Satellite L300-110 - How to recover without loosing data on the HDD?

Hello all
I have a Toshiba Satellite L300-110
The question is how can I recover my laptop with the recovery DVD without lose any data located in the hard disk drive?

Hello
A recovery installation from the recovery disk without loosing data on the HDD isnt possible. If you use the Toshiba recovery disk the whole HDD will be formatted so you must backup the data first.
The only way I know is to use the HDD recovery function in the advanced boot menu. The HDD recovery function formats only the first partition of the notebook and all data that you have stored on the second partition are available after recovery.
Greets

Similar Messages

Satellite L550D-13V - How to recover without recovery disks?

Hi together,
I got a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.
I tried to repair but it doesn't work. So I decided to recover via HDD Utility.
Everything seems to be okay but in the end the tool said that errors occured. I tried to recover again but the process aborted with bluescreen "PAGE_FAULT_IN_NONPAGED_AREA" this time.
After reboot system told me that no bootmgr is available. I tried to boot by using recovery disk but it also seems to be faulty because the system cannot not boot from the disks.
And there's my problem. I am unable to boot / recover now. Volume D seems to be okay - the HDD utility files are still available but I cannot create new recovery disks and it is not possible to boot into HDD utility tool.
Do you have any ideas?
Many thanks in advance and regards
Danny

Hi
The story is strange
Im wondering why you are not able to boot from the Recovery disk?
Did you use the created recovery disk in the past or did you try this disk for the first time?
However, regarding the error message: PAGE_FAULT_IN_NONPAGED_AREA
I googled for that and it seems that this could be related to memory fault.
Possibly one of the modules malfunctions.
Of course this is just an personal opinion
If an HDD folder is available on your HDD, then there is a small chance to get the HDD recovery to work. Here a interesting thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40790

Toshiba Satellite L40 15g - How to recover without CD

Hello,
I have a problem:
I want to recover Toshiba Satellite L40 15 g with Windows Vista Home, but i don´t have the cd's because this computer was offered to me by a uncle.
What i have to do?

Probably this one from Portugal.
Satellite L40-15G (PSL48E-01T00GPT)
Downloads are here.
You may be able to recover directly from an image on the hard drive. If not, order the recovery disc from Toshiba.
Toshiba Europe Backup Media Online Shop
See the section System Recovery Options on p. 3-8 of the User's Manual (attached).
-Jerry
Attachments:
L40UsersManual.pdf ‏3615 KB

Satellite C660-1LD: How to recover and go back to factory settings

Hi Guys,
I am suffering with some problem on any website some words linked and when I click it, a ad. website opens which is kinda virus i think and the laptop works very slowly
I decided t reboot the laptop and go back to factory settings.
Could you please help me how to reboot I am not really good at computering so if you explain step-by-step That would be fantastic.
Thank you

Hi
Read the threads here in the Toshiba Product Recovery forum.
Additionally check this documentation how to use the HDD recovery:
+How to recover a Toshiba notebook with the HDD recovery procedure+
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

Can an Apple store restore my iPod without loosing data?

Can an Apple store restore my iPod without loosing data?

The only way to unlock it is to follow the steps in http://support.apple.com/kb/HT1212 or one of the similar knowledge base articles, which includes restoring the device. If you have a current backup you can do that and remove the passcode.

Can I add an external HDD Drive to my Satellite L300-110?

How can I add an external HDD Drive to my Toshiba Satellite L300-110 laptop and does Toshiba supports adding such type of HDD Drives to the laptops?

Hello
External HDD can be connected to every PC or notebook. External HDD will be connected to USB ports. On this picture you can see how it looks like.

How to convert NTFS external hard drive to FAT32 without loosing data?

New mac user. How to convert NTFS external hard drive to FAT32 without loosing data?

You have to off load and backup then.
don't have backup drive ?
Get one.
Want another option? Paragon NTFS for OS X will provide write function to your drive, works with the most PC cases and drives (not all NTFS drivers for OS X do) and does so with fast I/O and low overhead.
Not sure about using Seagate GoFlex as I seem to recall a number of threads reporting problems.
Windows can do a convert -fs to NTFS just never tried the reverse from NTFS to FAT32 but I would not use FAT. I'd either erase and reload and use as Mac HFS Extended; or if you actually do need to use it with a PC user running Windows, the driver would be handy and better.
Or your PC w/ Windows there are HFS drivers for Windows to mount and WRITE to a Mac formatted drive under Windows. There MacDrive has more and better support feature set.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

HT201269 How do I transfer all the songs in my Iphone to the itunes on my new laptop without loosing any of the songs?

How do I trans ogfer all the songs in my Iphone to the itunes on my new laptop without loosing any of the songs and to start syncing the songs on my iphone with itunes?

You need to use a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
You can Google for more. Google for : iPod to computer

How do I update I pad on a new computer without loosing data. Old computer got virus and it's got my I tunes account on it.

How do I update I pad on a new computer without loosing data. Old computer got virus and it's got my I tunes account on it.

You simply sync the iPad to the new computer. It will tell you that it is already synced with another one though, and will give you the option to erase it or transfer its contents to the new one. An iPad can only be synced with one computer at a time.
Beware that only your iTunes and App Store purchases will sync. If your iTunes library contained music obtained from other sources, you have to find a way to transfer them directly from your sick computer to the new one.
I hope your new computer is a Mac, a replacement PC will eventually suffer the same fate.

I'm shooting great white screen but when I key out the white background, I have a very thin white outline around my person that I don't know how to soften without loosing some facial opacity. Any suggestions?

Hi,
I'm shooting white screen and FINALLY have my lighting, white balance, exposure and focus making a great looking, crispy clip! But when I key out the white background in a short segment, I'm left with a very thin, white outline around my person that I don't know how to soften, without loosing facial opacity. I only tried using the 'Edges' tool. Any suggestions?
Thanks!

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

How do i pgrade my os without loosing data or using extra hdd? Thanks

How do i pgrade my os without loosing data or using extra hdd? Thanks

Yes, you can do that, but it is inadvisable to do so without a safety backup. But that's your choice, which means there is no guarantee you won't have a problem.
First thing you should do:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

I have macbook pro 13.3 inch ..mac os lion 10.7.5 i want to tranfer data from macbook to external hard disk without loosing data which in already in extrnl drive

i want to take back up of my macbook . so i have external hard disk around 1 tb and already have 230 used ...when i transfer manually with out time machine ....because i want to tranfer into windows .....so how to change ntfs into fat32 without loosing data in external harddisk ?

You don't have to change NTFS to FAT.
Just install Paragon NTFS and you'll be able to transfer your data to your external HDD even if it is NTFS.

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

Anyone know of a good way to move finalcut pro X to an external HD without loosing any of the project files?

Anyone know of a good way to move finalcut pro X to an external HD without loosing any of the project files?

If you're looking for improved performance, you should move your events and projects to an external FW800 or faster drive.
The FCP X application itself should reside in your Applications folder on your system drive.
If you're talking about backing up to another drive, I use a cloning application (SuperDuper) to clone my working drive to my backup drive two or three times a day.
If you want to install FCP X on another computer, simply download it again from the App Store (using the same Apple ID you used to purchase the app).
Andy

Satellite L300-110 - How to recover without loosing data on the HDD?

Similar Messages

Maybe you are looking for