Satellite C70D-A-11T - Sound doesn't work with HDMI

Hello,
I have buy a Satellite C70D-A-11T and pass it on Windows 7 64 bits Home Premium.
I install all the drivers and I haven't any problems.
When I want to connect it to my TV for first time, I discover there is no sound on the TV.
I try to go on the speaker (near the clock of windows), right click, sound, first tab (I think it is "Playback" in english... I have a french Windows) and my device (TV) doesn't appear.
I come back on Toshiba Support website to download the last driver "HDMI Audio driver" for my laptop, I connect the cable, and it appear in the sound properties. I select it as my default device and the sound come right from my TV.
Great !
But when I restart my laptop (with or without the HDMI cable), the TV disappear from the list in the sound properties, the only one solution to recover the sound is to reinstall the HDMI Audio Driver.
If I start the driver installation with the "advanced" option, I have the list of drivers to install and I see all drivers are already installed, but the HDMI Audio Driver will be upgraded... I install it and it work until the next restart.
Could you explain me why the version of the driver don't stay on the system, and how to make it work without reinstall it everyday ?
Thanks a lot for your help.
Stephane

Anybody here ? :(

Similar Messages

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Sound doesn't work with one player but does with two...

I'm running the Win7 Release Candidate and have Flash Player 10 installed. Today when I tried to play a video on youtube, there was sound for a split second, and then it cut out while the video continued to play. I tried uninstalling and reinstalling Flash with no success. Then I tried opening up two tabs and played a video in each tab, and suddenly the sound was working again. This happens in both Google Chrome and IE8. I have normal sound in all other applications. Any suggestions?

is the driver for your network card up to date? that could be a reason it will not work with the more up to date HH3
If want more assistance from the forum members please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Apple TV doesn't work with HDMI Switch

Apple TV doesn't seem to work with my HDMI Switch. Tried every combination of cables. Tried switching all devices on and off at different times. Googled to see if anyone else has tried a switcher with Apple TV. All I know is: PlayStation 3 works just fine running through the switcher. Apple TV doesn't work at all with the switcher, only when plugged directly into the TV.
I only have one HDMI port on my Samsung HDTV and two HDMI devices (PlayStation 3, Apple TV). All my component slots are full and I already have a component switcher that's full, too. So HDMI is the only option for me.
Any ideas? Switcher claims to support HDCP... and it does do HD resolutions (PS3 displaying in 720p).

I use this 5x1 switch from Monoprice and it works fine, switching 3 devices, which are then routed through my AV receiver's switch... Despite the convoluted hookup, I have not had HDCP handshake issues.
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10110&cs_id=1011002&pid=2777&seq=1&format=2&style=
The nice thing about this switch is:
1. It works: no discernable loss in quality, switches relatively quickly, etc.
2. It's cheaper than many others, like Gefen, or even the Xtrememac (which is 4x1)
3. The remote has discrete buttons for each input, which is very helpful when setting up a universal remote like my Harmony 880. I can't tell from the Xtrememac picture if it's a direct input, or if you can only cycle through the inputs...
Good luck!
MacBook Mac OS X (10.4.9)

After 10.4.6 upgrade, sound doesn't work with certain apps.

Hi,
I upgraded recently to 10.4.6 and I've noted that there's no sound at all in certain applications. At the beginning, some games didn't work: Age of Empires II, Age of Mythology and Doom (curiously, I can hear music but no sounds in all of them). But later on I saw that the problem affects Virtual PC as well (approximate translation from original Spanish message): "Virtual PC can not reproduce sounds - Virtual PC couldn't start Macintosh audio system. This problem may be solved with a more recent version of Mac OS".
In addition, I neither hear sound in streaming services like YouTube.com.
Rest of the sound (system sounds, music, movies and so on) work perfectly.
Any idea? Thanks a lot in advance.
Regards.

alfonsator,
Welcome to Apple Discussions.
No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4) may provide an answer for your question.
;~)

Satellite M40-307: Accessibility utility doesn't work with limited user account

Hello everybody,
I have got a Satellite M40-307 (PSM44E), and I have got a problem with the "accessibility" utility, that displays an icon in the Windows XP notification bar, to let the user know whether the "Fn" key is active or not.
That this utility would not work for the administrator would not worry me a lot, as the administrator is supposed to know what he does. But the limited user does not have access to it, this more bothering.
In an administrator session, this utility works pretty fine. But in a limited user session, if I try to launch it by [runas /user:admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
I am answered that the file TCMSVR.DLL cannot be found. If I launch it normally, a message tells me that this utility requires I am connected as an administrator.
So, what can I do to use this utility normally, i.e. in a limited user session*?

Hello Markus,
Did you read ?
I executed TACSPROP with the admin rights, and it does not run.
So, to follow you, I had a look, on TACSPROP.EXE and TACSPROP.DLL, the users had "read/execute" and "read" rights. I provided "full rights", and it solved nothing.
Obviously another program must be launched before, that is by default launched only by the administrator, and I am searching what program it is.
Thank you.

HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.

Mplyer sound doesn't work, instead amarok's sond work !!!

hi everyone, the problem is that mplayer's sound doesn't work.
the sound with Amarok and Firefox(e.g youtube) works, but with mpalyer no !!!
i've posted some commands:
thanks
/etc/mplayer/
codecs.conf example.conf input.conf
/etc/mplayer/example.conf
# MPlayer configuration file
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per-user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
# The configuration file settings are the same as the command line
# options without the preceding '-'.
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.
# video settings #
# Specify default video driver (see -vo help for a list).
#vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
# mode to use (read from fb.modes)
#fbmode = 640x480-120
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
# vertical frequency range
#monitor-vfreq = 50-90
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
# audio settings #
# Specify default audio driver (see -ao help for a list).
#ao=oss
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Output audio to S/PDIF
#ao=alsa:device=spdif
#ac=hwac3,hwdts,hwmpa,
# other settings #
# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856
# Pretend to be Quicktime
# Fixes playback for apple.com/trailers redirects
#user-agent="QuickTime"
# Pretend to be Realplayer SP
# Fixes playback for some video streaming sites
#user-agent=RMA/1.0
# Pretend to have lots of bandwidth
# Speeds up realmedia rtsp:// streams
#bandwidth=2000000
# Pretend to be Winamp
# Fixes playback of some NSV streams
#user-agent="Winamp NSV Player/5.12 (ultravox/2.0)"
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
# Use 8MB input cache by default.
#cache = 8192
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# Profiles #
# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.
[protocol.dvdnav]
#vc=ffmpeg12,
#mouse-movements=yes
#nocache=yes
#[vo.vdpau]
#vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau,
# Most video filters do not work with vdpau.
#vf-clr=yes
# OSD progress bar vertical alignment
#progbar-align=50
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
~/.mplayer/config
# Write your default config options here!
# [default] viene applicata a ogni file
[default]
# usa il server grafico X come video output
vo=xv
# usa alsa per l'audio output
ao=alsa
# ao=oss # Use OSS4
# decodifica multithreaded H264/MPEG-1/2 (valido: 1-8)
lavdopts=threads=2
# impostare il canale audio preferito (in questo esempio il numero sei)
channels = 6
# scala i sottotitoli al 3% della dimensione dello schermo
subfont-text-scale = 3
# non usa fontconfig
nofontconfig = 1
# aggiunge bordi neri ai filmati che non hanno lo stesso aspetto di forma dello schermo
# per wide screen monitors
vf-add=expand=::::1:16/9:16
# per non wide screen traditional monitors
#vf-add=expand=::::1:4/3:16
#profilo di up-mixing da due canali audio a sei canali
# use -profile 2chto6ch to activate
[2chto6ch]
af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
#profilo di down-mixing da sei canali audio a due canali
# use -profile 6chto2ch to activate
[6chto2ch]
af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
# Disabilita screensaver
heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
stop-xscreensaver="yes" # stop gnome-screensaver
ls /etc/modprobe.d/
alsa-base.conf snd-hda-intel.conf
etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=1
options snd_hda_intel index=0
/etc/modprobe.d/snd-hda-intel.conf
options snd-hda-intel model=auto
cat /proc/asound/modules
0 snd_hda_intel
lsmod |grep snd
snd_hda_codec_hdmi 30162 1
snd_hda_codec_conexant 36759 1
snd_hda_intel 37000 2
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7210 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd

Neburski wrote:
ryanjacobs wrote:So, apparently, your system cannot find the ALSA output driver. I suggest that you use a different driver than ALSA.
OP should first go through the wiki page of ALSA to ensure that his ALSA setup is working correctly. There aren't many sound setups that do not work under ALSA. If OP is relying on another sound setup then he should follow the appropriate wiki and tell us so.
@otto88: It would also help if you would try to explain what your intentions were. I'm assuming you merely want to have sound working and not configure some fancy setup. In that case you should just stick to a basic setup and follow the wiki step by step (don't skip any line and if you don't understand something, you figure that out or you ask people, don't just ignore it).
For instance I don't even have those /etc/modprobe.d/alsa-base.conf and /etc/modprobe.d/snd-hda-intel.conf even though I have 2 sound devices, while you seem to only have 1 sound device
otto88 wrote:cat /proc/asound/modules
0 snd_hda_intel
So your /etc/modprobe.d/alsa-base.conf in that case is totally unnecessary, let alone that you don't even have the snd_mia module loaded so why do you even configure alsa to load it at index 1. You aren't supposed to simply copy and paste the configurations from the wiki. Those configurations are merely there to give you an idea on how to make your own configuration.
When you have ensured that your sound is been set up correctly then you can start with the most basic mplayer configuration. You keep the /etc/mplayer/example.cong configuration file totally commented out (like you have atm) and your ~/.mplayer/config should only contain
ao=alsa
ok i just followed the wiki and your advices and doesn't work, yet
mplayer -ao alsa /dati/Musica/StudyDue.mp3
MPlayer SVN-r36498-snapshot-4.8.2 (C) 2000-2013 MPlayer Team
206 audio & 433 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dati/Musica/StudyDue.mp3.
libavformat version 55.19.104 (internal)
Audio only file format detected.
Load subtitles in /dati/Musica/
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 22050 Hz, 2 ch, s16le, 32.0 kbit/4.54% (ratio: 4000->88200)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO_ALSA] Playback open error: No such file or directory
Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
Exiting... (End of file)

My sound doesn't work, how do i reset my mac?

my sound doesn't work, how do i reset my mac?

Reset PRAM. Some sound settings are stored in P-ram.
Check System Preference > Sound > Inline Speakers is highlighted.

After upgrade my iphone 4 to IOS6, sound doesn't work correctly

After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Satellite C70D-A-11T - Sound doesn't work with HDMI

Similar Messages

Maybe you are looking for