash
- Rebooting
- checking Flash is installed (it is)
Is there anything else I can try?
Or is Flash simply not compatible with Yosemite now?

Hi ...
No problems with Flash on Safari 8 with Yosemite here so try testing with Safari.
First, make sure Allow Plug-ins is selected in Safari > Preferences > Security
Then from your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Then delete the cache. Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that doesn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

HD 5770 HAWK: ati2dvag display driver has stopped working normally

I keep crashing to desktop with an error dialog "ati2dvag display driver has stopped working normally" while playing Trackmania United. The crash is into a 640x480 4-bit color desktop from 1920x1080 32-bit. I updated to latest drivers for the video card and bios, and I am not maxing out my card when playing this game, it is fairly average. I don't get this error playing other games on higher settings. This behavior is fairly consistent. Additionally in TMU I keep having saturation and contrast flactuations: saturation loops between highly saturated to barely saturated and then repeates over about 30sec-1min. The looping is very smooth. Any help in resolving this issue is appreciated. Thanks
My setup:
Windows XP 32-bit
MSI R5770 with driver 8.712.0.0
ASUS P7P55D-E Pro LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor
COOLMAX CUG-700B 700W ATX12V v2.2 / EPS12V SLI Certified CrossFire Ready
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL x 2=8GB total

Quote from: hd5770newb on 26-April-10, 08:52:57
Well, any window I have open on the desktop, iTunes, Firefox, IE, etc when I move that window around, or if I resize it, the content inside that application window is repainted very sluggishly. I would say it takes about 1/8 to 1/4 of a second to redraw. With iTunes I can see the repaint take maybe 1/2 second from top to bottom.
This happens at any time I am in the desktop.
That sounds like there's something not right with the graphics drivers.
Also, check your monitor refresh rate is set right.
How about testing with some older drivers to see if there's any change. Either use the ones from the CD that came with the graphics card or use the ones in this >>link.<<
A useful utility to remove old parts of drivers is Driver Cleaner Pro. You might want to give it a go if you choose to try other drivers. Available >>here.<<

Satellite A200 - Flash drive has stopped working

Similar Messages

Maybe you are looking for