Satellite A200: Modem has an error 633: already in use or is not configured properly

My notebook is A200-FE0.
When I tried to make a dial-up connection, there is an error window says:
"Error 633: The modem (or other connecting device) is already in use or is
not configured properly".
When I test my modem by clicking query modem on the Diagnostics tab in the modems tool in
Control Panel, the modem responds normally and appear to be working
correctly.
When I test my modem by using the Toshiba diagnostic tools, it shows "pass" and I canhear the dail tone too.
I tired to uinstall and reinstall the driver twice.
But I just can't make a dial-up connection and keep getting the error 633. I am really upset about it.
Please help me! Thank you a lot!

Thanks for the hint.
I tried this method too. I am using windows vista home premium. I can't find the files named telephon.ini and tapiini.exe in my computer.
I noticed that this method is only for windows 98 and windows ME.

Similar Messages

Error 633: The modem (or other connecting device) is already in use or is not configured properly.

Hi all,
I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
[4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:315:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:315: LoadPortsList2
[4724] 06-01 20:01:56:315: GetRasPorts
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:315: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=603
[4724] 06-01 20:01:56:316: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=0
[4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:317: LoadPortsList=0
[4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:317: Reading media group "serial"
[4724] 06-01 20:01:56:317: New link format
[4724] 06-01 20:01:56:317:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:317: Port=COM17
[4724] 06-01 20:01:56:317:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:318: Port configured
[4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:318: Reading device group "modem"
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
[4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: GetPbkAndEntryName
[4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:56:318: IsPublicPhonebook=0
[4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: IsVirtualizationNeeded: return value = 0
[4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:319:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:319: LoadPortsList2
[4724] 06-01 20:01:56:319: GetRasPorts
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:319: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=603
[4724] 06-01 20:01:56:320: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=0
[4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: LoadPortsList=0
[4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:322: Reading media group "serial"
[4724] 06-01 20:01:56:322: New link format
[4724] 06-01 20:01:56:322:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:322: Port=COM17
[4724] 06-01 20:01:56:322:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:322: Port configured
[4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:322: Reading device group "modem"
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:322: DuplicatePhoneNode
[4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
[4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
[4724] 06-01 20:01:57:690: DwEnumEntryDetails
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: IsVirtualizationNeeded: return value = 1
[4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
[4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
[4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
[4724] 06-01 20:01:57:690: WritePhonebookFile
[4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
[4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
[4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:691: IsPublicPhonebook=0
[4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: IsVirtualizationNeeded: return value = 0

Hi,
We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
After that, make sure its driver was upgraded to be latest.
Roger Lu
TechNet Community Support

Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

Apple will repair or replace at its discretions, parts found to be defective in materials or workmanship.
You will have to discuss whether your history warrants a complete replacement with the folks at the Genius Bar.
I do not speak for Apple, but it sounds to me like you have been unlucky, but not unlucky enough (or have spent so much time with your MacBook in the shop) to warrant a complete replacement.
You have not provided any details of what the faults were or what was replaced. If they replaced the motherboard, you already got a new computer -- because everything except the drive and the display is on that board.

I unplugged a USB data device without ejecting it properly via 'Finder'. Now whenever I plug in the device I received an error message stating that the 'disk was not ejected properly

Now when I plug in the device I receive an error message stating that the disk was not ejected properly & that next time I connect the 'disk', MAC OS X will attempt to repair any damage to the information on the disk.
It has not repaired.
The data I am trying to import is photos & even when I change to a different SD card I receive the same message.
I am a recent convert from Windows and am new to the MAC way of things.

You can repair the SD card using Disk Utility.
I suggest you copy the photos from your SD card, if you haven't done so already, before using Disk Utility to repair your SD card.

"Your server is not configured properly or your search query has ..."

Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...

You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

I want to change my primary email on Apple ID... but it says I can't use email already in use but its not my alternative email - it may have been in the past - any ideas?

I want to change my primary email on Apple ID but it says I can't use email already in use but its not my alternative email - it may have been in the past - any ideas?

I don't believe Apple lets you delete old accounts. They also will not let you merge them.

Error message when Database details are not configured properly

Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
Praveen

Praveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun

Satellite A200 and iTunes 2131 error

Hello, new to the forums here.
I did a search and couldn't find anything current on the 2131 error I'm getting from Itunes with regards to burning CD-Rs. I understand the Dell computers using the same optical drive have a patch, just wondering if one is available for my Satellite A200-03V?
Thanks in advance.

Hi, I am wondering if someone can help me with the problem above but with a twist in that the laptop I have is a PCNextDay with a TSSTcorp CDDVDW SN-S082H inside.
I am getting the same 2131 error in itunes as the first poster and wonder if there is a firmware update available for the S-082H - i saw somewhere else there was an update for the L632H and hoping for similar. The link in the reply above mine allows you to enter in your laptop details for a Toshiba machine but I cannot find any actual details on the device itself.
Sorry if I am missing something but I would greatly appreciate it if someone could point me in the right direction as currently the only option I have is to use expensive CRRW (particularly expensive in Norway!) rather than CDRs for burning music cds which then dont play in my car anyhow.
In my searches for something on this I have also seen that Samsung have a CDDVD writer with the same product code (at least the SN-S082H) so wonder if this is a shared development (probably) and if that means I can use their firmware (maybe risky?).
Grateful for any help. Thanks!

Satellite A200 screen has turned 90 degrees

I've got Satellite A200 and screen has turned 90deg .
Can anyone tell me how to turn it back please

What is the model number of your laptop? (PSAxxx-xxxxx)
Try pressing CTRL + ALT + UP ARROW

Socket Error: Address already in use

Hello all,
I'm trying to get the Trac bug tracking system installed on my system(running snow leopard). After quite a bit of tinkering I've managed to install Trac, but as of now, its a standalone entity. I am trying to get this linked to the apache webserver, but having no success. Has anybody done this before? I haven't used unix to this level before and so am struggling with that as well... any info on this is much appreciated.
One of the instructions to test run Trac as a standalone component was using this command tracd --port 8000 /path/to/myfolder (according to installation instructions at http://trac.edgewall.org/wiki/TracInstall). I stopped it using Ctrl-Z and now when I try to run it again, get the following message and error:
Traceback (most recent call last):
File "/usr/local/bin/tracd", line 8, in <module>
loadentrypoint('Trac==0.12', 'console_scripts', 'tracd')()
File "build/bdist.macosx-10.6-universal/egg/trac/web/standalone.py", line 290, in main
File "build/bdist.macosx-10.6-universal/egg/trac/web/standalone.py", line 257, in serve
File "build/bdist.macosx-10.6-universal/egg/trac/web/standalone.py", line 109, in _init_
File "build/bdist.macosx-10.6-universal/egg/trac/web/wsgi.py", line 231, in _init_
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/SocketS erver.py", line 400, in _init_
self.server_bind()
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/BaseHTT PServer.py", line 108, in server_bind
SocketServer.TCPServer.server_bind(self)
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/SocketS erver.py", line 411, in server_bind
self.socket.bind(self.server_address)
File "<string>", line 1, in bind
socket.error: [Errno 48] Address already in use
Can somebody please guide me to fix this?
Message was edited by: capemacuser
I realize that closing the terminal window "frees" the socket. But, is there something else that I can do while stopping the running application to ensure that the socket also gets "freed"?

Control-Z does "stop" the process, but it doesn't kill it. Use Control-C to do that. Then, you may have to wait a couple of minutes for the OS to free up your socket until you can try again.

Error: Address already in use - on loading publisher portlets

Hi Guys,
We get the following error msg when we access our portal homepage (which contains a set of publisher portlets: Error details: OKHttpException - Exception occured while processing HTTP request.
Request processing stage was [1 - Trying to establish a socket connection to the remote host.]
Bytes sent: [0]; Bytes received: [0]
Error description: [Address already in use: no further information].
I'll appreciate if anyone has come across this before and can give a pointer as to what is causing it and how it can be fixed. e.g. What address is already in use? BTW, the error seem to occur very infrequently; as in occassionally, and when one refreshes the page, the content items are then rendered ok. Any clues will be greatly appreciated. Thnks.
Edited by obkalu at 11/16/2007 12:53 PM

Control-Z does "stop" the process, but it doesn't kill it. Use Control-C to do that. Then, you may have to wait a couple of minutes for the OS to free up your socket until you can try again.

I have downloaded itunes numerous times with no success. When I click the icon it says that "itunes has stopped working" and then says that "itunes was not installed properly. It provides an error message code, but it overlayed by another message.

I downloaded itunes. It initially indicated that the download was successful, however, when I click the itunes icon, it says "ituns was not installed properly". It then gives me the message "itunes has stopped working"

Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
ALSO, if you feel like all your music will be gone as well follow through these 2:
> Downloading past purchases from App Store, iBookstore, and iTunes Store
> How to use your iPod to move your music to a new computer
IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

Form open error, File already in use

Hello,
if i wish to open a FMB file just by click on the file name inside the explorer (NT4.0)
i got the message, 'file already in use'
and then i can open the file. But the message is wrong, because i have not opened the file befor.
Any help

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nandlal Govan ([email protected]):
Delete the existing association with fmb .
Create a new one. This solves this problem.<HR></BLOCKQUOTE>
Hello,
you mean the association withhin the NT environment ? Will do so and test it.
Thank's for your help
Wolfgang
null

N95: Messaging Error --"Messaging:Already in use!"

Hi all...
I need ur help... My phone cant open messaging part.. If i try to do so, then this message will appear " Messaging: Already in use!".. i've tried *#7370# to restore it but still the same problem is still happen.. What should i do? please help me...
Solved!
Go to Solution.

no i do not think it is a virus. did you try updating to the latest firmware for your phone? it should be v. 30 or v.31....
to check your version plug in *#0000# and post here what version you have
also DID YOU REMOVE your memory card? and tried to plug in the *#7370# code? also try taking the battery out for 5 min or so after you perform reformat code. after 5 minutes put it all back together without the memory card and turn it on and see if there is any change.
Message Edited by radical24 on 31-Jan-2009 10:16 AM
Message Edited by radical24 on 31-Jan-2009 10:17 AM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

TS3074 I have an Error Message 7 (14001) says itubes was not installed properly to reinstall. Have done this but still will not open still gives me that error.

I have an Error Message 7 (14001) that says Itune was not installed properly, to reinstall.
I have tried this twice to no avail.... any answers ? Thank You

Hello Debbie,
Thank you for the details of the issue you are experiencing with iTunes. It sounds like you have tried reinstalling iTunes twice, but you may need to reinstall Microsoft's .NET Framework:
Resolution
This issue may be caused by a bad installation of a version of Microsoft's .NET Framework. It's important to note that versions 2.0, 3.5, and 4.0 can all exist side-by-side. Click the arrow next to your OS to reveal links to the versions of Microsoft's .NET Framework that are applicable to your OS; you will need to download and install ALL of these. These links will take you to a download page. Click the download button on this page and click Save in the subsequent window to save the installer to your Downloads folder.
Windows XP:
Microsoft .NET Framework 3.5 SP 1Microsoft .NET Framework 4.0
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0a391abd-25c1-4fc0-9 19f-b21f31ab88b7Windows Vista:
Microsoft .NET Framework 3.5 SP 1
Microsoft .NET Framework 4.0
Note: Microsoft .NET Framework 2.0 is already installed as part of Windows Vista. You can not modify the installation of this version of the .NET Framework in Windows Vista.
Windows 7:
Microsoft .NET Framework 4.0
Note: Microsoft .NET Framework versions 2.0 and 3.5 are already installed as part of Windows 7. You can not modify the installations of these versions of the .NET Framework in Windows 7.
To resolve this issue, run these installers one at a time and follow the instructions on screen to install each applicable version of the .NET Framework. If this version of the .NET Framework is already installed, you may see a screen similar to the one shown below.
If you see this screen, select Repair and then click Next to repair the installation of the .NET Framework.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Thank you for using Apple Support Communities.
Best,
Sheila M.

Satellite A200: Modem has an error 633: already in use or is not configured properly

Similar Messages

Maybe you are looking for